setting up a wireless network
I wana share my wid of connection and the files internet my frendz in my community, we are all distributed in a box around 300metres.we live in different houses and between our houses, there are many buildings. This is our situation and I wana set up a wireless network between the routers and antennas us.so wat kind if I need to... .plzzz help
To use a router... you must have the Internet Service in your home from any Internet service provider... If you have Sevice, then you can use any broadband router from Linksys WRT54G, WRT54GS, WRT54G2, WRT160N, WRT120N, WRT330N... to the configuration of the wireless network.
Tags: Linksys Routers
How to set up a wireless network with 2 iMacs?
Need more information. Writing an effective communities of Apple Support question.
I have laptop EA60-155 A60.
I have trouble to set up a wireless network between my desktop and my laptop.
My office works well online via a network of 576 Thompson router. I use a BT Voyager 1060 portable card in my laptop, but the two will not connect. Can anyone help?
as a first step, he must set up a connection between the laptop and the router. Now, the two computers are in the same network. They can see each other in Solution Explorer if they are in the same workgroup. You can change the Working Group in the Control Panel, System.
Hi there tried to hook my laptop up to wireless as ethernet cable keeps me tripping. I am complete technophobe and propably have the only laptop that gets used especially to open the door.Have tried everything I can think even threaten her with glass of water after trying to connect to the wireless network, that it is said that there is something that doesn't work not with the driver if it means something to you. I have a toshiba, if it helps.Thank youoriginal title: I hope someone can help technophobe
It is said that there is something not working only not with the driver
You probably need to install some network drivers for your wireless card.
Visit the manufacturer's Web site and select your computer model (this is usually done in the Support section). You should be able to download drivers for your model. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions. You can also try to use Windows Update to get drivers - it is located in the start menu.
Update of the hardware driver that is not working properly:
Establishment of a network domestic:
For more information network:
Start here to set up a home network in Windows 7:
What do I need to connect to Internet:
Adding a wireless computer
Set up a wireless network:
If your network is wireless, run the wizard to Set Up a network on the computer attached to the router.
1. open Set Up a network by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center click on set up a new connection or a network and then click on set up a new network.
2. the wizard will guide you in the process of adding other computers and devices to the network. For more information, see:
Manually add a wireless computer
1. sign the computer.
2 open the connect to a network by clicking the network icon in the notification area.
3. choose the network wireless from the list that appears and then click on connect.
4. type the network security key or password if you are prompted to do so, and then click OK.
-You will see a confirmation message when you are connected to the network.
5. to confirm that you have added to the computer, follow these steps:
-Open network by clicking the Start button, then Control Panel. In the search box, type network, and then, under center network and sharing, click on view network computers and devices.
I ave a labtop new, bought used in Mexico, during the CCA creation, it is a toshiba 2011, says he has a card inside, I got connected to the House through the wirelessin from home, but have not yet connect to home any ideas thanksHelloYou can follow the links that may help you solve your problem below:In the Windows wireless network connection problemsSet up a wireless network
Help, please. Please can someone tell me how to configure my satellite P20 to exploit in the wireless. I've got 2pcs as an icon in the bar indicating connection 1394 tasks. Speed 400.0Mpbs
connected state. What is that.? I think I did this through the Connection Wizard, but didn't know what I was doing or how. PS. I'm not on broadband.
As Miro Wireless and IEEE 1394 (firewire) are two completely different things. If you want to learn more on this subject see please this link http://searchnetworking.techtarget.com/gDefinition/0, 294236, sid7_gci748584, 00.html. FireWire is mainly used for the transfer of data from external devices such as camcorder, external HARD disk or external devices, CD or DVD, because the data transfer speed is fast enough.
Can you please tell me exactly is it your device wireless card? You can check in the Device Manager. If so use to the first switch wireless on the left side of your laptop. If the wireless card is enabled and wireless light is on use the key combination FN + F8 to check if the card is correctly activated. After that, you must configure a wireless connection using the wireless network connection properties.
I lost my wireless connection and have had to put up again. Now I have my 6600 Officejet wireless printer successfully implemented with my router and also my computer running Windows XP. To allow printing I configured a USB connection. When I run the software from the USB mode to the wireless network that it starts very well mobile file across but the bar then gets the opportunity of almost 3/4 and everything stops and after awhile, he says that he didn't. The only thing that seems a little strange to me is that, on the Page of Configuration of HP network, it shows the wireless Direct as having a different SSID this could be the problem?
Wow, excellent. Thanks for the update.
When you configure a wireless network without router, how many computers can I connet to this network? Is there a limit?
Wow, I'm sorry. I must have had a brain freeze when I read your post. * From http://www.tomshardware.com/forum/20446-43-wireless-networking-general
What is the maximum number of wireless clients that can be networked using the Ad-Hoc mode, i.e. without an access point?
The theoretical limit, which is the same as in Ethernet, is determined by the 48-bit MAC address field in each frame of wireless data. The practical limit is determined by the constraints that can be integrated to client drivers. As a general rule, Ad-Hoc networks with 16 to 32 stations should be possible.
See you soon
I have a hp psc 1410, a desk, a laptop and a modem router combo and I'm trying to do it to where I can print to the wireless laptop, I read stuff online but can't seem to make it work. Help, please
Oh, a USB to Ethernet Converter is not likely to work. If so, your router or your ISP should tell you how to do this job.
I just set up my network with password wireless connection and configure my router on the IP 192.168.1.2. , but to be
honest im not sure person cannot access my network and record everything I have on my computr.is is it safe? Please tell me know if you
If you have the security key settings of the wireless network that turns on encryption. With encryption, people cannot connect to your network without the security key. In addition, any information that is sent on your network is encrypted so that only computers that have the key to decrypt the information can read it. This can help prevent attempts to access your network and your files without your permission. Common wireless network encryption methods are Wi Fi Protected Access (WPA) and WPA2.
Safety is always important; with a wireless network, it is still more important, because your network's signal could go beyond the boundaries of your home. If you don't secure your network, people with computers nearby may be able to access the information stored on computers on your network and use your Internet connection to get on the web.
Setting up a wireless network
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
I have a HP SmartTouch 600-1050.
I am connected to the internet via cable modem BrightHouse.
I recently acquired a Nook HD + and would like to know how to set up a wireless network.
I have a Linksys Wireless N300 router.
YES, the installation program should look like;
If the cable modem, wireless router and computers are in the same room:
Coaxial cable > Cable Modem > cable > E900 Wireless Router > cable > computer + CORNER HD + on 802.11 a/b/g/n WiFI
If the cable modem, router wireless are in the same room and the computer is in another room:
Coaxial cable > Cable Modem > cable > router wireless E900 + computer and NOOK HD + 802.11 a/b/g/n WiFI
Please send Bravo
I have a laptop Toshiba Satellite A85-S1072. I am trying to set up my wireless network, but I can't turn on my radio in my Atheros AR5005G Wireless Network card. My wireless router is configured OK.
I checked in the Device Manager tab and the Atheros wireless card is listed. However, pressing Fn + F8 does not work. Even the enable Radio option is not enabled in Atheros Client Utility.
I use Windows XP with Service Pack 2 and I disabled the "use Windows to configure your wireless network' option too.
Running the Atheros Client Utility shows me a message saying 'Turn on ACU Radio'
Of course, any help is welcome.
Thanks in advance
Is your unit preloaded with recovery media or you use your own installation of the OS. I ask this question because if you want to use the key combination FN + F8 a Toshiba designed the tool must be installed. I put t really know how he calls, but please do not forget that you have preinstalled all designed Toshiba stuff. Everything you need you can find on the Toshiba U.S. support page.
Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?
hardware devicemy wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(
What operating system installed on the computer?
Note: Look for errors in the network card device manager.
Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.
Using the troubleshooter from network in Windows 7
He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.
For more information, follow the below mentioned article:
Set up a wireless router:
Follow the below mentioned articles and see if they help you:
Set up a wireless network:
Wi - Fi and in Windows network connection issues:
Wireless network card: frequently asked questions:
There is NO connection of Belkin Wireless adapter flashes to pick up the signal.
Whenever there is no link, I need click Belkins utility in the system tray at the bottom to obtain, however, it keeps not connected and takes only 10-20 minutes.
Moreover, I found when I clicked, Belkin icon > properties > network and found there is no "use Windows to configure my wireless network.
How do I fix this problem?
Thank you for your help in advance.
I suggest to follow the steps in the below links and let them know the State of the question.
Wireless and wired network problems:
To set up automatic wireless network configuration:
For more information:
Follow the steps in the link to configure the adapter Belkin Wireless below:
If the problem persists, then I suggest you to contact the Belkin Support:
I hope that the information above helps you.
Hi I'm trying to set up a wireless network small office at home. I created a profile on the other two machines with XP pro. I have a cable router and all can connect through it when I try to create a network home with logins that he seems to think that I want to connect to a different router in a different place, while I use my router to create network wireless home office. I'm better off the coast of uninstallation of access connecitons. It seems that he manages this difficult work or can someone point me in the right direction. I loooked at Lenovo's article on it, but their images of their way to access connections is different from my dial-up connection. I have updated and update regulaily with system update. Advice and prayers... Please... Don't tak the last comment as confirmation that I believe in God or and beyond...
I would recommend just UN-installing of logins. You can switch between networks without thread too easily (IMHO) with the standard tools of Windows networking.
See you soon,.
Maybe you are looking for
I've been sent images attached with which I'm doing a record. When I click 'save all' appears a message saying that the image already exists in the file, which is simply not true.
Equipped with 64-bit Vista on Toshiba Satellite M305-S4848KB Can download updates but cannot install the Received error codes above for the updates listed above Clicked on "Get help with this error", but no error is listed among the choices Recommend
error cood1163 cannot read dvd, says problem with copy protection with video from the dvd player and decoder card. recent problem was working before
"Are you sure you want to copy this file without its properties?" what adaptation .jpg files to thumbdrive.