Setup after a system restore error - can not re - install CC - 1 error code.  Windows 7

Similar Questions

• I can't access the 0x8004230F system restore error code

  My computer started to really slow down while I was getting ready to go to the system restore to go to an earlier date when it worked fine, but I get an error code

  0x8004230F. it doesn't let me create a restore point, or access previous restore points. Thanks for any help I could get on it.
  Laptop Toshiba running Vista 32

  Hello

  Malware will interfere with restoration of the system to try to remove yourself from this way

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/products/malwarebytes_free

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _________________________________________________________________

  other reasons for problems with system restore;

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Install the software and registry keys for the windows installer I screwed up after a system restore, what can I do?

  After you install an update, which forced me to restart my laptop, I had to do a restore point, because it stops while windows is loading files of the update, which led me to a restoration of the system, which has messed up a large number of windows registry keys install leaving me unable to open the following software:

  • Skype
  • Avira (but not the antivirus) Launcher
  • Java

  I can not install or uninstall these programs, either because I need to an .msi file that does not match the latest version of these programs, the program does not appear in the uninstall Manager or just installer does not at all, so what can I do to correct these programs and be able to install their return

  The just Java installer does not appear when I double click on the .exe, no matter if it is the x 64 or 32 bits, and I can't uninstall it because it does not appear in the uninstall Manager.

  Avira Launcher Installer, ask me for a .msi to remove the last version, but I can't, if the installation fails, also the program does not appear in the uninstall Manager.

  The Skype installer just cannot be updated, and I uninstalled it with a 3rd party uninstaller, but now it's just throw a critical failure when starting to install

  My main question is, how can I solve these installers, should I format this laptop and do a clean install of windows?

  Hello

  Please contact Microsoft Community.

  After the description of the problem, I understand that you are not able to install programs after system restore.

  In this case first I'd say allowing you to run the cities in trouble it automatically repair the issues that block the installation program or delete because of corrupted registry keys.

  https://support.Microsoft.com/en-us/mats/program_install_and_uninstall?WA=wsignin1.0

  After that it fixes if you have any third party anti virus try to disable it from your computer and then try to install these programs.

  WARNING:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Try these steps and ley, we know the results.

  I hope this helps.

  Kind regards

  Anusha

• Cannot use System Restore - error code 0x80070005

  I can't restore my computer to an earlier date as it comes back with the error code 0 x 80070005 suggesting that I disable the virus protection that I've done and tried again, same message appeared, I uninstalled the antivirus completely and always got the same message, I downloaded then the scanner from Microsoft which showed no problems with all the files even with a total sweep someone out there can offer advice please

  Moved from feedback

  Original title: error code 0x80070005

  Hello

  Thank you very much for your response, I am using windows 7.

  I managed to solve the problem by choosing a much earlier restore point, which suggests the problem was caused by a Microsoft Update.

  Kind regards

• Update of the system: KB2890084 (64) can not be installed

  Hello, I am not able to install the following update on my ThinkPad E540, nor by using Lenovo System Update or installation manual: KB2890084 (64). However whenever I start the system update (that I keep up to date) I find this in the section "recommended."

  The only solution to get rid of this strage behavior seems to hide in the update system. Can anyone confirm that this update is obsolete, so I can hide it safely in the update system? What it is?

  Please help me, because I don't know what to do. I thank very you much in advance!

  Best regards, Alex

  P.S. I use Windows Core 8.1 (64-bit)

  This KB has been included in recent "Update 1" Microsoft for Windows 8.1

  So more the KB does not apply.

  We will remove the KB of system update.  Sorry for this disorder.

• All Documents and the missing photos after a system restore, what happened, and how can I recover my files?

  Hello
  All of my documents and photos are missing after a system restore. Here's the story. A virus called "Windows Recovery" popped up earlier and I did a system restore to get rid of him. To restart the computer, all my files and photos were missing. I used the system restore in the past in similar situations and have never had any problems. I opened MS Office, and I found some documents in the recent documents list. They open up fine and I saved them, but is only some of the documents. I can find the files in my documents when I do a search on them, but they are empty, when I open them. I also find some pictures and documents when I do a search for them by name, but I remember only a few file names, so I can't retrieve many files this way.

  Can someone help me out here? Thank you

  Hello

  read the information at the bottom of the below link about what makes this malware hide your data files and the cure for it regarding

  Read article 17

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

  also follow the correct for that malware removal steps, just to be safe, let's

• Ststem restore error code 0 x 490 and the verification of the integrity of file Sys...

  don't really know where to post:

  Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you log out.
  System Restore error code 0 x 490 and Sys files integrity check...

  .. .and now after trying to make the (that failed) repair and restoration * who failed 3 times) and the "clean boot" of http://support.microsoft.com/kb/929135 here my laptop charge a temporary office that does not record my personal settings. I uninstalled programs I thought that maybe the problem, but it always loads the Temp. desktop computer. I have no one.
  drive recovery for this Toshiba laptop but I do it to my another Tower, which is a Toshiba as well. I really want to do a restore if I can help it. I have too in my bookmarks/favorites to lose. I just want to know what the problem is and fix it.
  Any help would be appreciated. I don't really have the money to take it to a computer store.

  Concerning
  BT

  Hello

  See if this helps you:

  "Error of the user - logged on with a temporary profile profile".

  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  "A temporary profile is loaded after you connect to a Windows Vista-based system.

  http://support.Microsoft.com/kb/947242

  If you do not have to make a recovery here is the use of the Toshiba Recovery Partition.

  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/bulletinDetail.jsp?soID=2737864&PF=true

  See you soon.

• Windows calendar after the system restore notes no longer exist.

  The Windows calendar after the system restore notes disappeared forever, or can be found somewhere?

  Hello
  
  First we recommend that you search the .ics files confirm the windows calendar old files are present on the hard drive.
  Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Tips-for-finding-files
  Windows Vista has an option to cancel the system restore. To do this, follow these steps.
  1. open the system restore by clicking the Start button, all programs, accessories, clicking System Tools, and then click System Restore.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. click on undo system restore and then click Next.
  3. proceed to review your choices and then click Finish.
   
  Your computer will restart. When you are finished, you will see a confirmation that the cancellation is complete.
  
  For more information, see this link: http://windows.microsoft.com/en-US/windows-vista/Undo-System-Restore
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A refurb Lenovo/IBM PC windows 7.0 SW, software code does not work for charging SW after a system restore

  A refurb Lenovo/IBM PC windows 7.0 SW, software code does not work for charging SW after a system restore. How can I get a new one

  Skip, enter the product key, and then complete the installation.

  Try the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• System Restore error: "Restoration incomplete will not be restored" < date I'm going >.

  Original title:

  I can not get the system restore to run even in safe mode. When restarts windows, I get the message "incomplete restoration cannot be restored" date I'm going home. Can anyone help?

  Try to configure Windows XP to start in a "clean boot" State, and then try to perform the system restore.

  How to configure Windows XP to start in a "clean boot" State : http://support.microsoft.com/kb/310353

• I can not intall Lightroom 4 (I have the license) - he is blocked after a partial installation - error code 2203 (Win 10).  Can you help me please.

  I can not intall Lightroom 4 (I have the license) - he is blocked after a partial installation - error code 2203 (Win 10).  Can you help me please.

  Hi BobPryce,

  Please see: 2203 error when installing the Adobe Creative Suite 4 products, 5 or 5.5 or updates

  Kind regards

  Mohit

• After the system restore, clock is located one hour before because of DST

  Because of a logon error, I had to perform a system restore.  After the system restore has completed, I noticed that my clock is set ahead one hour (DST).  I think that TimeZones eventually applied twice to the clock.  I can put back an hour, but I rather it would be correct.  I tried to re - download the patch for the DST, but that did not help.

  Have you tried to reset the clock -

  "With the time server Sychronising Internet?

  Have you checked your area etc

  TaurArian [MVP] 2005-2010 - Update Services

• After running System Restore my computer asks for a password when connecting and I don't remember the password.

  I am running Vista Home Premium on a laptop Toshiba Satellite L305.  I ran the system restore due to a problem of "Internet Explorer cannot display the website" (by Microsoft troubleshooting guide for this problem) and selected restore point earlier.  Now the computer asks for a password that I don't remember.  I tried all the possible passwords I can think.   There is only a single user account on this computer.  The administrator account should be disabled, it is not an option when connecting safe mode.  I don't have a system repair disc set.   Is it possible to run the system back restore to select a more recent restore point which does not require a password?  Or y at - it another way to connect to the computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/undo-system-restore

  If you tried to use the system restore to solve a problem, but the problem remained or other problems were introduced, you can undo the restore operation. After you cancel the system restore, you can try using a different restore point.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Mick Murphy - Microsoft partner

• 0 system restore error 80070005 x

  After that I downloaded a Windows critical update, change the icons in my taskbar, so I tried to do a system restore.  Now, I can not complete the restore of the system's message: impossible to extract the file (C:$ Extend\$ RmMetadata\$ Txf) the restore point.  An unexplained error occurred system restores (0x80070005).   I had this happen before around the first of the year.  How can I fix it?

  Ruth

  After that I downloaded a Windows critical update, change the icons in my taskbar, so I tried to do a system restore.  Now, I can not complete the restore of the system's message: impossible to extract the file (C:$ Extend\$ RmMetadata\$ Txf) the restore point.  An unexplained error occurred system restores (0x80070005).   I had this happen before around the first of the year.  How can I fix it?

  Ruth

  already answered

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/system-restore-error-0x80070005/728b2420-739b-4C9B-8f50-99d0b66d9b19

  http://www.SevenForums.com/backup-restore/48067-system-restore-error-0x80070005.html

• Reactivation after a system restore

  After having accidentally deleted some files, I finished a system restore on my work computer. When I restarted the computer and tried to get into Photoshop CS, I was told 'the configuration of your computer seems to have changed since the time that this product has been activated. To continue using this product, please click OK to activate it again to your new system setup, or click Cancel to exit. »

  After clicking OK, I was given the option on the pop-up Activation Adobe to reagent on the Internet (which did not work because the 'activation system is not available at this time.") Then I tried by phone via the activation of automated software system. This gave me a phone number, my serial number, Activation # and Type of Activation and a place to enter the authorization Code provided by Adobe (not YET RECEIVED).

  I called, entered all information requested several times and each time they refused my activation and tried to connect with a Customer Service representative. At that time, a record came the saying that is no longer, they help with the problems of activation by telephone and sent me to a section of the Web site that is not useful either. (www.adobe.com/go/activation). This referred me to the "still need help? Contact us: ("link to the Chat service.

  I used the Chat service for "Devika" questions on this issue and received no help. They told me if I would like a phone number for technical issues, I have to pay if they solved my problem. Otherwise, she directed me to search the forums.

  With the HELP of MY serial NUMBER and activation NUMBER, HOW can I REACTIVATE PHOTOSHOP AFTER a SYSTEM RESTORE?

  You cannot reactivate cs ps.

  However, adobe allows you to use ps cs2, l http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm