Setup own question

Help!  I just reinstall Windows Vista Home Premium.  After that all programs and updates have been brought, the computer shows that the C drive and the dvd player.  There was a second disc with windows install files.  It has now disappeared.  Anyone know what I need to do to get it back?

Hi banditsbuddy

Was this disc on the computer when you bought it?

It looks like a recovery partition that has been installed by the computer manufacturer.

If this is the case, it is best to leave it alone, because this partition is the only way you have to the system in case of disaster recovery. You can consult the computer's documentation, computer manufacturers, most will provide instructions to create recovery disks for installation in this partition files, in which case the score is never lost.

Hope this helps

Ronnie Vernon MVP

Tags: Windows

Similar Questions

  • where can I find the creation of forum? and how to find my own questions in return?

    waar vind ik het first elements forum en hoe vind ik mijn eigen Internet questions back?

    where can I find the forum First of the elements? et How to find my own the questions asked back?

    Arkitsa wrote:

    Thank you 99jon, but it is always difficult to find your own questions return.

    Click on this:

    then this:

    and finally this:

    And your messages will be listed.

  • Setup blackBerry questions

    Hello

    I have two questions about how to install an application on the BlackBerry smartphone.

    I developed an application for blackberry that needs to load a configuration file to run it.
    1. I want to know how to copy the configuration file in the folder predetermined during installation of blackberry?
    2. my application has two independent applications, it is possible to group two applications into a single installer of Blackberry?

    Please help us with that?

    Thank you very much!

    Hai

    The installation process does not load anything on the micro SD card.  Instead, your application may check the file and if there are no upload it to a server.

  • HP ENVY m6 1158ca: Windows 8 Pro Setup own activation fails 0xC004C003 blocked by OEM product key

    My hard drive died on my HP ENVY m6 1158ca.  I replaced and ran 6 discs recovery I created for my daughter and

    After the last completed album, I hit continue to do construction and each time after several reboots (ready devices... Prepares... ... Software administrator is installed) it would get the BSOD - 0xc000000f - a required device is not connected or not available.  SO I format the disk of 1 TB and do Factory reset again, and it still fails in the same way.

    After failing on several occasions, I've used a Windows DVD Pro 8 for another HP laptop and Windows 8 coming!

    However, the activation of Windows 8 needs a key I guess that the BIOS it will not work.

    Call Microsoft by using the "activate Windows by phone" gave rise to the statement "you must call OEM.

    to get a key and then call us back and then we can help you"

    The HP ENVY is out of warranty, who do I contact to get this key on the BIOS?  or the BIOS button does not work

    because the Windows 8 Pro does not correspond to something?  The laptop came originally with Windows 8.

    Thanks in advance for any help,

    Marlene

    Hi @ml88,

    Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    The product key that is embedded in the BIOS may not work with the version of Windows 8 Pro.

    Here is a document HP-HP System Recovery troubleshooting (Windows 8) computers you can review. It can help restore the system from the recovery disks.

    If you need to get the recovery media:

    HP computers - get HP recovery disks or HP USB recovery disc

    Let me know how it goes.

    To say thank you, click on the "thumbs-up". Accept the post as a solution, if your problem solved, so that other people have the same problem can see it.

    Kind regards

  • Why does Win 7 not a forum for updating its own questions?

    Whenever I'm going to update in the Windows 7 forum, he sends me the Forum to update Vista.

    Windows Update forum is shared between all operating systems, Windows XP, Vista and Windows 7 are all together.

    It is because the problems in Windows Update (similar to the game) tend to be OS-neutral, which means that errors in Windows Update tend to expand on all operating systems and are generally not specific BONES.

    Thank you! If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

  • How to get the link to my own question, I asked before!

    I asked 2 days before, but I m not getting issue is not its link and respond accordingly. How do I find that?

    ETA

    Click on your username in the upper right.  You will see three threads.  This is called your profile page.

    You can also click here

  • Setup Distiller question

    Hi all, thank you very much for your help in advance,

    What (s) install Acrobat includes Distiller?

    Acrobat Pro DC.

    Acrobat Standard DC (less than function).

    For personal use (control folder is not to share): various products required to share.

  • My OWN question of film of mouse pointer

    Hi ive made a mouse pointer to flash movie. When I rollover the butones I have on my film works.

    When I go into the film, it starts to drag, and it works perfectly.

    The only problems I have is that when people they come out the mouse out of my scene in the movie, I want that

    the mouse pointer to do not stay on the border at the bottom right and still left.

    When is out with the real pointer to full desseaper, because is in dosent look very nice stay there almost to the confines of my flash animation.

    I have a movie with 120width and 100height.

    so when his film louding works not apper my mouse I did, now I want to put the code in dessepear completely when I get out of film with the pointer over all the borders!...

    Paul

    Spain

    Mine works in the same way, but as exampole link you to seems to use location detection to start a tween that is being gradually disappear.  I say this because the distance from the edge where it stops and fades is different every time.  There very likely occur at a distance less than the actual width and height of the stage since it does not occur at the limit, always somewhere in front of him.

    So, you can use a condition to test if you want to change the alpha...

    Mouse.Hide ();

    pointer_mc.StartDrag (true);

    this.onMouseMove = function() {}
    If (_xmouse < 5="" ||="" _ymouse=""> < 5="" ||="" _xmouse=""> Stage.width - 5 | _ymouse > Stage.height - 5) {}
    pointer_mc._alpha = 0;
    } else {}
    pointer_mc._alpha = 100;
    }
    }

  • Question about the subscription renewal for vSphere lab Essentials home

    First post on the forum here.  My apologies if this isn't the right place for a question like this.

    I have a lab at home that I have set up using the "VMware vSphere 5 Kit Essentials" that I had bought on the VMware online store.  It was a pretty fun because it let me familiarize themselves with the technology that I use at work without the same consequences for the mistakes of the project.

    To be honest though, I have never much thought about support and subscriptions for it... Setup should really just have to learn and be the main server for my house projects.  The cost for me to buy the Kit of Essentials has been a little more than $500 a year ago, and it seems that my still currently active subscription (my account displays "subscription only" for the Essentials Kit) allows me to download the latest patches and maybe even upgrade to a new major version in the future.  I would like to continue the subscription, as this seems to be more profitable that leave on the subscription and then renew... compared to the initial $ 500, a one or three year renewal looks pretty good - and I'd get to continue to be on the latest versions of the vSphere Essentials.

    I thought it would be as simple as clicking on renew somewhere on my account, but that begins to not look like an option.  I think that I am driven to get in touch with a business partner for the subscription renewals (is this sounding right?).  This seems a bit much for me for a small laboratory at home like mine.  Is the only way to renew a subscription via a partner company?  If I'm completely off track here, please let me know.  If I'm here, does anyone know (or recommend) a partner company that manages small renewals as mine would be?

    Maybe I'm hesitant for nothing, but I thought I would ask those who understand the subscription and support better than me.

    Thank you very much for the help!

    Dan

    To answer my own question, I discovered that for users with contracts less than $3,000... is it possible to make a renewal online without the need to go through a partner.  It turns out that the link to the online renewal page is available through the 60, 30, 15 days notice in advance of the emails that are sent to the holder of the account (which is how I found it).  The page renewal me related to this FAQ PDF that I found useful.  I was able to successfully renew my subscription from the link.

    http://www.VMware.com/files/PDF/myvmware/VMware-online-renewals-FAQs-en.PDF

    The important bits for me were the following (from the FAQ):

    ====

    Q: clients access renewals online from VMware.com or My VMware?

    A: access to the online renewal platform is by a "direct link" sent to clients through the electronic communication of renewal.

    Q: when VMware will send me the link of renewal online?

    R: the link for customers to renew online will appear on reminders e-mail sent 60-30-15 days prior to the expiration of the contract.

    Q: can customers renew all contracts renewal online?

    A: customers will be able to renew those contracts to a total value of less than $3,000 USD only. Customers will have the option of

    move to a higher level of service, or a longer term, as you wish.

    ====

    Hope that helps future lab home amateurs like me.

    Dan

  • Patrician Fusion reader question: MBP2015

    State of play

    In fact, for assistance from apple, but it seems that this form can be connected to a forum, I do not often use apple support.

    Due to an accident with a patrician resizing process, it seems that the matching of hybrid car has been made

    I just tried directions returned to the https://support.apple.com/en-ie/HT202574, the mode of recovery Via Internet > disk utility > repair disk the disk appear in red with the name of the entire virtual disk, underneath it is an icon named disk0 in black and indented below it is an OS X based system in black icon. By selecting all of the virtual disk in red and then repair disk an ALERT says

    After the line titled disk1s2: search Volume headers the following lines are in red

    After what lines starting with the header for invalid volume or invalid Disk Label is read.

    The last line in bold red States,

    Error: This disc needs to be repaired. Click the repair disk, resulting in a never ending cycle

    the statement is included in the log above from the ERD

    The volume Recovery HD seems to be OK. (in green)

    SO THE NEXT STEP seems via terminal

    diskutil list provides useful data

    through terminals diskutil list describes the disk mount points 0, S1, S2 and disc 1 + s1 to s3

    the remaining disk 9 DIS3 list only a mount point. the cursor stops at/dev/disk10

    However I am unclear what should look like the result

    I think I need to move a copy of the recovery of a USB tool before watching

    The following relevant instruction set seems to be

    http://www.TechRepublic.com/article/Pro-Tip-how-to-create-and-disable-a-fusion-d shore.

    But if apple has a script that I can download and add on a usb key with the wizard recovery tool that would save a lot of time.

    I hate the idea of returning the laptop for a repair centre because of a command line command, data it is not a problem here, nor the hardware has been damaged.

    As I see, below, its likely that this form of e-mail does not support Apple, but a forum, so I removed the mention of the serial number of the machine.

    TO answer my own question:
    Problem solved through the procedure described under restore fusion drive

    Via Safari in recovery mode the command-line coded suggested fortunately resolved my hard drive and now is operating system, reinstallation,

    Concerning

    Colm

  • How can I delete my question?

    The question on support.mozilla.org can in just edited.

    Only Assistant Deputy Ministers or moderators can delete and modify own questions and other employees

  • Questions of Orbi and protect the nests.

    I use Orbi for a few weeks and so far no problem. Until today, when I realized my nest protection (fire alarm) is not connected to the network.
    I did a full reset on the nest, I could see the network 'nest' on my list of wifi on my iPhone, but it expires then said I have no network at home. And I do. Given that everything else works.
    Technical support nest is quite usuless. They will tell me just that Orbi isn't on the list not supported. (Because they don't know what it is).
    Any ideas?
    PS: I am connected through Fios.

    I'll answer my own question, as I understand the problem.

    For some reason, nest the deletion of your account and resseting it does not work. It will not be conn ct to Orbi. But a factory reset did the trick.

    To do a factory reset on nest protect so it does not work with Orbi, just hold the home button until it turns blue. Continue to hold until the NEST begins to tell you it's serial number. Release the button before nest is done reading. You will be asked to redo a complete set, and with the large network of Orbi, it worked like a charm.

  • I just got a connection... specifically for Internet Radio. The question please...

    Well, there firmware 1.01.27236r and internet radio works fine.  I am aware of the limits of the microSD card and the fact that it has no video.  I agree with that.  My question is: if I run the recovery tool such that published in this forum and the upgrade, the connection will be able to connect to a WiFi network that is not broadcasting the SSID?

    Thank you

    Well, I'll answer my own question.  I have developed an attitude of "just do it" pending a response.

    YES.  Update the firmware to the latest version of WiFi allows to SEE and to connect to hidden networks.

    I guess that all of you here already knew it, and I thought that this was the case, but I wanted to just answer.

    P.S. the update of the firmware was super simple by following all the instructions posted here.  Thank you!

  • Windows Setup does not properly

    I have a unique problem with Windows® install. V 4.5.6002.18005 on windows vista ultimate sp2, the box that tells you this that orders and other information for the installer just appear if you want to see the box simply type "msiexec/Quiet" in a run dialog box and you'll see what I mean, but I get this box each and every time that an .msi file runs and tries to install. Help, please

    Note that I can't do a restore point because there are not. and I can't format and reinstall vista, I lost a few cds and do not have the money to replace the software that is currently on my system.

    Hi Seree1,

    It seems that your problem is similar, but differs from the original question. Please start your own question and provide the details of your problem so that we can help you.

    http://social.answers.Microsoft.com/forums/en-us/VistaInstall/threads

    Thank you.

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Envy 17: Questions about New 17 "computers laptops Envy with 6th Gen Skylake processors

    I see the new Skylake i7 CPU showed in the line of envy (I waited for my purchase), but he has very little information provided on the HP site and what's next is some confussion. I mean, I'm looking at a $2,000 laptop - a little information on the sales page would be nice!

    There are 2 17 '' want options (not the best value) that are customizable - display a touch and the other not.

    No touch lists a 256GB SSD option, and 1 TB spinner - touch lists a SSD 512 GB or double spinners.

    Basically, I can assume there are 2-Bay 2.5 "as previous models of envy, but what is the SSD? It is a 2.5 "SATA? What is M2? Is - this mSATA? If it's M2 or mSATA is on the lower part of the Board of Directors and easily replaceable?

    Which in the end line want is a bunch of fo SSD 512 GB (or 1 TB) and a cone of 1 TB for storage and available configs don't happen. Can I do it myself?

    Well, I guess I answered my own question...

    (manual for the 2015 Envy 17 is located @ http://h10032.www1.hp.com/ctg/Manual/c04696907)

    The manual shows a connection for the SSD with two m2 2 2.5 "bays. For those who wish to have a second (or third) car related parts appear to be:

    Hard drive cable 813795-001 (not shown)

    Kit (not shown) hardware hard drive 813796-001

Maybe you are looking for

  • Downloaded and installed FF 36.0.3 but there are no release notes so is this a legitimate installation?

    So I made the last update to FF (36.0.3) warned. Then I went to take a look at the release notes in https://www.mozilla.org/en-US/firefox/releases/ for 36.0.3 but there is none. It was therefore a release legitimate without documentation or I just ge

  • Qosmio X 300 - power management does not work properly in Windows XP

    Hello I have a Qosmio X 300 with dual boot OS Windows Vista and Windows XP Pro. When I work under Windows XP and AC power is connected, the laptop to show me the icon of the battery (100% full) and brightness reduce (kind of like when a laptop works

  • Fresh paint

    looking for Help file relative to the "fresh paint" - I am using the mouse and keyboard - do not touch tablet. or My tablet is android it's touch - is a fresh paint for android 4.3 (I think) available - when? Thank you Til

  • /oaam_server/oamLoginPage.jsp 404

    Hi allENV: OAM 11rR2Ps3I did advanced with OAAM integration and when accessing protected URLS I'm getting 404 on oaam_server/oamLoginPage.jsp? osso_spToken =I don't see newspapers as well. wget on the URL also returns 404Anyone have any idea what cou

  • Boxes hosted Eloqua form of fill?

    I created a simple that has 2 boxes on it (hosted in Eloqua). When I select the check boxes and click on submit I get an email that brings back me to the form. The boxes are not pre-load.But if I check the source, that the values are 'on' if I checke