Setting the permissions of the application

Similar Questions

• How to set the Application Manager to install applications in a place?

  I'm subscribed to Adobe Creative Cloud. I downloaded Adobe Application Manager. I have a laptop with a 80 GB SSD (c) and (d) 1 TB data reader. I would like to install all the applications on my D drive, because I don't have the space on my C drive, and I want to keep this OS only.

  I found the instructions from Adobe on how to change the Adobe Application Manager installation path. I changed the settings to install in the directory path "D:\program files (x 86) \adobe\" of course that doesn't work sometimes.

  

  Some applications have been installed in the directory I specified. Somewhere, installed in the correct directory, but on the C drive. Then I used the update to Adobe in the tray system, a few days ago and now Adobe is to install applications in the wrong directory on the wrong drive.  "Program Files (x 86)(x86)?

  

  Then, it is almost impossible to find someone from Adobe to meet. Incredibly frustrating. I really don't understand how a basic installation function can then be screwed to the top.

  Does anyone have recommendations?

  When you connect creative cloud, upward in the upper right corner there is a gear wheel > preferences, you have 2 menu items, general and Creative cloud, select creative, select Install Location.

  Good luck!

• General protection fault with tabs and toolbars to the output of the application

  Hello

  It seems that if you have a tab control

  .. .and that tab has a tab with a child Panel control

  .. .and this child Panel has a sign callback function

  .. .and this same child Panel also has a toolbar

  .. .and you do not throw the toolbar when the application closes

  .. .and you do not throw the child Panel when the application closes

  .. .and you do not throw the Panel with the tab control when the application closes

  .. .the application will crash with a general protection fault after the return of the main function.

  Certainly, I consider really cela a bug so as much as there were several things wrong with the code I was working with in order to hit it (and once I set the application everything is fine), but it still took me a little time to track down, so I hope this post can someone put some time in the future.

  I have attached a small sample application that illustrates this problem on my PC in the case where an engineer OR wants to take a peek.  I'm under CVI 2012 SP1 on Windows 7 64 bit.  Thank you.

  I see that I was a little involuted in my previous answer. At Telegraph and hopefully more clear:

  • As indicated in aid, after the chaining of the callback function to the Panel, Panel callbackData should not be modified
  • (solution 1) If you just install a reminder rather than chaining one new this problem is not present
  • I suspect that the instrument of the toolbar handles callbackData parameter Panel. If this is true, you can:
  • Install the toolbar to a panel that does not have a chained reminder (solution 1), or
  • Install the toolbar BEFORE chaining (solution 2) recall: as you can see in the code for ChainPanelCallback, the instrument takes care of callbackData existing and manage correctly in all situations, including the Panel throwing

• Set the icon of the app for JDE 4.2.1.41

  Hello

  How to set the application icon in JDE 4.2.1.41? We already have an option in JDE 4.7.0.41 (project-> properties-> resources-> files of icons), but did not find such an option in JDE 4.2.1.41.  Please help me.

  Thank you

  -DK

  I was worked. ! I just added the following in the *.jdp file manually.

  [Icons
  ..\TestBB\src\com\test\img\test.png
  ]
  

  Thank you

  -DK

• How to set the color palette for the system colors for the visible record of all controls on the web page?

  The color scheme by default in Windows 7 (x 36, Premium family edition) offers a combination of a white background for the application windows and black text for information that are there.   But being a visually handicapped person, I find the white background rather irritating to the eyes, and I'd rather have a black background, with white text, as this combination gives me a comfortable environment to work on the computer for long periods.  When I set these colors according to my convenience, using the link ' Customize > window color > color and appearance of windows "and by changing only the colours of the just 'Windows' choice in the dialog box, I think the colors of several other controls, in particular the"Drop Down Lists","Framed"and"Buttons"are also changed, often to be the same thus making the information unreadable such controls.  As these color changes seem to be rather random and apparently 'unpredictable', I cannot set the application window, according to my convenience.  I'm not able to get any useful information from the link "Help and Support" of the STARTUP dialog, about the dependencies of the combinations of colors of controls, or the link dialog box "Customize > window color > color and appearance of windows ' lists all controls that are normally used in any typical web page.  After spending a lot of time and effort - and therefore actually "lose" my time at the computer - through several tests, with all giving them negative results, I am at a loss to get this problem is solved.  Furthermore, I can't go back to the default of origin either.  So my computer is idle for a very large part of the day.

  I would be really grateful to all users or personal assistance MS, who take the time to provide me with an answer to this problem and help me use the computer in a fruitful way.  I offer my sincerest thanks in advance to anyone who offers me a complete solution.

  Hello

  I suggest that you go through the Microsoft article and check if it helps.
  Turn on high contrast http://windows.microsoft.com/en-US/windows7/Turn-on-High-Contrast

• How to set the session value to field item?

  Problem: The table insert source column is different from the column I get data for the update. I assign session by a process during extraction value but this value does not get assigned to the field. ?? Can someone give me a solution to this?
  Thank you

  Hello

  When the extraction process runs while recording for the form, it will use the values that exist in the folder, thus crushing any value you defined in the session.

  One thing you could try...

  1 create an element of application - through shared components - called, say, G_DEFAULT_VALUE
  2. on the page element that needs this value, type: G_DEFAULT_VALUE in the parameter of calculation calculation Post
  3 - instead of set point on page in your process/calculation, the value of the element of the application instead

  Then, regardless of the value on the record, the value of the application element is used instead. If this is not required in all cases, set the application to null element and use the following options for the calculation of calculation of post parameter:

  NVL (: G_DEFAULT_VALUE,: PAGEITEMNAME)

  Then, if the application element is null, the value of the page element (that is to say, the value of the record) will be used instead.

  Andy

• The application's permissions

  Hello

  I created a first very basic screen of ListStyleButtonFields, they aren't going anywhere yet.

  Using plug-in in Eclipse.

  4.7.0 JRE.

  All signed.

  The application does not start when loaded on my 9780 (6.0), I have to go application management and the value of all permissions allow manually, and then only it starts. Also what method should I use to push a new screen when we if fields is selected?

  Thank you.

  Hello

  Here is a code example that shows how to push a new screen.  I hope this helps.

  package com.rim.samples.device.helloworlddemo;

  Import net.rim.device.api.ui.UiApplication;
  Import net.rim.device.api.ui.container.MainScreen;
  Import net.rim.device.api.ui.Field;
  Import net.rim.device.api.ui.component.Dialog;
  Import net.rim.device.api.ui.component.RichTextField;

  /**
  * This class extend the UiApplication class, providing a
  * graphical user interface.
  */
  SerializableAttribute public class HelloWorldDemo extends UiApplication
  {
  /**
  * Entry point for application
  @param args command-line arguments (not used)
  */
  Public Shared Sub main (String [] args)
  {
  Create a new instance of the application and make the currently
  who runs the thread of the application of the event dispatch thread.
  PAP HelloWorldDemo = new HelloWorldDemo();
  theApp.enterEventDispatcher ();
  }

  /**
  * Creates a new HelloWorldDemo object
  */
  public HelloWorldDemo()
  {
  Push a screen onto the stack in the user interface for rendering.
  pushScreen (new HelloWorldScreen());
  }
  }

  /**
  * A class that extends the class screen, which offers default standard
  * behavior for BlackBerry GUI applications.
  */
  final HelloWorldScreen class extends screen
  {
  /**
  * Creates a new HelloWorldScreen object
  */
  HelloWorldScreen()
  {
  Set the displayed title of the screen
  setTitle ("Hello World Demo");

  Add a text field read-only (RichTextField) on the screen. The
  RichTextField is active by default. Here, we provide a style
  parameter to make the non-active field.
  Add (new RichTextField ("Hello World!", Field.NON_FOCUSABLE));
  }

  /**
  * Displays a dialog box to the user with the text "Goodbye!" when the
  * the application is closed.
  *
  * @see net.rim.device.api.ui.Screen #close)
  */
  public void close()
  {
  Display a farewell message before closing the application
  Dialog.Alert ("Goodbye!");
  Super.Close ();
  }
  }

• set the permission of the Application

  Hi all

  I want to set the permission of the Application before calling the api specific rim, for example, Connector.open a HttpConnection.

  my request is too full, and after the first installation, it will pop up of dozens of dialog permissions to let the user confirm, who dislike the user.

  So I want to set the permission by using ApplicationPermissionManager.

  but everythime, when ApplicationPermissionManager.invokeRequestPermission, it will show a dialog box.

  My question is, is it possible to remove this dialog box and let my process to continue?

  Thank you

  It is not possible to set the permission automatically without user intervention.

  This is a security measure.

  The only way is to analyze what permissions should be set, make up the correct instance of AppPermissions and apply for permission to the user.

  If the user accept this request - all of the permissions provided to this request will be set on 'Authorized' status.

• "Enterprise network" permission not visible in the Application of the permissions

  Hello

  I have two devices of 8800 (v4.5) a configured with BES and another with the BIS.

  In our application during installation, we show the permissions dialog box if "Network server" permission is set to DENY using,

  newPermissions.addPermission (ApplicationPermissions.PERMISSION_SERVER_NETWORK);

  ApplicationPermissionsManager.invokePermissionsRequest (newPermissions);

  This fix on the BES device work, but fails with BIS device.

  On device BIS opens the permissions dialog box, but no permission is listed in the (Blank) dialog.

  Is one knows the reason why it does not work on BIS device?

  Comment:

  1 device, BES - for all permissions "Network of the company" installed application is visible in the list of the Application's permissions (Options > Advance Options > Applications > change permission)
  2. BIS device - for all permissions "Network of the company" installed application is never visible in the permissions list for the Application

  Thank you

  There are many methods, which include most analysis service log files. I suggest that you look at the source code of the NetworkDiagnostic tool available for free from RIM.

• Not to allow changes in the application's permissions

  Hello.

  Is it possible to ban a user to change permissions for the application somehow?

  Or disable access to the set of permissions application? I noticed that some Applications 'Software BlackBerry system' doesn't have an option to change the permissions or remove the application.

  This should be possible COMPUTING policy, ask your BES administrator to this topic.
  It is not possible programmatically.

• 6 Android: Skype asks for more permissions every time you start the application

  With the new 'permission management' in Android 6 Skype continues to ask the same permissions that whenever the application is open. Perhaps, it is not a desired behavior.

  As far as I know, applications are supposed to to request permissions only once after installation, unless authorisation is associated with some user action.

  Currently, Skype is always ask for 'access to contacts' and 'manage phone calls. "

  The problem has been resolved by an update recently.
  
  Thanks for fixing it!

• How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  I found a solution! -Set the size and position of the façade with the help of the

  File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).

  then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.

  OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.

• The message I get is Microsoft word has not been installed for the current user. Please run set up to install the application. I reinstalled the software, but get the same message.

  The message I get is Microsoft word has not been installed for the current user.   Please run set up to install the application.   I reinstalled the software, but get the same message.

  Hello
  
  See the methods listed in the articles below and check.
  You receive an error "Microsoft has not been installed for the current user" message when you try to start an Office 2003 program or an Office XP program for the first time
  http://support.Microsoft.com/kb/898512
   
  You receive a message "Microsoft has not been installed for the current user" when you start an Office XP program or start of Microsoft Office Maintenance mode
  http://support.Microsoft.com/kb/298022
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Set the size of the window for DOS applications running on the Windows XP Pro machine

  I have some old Basic (QBasic, Flodraw) DOS programs I still want to run occaisionally. 2002 was the last time I used them, so I don't know what OS was running then. When I run the application now that open windows are not ideally sized, the Flodraw is too big, I can't see it as much of the screen as I would, and QBasic is too small to get enough text to keep my train of thought.

  Anyone know how I can get control of the size of the window? I need create .pif or something like that?

  Thank you.

  Right click on the shortcut for the program icon, and then click Properties. You will see where you can set the size. MS - MVP - Elephant Boy computers - don't panic!

• Accidentally set the permissions to deny (full control) to a partitioned drive

  Hello
  I admit, I made a huge mistake.

  I accidentally set the permissions to "refuse (full control)" for a partitioned drive D:\.

  In the tab titles of the D: drive when installing deny.
  I had four groups of users listed in the permissions list: authenticated users, SYSTEM, administrator and user.

  I'm sure I've hit on two of the four only: authenticated users and users.
  SYSTEM and administrator should have been left with the permission to allow it. (This helps?)

  In any case, you would know by now, I'm done with permission settings denied inadvertently on my partitioned D: drive and need some advice and help to reset this permission setting.

  FYI, I tried to run "takeown /f D:" in the command prompt run as administrator, but it is "ERROR: access denied."
  Also "icacls D:/grant administrator: F" returned "access is denied. Treated successfully, 0 files; Could not process files 1.

  Help!

  This assumes that the only thing on the D: drive is given. Start the computer with a Linux Live CD/USB key and copy all data on D: on another hard drive (internal or external USB, it's not bad). Delete the partition with gparted while staying in Linux. So now that the drive is a white, gross dur.* shut down the computer and unplug it. Then boot into Windows. You should see the C:\ drive of course. Stop the computer again, then connect your new blank disc and boot into Windows. Use Control Panel > administrative tools > computer management > disk management to create a partition, format the drive and assign it a drive letter. I would like to use something other than D:. With luck, it could work to remove all the permissions on this drive. If so, then just copy your data where you saved using Linux on the 'new' drive Linux is not honoring the Windows permissions so that the data should not carry the old restrictions.

  For the distribution of Linux, I prefer Knoppix, but many people also use Ubuntu.

  http://www.Knoppix.NET
  http://Lifehacker.com/5504531/the-complete-guide-to-saving-your-Windows-system-with-a-thumb-drive
  http://www.howtogeek.com/HOWTO/17044/move-files-from-a-failing-PC-with-an-Ubuntu-Live-CD/
  https://help.Ubuntu.com/community/LiveCD

  * I hope I've interpreted your original post correctly and you have two physical hard disks. You wrote 'drive partitioned D:\ ". "so it is ambiguous to me. If you really have that one disc physics on which you have created multiple partitions you can try to make meanings (with the exception of the bit of course disconnect). I don't know if it will work then, but at least you'll have your data in any news for when you reinstall Windows.

  If you have installed * programs * on the D: drive then you can not do that and you have to reinstall Windows.

  Let me know what is happening and good luck.

  MS - MVP - Elephant Boy computers - don't panic!