Setup failed: Setup could not find a device supported to write the image of the system of

Hi, I just downloaded VMWare ESXi 3.5 and I can't seem to install on my system. Error, it evokes, installation could not find a support designed to write the ESX 3.5i system image, what device should I see, I have a hard drive works perfectly installed what should I?

all responses appreciated

Kind regards

Mykola

Take a look at these.

http://www.VM-help.com/ESX/esx3i/Hardware_support.php

http://www.VM-help.com/ESX/esx3i/find_PCI_ID.php

http://www.VM-help.com/ESX/esx3i/ESXi_install_to_IDE_drive/ESXi_install_to_IDE_drive.php

Tags: VMware

Similar Questions

  • Cannot find a device supported to write image vmware esxi 4.1.0

    I have a Dell Poweredge R410 (service tag XXJ1FQ1) with a Raid 10 for PERC S300 controllers with 4X250GB drives.

    I downloaded the iso 4.1.0 ESXI and can boot from the DVD, but after agreeing to the terms. The installation program will fail and I get this error:

    «Could not find a device supported to write image VMware ESXI 4.1.0 to.»

    I checked the compatibility Web site: http://partnerweb.vmware.com/comp_guide2/detail.php?deviceCategory=server & productid = 4932 deviceCategory = server & partner = 23 & releases = 24 & keyword = poweredge % 20r410 & systemTypes = 2 & page = 4 & display_interval = 10 & sortColumn = Partner & sortOrder = CSA

    And my system should be OK.

    Has anyone experience this problem? And how to do this?

    Easy.  You cannot use the card s300.

    S300 work only in windows environments.  I also learned that the way lasts.  (Thanks Dell!)

    Pick up a Perc 6 / i and you will be ready to go.

  • Setup could not find all of the products available for installation. Windows Update suggests to install 125KO Office 2007 SP1 repeatedly.

    Hello!
    Update for Windows Vista x 64 to Windows 7 x 64 caused the following errors:
    By clicking on the "Edit" button in "Programs and features" with Office 2007 trial selected gives an error "Setup error".
    Setup could not find all of the products available for installation. Please contact your systm administrator. "in Windows 7 x 64. Run the installation of Office 2007 trial version downloaded the file to change the components OK works.
    How to operate the button "Edit"?
    Windows Update suggests to install 125KO Office 2007 SP1 repeatedly. I agree to install each time, updates installs "successfully", but suggest Windows Update to install next time. It started to happen after uninstallation and reinstallation of Office 2007.
    Kind regards
    Dima

    125 KB is obviously not a ServicePack because this would be much MB in size, you have a number of KB (knowledge base) to go with the annoying update?

    How to use a Setup log file to troubleshoot installation in Office
    http://support.Microsoft.com/default.aspx/KB/826511

    How to read the Windowsupdate.log file
    http://support.Microsoft.com/kb/902093#appliesTo

    Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

    As for the "Changes" problem that I have no real solution for this, only that you remove every bit of desktop of your machine and everything don't reinstall desktop applications you need.  It could be a corrupted registry which is behind this problem.

  • Windows could not find a certificate to log on the network

    So I try to connect to the network that appears, and then trying to connect but it with "Windows could not find a certificate to log on the network. Now, I tried unchecking security in the properties box and also to uncheck it to 'use windows to configure my wireless network.

    NONE OF THESE WORK FOR ME!
    Also attempted to fix the network, but he says that "windows could not finish repairing the problem because it is impossible to perform the following action: connect to the wireless network '"
    I am currently under SP2, but in the process of installing SP3.
    Help!

    This error usually occurs because you have specified a connection protocol 802. 1 x.  You must configure your properties to uncheck this box.  See the following article:

    "Windows could not find a certificate to log on the network.

    <>http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Networking/window-was-unable-to-finad-a-certificate-to-log/f68d2ea6-51c4-4B86-a5de-da4d06afb50a >

    HTH,
    JW

  • Error "Windows Media could not find a certificate to connect to the network" when connecting to a secure wireless network with WPA2.

    Original title: I'm having a problem trying to connect to a Windows XP SP2 to a wireless secure with WPA2, had this error "Windows Media could not find a certificate to connect to the network.

    Not Applicable

    Hi StheveOses,

    As Cameron O have rightly said, you must have Service Pack 3 and other important updates installed. If you continue to experience problems with the connection to the wireless network, you will have a quick glance at this article.

    How to troubleshoot wireless network connections in Windows XP Service Pack 2

    (Works for Windows XP SP3 as well)

    I hope this helps.

  • error message: "windows could not find a certificate to connect to the network.

    My NetGear wireless icon shows this error message "windows could not find a certificate to connect to the network.

    Hello

    Did you change your computer before this problem?

    You can follow the procedure in the article.

    Unable to connect to the network: Validation and certificate in Windows XP and Vista errors

    http://KB.NETGEAR.com/app/answers/detail/A_ID/7334/~/unable-to-connect-to-network%3A-validation-and-certificate-errors-in-Windows-XP

    Alternatively, you can contact Netgear support to improve assistance in this regard.

    Welcome to the NETGEAR support

    http://support.NETGEAR.com/

  • Internet connection issues "Limited or no connectivity." and "windows could not find a certificate to log on the network.

    I'm so unable to connect to the internet?

    Hello.

    I'm so unable to connect to the internet.

    Since I've renamed our WiFi network and add a WEP key, I have problems with wireless connection on my
    Windows XP computer desktop, which is a Dell Dimension 4700.

    The questions that I get connection are...

    "windows could not find a certificate to log on the network.

    "Limited or no connectivity."

    I did all the solutions I could try to fix the connection problem!

    1. once I received the message "limited or no connectivity", I click with the right button on the connection and click on repair. It is not always connect for me and I got the "limited or no connectivity message.»

    2. then, I disabled the network connection and then enabled. That no longer works.

    3. I tried to withdraw from the ordered list of connections, and it still doesn't work.

    4. I checked the driver manager, and initially the Ethernet driver was outdated and missing of its pilot. He had a yellow question mark with a black sign and yellow with an exclamation mark inside.

    5. I used DriverZone, downloaded the driver, installed and rebooted the computer after the installation of the it. Apparently, it worked. But I could not always connect.

    6 I have ensured that I entered the correct WEP key, and then adjust the settings correctly. I did it like 10 times in a row and would not always connect.

    7. I tried to go to the command prompt and typed in IP Config/All and that's what I mean.

    Windows IP configuration
    Node type: unknown
    Active IP routing: no
    WINS proxy enabled: no
    ETHERNET connection to the Local network card
    State of the media: Media disconnected
    Description: Intel PRO/100 VE Network Connection
    Ethernet card 2 wireless network connection:
    Suffix the connection-specific DNS: (EMPTY)

    8. after that, I typed the command: ipconfig/release
    and then I got this error...

    No operations can be performed on the connection to the local network, although it has its media disconnected.

    9. after that, I tried Googling for some solutions, and the solutions I found were not any use.
    A solution was

    10. opening of Services...
    Start | Run | Type: services.msc | Click OK |
    Scroll down to and double-click Client DNS | Set to automatic on startup
    type |
    Click apply | Click the Start button | When it starts, click OK
    Do the same for the DHCP Client.
    Do the same for the remote procedure call (RPC).

    and it still doesn't work.

    11. when I look in the menu network connections, I see my connection with a lock on the side, with a red X under the lock and key. In the description, I see not connected, protected by a firewall. How could I remove the internet connection firewall? I disabled the firewall and that did not work.

    12. I tried to uninstall and reinstall the network card and who does not work either.

    It is not the network itself that is the problem.  It is not the modem or the cable. There are no disconnected son or something like that. We have other computers in the House and the internet works fine on other computers. As I said, since I renamed our WiFi network and added a WEP password, I had problems with connecting to my Windows XP computer.

    My computer has updates that must be installed as well. Updates would fix the problem? I just need to have internet.

    What should I do? Thank you for your time.

    Sincerely,

    Justin

    Have you tried to set the value of the link speed/duplex mode? I had the same problem you describe. Your card is only capable of 10/100 communication.

  • NO wireless network connection - message "Windows could not find a certificate to connect to the network Shaida. How to fix this problem?

    I had just restored my Thinkpad T60 the default setting. Reformatted and reinstalled Windows XP, but I am unable to connect to the wireless network connection - message "Windows could not find a certificate to connect to the network Shaida.

    Shaida is my wireless modem.

    How to fix this problem?

    Before the resumption of connection Internet worked normally.

    Hello

    I suggest you to follow the steps in this link and check if it helps:

    http://support.Microsoft.com/kb/870702

    It will be useful.

  • Unable to connect on the internet on another computer - "Windows could not find a certificate to connect to the network (named).

    When I try to connect to internet on my other computer I get a message saying "Windows could not find a certificate to connect to the network (name)". It's only since I've had a second computer as it does on my old computer which is

    a laptop HP Pressario with Windows XP Home Edition. Someone told me to go to authentication in wireless networks, but can highlight something here as everything is gray.

    Hello

    · What type of encryption do you use on the router?

    · You have the latest drivers for your wireless network card?

    Make sure the authentication IEEE 802. 1 x wireless card is disabled, and check if that helps.

    a. Click Start, then select run.

    b. term ncpa.cpl type dialog box and then click OK.

    c. right click on wireless network connection icon and select Properties.

    d. click the wireless network tab.

    e. click on the properties button next to remove it.

    f. click on the Authentication tab, and then clear the authentication 802. 1 x IEEE select this network check box.

    g. click OK to update the settings.

  • Setup could not find any supported network devices

    Hi all -

    I try to install ESX 3.5 on Windows 6.5 for learning virtual machine. During installation it says "Installer could not found no supported network devices.

    My Intel Core2 WD system and the NETWORK interface is "Realtek RTL8168 (p) / 8111 PCI Gigabit Ethernet.

    Please let me know why I get this error.

    Thanks in advance... J

    Shiv

    Make sure that the virtual network adapter is connected - also if you did not check the white paper on the http://knowledge.xtravirt.com/ title VI3.5 in a box - provides detailed instructions on how to set VI 3.5 under my computer.

    If you find this or any other answer useful please consider awarding points marking the answer correct or useful

  • Driver Installation Failed: Could not find media device for this driver

    I have a HP with Windows Vista (32 bit) dv6646us and have had a problem with the audio device. The sound works sometimes, but above all the system does not even recognize the audio output device (in this case, I see the speaker icon in the taskbar with a cross mark). Another model is that the laptop does not recognize the audio device, but no sound is produced (in this case, the "speaker" icon doesn't have the cross mark). When the system has at least recognize the audio device, I can solve the problem by using the Microsoft Fix it 50131. However, when the system does not recognize the audio device, nothing seems to work. When I go into Device Manager, there is no sound, not just a pilot section. The laptop is supposed to use Conexant High-Definition Audio Driver, but when I try to install it, I get the following message: failure of the driver Installation: Media not found device for this driver.

    In another forum, someone has solved the same problem in a system with the 32-bit version of XP by downgrading his memory from 4 GB to 2 GB, based on his knowledge that a 32-bit system cannot take 4 GB of RAM (it has started having the problem after that first, he upgraded the RAM from 2 GB to 4 GB). However, I don't know if the same applies to my problem because the sound system sometimes works with the current system with 4 GB of RAM and also my laptop is supposed to hold up to 4 GB of RAM (and he does not the 4 GB of RAM). So, I was wondering if there is another possibility for a cause and a solution to this problem.

    Hello

    ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

    ·         Do you think the audio device when there is no X on the volume icon?

    I suggest you follow the steps mentioned below:

    Method 1:

    You can follow this section "By my speakers is crackled or distorted" in the link below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

    Method 2:

    If the previous step fails, uninstall and reinstall the audio drivers completely, follow the steps below:

    a. click Start, type Device Manager in the Start Search box and press ENTER.

    b. click continue. The Device Manager dialog box appears.

    c. If you are prompted for an administrator password or a confirmation, type the password, or click continue.

    d. in r management device, right click on audio and its driver and click on uninstall.

    e. install the last driver audio drivers on the manufacturer's Web site.

    Method 3:

    If the previous step fails, follow the steps described in the following link:

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  • could not find USB device & not print screen

    I'm sorry, but I have another question. I'm so sick of this. I swear that my system, the material is good (tablet of Motion LE1600 quite common with WinXP svc pk 3 & Security Essentials from a full reimage a month ago)

    All of a sudden today, my tablet is not my mobile phone which is connected with a USB cable, so ActiveSync starts. I messed with the USB cable and moved to another plugin. It plugs into the Tablet directly and not through the recharge base.

    In addition, at the same time, my USB keyboard does not at all on this pc. But the USB mouse works fine!

    So there is a problem with the USB plug-ins, I guess. Do not know what has been changed, but I've probably done something, or who knows...

    In addition, my e: drive drive USB which uses the Live Image to make full backups said it is in pause Mode. Don't know what it is, but I bet that it is not connected somehow, although if I look at my computer, I see e: listed there.

    And when I start my pc and connect, I get this pop up in the taskbar saying that some Windows delayed write failed for a file named e:\$Mft. The data has been lost (?). Since print screen will not work to create an image in Paint Shop Pro, it has been challenging trivia note.

    And I look at the table Motion, which helps you set up the Tablet and periphials, dashboard and under Microsphone, he said an input control limited - Knowles Intellisonic software is not enabled.

    I looked in all programs and in my computer > all programs and I see nothing named Knowles and Intellisonic. I have no idea what to do, TI, it is still important.

    Help!

    Solved (for now!). I went to F8 on reboot and did the last good known Configuration and it worked. I'm very happy now...

  • Error: could not find c:\windows\idew321.dll in the beginning upward

    This error at the end of the boot.  Cannot find any references to this dll through Google searches.  I got infected with a virus called system tool and wonder if the virus is still there, looking for this dll.

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that your system has or has had an infection, follow up with this:
    Perform scans for malware, and then fix any problems:

    No matter what you use for malware protection, follow these steps:

    Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

    They can be uninstalled later if you wish.

    In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

    Restart your computer and solve the outstanding issues.
  • Windows could not configure one or two components of the system.

    I get this message after completing my update, Vista Home Premium 64 Vista Ultimate 64. All solutions?

    Hello

    1 you have a Windows Ultimate Upgrade disc, a complete edition of the full Windows disk or a Windows Anytime Upgrade disc?

    2 - is Windows XP or Windows Vista already exist on the computer before you install Windows Vista Ultimate?

    Currently, I suggest referring to the following troubleshooting article and thread:

    Windows could not configure one or more system components

    http://forums.Microsoft.com/technet/ShowPost.aspx?PostID=2409427&siteid=17

    Error message when you try to upgrade Windows Vista to a more advanced version of Windows Vista: "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.

    http://support.Microsoft.com/kb/946078/en-us

  • Could not find OR Device Drivers 2015

    http://www.NI.com/download/NI-device-drivers-August-2015/5568/en/

    Where is part 1 (DCD-Aug15 - 1_downloader.exe), part 2 (DCD - Aug15_2_downloader.exe) and part 3 (DCD-Aug15 - 3_downloader.exe)?

    Try a search.

Maybe you are looking for

  • L220x random black screen

    Hello! I have a serious problem with my L220x new and this forum is kind of my last idea to look for a solution. Maybe someone can help... Apparently randomly, I meet the following (from the office, the video games, full screen)... 1 several times pe

  • Everything works in "cascade", except that I can't access downstream WRT160N

    I have a BEFSX41 router as my main router.  A WRT160N V3 is cascade downstream to the LAN port LAN port.  That's all works very well with one exception.  I can't access the WRT160N configuration pages. I think that * its IP address is 192.168.1.2.  M

  • Professional installation window 2003

    By turning on my computer, am now get a pop window that says professional installer 2003 window, it tries to install it, but it does not work, so I then I have to ctrl/alt/del to meet pop window off the screen.  My computer was clean for a virus, not

  • Torent isn't valid bencoding

    everytime I open a window said torent isn't valid bencoding. All the icons are transformed into 'u' torent

  • HP Photosmart Premium C410

    I'm trying to locate a new driver for my HP Photosmart Premium C410. The list of options of the driver adds a character at the end. For example... HP Photosmart Premium C410a HP Photosmart Premium C410b HP Photosmart Premium C410c HP Photosmart Premi