setting up a vpn ssl to a netgear router

Similar Questions

• Need help to set up the VPN connection using my mobile

  Title: VPN

  I am running Windows Vista 32 with a NetGear WNR1000 router and need some giudance to set up a VPN with my phone Samsung Galaxy G3. Can someone help Sir with these steps?

  Hello

  Thannk you for the reply with the status of the issue.

  I suggest you go ahead and post the same question in the Microsoft Technet forum for assistance.

  http://social.technet.Microsoft.com/forums/en/itprovistanetworking/threads
   

• ASA AnyConnect VPN SSL

  I have already set up site to site vpn asa.

  Now, I want to create asa ssl AnyConnectVPN.

  Please help me with the configuration for all VPN connection?

  Configuration VPN SSL Clienless already on our asa

  "If I try to access to, the error is.

  Opening of session

  Connection refused. Your environment does not respect the terms of access defined by your administrator.

  Please notify this error for me. I changed the username and password may also.

  Thank you

  Aung

  Hey Aung,

  It's the best way to get rid of this message:

  WebVPN

  No csd enabled

  !

  dynamic-access-policy-registration DfltAccessPolicy

  action continue

  The reason why you see the message is because you have a dynamic access policy refuse your connection, because your system does not meet the requirements.

  HTH.

  Portu.

• Module AIM-VPN/SSL-2

  Does anyone know if the GRE tunnels can be used with the AIM-VPN/SSL-2 module for the Cisco 2800 series routers?

  Yes, we use it with GRE/IPSec.

  Hope that helps.

• WebVPN and remote vpn, ssl vpn anyconnect

  Hi all

  Differences between webvpn and remote vpn, ssl vpn anyconnect
  All require a separate license?

  Thank you

  Hello

  The difference between the webvpn and SSL VPN Client is the WebVPN to use SSL/TLS and port

  send through a java application to support the application, it also only supports TCP for unicast traffic, no ip address

  address is assigned to the customer, and the navigation on the web in the tunnel is made with a SSL

  Web-mangle that allows us stuff things in theSSL session.

  SSL VPN (Anyconnect) Client is a client of complete tunneling using SSL/TCP, which installs an application on the computer and

  envelopes vpn traffic in the ssl session and thus also an assigned ip address has the

  tunnel's two-way, not one-way.   It allows for the support of the application on the

  tunnel without having to configure a port forward for each application.

  AnyConnect is a client of new generation, which has replaced the old vpn client and can be used as long as the IPSEC vpn ssl.

  For anyconnect licenses please see the link below:

  http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/ANYC...

  Kind regards

  Kanwal

• 3005 & customer VPN SSL gone?

  I upgraded from 2 3005 to vpn3000 - 4.1.7.Q - k9... after that my SSL VPN client options are gone, used to be: Configuration | Tunneling and security | WebVPN | VPN SSL Client...

  This get removed from the latest releases and now I only have the mode of transmission by SSL VPN proxy on of the 3005? Can't seem to find it in the release notes...

  Razor head

  The problem you are having is due to the upgrade to 4.1. *, which is not the software package you need. You were previously using 4.7. *, which is the right one for SD/SVC.

  Ken

• What is the function of the IOS minimum set required for VPN site-to-site software?

  Hi guys,.

  I have a Cisco 1841 router to do a VPN site-to site. I would like to know what is the function of the IOS minimum set required for VPN site-to-site software?

  Thanks in advance.

  Hi Ja,

  Advanced security or more should do it. The version of the IOS, you can try later 12.4 T which is c1841-advsecurityk9 - mz.124 - 24.T5.bin, in which case you don't want to go to 15.1 still.

  I hope this helps.

  Raga

• I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500

  I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500.

  Hi Mark,

  Thank you for writing to Microsoft Communities. The description of your problem, I understand that you have problems setting up a homegroup with Windows 7 computer. Please correct me that I misunderstood.

  
  

  Mark, please don't worry I'll try my best to resolve the issue.

  I suggest to go through the following websites, which provide a detailed description on the homegroup and how to set up.

  Home Sweet homegroup

  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  Homegroup from start to finish

  http://Windows.Microsoft.com/is-is/Windows7/help/HomeGroup-from-start-to-finish

  If you're still having trouble to set up the residential group, please let us know. We will be happy to help you.

• Set up multiple vpn site to site

  Hello

  I want to configure VPN 2 between the same router as follows:

  R1-G0/0<---VPN1-->R2-G0/0

  R1 - Lo <--VPN2--->R2 - Lo0

  on this configuration, VPN1 is in place, but not VPN2

  All the IPS are routabled and pings on both sides

  Can someone help me?

  Thank you

  JP

  Hey, John, Paul,.

  Something like

  Crypto ipsec profile tunnel1

  transform-Set

  Crypto ipsec profile tunnels2

  transform-Set

  tunnel1 interface

  255.255.255.252 IP address

  source of tunnel

  tunnel destination

  protection of profile tunnel1 ipsec tunnel

  interface tunnels2

  255.255.255.252 IP address

  source of tunnel

  tunnel destination

  protection of ipsec profile tunnels2 tunnel

  And of course the same rinverted on the remote device

• AIM-VPN/SSL-2 facility in Cisco 2821

  Hi all

  I have the router cisco 2821 wit IOS version 12.4 (25 d)

  I also have encryption for this router Cisco AIM-VPN/SSL-2 Module.

  I have inserted this module to the location of the 0 OBJECTIVE but can not see.

  I found in KB:

  http://www.Cisco.com/en/us/docs/iOS/12_4t/12_4t11/htvpnssl.html#wp1067692

  but I have no 'cryptographic engine objective' command

  Router #crypto engine (config)?

  Unit? hardware Crypto Accelerator

  Embedded onboard Crypto engine

  software software encryption engine

  When the system starts up, I see:

  0004F4 PURPOSE UNKNOWN

  This who should I change to activate this module?

  Thank you.

  Julie,

  PURPOSE/SSL engines require

  IOS 12.4 (9) T at least while you are running older 12.4 main version.

  http://www.Cisco.com/en/us/prod/collateral/routers/ps5853/data_sheet_vpn_aim_for_18128003800routers_ps5853_Products_Data_Sheet.html

  Marcin

• Printer HP Inkadvantage 2545 - issue with setting up wireless home: Netgear router

  Recently bought HP Inkadvantage 2545.

  I want to connect to my home network wireless that will allow the mobile and portable on any room in my house feel.

  However, the Netgear router is unable to identify the printer on the network wireless... message "router and the printer are on a different network.

  I tried HP Diagnostics. If the printer appears on the 'list of printers', it is not recognized by the router to connect through the wireless router.

  Hi ADUTT,

  Welcome to the HP Forums!

  I see that you have problems connecting your printer to your Netgear router.

  What operating system you use on your laptop? Windows or Mac? What version?

  In the meantime, I suggest to view this guide. Installation of the software of the printer for a wireless network connection.

  Hope this helps and have a nice day.

• IP address connection sets using the VPN Client

  Hello world. I'm using a VPN Client when I establish a VPN Tunnel with a 1600 router, and I have a question.

  Can I assign a fixed IP address in the client, instead the router send to random addresses from customer?

  What I would he do this?

  It would be in the configuration of the VPN client, or in the configuration of the router?

  If so, I'm doing this?

  Do I need another tool, or other software or hardware to do?

  any help is hope...

  Thank you...

  Hello

  I don't think that there is a simple way to do this.

  However, if you create a different groupname for the user who needs a static IP address, I think you should be good to go

  So what you need to do, create a new pool of addresses. Make the start and end ip address be the same (this is the address to which you want to assign to the VPN user)

  Configure another ipsec on the router group and bind the new pool to this group

  Ask your VPN client to connect to this group

  Hope that helps

  Jean Marc

• Not able to connect to my netgear router

  I have my netgear router for almost 6 months now, and he has never given the satisfaction of a good wireless on the attic of my house. Repeaters wifi did not work, or are expensive for dual band. Now, I have connected my old linksys E3000 router, and everything seems to work. But I can't connect to my netgear router. I can't find via the routerlogin.net, nor using the netgear genius app on my ios device. The network is still there, I can connect trough wifi to internet both 2.5 g and 5 g, comments networks are here but I don't know what IP address uses the netgear (I can't find the linksys)

  How can I connect to the netgear?

  and of course I can return to the default settings and start all over again, but it is too easy to answer. How is it possible for me to connect to the router, how I am able to find in the current set up?

  Based on this, I would say that you set r7000 in ap mode and e3000 also in ap mode. Connect through a data cable in the case of PSI.

• HP C4580 not scan to PC. I need help to configure my Netgear router please :)

  Hello

  I've read here, the threads that talk about this printer prints only not to or from a PC - my problem is that the C4580 go scan from my PC, but will not scan to PC.

  I found an answer from someone who has had the same problem earlier this year, but I do not understand what to do.

  Here's the answer:

  "I have ordered mine entering the settings from my router (Netgear) page and setting the built-in firewall rules. "The internal firewall was blocking the printer, I could print, scan using the computer, just could not scan from the printer to the computer.

  Also, I have a Netgear router, but could do with help on how to do the same thing as the person above.

  Thanks in advance for any help!

  Sorry, I don't need help after all

  It was not the router requires a configuration, it is the firewall that was a block that should be changed to "allow".

  My "all-in-one" now does everything it is supposed to do

• VPN site-to-site between router 831 &amp; windows 2000

  We have a Cisco router 831 in a site and windows 2000 Server as a router to another site. Can we set up a vpn site-to site between these two sites? If so, how? Or point me to the link.

  This should get you:

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00800b12b5.shtml