Setup could not detect all the printers on the network

Similar Questions

• "Setup could not detect all the printers.

  I've recently set up a new computer and the network.  The host computer is running Vista.  I have connected a Deskjet 6940 via an ethernet cable into the Linksys router and can print from the host computer.

  I have a laptop which is under XP Pro, and who has a connection with the network.  I downloaded the driver from HP on the laptop to try to connect with the 6940, but during the install process, I get the message "Printer not found - Setup could not detect all the printers on the network."

  Firewalls on both computers is disabled.

  When I type the IP address in the address of the host computer or on the portable bar, I page of the printer, including its SSID.

  I tried to type the IP address in the field suitable for the installation of HP on the portable routine, however and always got the "printer not found."

  Ideas?  TIA

  The Deskjet 6940 being on the network, we will try to add the printer manually. Here is the sequence to XP:

  1. Click on the button 'Start'--> Printers and fax machines.
  2. Under print jobs, click on "Add Printer".
  3. Click 'Next' in the Add Printer Wizard window.
  4. Select " printer local to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5. Under Select a printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. In the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. Under "Add Standard TCP/IP printer Port", enter the host name of the printer . You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. Now, select HP in the manufacturers list, select your printer from the printer model list and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler and click on "next".
  11. Click "next".
  12. Click "Next" and "Finish."

• ePrint Setup could not connect to the network

  I have problem with my hp3515 all-in-one printer (two months). I am facing problem with ePrint. It has been installed correctly, but recently it has stopped working. HP wireless works and shows the IP address. When you press the ePrint button it gives the message that it could not connect to the internet. I tried to reconfigure ePrint and now it is not possible to reconfigure. I use a router D Link DSL-2750U.

  Hello

  First, I put a static DNS on the built-in web server (EWS). To do this:

  1. Type (example 192.168.XXX.XXX) IP address by itself in the address bar of the browser. Who will bring to the top of the EWS page. From there, you want to find the network tab. On this page, find the column that is usually found on the left and select 'network' and then on the network address to find net page (IP), then select this option. Who will bring to the top of the configuration page.
  2. You want to draw attention to section 2 entitled "DNS Configuration". Change the radial button to "Manual DNS"; for filling of favorite/primary DNS 8.8.8.8; for the secondary/Alternative fill 8.8.4.4 and then select 'apply '.
  3. If a message appears after it with an "OK" button carefully read this message! Most of the time this message is to inform you to click OK to cancel the change you made, if that's the message of case ignore, you can simply navigate to another tab on the built-in Web server to get away.
  4. Power cycle then the printer and it should then connect to web services

  As is printing wireless to other computers and static DNS should solve your problems of ePrint you would not need to uninstall at this stage.

  To reprint the touch of info page the button marked 'ePrint' on the front panel of the printer and that should bring up an option on the display screen to re - print information page.

• Windows could not detect all the wired or wireless [XP] network cards

  Hello
  Recently, I put in a new HARD drive but can't get online at all. Make a diagnosis of the State in Internet Explorer Tools, I got this:

  http://Tinypic.com/r/2qi4sae/5

  and

  http://Tinypic.com/r/11vthma/5

  I am at a loss here, any help much appreciated. Thanks for your time.

  Concerning

  Hello

  I suggest you to return these KB articles and check if it helps:

  http://support.Microsoft.com/kb/315275

  http://support.Microsoft.com/kb/325487

  It will be useful.

• Setup could not find all of the products available for installation. Windows Update suggests to install 125KO Office 2007 SP1 repeatedly.

  Hello!
  Update for Windows Vista x 64 to Windows 7 x 64 caused the following errors:
  By clicking on the "Edit" button in "Programs and features" with Office 2007 trial selected gives an error "Setup error".
  Setup could not find all of the products available for installation. Please contact your systm administrator. "in Windows 7 x 64. Run the installation of Office 2007 trial version downloaded the file to change the components OK works.
  How to operate the button "Edit"?
  Windows Update suggests to install 125KO Office 2007 SP1 repeatedly. I agree to install each time, updates installs "successfully", but suggest Windows Update to install next time. It started to happen after uninstallation and reinstallation of Office 2007.
  Kind regards
  Dima

  125 KB is obviously not a ServicePack because this would be much MB in size, you have a number of KB (knowledge base) to go with the annoying update?

  How to use a Setup log file to troubleshoot installation in Office
  http://support.Microsoft.com/default.aspx/KB/826511

  How to read the Windowsupdate.log file
  http://support.Microsoft.com/kb/902093#appliesTo

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  As for the "Changes" problem that I have no real solution for this, only that you remove every bit of desktop of your machine and everything don't reinstall desktop applications you need.  It could be a corrupted registry which is behind this problem.

• I try to install MSI 4.5 with the windowsXP-KB942288-v3 - x 86 .exe file. I get a lot of messages that Setup could not back up the registry key... 5. access is denied.

  MSI 4.5 installation problems

  I try to install MSI 4.5 with the windowsXP-KB942288-v3 - x 86 .exe file. I get a lot of messages that Setup could not back up the registry key... 5. access is denied.

  I get this for about 10 different registry keys. If I hit ignore whenever Setup ends, but he told me that he have not installed properly and windows may not work.

  Any body have ideas of how to do to solve this problem?

  Thank you

  I did some further research and came across this http://support.microsoft.com/kb/949377 while it is not the same update I tried to install it, the problem seemed similar. I tried Microsoft fix it at the bottom of the page and I tried again to install MSI 4.5. This time, it worked.

• Google Chrome could not connect to the network during installation...

  Currently I use maybe obsolete google chrome... But when I download the newest chrome and during installation... it could not connect to the network or internet connection so prevented me to install the new chrome... What's the problem? and how do it fix it? Thank you

  Try to download the full installer:

  Chrome for work: Chrome for work - Google

• Problem creating ad hoc network-error: Windows could not set up the network.

  Original title: problem creating ad hoc network

  Hello dear,

  When I tried to set up an adhoc network and after entering the name and password of the network. Following up error message pop (Windows could not set up the network).

  I use windows 7.

  P.S. before I used to create the ad hoc network with no problems. But now no more.

  Kind regards

  Ana Paula Yousef

  Hello

   
  Did you change in the computer before this problem?
   
  I suggest to go through these steps and check.
   
  Method 1:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to " http://support.microsoft.com/kb/946481 ".
   
  You can also check:
   
  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking.

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• Can not see all the networks Wi - Fi on Satellite P755-S5263

  Hello

  Just unwrap my gift: Satellite P755-S5263 and he can't see any wi - fi, I'm in the city and see a lot of networks on my BB and I press the touch button below the LCD for WE / OFF radio, nothing help, just orange light on the light wi - fi.

  No problems seen in Control Panel / networks, see Intel(r) WiFi Link 1000 BGN, works correctly and enabled, version of the 14.0.0.2 drivers.
  Is there any other secret of installation/swith that I don't know!

  I am on Windows 7, I really want to work today, appreciate your help. Thanks to all the guys.

  Gracias
  Viktoria

  Hello, Viktoria

  Perhaps is not activated WLAN card correctly?

  Please use the FN + F8 key combination and remember the wireless network adapter is correctly enabled.

  I hope this will help you.

• RSAC can't disable remote Firewall errors "could not access ServerName, the network name cannot be found.

  I opted for the "Restore default settings" option in the firewall while working on a client-side computer. For this reason got disabled the option "remote share' and now I can't access the machine remotely. The machine (which is not in the same network) does not monitor or keyboard attached to her and her to a different location so I can't physically connect you and activate this option.

  I tried to disable the firewall remotely, but the following command does not work.
  PsExec \\hostname u user_name password cmd.exe Pei

  It returns the following:

  Could not access ServerName

  The network name cannot be found

  Make sure you share the default admin$ is enable ServerName

  This fact has not resolved the question above.

  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\ and create or edit a REG_DWORD LocalAccountTokenFilterPolicy value and set the value to 1

  Help, please.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking%2Cw7itprovirt&filter=AllTypes&sort=lastpostdesc

  Hope this information is useful.

• Could not import all the Favorites in IE 8

  Recently experienced the premature death of all new hard drive, but was able to save the files including the IE Favorites on a flash drive.  Now, try to import the Favorites in IE 8 (there are 1 500 +, separated in subfolders).  Export the main folder on the flash drive was not a problem.  How can I import the entire lot without doing each one individually?

  http://support.Microsoft.com/default.aspx/KB/211089/en-us

  Internet Explore 7

  To export the Favorites folder, follow these steps:

  1. In Internet Explorer, click Add to Favorites, and then click import and export.
  2. In the import/export wizard, click Next.
  3. Select Export Favorites, and then click Next.
  4. Click Favorites , and then click Next.
  5. Select the Favorites folder that you want to export. If you want to export all Favorites, select the top level Favorites folder. Otherwise, select the individual folder that you want to export.
  6. Click Next.

     Note By default, Internet Explorer creates a Bookmark.htm file in your Documents folder. If you want to use a different name than the file Bookmark.htm, or if you want to store the Favorites exported in a different folder in the Documents folder, specify the new file and the name of the folder.

  7. Click Next.

     Note If you already have a file with the same name, Internet Explorer asks you to replace. Click Yes to replace the file. Click No to provide a new file name.

  8. Click Finish.

  Internet explore 8

  To export the Favorites folder, follow these steps:

  1. In Internet Explorer, click Favorites, click the arrow next to Add to your Favoritesand then click import and export.
  2. Click export to a file, and then click Next.
  3. Click to select the Favorites check box, and then click Next.
  4. Select the Favorites folder that you want to export. If you want to export all Favorites, select the top level Favorites folder. Otherwise, select the individual folder that you want to export.
  5. Click Next.

     Note By default, Internet Explorer creates a Bookmark.htm file in your Documents folder. If you want to use a different name than the file Bookmark.htm, or if you want to store the Favorites exported in a different folder in the Documents folder, specify the new file and the name of the folder.

  6. Click Next.

     Note If you already have a file with the same name, Internet Explorer asks you to replace. Click Yes to replace the file. Click No to provide a new file name.

  7. Click export.
  8. Click Finish.
  Back to top

  Import Import Favorites to Internet Explorer 6 and earlier versions

  Use the Bookmarks Converter tool to import the Bookmark.htm file into Internet Explorer on Windows 95, Windows 98, Windows 98 Second edition, Windows Millennium Edition, Windows NT 4.0, or Windows 2000.

  Import Favorites to Internet Explorer 7

  1. In Internet Explorer 7, click Add to Favorites , and then click import and export.
  2. In the import/export wizard, click Next.
  3. Select Import Favoritesand then click Next.

     Note By default, Internet Explorer creates a Bookmark.htm file in your Documents folder. However, you can import favorites that are saved under another name. To do this, click Browse, select a file or type a location and a file name, and then click Next. Or, click Browse, and then click Next to accept the default value.

  4. Select the folder where you want to place the imported bookmarks, and then click Next.
  5. Click Finish.

  Import Favorites from Internet Explorer 8

  1. In Internet Explorer, click Favorites, click the arrow next to Add to your Favoritesand then click import and export.
  2. Click import from a file, and then click Next.
  3. Click to select the Favorites check box, and then click Next.
  4. By default, Internet Explorer creates a Bookmark.htm file in your Documents folder. However, you can import favorites that are saved under another name. To do this, click Browse, select a file or type a location and a file name, and then click Next.
  5. Select the folder where you want to place the imported bookmarks, and then click import.
  6. Click Finish.

  See you soon.

  Mick Murphy - Microsoft partner

• ESX 3.5 and I seem to have lost all the networks.

  DL580 G4 with ESX3.5. I've migrated all clients to another ESX Server, but it went a bit strange to say the least.

  After the migration, all the guests off I went forward and add more ram and restarted. Server come OK, tells me the IP address to connect to (static) but that's all.

  I can ping 127.0.0.1, but not static host ip address, I get an error "connect: could not connect to the network.

  If I check the following localions I get zero information in files

  / etc/hosts

  etc/network-scripts/ifcfg-vswif0

  etc/VMware/ESX.conf

  If I try the list of network adapters that I get no NICs in the list, if I have the material list network get hardware type and mac address.

  I see no switch to vmware if I try esxcfg-vswitch - l

  I tried to restart the network and a few other services that I found on Google, now claim.

  If I start using ERD Commander and enable networking I can not use the 2 onboard NICs but can use 2 additional network cards / 4 ports and can ping / map of external drives.

  Hello

  I think it would be a case of corrupted file esx.conf. After the upgrade of the host by adding more ram or anything else, you may need to update the initrd image that you don't have and this translates into the corruption of your esx.conf file. Until that time, that it's the only imagination, I can take.

  Now, there are simple process of recovery of the original esx.conf file. Please see the procedure below.

  #

  Connect to the ESX host with a SSH client, or connect directly to the ESX with KVM console.

  #

  Back up the corrupted file esx.conf using the command:

  CP esx.conf /tmp/esx.bad

  #

  Copy the image into a temporary directory using a command similar to:

  CP /boot/initrd-2.4.21-47.0.1.ELvmnix.img/tmp

  Note: The version of the initrd image is different from the ESX 3.x. If the version in the command / tmp /boot/initrd-2.4.21-47.0.1.ELvmnix.img cp is different, cd to the directory/boot and run the ls command to see your version.

  #

  Decompress the image file using the command:

  CD/tmp

  gunzip - dc initrd - 2.4.21 - 47.0.1.ELvmnix.img > initrd.unziped

  #

  Create a directory and mount the uncompressed image using the commands:

  mkdir initrd

  Mount-o loop initrd initrd.unziped

  #

  Copy the file esx.conf to the directory mounted at/etc/vmware/en using the commands:

  CD/tmp/initrd/etc/vmware

  CP esx.conf/etc/vmware.

  #

  Remove the directory mounted in step 5 by using the commands:

  CD/tmp

  umount/tmp/initrd

  #

  Restart management agents for the changes to take effect.

  Now other solutions could be looking to recreate the Console of the ESX Service and see if that can help you. Procedure is as below:

  On your system, the vswif, vmnic, numbers of vSwitch and network settings are different.

  1.

  Run the following command to list the name of the map of vswif:

  esxcfg-vswif - l

  2.

  Run the following command to remove the adapter vswif:

  esxcfg-vswif - del vswif0

  3.

  Run the following command to list the name of the vSwitch:

  esxcfg-vswitch - l

  4.

  Run the following command to remove the vSwitch:

  esxcfg-vswitch vSwitch0 d

  5.

  Run the following command to create the vSwitch:

  -an esxcfg-vswitch vSwitch0

  6.

  Run the following commands to create ports for vSwitch default groups:

  esxcfg-vswitch - a 'network of the VM' vSwitch0

  esxcfg-vswitch - a "Service Console" vSwitch0

  7.

  Run the following command to create the adapter vswif:

  esxcfg-vswif - add-- ip = nnn.nnn.nnn.nnn-"Service Console" portgroup mask = 255.255.255.0 subnet vswif0

  8.

  Run the following command to verify that the settings in the network file are correct:

  sysconfig cat

  Networking = yes

  GATEWAYDEV = vswif0

  HOSTNAME = Host.domain.com

  Gateway = nnn.nnn.nnn.nnn

  9.

  Run the following commands to list all network cards and associate a vmnic which has a status of site link:

  esxcfg-NICS - l

  esxcfg-vswitch - L vmnic1 vSwitch0

  10.

  Run the following command to verify that the vmnic is associated with the vSwitch:

  esxcfg-vswitch - l

  11.

  IP address ping to verify network connectivity. If the ping fails remove the previous vmnic from the vSwitch and try another adapter that has a

  State of the link towards the top.

  esxcfg-vswitch - U vmnic1 vSwitch0

  esxcfg-vswitch - L vmnic2 vSwitch0

  12.

  Run the following command to change the ID vlan a vSwitch

  # esxcfg - vswitch - p "VM network 1" - v 10 vSwitch0

  13.

  If you make manual changes to sysconfig, run the following command to restart the network service:

  service network restart

  If you find this helpful please mark some reward points for this.

• When we install, we get massage: "we met the following problems. Setup could not initialize. This could be due to a missing file. Please download Adobe Support Advisor th detect the problem. "However, when we click on"Get Adobe Support Advisor.

  When we install, we get massage: "we met the following problems. Setup could not initialize. This could be due to a missing file. Please download Adobe Support Advisor detect the problem. "However, when we click on"Get Adobe Support Advisor. It is not to us to show how to solve the problem.

  Hello

  Please see failed to initialize the installation program

  "Installer initialization failed." I have tried everything what it but no dice.

  setup initialization failed

  I hope this helps!

• I have download CC and installed the trail of the illustrator of last week, but it disappears all of a sudden, he says that Setup could not initialize

  Hello. I have download CC and installed the trail of the illustrator of last week, but it disappears all of a sudden, I couldn't find it on my computer and I try to reinstall, but it says that Setup could not initialize. I use win8

  Please see the links below.

  • Error: "cannot install initialize | Windows
  • The Adobe CC Installer failed to initialize [windows OS]
  • Creative cloud Installer fails to boot into OSX Mavericks

  Hope this will help you.

  Kind regards

  Hervé Khare

• 5 error message when you try to run gimp - 2.18.16 - Setup could not create the directory

  5 error message when you try to run setup.exe gimp - 2.18.16 after downloading... it reads:
  Setup could not create the directory
  c:\Users\DEBSWO~1\AppDate\Local\Temp\is-IKDP5.tmp ".
  Error5: Access denied
  In the Temp folder under Security I have:
  'SYSTEM' with full control
  "Administrators" with full control
  "Username" with full control
  All of which is listed in the permissions, but the box for'Include the permissions that can be inherited from the parent to this object "below is checked but not really dim so that you cannot check or uncheck the box?"
  The two latest downloads gave the same error message.

  Thank you for your time.
  Debbie

  I suggest you do this:

  1. click on the start planet.
  2. type cmd.exe in the search box.
  3. press on Ctrl + Shift + Enter
  4. click on "run as Administrator".
  5. type the following commands exactly and press ENTER after each:
  takeown /f "%Temp%" / r

  Cacls "%Temp%" / t/c/g "%nom user %": F System: F

  (Enter Y when you are prompted "Are you sure?")