Setting up RAID 1 on new want 700

Similar Questions

• 5660 envy all-in-one: computer screen is disabled when you set up the connection Wireless new want 5660 on iPad.

  No error message or facilities.

  I started with setup assistant device and the iPad first wireless configuration. The installation program appears to proceed normally but then computer monitor went black. Cannot access the computer somehow. Finally, unplugged the computer, restarted and began again using the Setup Wizard first configuration wireless PC. PC installation is completed without incident and I have been able to operate printer iPad and computer. Still some features not fully understood, but maybe enlightenment will come. Thank you for your interest in my problem; Keep up the good work.

• How to set preferences so that open new tabs to the same page that activates when the command-T has been affected?

  By opening a new tab, the default tab opens to thumbnails based on recent history. The Safari, I want the new tab to open * to the same page, as was active when command-T was hit *. What are the specific actions, to set the default value (preference), new pages to open 'same page '? ('Same page' is check in Safari preferences box).

  Note, I've sailed available Support of Mozilla and using about: config have reset browser.newtab.url so that the new tab appears empty (stop followed recent history for this purpose).

  Note, most importantly, I found this article of Support Forum, which, although written challenge, gave me a temporary solution:

    * https://support.mozilla.org/en-US/questions/891635
  

  (The temporary solution for the Mac OS is to command-click the icon 'Reload current page' in the url/address box in the browser toolbar, which opens a new tab in the same window).

  However, I would like to define this as a preference permanent and would ask someone give me a solution. Cheers, teacher

  LeProf_7272 wrote:

  if I can possibly just create a new config line
  

  You can't, that's why I suggested the modules above. There is no option in the user interface or preferably hidden in Firefox that can duplicate a tab whenever you open a new tab browser.newtab.url can only be set to a fixed address, what address is to be opened in the current tab.

  Are the only two built-in methods to duplicate a tab:

  1. Hold down the Option key and drag the tab to a new position on the tab bar.
  2. Hold down the command key and click the reload of the address bar.
  • Use mouse shortcuts to perform common tasks in Firefox

  You can make feature requests by filing development bug reports or by opening the Help menu by clicking on your comments.

  • https://developer.Mozilla.org/docs/Mozilla/QA/Bug_writing_guidelines
  • https://input.Mozilla.org

• After setting up voicemail on 5 new successfully it has stopped working.  I now get mssg. "setting up voicemail" when I press its icon.  Nor can I change password through settings.  Any ideas?

  After setting up voicemail on 5 new successfully, he stopped after only 1 day.  I now have the message "set up voicemail" when I press the icon of the virtual machine.  Nor, if I can change the password via the parameters, any ideas?

  dukie1 wrote:

  After setting up voicemail on 5 new successfully, he stopped after only 1 day.  I now have the message "set up voicemail" when I press the icon of the virtual machine.  Nor, if I can change the password via the parameters, any ideas?

  You want to communicate with your carrier. Your means of troubleshooting access to your voicemail only unit is extremely limited because it is a managed function of carrier.

  You can try to reboot your iPhone or resetting network settings through settings > general > reset, but I doubt he will bare much fruit. It is more than likely that's going to be a conversation with the carrier that suits him.

• Should I set up my iphone as new on itunes or restore information from my old iphone?

  Hello

  I got the iphone 4 that have been saved in my itunes on my PC.

  I tunes has songs inside.

  Now I have a new iphone - iphone 6 for a few months now, and I have pictures, contacts, messages, etc. in it.

  I want to download music on my phone - so I plugged into my PC.

  ITunes asked me if I want to set it up as a new iphone or restore all information since the last backup that was made (the backup was made with my old iphone)

  If I chose the backup - I'm afraid it will delete everything on my iphone and will download only the information from my old iphone (I have new contacts. photos etc..).

  and if I put in place like new - I'm afraid it will delete everything on my phone or remove my itunes (including all the songs I want)

  What should I do?

  Thank you!

  If you "set up as new" this does not erase the content currently on the iPhone. It's more a set upward for iTunes can communicate with your iPhone. It is really "set up" a return for your iPhone and iTunes connect with your phone.

  In this way, you can add music and everything you want on your iPhone. You will not lose anything in iTunes.

  You can always open iPhoto/Photos and transfer your photos first if you are concerned, or enable iCloud create a backup.

• Rookie needs help setting up RAID-1

  Location:

  Hardware: HP A6528P (refurbished / new) with onboard RAID 0 and RAID 1 support for controllers. 6 GB DDR2.

  two (2) WD Caviar Black 750 GB HARD drive each (new) plugged into SATA port 0 and port SATA 1

  Software: RAID enabled in the BIOS.

  You press F4, then ctrl + I during the boot, set up RAID-1 (mirror) and restarted

  Restart to CDROM and installed clean Windows 7 Home first (64-bit)

  Question: Open the computer management / disk management and can see the 'simple' drive 0, but the fault tolerance said 'no '!

  Also, right-click on the 'unique' drive, the option ot 'Develop Drive' is grayed out. So I'm not ablr 'fill' set up as

  According to the instructions found on the internet.

  How do you know (I know) if I run a RAID or not? I really lost at this time - it's my first rodeo, so to speak.

  Any help is appreciated. I am a student in networks and hope to eventually replace Win7 with Windows Server 2008.

  Hello

  F5Loar wrote:

  Wow, that's a nice piece of software; I love almot as Linksys Network Magic. Thank you very MUCH for your advice!

  In any case, after the installation of the program from Intel, it shows a RAID array (Volume 0, I think), but still of Disk Management integrated Microsoft shows 'No' in the column of fault tolerance. It seems odd. Maybe another reboot would be useful.

  So bottom line is I feel better, but the contradictory information leaves me skeptical? !! #?

  Yet once again, I appreciate your response.

  Bob

  To use the Storage Manager, you must create the RAID 1 array after you select the two disks in the Storage Manager Assistant tool. You have already done that. Is there a user manual available for the version that you downloaded on the Intel site. Choose the size of block (typically 32 or 64 kb) and create the table.

  Kind regards

  ERICO

• Cannot set the URL to the new tab from windows 10 update?

  With windows 7 I had edited the subject: config so that when open a new tab it always open a page of google. Since I updated to windows 10 it now only shows top sites, even if the subject: the configuration file shows that he has set to open google. I even reset it and re-entered the url, but it did not work. Does anybody know a solution for this?

  In Firefox pref browser.newtab.url 41 disappeared. This pref was taken hostage by malware too frequently for Mozilla decided to remove this pref to eliminate this kind of diversion.
  You will need an extension like this one to restore.
  https://addons.Mozilla.org/en-us/Firefox/addon/new-tab-override/

  Or to have your home page as the new tab page, try this extension.
  https://addons.Mozilla.org/en-us/Firefox/addon/new-tab-homepage/

  If you're using Classic theme restaurant, go to the options of CTR > general UI (2) and set your preference for the new tab URL there.

• Why isn't my old watch backup appear in the list when you set up the replacement or new shows?

  Why isn't my old watch backup appear in the list when you set up the replacement or new shows?

  I've been upgraded to a new watch, and during the installation of my phone would not offer a restore of backup.  The problem is that the factory OS on the new watch was 2.0.1 while backup of my old watch watch OS 2.1.

  I had to implement the new shows like new, then update the OS 2.1, désapparier it and pair it again.  It gave me the option to restore the backup of the original watch origin.

  [Must be like the iPhone backups, you cannot restore a backup of a newer operating system that the phone is running.]

  Hello

  Yes it is true backup must be the same ios

  See you soon

  Brian

• Cannot install old set of 16 bits on new 64-Bit Windows 7. Tried to solving problems of compatibility without success. It ran OK on Vista, XP... all the way back to Windows 3.1.

  Cannot install old set of 16 bits on new 64-Bit Windows 7. Tried to solving problems of compatibility without success. It ran OK on Vista, XP... all the way back to Windows 3.1.   Any ideas?  It is my wife's favorite.

  Hello giant,

  It is not possible to use 16-bit on a 64-bit computer applications/games.

  However, you can download and install Wondows XP Mode for windows 7. Later, you can install your 16-bit application in XP mode.

  You can download the application from the link given:
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  After back and let us know if it helped to solve your problem.
   
  Thank you and best regards,
  R uma - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• All the slides in my project are set to 3 seconds. I want to show them for 5 seconds and want to do t

  All the slides in my project are set to 3 seconds. I want to show them for 5 seconds and want to make this change to ALL slides, not one by one. Any idea? Thank you

  Would have been easier if you did it before you create the slides (preferences, default values).

  For existing slides:

  • Activate the film
  • Use CTRL + A to select all slides
  • In the properties panel for 5 seconds change time

  Lilybiri

• ENVY 700-515xt: RAID 1 support WANT 700-515xt Office

  Envy my new 700-515xt (product # K7X03AV), MSI Kaili2 motherboard, Chipset Intel Z97/Z87, operating system Windows 7 RAID 1 support and if so what should I do to set it up.

  Hello

  1. This publication articlewill give you some information note in order to read at least twice.
  2. Make a complete disk image system hard by as a precaution.
  3. All data on the target drive will be more written to return it to the top before you continue.
  4. Install theIntel RAID rapid storage technology driver (TSRI).
  5. Go into MSCONFIG and set the boot in safe mode and save the changes.
  6. Turn off and restart your PC in BIOS menu (key to tap the ESC after plugging).
  7. Select F10 for BIOS configuration and then go to storage--> Storage Options Menu and change the emulation of SATA RAID.  Save the changes and start safe mode.
  8. If OK at this stage then return to MSCONFIG---> Boot and uncheck safe startup, save changes and restart.
  9. If OK at this stage then your PC is ready to configure RAID.
  10. Go to control panel, and then select TSRI.
  11. Go to the help screens and examine how to set up a RAID 1 volume.

• New want: set group policy not available in this edition of Windows 8?

  Just before I used my recovery on Envy 6 partition I bought less than a month ago, I tried to define group policy in order to take control of my administrator account. I received an error message: "group policy is not a feature of this edition of Windows 8.1."

  I knew My Envy 6 security problems (in my opinion, nothing to envy about it...) since I got it.

  I have known this same problem several times, with different computers, then perhaps it is not just HP.  However, I spent the time shared an office with two of its engineers, who blew me subject my security concerns.

  What happens first, did someone other than I turn my computer and started using my machine as a distributed resource.  When I look at the resource monitor, the memory usage remains at a stable level around 30%; the window of the disk (Disk 0, I presume) remains at about 100%, for several minutes after I started working.  There is evidence that copies of the countless applications are pushed through this channel to an unknown person to me.

  In other words, it's like I had to work in a large company where administrators are able to share my computers memory and storage (and also, copies of programs on my machine) with others.

  Yesterday, I took my machine at Best Buy Geek Squad for the third time since I bought it less than a month ago.  For the first time, they have me seriously on this security issue.  Yesterday, the fourth time I used my security partition, (once I had looked into the Task Manager and saw more than 50 tasks scheduled to run when the machine has been slowed and on current alternative) I decided to see what would happen if I leave the fully charged battery to work.

  What I saw, it was a machine to panic.  I saw a sequence of four first screenshots, then a flash of a task list, and then a series that looked like screen shots again - this time fourteen of them.  I watched it happen to three different times.  Then, the machine made me a 'Capital A administrator' password, which I didn't.

  I looked around resources here and on Windows and discovered that I could access boot options by turning on the machine and pressing the ESC key.  I ran through the list of options there and finally chose EFI, where I finally has two ways to start at an unknown address.  So that's another trick of Geek Squad was in order (I bought their contact service when I bought the machine, what the devil).  This time there was pretty much irrefutable evidence that something was wrong at the level of Internet security.

  I realized that it is way to much information.  I'll ask just once more the question: is it possible that my brand new machine doesn't really have a 8.1 Windows edition that does not include the ability to group policy management?

  Thanks to all who responded here.

  Hi @ElizaDoolittle8

  Thank you for your request, I am happy to help you!

  I understand that you have some security issues. You have taken your computer to the Best Buy Geek squad, 3 times and have used the 4 times recovery partition.

  Only Windows 8 Ultimate and professional have the Group Policy Manager.

  I suggest you do a full restore in the factory.  This will remove all the threats that may be installed.

  If you don't have virus protection, I would say that you install one because it would help.

  Performing a recovery of HP (Windows 8) system

  During the recovery process, you will have an option to backup your personal files to avoid loss.  If you do not have a recent backup I suggest you only do one now.

  Restore files that have been supported to the top using HP Recovery Manager (Windows 8)

  Here is a link to a YouTube video.  Desktop version of Windows 8 open the Group Policy Management Console

  Here is a third-party link to How to activate 'Group Policy Editor' (gpedit.msc) in Windows 7 Home Premium, Home Basic and Starter Editions? who, according to some readers have worked for them.  You can try it, but I don't know if it works or

  not. (of A? KVG)

  I hope this helps.

• Setting up RAID on pair of internal IDE drives in a Dimension 2400

  I will first say that I do not know if this is possible.

  I have an old 2400 dimension which came with one hard disk of 40 GB. I want to buy a pair of larger disks to put in it and wonder if it's possible for me to create the pair with RAID-1 mirror, even if it would have the top OS? Ultimately, I want to set up multiple partitions and set it to dual-boot Windows and Linux flavor still to be decided.  I don't know yet what readers are compatible with this machine. I am hunting for the specifications for it. I will need to create a recovery media to preserve the Windows XP operating system, the machine was not provided with media.

  Someone on this forum has successfully completed what I'm doing? If you have any suggestions or can tell me all the good links online, it would be more helpful as I am still learning what I need to do to make this happen all. A link to the material sheet Dimension 2400 or compatible drives list would be welcome.

  Feel free to me blowing my lack of knowledge on this, but we must start somewhere and ask questions to find out what they don't know.

  Thanks in advance,

  The BIOS and the IDE controller integrated into the Dimension 2400 will not support RAID.  However, you can add a RAID PCI controller card that accepts SATA drives.  The SYBA-150R comes to mind for example, but a search of RAID PCI controller will be to others.

  The Dimension 2400 is a bit old for this sort of thing, unless you use it as a learning tool.  You might be better off looking for a somewhat newer machine, like a Dimension 9100, already a capable SATA controller for RAID.

  The incorporation of other operating systems is not a problem, provided that the selected OS has a compatible with the RAID controller mass storage driver.  When a RAID volume is established, the operating system simply treats it as if it were a single hard drive; individual readers are invisible.

  For more information on the Dimension 2400, see the following: Dimension 2400 manual repair

• Type of sound card want 700 060ea

  I'm looking at the specs of 060ea HP Envy 700 and cannot see the "sound card". I compose music for a living online and this info is required to properly set up my new software EWQLSO (money).

  I'm not particularly happy with the card its installed with this model - it's a trumpet sounds like an Irish flute with a leak and a clarinet sound like a demi-etrangle pigeon - I know that the software I mentioned above will solve this problem, but it's still a bit disappointing.

  Hi stephenlines,

  The IDT audio installed on HP systems is not compatible ASIO. Beats Audio isn't a good solution in real time recording.

  Not sure if that's where you were going with your question, but I work with musicians and could not use its IDT for this purpose. I now use the ASIO for all to eliminate latency when adding instruments to the records. Bat has terrible latency characteristics.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo" If the notice is relevant or "Accept as Solution" If your problem has been resolved.

  +++++++++++++++++++++++++++++++++++++++++++++++++++++
  H8 1380 t CTO, Intel i7 3820
  16 GB OF DDR3 MEMORY
  Pegatron Motherboard-IPIWB-PB (Pittsburgh), Radeon HD 7570 1 GB. Win 7 Home Premium set to upgrade to Windows Pro 8.1.

  Want Phoenix 810-150se, Intel i7 4820 k
  12 GB OF DDR3 MEMORY
  Pittsburgh2 motherboard, NVIDIA GTX 645 - 2 GB GDDR5. Win Pro 8.1.

  HP 560z CTO AMD Phenom II X 6 1090 t.
  16 GB OF DDR3 MEMORY.
  Radeon HD 6570
  Win 7 Home Premium set to upgrade to Windows 7 Pro.

  HP ENVY 17 t-j000 CTO Quad Edition laptop. I7 4702mq
  12 GB OF DDR3 MEMORY
  NVIDIA graphics
  Win 8 Pro

• New want for new Mac Apple ID

  I'll try to make it simple.

  I currently own a MacBook Pro bought in late 2011. I have an Apple I used with this one ID and my current iPhone.

  Today, I bought a MacBook Air, brand new. The main reason I bought a new Mac is having a totally fresh workspace without all the clutter that is located on the old Mac. When I created my new Mac I used my Apple ID, and it was a mistake. I'm not very tech savvy and I just didn't know that he would have ALL SYNC. So now all the echoes of my old MacBook Pro are on my new MacBook Air (at least the part of Safari and it migrates about 162 pictures of my old cloud on my new Mac).

  It is the OPPOSITE of what I want.

  So what I want to know is: How can I wipe my old Apple ID of this new Mac and just start over with a new Apple ID just for the new Mac?

  I want to KEEP my old Apple ID for my old Mac, iTunes and my iPhone.

  I understand that by using a new Apple ID with my new Mac than all my Apple products will not be synchronized. I understand that I won't be able to access my iTunes on my new Mac. I'm fine with all that. I want just this new Mac to be totally free for me to start working brand new to this topic. I don't care about the new Mac iTunes, and I can continue to use my iPhone with my old Mac.

  Please, I hope someone can help me with this. THANK YOU in advance.

  Create an Apple ID iTunes. On the new computer, open Control Panel preferences to iCloud. Disconnect. Sign back in, but this time use the new Apple ID and password. See Apple ID - Apple Support and iTunes - how to set up an Apple ID iTunes.