Setup.exe has stopped working, try to install Allods Online, the new MMO

I'm having a problem with my setup.exe Allods... I can't seem to run. It is said that setup.exe has stopped working
a problem causing the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
I tried to change the compatibility settings, I tried to run as administrator (Yes it's Vista! surprise...) and I tried the Msconfig.exe to fix.
I'm desperate... It's the signature of the problem below. Signature of the problem
Problem event name: APPCRASH
Application name: setup.exe_unknown
Application version: 0.0.0.0
Application timestamp: 4a2ae2a2
Fault Module name: RichEd20.dll
Fault Module Version: 5.31.23.1228
Timestamp of Module error: 4791 has 775
Exception code: c0000005
Exception offset: 0001e469
OS version: 6.0.6001.2.1.0.768.2
Locale ID: 1033
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f87834160

Additional information about the problem
Bucket ID: 1718522889

Please just ask for more information.

Check it again. http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

Windows Vista Compatibility Center

First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

If this is not Vista compatible, read the info on the link above.
It works for some programs, but not all.

This applies to software programs, NOT hardware drivers.

If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe

Run as Admin

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If the above does not fix it:

It comes with Vista, upgrade install and activate Forum.

http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

They will help you with your question in Forum Vista programs at the above address.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Windows Vista. Setup.exe has stopped working and I can't get the program to load.

    I have a Gateway laptop with Windows Vista.  I put Norton anti-virus on it last year.  Now I am trying to run the new disk of Norton and the computer tells me that setup.exe has stopped working and I can't run the program. Norton 2008 has been removed.

    http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

    Download/run their abovelink Norton Uninstall tool to ensure that all "Norton" is deleted.

    Then, right-click on the setup.exe Norton > run as admin.

    If the above does not help:

    http://www.Symantec.com/en/AU/Norton/support/index.jsp

    Contact the Norton Support for problems with their software.

    See you soon. Mick Murphy - Microsoft partner

  • Error 'setup.exe has stopped working' when installing Quicken.

    Original title: setup.exe has stopped working

    I have read through the related forums and don't think I've seen a solid answer to this problem.  I'm trying to reinstall Quicken on my Dell Inspiron 530 Vista with service pack 2.  (Long and ugly tells how he got deleted at first - thank you, Intuit).

    When I try to install Quicken, I get the above error message.  I tried the clean boot solution; I tried to enter the installation and execution of the exe directly from there; I tried to do a right click to open/run as administrator... etc.

    I have NOT run BigFix.com or other third-party software to solve this problem - I'm very comfortable with another piece of software download and throw into the equation.  What is a corrupted registry and I have TO run third to fix?  Is it a bug of Vista - is there a fix of bug for her?

    I really don't like that to 'guilty' at this point, I just want to repair and recover my electronic payments!  Help, please!

    Hey, Keenon,.

    Please, remove all existing components of Quicken from the computer and do a fresh install.

    Step 1: use QcleanUI uninstall Quicken

    Follow the instructions in the article below for more information on how to use this tool.

    The use of QcleanUI to uninstall Quicken


    Step 2: Install Quicken

     

    Refer to this article for installation help.

    Installation of Quicken on Microsoft Windows 7 or Vista

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

    When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

    Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

    Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

    This can be caused by the NVIDIA chipset driver:

    https://decibel.NI.com/content/message/46299?TSTART=-130

    Thank you
    Sacha

  • When you try to uninstall a program, I get the message setup.exe has stopped working, can someone help me with this problem

    I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working

    Hello

    ·         Faced with this problem specific to uninstalling the application with the printer, or with another application?

    ·         What is the brand and model of the printer?

    You can follow the method below and check if it helps.

    Method 1:

    I would say as you put your computer in a clean boot state and check if it works.

    How to troubleshoot a problem by performing a clean boot in Windows

    http://support.Microsoft.com/kb/929135

    Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.

    Method 2:

    I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.

    http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

    Hope this helps,

  • Satellite Pro U400 - TrueSuite Manager setup.exe has stopped working

    I have a Satellite Pro U400 running Vista Business (OEM) and at the start of a desktop computer TrueSuite Manager pop-up message appears telling me there is an update to install.

    When I try to install the update, I get a window that says Setup.exe does not work.

    Signature of the problem of the relationship an APPCRASH-is30C0.exe with the exception C0000005 code.

    I tried to uninstall the TrueSuite Manager through Windows uninstaller programs, but get the same message - setup.exe has stopped working.

    Appreciate advice on how to solve this problem.

    Hello

    I think that it is a simple case of corrupted registry entries and files that could belong to the TrueSuite Manager software.

    I agree with the previous user, and I recommend to reinstall this software again.
    You may need to clean the OS before installing the Truesuite again.
    In this case, I recommend the CCLenaer. It s a simple and free tool and can be downloaded on most Web sites.

    Google and you should find more information.

    See you soon
    Jayjay

  • I'm putting a game on my computer and repeat me setup.exe has stopped working

    I'm loading Jewel quest games on my computer.  Whenever I start a window appears which says setup.exe has stopped working - please help if anyone has any ideas to try

    Hi shellyart,

    ·         What is the exact error message?

    ·         Have you made changes on the computer before this problem?

    ·         What version of Jewel Quest you trying to install?

    Follow these methods.

    Method 1: Run the game as administrator.

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-allow-an-application-to-run-once-with-a-full-administrator-access-token-in-UAC

    Method 2: You can also try the game in compatibility mode and check if it works very well.

    http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

    Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

    Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.

    For reference:

    Quest http://www.Microsoft.com/Windows/Compatibility/Windows-Vista/Search.aspx?type=Software&s=Jewel

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-mark-an-application-to-always-require-a-full-administrator-access-token-user-account-control

    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  • Uninstall Napster - error saying setup.exe has stopped working

    Try to uninstall Napster found on my computer, but get the error message saying setup.exe has stopped working. Please help get rid of Napster!

    Hello

    Follow the steps in the link given below and check if that helps.

    http://support.Microsoft.com/kb/2438651

    If the steps above did not help, I suggest you to install the program and then try to reinstall and check if that helps.

    Hope it will be useful.

  • Setup.exe has stopped working


    Hello, I am trying to install a driver for a "Turtle beach II Micro" usb sound card. Whenever I try to open the .exe file, I get the following:
    Setup.exe has stopped working

    A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

    I deleted and redownloaded the file exe, rebooted, ran sfc and for the purposes of troubleshooting, I put this card its usb on another computer in Windows 7 (bridge) and the .exe charges very well, my Dell gives me this problem. Both are Win 7 Home Premium
    Any help or advice would be appreciated
    Thank you

    Hello Lousyshot,

    On the computer Dell, right click on the file setup.exe to the Turtle Beach Micro II and select 'run as administrator '.
    Does make a difference? You are using an administrator account when you try to install the sound card? »

    Did you check Event Viewer to see if there are errors on the installation failure?

    Please answer back with an update and let us know if it helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Error: "Setup.exe has stopped working".

    Trying to open a downloaded file that updates a driver Lexmark (Z600), the process ends quickly with the dialog box stating that "Setup.exe has stopped working. Windows Explorer needs to close".

    You can try a right-click on the setup.exe > run as admin.

    Or repost in the following Forum:

    It comes with Vista, upgrade install and activate Forum.

    http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

    They will help you with your question Driver Vista Hardware and drivers Forum above.

    See you soon.

    Mick Murphy - Microsoft partner

  • WRT400N setup.exe has stopped working

    I just got a HP Pavillion desktop computer new with Vista 64 and I have problems installing. Whenever I put the installation disc in the drive it does not load and I get an error message telling me that setup.exe has stopped working and will be forced to close. I even tried to jump the autorun and will my CD-ROM drive and manually select the file setup.exe. The initial splash screen appears and says please wait loading but I never have any more than that because the program crashes. I thought that maybe the drive was defective, but I tried it on a XP desktop and an XP netbook and the disk works fine on both. What gives? I searched this whole Forum and it seems I am the only person with this problem. My new defective computer or is it the user

    OK, so I finally understand for me. I did an exploring more of the disc and found a file named setup64.exe and TADAAAAA this file runs. But I still can't LELA to run but hey at least I have everything works now

  • Big fix setup.exe has stopped working

    While cleaning hard drive, I find that I can't uninstall a program oem "BixFix" setup.exe has stopped working... any suggestions would be much appreciated.

    Colleen Clark

    Hello

    Try the free version of revouninstaller

    http://www.revouninstaller.com/revo_uninstaller_free_download.html

  • Satellite A300D - upgrade Vista - "Setup.exe has stopped working".

    Hello

    I use Satellite A300D with Vista and I tried to upgrade to Windows 7 using Toshiba upgrader.

    After the language selection and proceed to the other steps, it asks me to uninstall a bunch of programs. Some are uninstalled very well, but when it comes to four other programs he says "Setup.exe has stopped working" and it does not uninstall.

    I tried to uninstall the manually, but I got the same message.

    These programs are;
    Setup driver Atheros
    Toshiba hardware configuration
    Toshiba supervisor password
    Realtek High Definition Audio Driver

    So I can't go ahead with the upgrade.

    Anyone know what could be the problem?

    Thanks in advance,

    Pouvez - TR
    .

    Hello

    Anyboday tried to run the upgrade as an administrator? Therefore, click on the setup.exe file on the upgrade disc and run it as an administrator.

    Moreover I also upgraded from Vista to Windows 7, but in the manual supplied with the notebook, I founded the information, that it s to start the upgrade directly after a new installation of recovery.

    If you did a recovery facility before the upgrade?

    Welcome them

  • "MessagingApp.exe has stopped working" error when I turn on the computer.

    In the last few days I have been making a "MessagingApp.exe has stopped working" message every time I spend on the laptop. When I go to "All programs" all windows and Yahoo programs are red in color. I did a search for "MessagingApp.exe" but it is not found, but when I looked in 'Program Files'-'alternative E-mail' I found it but it will not run. I can't connect to Yahoo Messenger.Can help you? I have Windows Vista Home Edition thank you, McEvor

    original title: error MessagingApp.exe

    Hello McEvor,

    1. don't you make changes to the system before the show?

    2. Since when have you been faced with this problem?

    Try the following steps to try to get the fixed number.

    Step 1:

    Try to put the computer in a clean boot state to see if the same message appears

    A clean boot helps eliminate software conflicts. Visit the link below to learn how to perform a clean boot.

    http://support.Microsoft.com/kb/929135

    Note: Once the troubleshooting is over; reset the computer to start as usual in following step 7 from the link above.

    Step 2:
    An analysis of security and verification for infections.

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    1. you can run a virus scan online from the link given below and check if the problem persists.

    Microsoft safety scanner

    2. in addition, make sure that you have installed on your computer, antivirus software was last updated so that it works correctly.

    If the problem persists, please contact support messenger yahoo from the link below for more support.

    http://help.Yahoo.com/l/us/Yahoo/helpcentral/

    Hope the helps of information provided.

  • "COM Surrogate has stopped working" - error when browsing photos on the new version of Windows 7

    Just built a new pc and installed Windows 7, everything works fine but whenever I browse photos using the photo viewer, it freezes and opens with "COM Surrogate has stopped working" (after 10-20 photos - happens every time).

    I read online about possible errors - I do not have Nero or DivX installed so cannot include those. I also can not disable Protection for the execution of the data for dllhost.exe is 64-bit Windows, so it will not allow him.

    Any help would be much appreciated: it's very frustrating!

    If you have a laptop with optimus or ati changegraphic, you must add the dllhost.exe to the graphics card performance. After that it should be to fix the problem.

    concerning

    Joachim

Maybe you are looking for

  • Envelopes (incoming e-mails) along the top of the screen are in practice no order are so useless, what is it for?

    I can't find the intuitive user interface, but I would like to use all the features that are useful.For the moment, I get, but the interface makes feel me stupid.

  • Reset iPhone when restrictions are on

    My son iPhone 5s has lit restrictions and in the House, no one knows what is the password! The phone uses my husbands iTunes account, but the App Store is not available on this subject, probably because of the restriction settings. We try reset the p

  • Try to update the iMac G5 DMG 10.5

    I have an old iMac G5 with 10.4.11 on it. He has a bad CD drive and can't seem to even a superdrive Apple CD/DVD, when connected by USB. So I a. My 10.5 installation disk DMG file. First I tried to copy it to a Firewire hard drive, but the iMac won't

  • Pavilion-p6-2494ea: graphics card tips

    I have a question about my graphics card I would like to update, but do not know if my motherboard will work with her etc, my computer is a Pavilion-p6-2494ea. I'm looking to get a MSI R9 390 Games 8 g graphics card , but I don't know if it will work

  • Bold 9900 event log

    The usual key combination of Alt - L Alt - Alt - Alt and G L does not backup the event log on the simulator of the Bold 9900.  Instead, as soon as the first Alt - L is typed, a search begins with a double quotation mark is entered in the search field