"Setup cannot find not all hard disks" on Dell PERC 6/1 RAID controller-supported?

Similar Questions

• Finding not all DVD disks

  Aspire E380 - CB7l OP XP Pro installed auto OP has Vista

  After a reinstall the dvd find discs all disks have been cleaned and polished and have no scratches. I looked for a solution on the net but nothing positive coming on

  My computer is showing the DVD - RW drive (D :)

  DVD - Rom drive: LITE-ON DVDRW SHW-160P6S

  After doing much research on this, it seems that there is no software for this solution, it seems to be a problem with the DVD unit.

  The solution is to replace it.

• New Windows 7 booted from the recovery disk appears not all hard disks?

  So basically, I used my recovery disk. re installed windows very well. But my second hard drive is not displayed. Also, I think that one of the drives are slower, then the other. So which driver should I use as primary and who should I use for backup? Here it shows that 2 drives are not recognized. Ask any more questions if necessary.

  Thanks for the help.

  

  You have one disk (disk 0) with three primary partitions. The 1st is the partition that Windows installed on it. The second partition seems to be empty (open Windows Explorer to check for this, do not forget to set options for the Explorer to view the hidden files and folders) and the third is the "system" Partition which should not be assigned a drive letter.

  Not sure why your recovery disk created as 186GB 2nd partition but if its empty that could be deleted and the Windows partition extended in "Unallocated" space formerly occupied by the second partition.

  Note: I would call the manufacturer of your PC support team to find out the answer as to why you have this second partition (that you have assigned the drive letter E: to) before doing anything to this partition.

  J W Stuart: http://www.pagestart.com

• XP cannot find the drive hard installing macbook

  Install XP from ISO image, that I burned to a DVD.

  Fusion installed before okay.

  XP then says «Setup did not all hard disks...» "can not continue then starts to do things.

  I did google and install messages found of it during the nonmac - something about lack of drivers scsi... but everyone has got a solution for Mac?

  Cheers from Aus!

  Dave.

  This has nothing to do with the Mac or your installation of Fusion software. This has to do with the type of virtual disk that is set when the virtual machine is created.

  Merge (and other VMware products hosted) supported the virtual drive as SCSI (BusLogic of SCSI controller compatible) devices devices or IDE devices. What is probably happening (as noted by the previous posters), is that the virtual hard disk that is created is a SCSI hard drive. You can confirm this by opening the settings of the virtual machine, click drives, and note if it is IDE or SCSI disk to the virtual disk.

  Since the Windows XP installation diskettes is not the SCSI driver required in them by default, you must do one of the following:

  • Inject the SCSI driver provided by VMware in Windows Setup (as you would with any other device that does not have a driver on the XP installation disc). The driver provided by VMware is on a virtual disk "inserted" in the floppy drive virtual drive (see VMware Fusion help on how to access the virtual floppy drive floppy image). From there, the process is exactly like the addition of a driver in a physical machine.  As says rcardona2k, using the Easy Install option automates this task for you.

  or

  • Make sure that your virtual machine has a virtual IDE drive. You don't have to completely recreate your virtual machine - you can take your existing, open its settings, click on hard disks, remove the existing hard drive and add a new hard drive with an IDE bus type (and other options and desired size).

  For the record, the virtual SCSI hard drives perform a little better that the IDE, but you may or may not notice the difference.

• Hi, does anyone know how to get my sony vaio bluetooth works please, I tried to update etc, but he won't find not all bluetooth devices.

  Hi, does anyone know how to get my sony vaio bluetooth works please, I tried to update etc, but he won't find not all bluetooth devices.

  Hello

  Check with the support of Sony as their problems, driver updates, other reasons could known BlueTooth
  is not functional or taken in charge.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  =====================================

  If bluetooth is supported on your model that these could help.

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
  as expected when you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  ---------------------------------------------------------------------

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  ---------------------------------------------------------------------

  More information of possible interest to some:

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite L300 - Win XP Setup cannot find hard drive

  My Satellite came with vista installed. No disc Toshiba down grade to XP. When you try to run the installer, he comes back with the program Setup cannot find the hard drive connected to this computer, make sure power is connected etc. It doesn't matter if I delete the vista partition or not.

  I copied the XP cd to the hard drive, but here the Installer gives blocked application because the current version is newer than the version you want to install. (not verbatim) Vista and both are my precious new copy of XP Home SP3 OEM. If anyone can help... PLEASE, I BEG YOU!

  Thanks in advance
  Special characters

  Hello

  You really Don t know why it happens?
  You don t have a clue?

  In this case, use the forum search. You will find hundreds of discussions on this and it s not a bug, it s a feature. The magic word is Intel Storage Manager.

• blue screen (setup), saying: Setup cannot find the files temporary installation and press f3, it is that I get

  Original title: unerase my hard drive
  

  I had a work beautifully computer (Dell INSP 6000) until I decided to add Media Center to my Xp - sp3. I bought the drive from a seller on ebay with numbers of coa who did not work. The drive has been formatted by attempts of constant relocation. Using XP and Media Center disks, I can get as much blue screen (setup) saying that Setup cannot find the temporary installation files and press f3. It's that I get. I also have a blue screen telling me to insert the diskette labeled 'Windows Automated System Recovery disk' in on the floppy drive. That's all. I am doomed.

  E-mail address is removed from the privacy *.

  How to request backup discs Dell

• Try to install Windows XP but don't get a message: Setup cannot find a previous version of Windows installed on the computer.

  Install XP instead of Vista

  I tried to install XP in my laptop ASUS PRO31jr which currently has Vista Home Premium installed.  I updated the BIOS first and changed the boot on CD/DVD order.  Disk load bunch of drivers, then when it gets to the installation, said he cannot find a previous version of windows installed on the computer and calls for an XP Home edition (full version), or a CD of XP Professional (full version).  The CD I have is XP Professional Academic Edition version 2002.  RHE booklet supplied with the disc seems to indicate that this is the full version, and I successfully used to clean install on XP.  Is the drive of my problem?  I would appreciate a difinative answer if anybody out there knows for sure.  Goodwich.

  If the message "Setup cannot find a previous version of Windows installed on the computer", you have an upgrade version that requires Windows XP Home Edition installation.

• Windows cannot find not (Error Message)

  Windows cannot find not (Error Message)

   Links in Windows Mail = "File not found"... "in IE9

  
  I use Windows Vista Home Premium; Windows Mail; IE9. -Links browser does not work in Windows Mail - IE9 opens and is left blank with an Error Message in a small window saying:

  
  Title: http://click.scrippsnetworks.com/track?type...
  Body says: "Windows cannot find
  ... subscription/8080/subscribeUpdate? brand... »
  "Make sure you typed the name correctly and then try again."

  (details vary with each different link)

   

  If I have IE9 open before clicking on the link Windows Mail, everything works as it should.  This problem occurs only if IE9 is not displayed when the user clicks on the link Windows Mail.

  It worked before using clear CCcleaner on cookies and other temporary files, etc.  I think I must have messed up something in the registry.

  Hello

  Method 1: I recommend you perform the clean boot.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Try a system restore:

  Restoration of the system of windows vista DVD:

  Put the computer to an earlier point in time when the computer was working fine.

  1. Insert the installation disc.

  2. restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  3. If you are prompted, press any key to start Windows from the installation disc.

  4. choose your language settings, and then click Next.

  5. click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. in the System Recovery Options menu, click System Restore and follow the instructions.

  I hope this helps!

• Satellite A - Windows Setup cannot find a HARD disk

  Hi all

  I have a laptop which is a Toshiba A-Series and a few days ago, I had a problem on my laptop.

  Then I decidec to format my laptop Toshiba using Windows XP CD then there arrived a few steps, it gives the following error message:

  Setup did not find hard disk drivers installed in your computer.

  Make sure that the hard disk drivers are powered on and properly connected to your computer, and that no matter what disk - related hardware configuration is correct. It may be running a manufacturer - distribute diaagnostic installation program.

  The installation program cannot believe. To quit Setup, press F3.

  Could someone help me with this!

  Concerning

  Hello!

  Have you looked for a bit in the forum for this problem? You will find a large number of threads.

  However, you need the SATA drivers if you are installing your notebook computer with the Microsoft installation disc.
  I put t know what laptop do you have but for laptops equipped with Intel chipset, you need Intel Storage Manager.

  Download the drivers on the Web from Toshiba or Intel site, copy it to an external floppy drive and load it with F6 after booting from the CD.
  Or create you your own installation with nLite [www.nliteos.com] disc.

  Good bye

• Windows XP Setup cannot find a HARD disk

  I started to configure Windows XP from CD, but the installer is message that it cannot find the HARD drive on my computer. But the Windows Vista boot configuration process, it's average, this disc HARD work well. How can I solve this problem?

  * @ Periklis *.
  This has been discussed a lot of time here in the forum.
  You need SATA drivers to install Windows XP

  I recommend looking for some discussion here in the forum; Search, read and learn

  Tip: the SATA drivers are part of the Intel Matrix Storage Manager

  Good bye

• Windows XP Setup cannot find hard drive

  Running VMWare Fusion 2.01 (128865).

  I'm doing a repair of my installation of Windows XP Service Pack 3 on the VM.  I am able to boot from the CD and start the Windows Setup successfully.

  However, installing Windows says it is unable to find a hard drive and cannot continue.

  When I hit F3 and restart the computer, the virtual machine load XP on the virtual hard disk as before.

  How can I get the Windows installation to recognize my virtual hard disk and do a repair?

  Take a look at the following...

  If the virtual machine was created using Windows Installer Easy or has a VMware SCSI virtual hard disk, you must download the Drivers SCSI VMware and select the file vmscsi - 1.2.0.4.flp like the floppy drive of the virtual machine in the Virtual Machine settings sheet of the target. This disk image contains the necessary VMware SCSI disk drivers when booting with the Windows XP CD and you will need to press F6 when it says "press F6 if you need to install...". "at the bottom of the Virtual Machine window and it will then invite the driver after he continues to load additional files. Just follow the guests.

  BTW you may need to press the Fn + F6 etc. and this can be changed in system preferences > keyboard & mouse > keyboard > use all F1, F2, etc...

  If the Virtual Machine is not initiating the CD/DVD or ISO Image, and then select the CD-ROM in the Boot Menu.

  Engage the Boot Menu and select the CD-ROM drive...

  The bottom of the virtual machine just above the status bar after the Virtual Machine is started, it has...

  "Press F2 to enter SETUP, F12 for the start-up network, ESC for Boot Menu"

  On the status bar, it features...

  'To direct entry to this virtual machine, click inside the window.'

  BIOS flashing by is very fast so you need to work quickly however give it a try and if the Start Menu cannot be higher then the configuration of the Virtual Machine file .vmx must be edited to slow the STATION and or change the boot order.

  OK, click the big Play button on the screen of the virtual machine, and then quickly mouse click in the Virtual Machine screen and then press the ESC key to bring up the Start Menu and select the CD-ROM drive. If it boots the CD very well and if the Boot Menu does not appear, because he goes just to quick access and then try again or...

  Watch the Boot Delay section in the current user's Guide to VMware Fusion and the section of the virtual machine files of A Beginner's Guide to VMware Fusion on when the configuration of the Virtual Machine's .vmx file is and add the following lines to the file. TextEdit can be used to edit the .vmx file.

  To give more time to indulge, the Start Menu Add the following...

  bios.bootDelay = "3000".

  For, once, force the VM in the BIOS to change the Boot order in the BIOS if the CD-ROM is first add the following...

  bios.forceSetupOnce = 'TRUE '.

  Note: by default in the normal Fusion 1.x virtual Fusion function file are created in the folder "~/Documents/Virtual Machines" and according to host operating system version and or Fusion worm. There may be a .localized after Virtual Machines although by default, this extension is not visible in the Finder.

  ~ Is your Home Directory.

  The files that make up the virtual machine are placed in a folder (aka Bundle and or packing) bearing the extension '.vmwarevm' which, by default, this extension is not visible in the Finder.

  Example: "~/Documents/Virtual XP.vmwarevm Machines/Windows" in the Finder would just resemble an icon named "Windows XP."

  To view the contents of the entire file "Windows XP.vmwarevm" ctrl-click (or right-click) on the "Windows XP" icon and select Show the contents of the package.

  To change the configuration file of .vmx ctrl-click (or right-click) on the "Windows XP.vmx" file and select open with > choose another... then in Application choose TextEdit.

  Note: If you use Firefox do not copy and paste the parameters if TextEdit unless you copy only the exact line and nothing else in the case, use an editor such as TextWrangler.

  Also...

  When you use utility disk in order to have a bootable ISO Image, you must select Master CD/DVD without encryption in which case by default, it will have an extension .cdr file and in version 1.1 of the merger and later does not need to be changed in .iso, although one can if one chooses to. A default .dmg image is compressed and is not bootable, as an uncompressed .dmg will start if changed in .iso and of course the source CD/DVD should be bootable in the first place.

  To create an ISO Image using disk utility...

  1 insert the CD or DVD disc into the optical drive of your computer.

  2. open disk utility (/ Applications/Utilities/Disk utility).

  3. Select the CD or DVD drive in the list of disks and volumes.

  4. Choose file > new > "Disk Image from (name of the disc)."

  5. type a name for the disk image.

  6. choose "DVD/CD master" from the Image Format pop-up menu.

  7 choose "none" from the encryption pop-up menu.

  8. click on save.

  Also...

  Take a look on: VMware Fusion menu bar > help > VMware Fusion help > manage virtual machine > configure the CD/DVD drive

• P200-rt7 but Win XP Setup cannot find hard drive

  Hi, try to install xp on my Toshiba p200-rt7 and xp says it cannot find my hard drive. If I launch the install of vista dvd he finds it so I think I need to hit F6 during the xp installation and select "third-party drivers? If Yes, where can I get these drivers? If anyone can help?

  Thank you
  B

  Installing a version commercial (street copy) of Windows XP on a Toshiba Vista laptop.
  ----------------------------------------------------------------------------------

  Step 1: Prepare the BIOS
  -Go to section Support/Drivers on the Toshiba site and look for your model of Toshiba
  -If your phone has a separate version of BIOS for XP and Vista, download the BIOS XP and run it in Windows.
  -If you cannot start Windows, you can update the BIOS after installing XP.

  Step 2: Enable SATA Compatibility Mode in the BIOS
  -If installing XP cannot detect SATA drive, enable SATA Compatibility Mode in BIOS if this option is available and install XP.

  Step 3: Install XP using a floppy with the SATA drivers
  -If SATA compatibility mode is not available, you must use the SATA drivers diskette during installation of XP. Follow these steps:

  (1) Download driver Windows XP SATA F6 on the site of Toshiba Support/downloads.
  If a single SATA/AHCI F6 driver is unavailable, download and extract the Intel Matrix Storage Manager driver for XP in a temporary folder.
  The Intel Matrix Storage Manager driver package must contain some files under the folder "F6flpy". For example: C:\temp\Intel Matrix Storage Manager\F6flpy\ICH8M_32bit
  Choose the right folder. For example: ICH8M_32bit for a Chipset of Intel ICH8 during installation of Windows XP 32-bit.

  (2) copy these files (iastor.inf, etc.) on a blank diskette. The files must reside in the root directory of the floppy disk.
  For example: A:\iastor.inf, A:\iaahci.inf, etc...

  (3) connect a Toshiba USB floppy drive to the Toshiba laptop. (some non - Toshiba USB Floppy Drives may not work correctly during the installation of XP)

  (4) (4) demarrer start from the Windows XP CD, start the installation and make sure that your floppy with the drivers is inserted into the floppy USB drive.

  (5) for the XP installation invites you to press F6 to install a storage driver, immediately press F6.

  (6) for installing XP you invites to select a SATA driver, select the appropriate driver and continue.
  For example: ICH7M Intel(r) 82801GBM SATA AHCI Controller, Intel(r) ICH8M 82801HEM/HBM SATA AHCI Controller

  (7) keep the attached floppy drive and floppy disk inserted XP has not completed its installation.
  Do not partition or format the hard drive during the installation of XP. The diskette SATA drivers are copied and stored on the hard drive during the installation of XP.

• OS can not find Gigastore external HARD disk.

  Hello
  I have a problem with my new Gigastore external HARD drive.
  I have a windows 2000 and the operating system can not find the Gigastore external HARD disk.
  One of the systemrequires is that it is compatible with Windows 2000.

  Thank you for your help.

  Sincerely
  Luis

  You don't give much info.
  I would first go in "Device Manager" and check that there is not a question mark with "unknown device" beside him. If this is the case, highlight it and delete it, unplug your HARD drive and restart your computer. Check the Device Manager again, you will need to repeat the process without the connected HARD drive. Then follow the instructions of the manufacturer install the driver. In some cases, you will need to plug it in the first place, in others, first install the driver. The order is important.