Setting password on Simulator

Similar Questions

• How can I set password lockout policy on the XP Home Edition...

  How can I set password lockout policy on the XP Home Edition...

  Hi Gafoor0,

  The question you have posted is better suited in the TechNet forums. Please see the following link for more information.

  Windows XP IT Pro category

  You can also check:

  Microsoft Windows XP - account lockout policy

  The passwords and policies in Windows Server 2003

• CCTK - set password

  Hello

  I want to set password 'Admin', 'System' and 'internal (HDD)' using CCTK.

  I found and tested the command for "Admin", but I can't find the commands for 'System' and 'internal (HDD).

  Any ideas?

   

  Hello

  You can activate/Set ADMIN password using below command:

  Overall: Cctk - setuppwd = PASSWORD

  Claire: Cctk - setuppwd = - valsetuppwd = PASSWORD

  You can activate/Set SYSTEM password using the command below:

  Overall: Cctk - PASSWORD = syspwd

  Claire: Cctk - syspwd = - valsyspwd = PASSWORD

  You can activate/Set HDD password using below command:

  Overall: Cctk - hddpwd = PASSWORD

  Claire: Cctk - hddpwd = - valhddpwd = PASSWORD

  And also you can reference suite link for enablement PPT password disk HARD http://www.slideshare.net/artisriva/cctk-support-for-setting-hdd-password-30009931?from_search=1

  Thank you

  Sissy

• ATG 10.1.2. How to set password BCC by CIM?

  I'm new to 10.1.2 version, trying to install and configure properly to learn it. With CIM, I configured and set the editing, Production and staging of instances.
  
  I ran BCC after installation (8180/atg/ICC) and was invited to the password - admin/admin or merchandising/merchandising set by default in previous versions of ATG has not worked in 10.1.
  
  I learned from ATGInstallGuide that there is no predefined default password in 10.1.2 and I have to put them well CIM. (Or ACC)
  
  What is said here:
  * "By the CIM. During the post-installation process, CIM invites you to set passwords for the *.
  * default profiles that your environment requires «*»
  
  I remember I once asked a password for the user of merchandising only, and the password I put cannot Bcc, so, probably, it was for something else.
  
  Advise please, how to set BCC default account passwords (admin, merchandising and etc.) in the ICD? I do not see this option in the CIM - I have everything in the CIM and did not find it
  
  Just in case where there is a list of options THAT CIM gives me after running:
  
  [1] configuration of database - made
  [2] server Instance Configuration - made
  [3] application Assembly & deployment - done
  [P] product selection - made (reference store Oracle ATG Commerce &)
  Site Administration ATG-short integration & ATG)
  [A] select the Application Server - fact (JBoss)
  * [Custom Plugin CIM C Launcher]
  
  I'm still not able to open the application of ICC
  
  Published by: 994398 on March 17, 2013 17:36
  
  Published by: 994398 on March 17, 2013 17:37

  CIM will ask new passwords when you select Create Schema and import the data. If you have forgotten the pwd given by you, you can reset it.

  Check the below discussions about a similar question.

  ATG 10.1.1 BCC - by default admin password

  not able to connect to admin ATG Dyn

  See you soon
  R

• Tecra R950 Intel SSD 520 and SSD set password = F4 BSOD after reactivation

  Hello
  follwing problem:
  Tecra R950 with Intel SSD and HDD/SSD series 520 passes together = always F4 BSOD after activation of the standby mode.
  OK with no password set.
  OK with Hibernate.
  Same problem with iastor and msahci driver.

  Any ideas? Think it's a problem with the bios. He goes down the ssd when wakeup, same cannot write a dump of memory (error 0xc0000010), the necessary cold start-up.
  Steve

  Hello

  Replace the SSD drive?
  As far as I know a lot of the Tecra R950 was equipped with a 500 GB HARD drive.

  I could be linked to the SSD drive

• Set password Linux ATA hard drive / Toshiba Satellite Pro U200

  Sorry for the long post, but I want to be as specific as possible:

  1)
  I use a Toshiba Satellite Pro U200 under Linux (OpenSUSE) for some years now. Works fine without problems so far, even the fingerprint reader works. I deleted and never used the Windows XP preinstalled.

  For security reasons, I have now decided to put a HDD ATA password, in case the laptop is lost or stolen (changed drive for a disk Seagate Momentus 7200 FDE.2 SATA II with full encryption of the disk material).

  In order to get the protection offered by the full disk encryption, I need to set a password for the ATA. During startup, the Bios must request the password and unlock the drive only when the password is correct.

  2)
  My problem is: in the Toshiba laptop it is impossible to set the hard drive ATA password directly in the bios (as is possible in HP laptops, for example). Toshiba there is only one way to set the password to disk, which is a software utility for Windows XP (named 'Assist'). But I don't want to change the operating system only to set this password.

  3)
  Therefore, I tried the linux instructions

  hdparm - user-master m - security-all-pass SecretMasterPassword/dev/sda
  hdparm - user-master u - security-all-pass SecretUserPassword/dev/sda

  which are used for adjustment ATA passwords. Indeed, at first, it seems to work very well. The password is set and the drive is locked.

  4)
  When I restart the laptop, the Bios the HDD password request, as it should do.

  But he does not accept the SecretUserPassword prior to seizure. The answer is "wrong password", or similar.

  5)
  Analysis:

  I have no doubt that the password has been set correctly: I checked by restarting the laptop through rescue DVD in linux and unlock the disc via

  hdparm - user-master u - safety - unlock SecretUserPassword/dev/sda

  in order to use it. No problem, it works as supposed to. After the release, the disc is usable as usual. And I can also disable the password via

  hdparm - user-master u - security - disable SecretUserPassword/dev/sda

  After you disable the password, the laptop starts normally again, but I have no password.

  When I re-enable the password bios Toshiba again asks the password during initialization, but does not accept the (correct) password on entry.

  6)
  Does anyone have an explanation for this behavior?

  Bios Toshiba has somehow changes the password entered by the user, before being sent to the disk? I think that this would be inconsistent with the ATA standard.

  Anyone managed to set/change the password to ATA in a way that the disc can be unlocked via the internal order of the Bios, without installation of Windows XP and the Toshiba Software 'Assist '?

  Thanks for reading this long post so far. Any response is welcome.

  hmetz

  Hello

  As you probably know Linux is not supported by Toshiba and if you n t get some good advice here I recommend you to visit a few Linux forums and try to discuss with experts in Linux it.

• Satellite L70 - A - 13P - cannot get into BIOS after the BIOS setting password?

  HI, Satellite L70 - A - 13P

  I set up a password user and supervisor. Works very well. However, I can't get into bios. If I press F2 as usual, I have the box "enter password" (the same as for normal startup). After you type the password for the supervisor, computer continues initializing and do not get into the bios!

  I keep the key pressed F2 but nothing works.
  I also tried ESC, F1, INS, F12, 0.

  Help.

  User and supervisor password the same?
  Have you been able to get into the BIOS in the past?

  Proceed to a complete stop and restart the laptop. Then try with F2 or F12. When you will be asked to set supervisor password and I hope that you will be able to enter the BIOS settings.

• How can I set password BIOS and HDD on the Satellite A100?

  Hello

  Someone know how to set a new A100 with Vista, so he asks a password at startup and a password to access HARD drive. It seems to be shaded in the BIOS!

  Thank you very much
  Bob

  Please check in the Toshiba Assist it security options, you can assign a few passwords.
  But make sure that the password disk HARD unknown cannot be removed and if you have forgotten this password disk HARD is not more accessible

• Set password hard drive and now can't unlock!

  I have a brand new T410s who has 1.34 BIOS factory installed. I used the BIOS option to set a hard drive password, choose the option 'user' (not ' user + master'). As I was just testing, I put an easy to remember the password "password". It has a Samsung SSD. However, now it does not accept "password" to unlock the drive and won't let me not in the BIOS unless I have remove the disc before feeding! Y at - it a bug with setting the drive of this new BIOS passwords? I had several Thinkpads over the years and have never seen one that...

  Hmm, thanks for the interesting reference. However, in my case, it seems that I'm the one that randomly changed my password when the keystroke! I tried some typo were variations and it unlocked with 'passwprd"instead of"password "!

• TMS 13.2 set password Admin HTTPS through configuration for the Codec C series model

  We have more than 100 sets of C Codec managed by TMS, I made a model of configuration, including the password for "Admin" model, but it seems that what I put in model is not push to the Codec. What is the correct model for it

  We appreciate your help

  Thank you..

  Hello Randy.

  In my models for TMS, I use the following field to push admin password for codecs.  Since I first tried this option and it worked, I have never tried the other password fields that can be listed in the models.

  Definition: password

  System type: other type

• If the profile: will be changed, don't needs the user to set password.

  Hi people,

  just have some confusion bit, I have a profile user is changed, it will set the user password? Please notify

  Kind regards.

  just have some confusion bit, I have a profile user is changed, it will set the user password? Please notify

  # Evolution of the profile of the user is different from the re-setting the password.  When you change a user password reset profile depends on password_ * attributes to a new profile.  The profile is a set of attributes that apply to the user. You can find different profile password_ * attributes to.

  http://docs.Oracle.com/CD/E11882_01/server.112/e41084/statements_6010.htm#SQLRF01310

  HTH,

  Pradeep

• Cannot set password when you deploy vMA 5.0

  Hey all -

  Okay, I have looked around and can't seem to find anyone else with this problem.  I have jusy deployed a bifurcation brand new VMA 5.0, but I can't deploy it as I'm stuck setting vi-admin password on initial startup. For each password that I get, I get "Sorry, the passwords do not match."  Now, I tried this dozens and dozens of times, with different passwords, had other people are trying to set the password, all to nothing does not.  Note that this has nothing to do with the complexity of password; who spits a different error message.  Anyone who encountered this? Is there a way around this part to deploy?

  Thinking that the error may be with the "Old Password", I tried just hitting < return > for the old password, as well as "admin", "vi admin", "vmware" and a few other common assumptions, but it is only out of desperation that what I found in the docs and online indicate that the default password is empty.  ARGH!  Any help or suggestions would be welcome!

  Thank you

  -c

  PS - one thing I have to do during the deployment was disable VAPP (settings-> Options-> TIME), so that I could do to turn it on without creating an IP pool. I don't see how this could be a problem (and cannot depend on the virtual machine without doing!).

  I think I know what you may be facing, take a look at this VMware KB on repeat the http://kb.vmware.com/kb/196 character because you typed a password, you can't really see, but I think it's your problem (I been faced with this before as well)

• How to unplugged the set password for the user identified externally?

  DB version: 11.2
  Operating system: Solaris
  
  For the unix wmapp user I created a DB schema called OPS$ WMAPP as below

  create user OPS$WMAPP IDENTIFIED EXTERNALLY  default tablespace USERS temporary tablespace TEMP;

  But I put a password for this user using password command by mistake. Now, the unix user becomes

  ORA-01017: invalid username/password; logon denied

  How can I remove the password I had set? That is to say. I don't want to put any password for this user.
  
  Tried to put the password to null. It did not work

  SQL> PASSWORD OPS$WMAPP
  Changing password for OPS$WMAPP
  New password: 
  Retype new password: 
  ERROR:
  ORA-00988: missing or invalid password(s)
  
  
  Password unchanged
  SQL>

  I can't recreate this user as he has already spent in production with business objects
  
  Published by: Ken_73 on November 1, 2011 02:33

  Not sure it works so simple, but you can try

  ALTER user identified xxx outwardly;

  Currently (by mistake) the userid password authentication, you may be able to restore it.

  Werner

• Setting password for registered listener

  Hi all
  
  I have a query:
  I've set up my interlocutor, here are the details of my listener.ora:
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (SID_NAME = AURÉLIE)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  )
  (SID_DESC =
  (GLOBAL_DBNAME = test9i)
  (ORACLE_HOME = C:\ORACLE9I)
  (SID_NAME = test9i)
  )
  )
  
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  (ADDRESS = (PROTOCOL = TCP) (HOST = bmfhoopd026. BSLI.COM) (PORT = 1521))
  )
  
  My databases are on 9i and 10g
  
  I registered both my databases by using the command "edit the system registry.
  Now, I've renamed my listener.ora to something else and restart the listener services.
  This is the State of my interlocutor
  LSNRCTL > status
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  For 32-bit Windows TNSLSNR version: Release 10.2.0.4.0 - production
  ction
  Start date 16 - SEP - 2009 15:11
  Uptime 0 days 0 h 6 min 50 sec
  Draw level off
  Security: password or OS Local Authentication
  SNMP OFF
  Listener log file C:\oracle\product\10.2.0\db_1\network\log\listener.log
  
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = bmfhoopd026. BSLI.COM) (PORT = 1521)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = bmfhoopd026. BSLI.com) (port = 8080)) (Pr
  (location = http)(session=RAW))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = bmfhoopd026. BSLI.com) (port = 2100)) (Pr
  (location = FTP)(session=RAW))
  Summary of services...
  Service "Aurélie" has 1 instance (s).
  Instance "Aurélie", State LOAN, has 1 operation for this service...
  Service 'ajinkyaXDB' has 1 instance (s).
  Instance "Aurélie", State LOAN, has 1 operation for this service...
  Service 'ajinkya_XPT' has 1 instance (s).
  Instance "Aurélie", State LOAN, has 1 operation for this service...
  Service 'test9i' has 1 instance (s).
  'Test9i' instance, State LOAN, has 1 operation for this service...
  Service 'test9iXDB' has 1 instance (s).
  'Test9i' instance, State LOAN, has 1 operation for this service...
  The command completed successfully
  
  
  My query is, as it can be seen that lsnrctl > status, command does not show my location of the listener.ora file. Now, I'm trying to add a password to my interlocutor, but when I run the comand save_config, it gives the following error:
  LSNRCTL > save_config
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  [NL-00051: internal error code, arguments: [302], [1] [] [] [], [],]
  
  Also in my listener.log it gives the following error:
  16 - SEP - 2009 15:13:47 * save_config * 2
  32-bit Windows error: 2: no such file or directory
  16 - SEP - 2009 15:14:15 * save_config * 0
  16 - SEP - 2009 15:14:49 * change_password * 0
  16 - SEP - 2009 15:14:56 * save_config * 2
  32-bit Windows error: 2: no such file or directory
  16 - SEP - 2009 15:15:02 * save_config * 0
  16 - SEP - 2009 15:15:15 * change_password * 0
  16 - SEP - 2009 15:15:21 * save_config * 2
  32-bit Windows error: 2: no such file or directory
  
  Any idea how I'm supposed to make a listener protected password in case where I got my pmon itself register with the listener?
  Any help from you guys would be really appreciated. My apologies if the format is not for reading, using forum for the first time.
  
  Thank you
  Aurélie Mustapha

  user11908006 wrote:
  Hello
  I agree with what you say, but in my scenario, there is no listener.ora in my ORACLE_HOME\network\admin $, then of course, when I'm trying not to put a password that he will not accept coz there is no listener.ora so he can write the encrypted password in... my query was, if in one such scenario is there anyway where we can set a password for the listener... but as you said that if I'm going to have a default listener then why would I need password... I completely agree with you... so is it otherwise otherwise

  If you want to password protect your listener, this password is stored in listener.ora. Period.

  Apart from the creation of a mannequin listener.ora

  There is no such thing as a "dummy" listener.ora You set up you headset with listener.ora or you do not configure and go with default pure.

  and then adding the sid_desc and the service of database and then save it with it?... anything but that?

  Thank you
  AJ

  You do not need to include a section SID_DESC in your listener.ora. Your instances will still be with the listener. And if you include a section SID_DESC in listener.ora your, your instances will always register themselves with the listener - in addition the static record defined in the section SID_DESC.

• Cannot set passwords to disk for Qosmio G30

  I tried in vain to find documentation on how to do it-using the method F2 to enter the bios options never works, I tried to use config assist / utility password and cannot find any option. I updated the bios to 1.70

  Does anyone know how to access the bios to activate the hard disk password feature?

  If you don't see this option, I assume that it is simply not available. Sorry, but I don t have any other explanation. Verification of user manuals is there anything in password disk HARD on Qosmio G30. Did you also check?

  By the way: I'm not 100% sure but I think that HARD drive password protection is only on professional available Portege and Tecra laptop computer, not on a portable multimedia Qosmio series.