Several Airport Apple ID devices disappear shared devices and Software Configuration of the airport

We have three Airport extreme and two Airport Express devices in two offices in the city.  Some time in the last two days, they all stopped appearing in the sidebar of Finder 'Shared' category (if they had attached disk storage) and they stopped from appearing in the Configuration software of the airport on any of the Mac on these networks. (They always seem to be correct, routing traffic, however).

For a while, we left a desktop completely alone as a control group and did all our testing and troubleshooting in the other office.

We-hard reset (to the factory configuration) all devices from the airport to an office. They began to appear again. Then we started to re - configure them again.  At the time wherever we had updated the devices they had disappeared again.

So, another factory discount based configutations for each device to this facility. Then we added slowly in pieces of their configuration.  When airports have received Apple ID and associated passwords for associating with iCloud/BackToMyMac/WideAreaBonjour (depending on what you want to call it), the airport devices disappeared from the airport Setup.

If we tried to configure another device from the airport to extend a network of 'invisible' airports, the new airports were "unable to find" one of these networks to expand.

If we reset all devices without providing them with Apple ID and passwords, they worked mainly as you would expect. The main difference being now do not appear as having been recorded as BackToMyMac/WideAreaBonjour devices.

One side for people dealing with this note: If your router are invisible, but they are configured to be configured from the EXTENSIVE worldwide network, you can use "File-> configure the other" and specify the address WAN of the missing aircraft and get this screen access as one would generally. From here, remove all the Apple ID associated with these devices, press "Refresh" to save the settings and they seem to reappear magically in the Configuration of the airport software.

In that State, storage seems to be available, but only for devices in Domain Local (direct connection). Airports without AppleIDs will not appear in the field to iCloud/BackToMyMac/WideAreaBonjour, and it's as expected, given that these IDS is the means for the identification of their field.

If someone else has noted these behaviors and if so, have an idea about specifically when they first appeared? Is there by any chance someone who knows of any change in registration or the MWAC of multiplication?

Did you approach the problem exactly as I did in the past, and having encountered problems of the CCMM literally every version of OS X. They were all distinct problems with individual characteristics, and in some cases the solutions exist. Having said that the CCMM has been completely reliable recently - which means running the most recent El Capitan release on all my Macs. The initial versions (i.e. OS X 10.11 to 10.11.3 maybe) didn't work at all. I don't know which version fixed whatever the problem was, I am sure he has not worked for someone else.

The same real place with Yosemite and previous versions as well. CCMM did not reliable until the exit "point three or four."

Through these experiments, I believe it should be a pretty fast connection. If the connection between a Mac and all the others does not meet this requirement (whatever that is) all you will be able to determine, it's that the CCMM fails.

Apple is characteristically silent about the technical aspects of the CCMM, probably because of security concerns. Nobody outside Apple knows how it works. If you're still having problems, I encourage you to contact them. After mentioning predictable you corrective raw materials (the two following links) you will be put in touch with someone who will look to what is false, providing diagnostic assistance and send your information to engineering. If it's something they should fix, you'll know not to the point of an OS X update is published.

Set up and use Back to My Mac - Apple Support

Get help using Back to My Mac - Apple Support

With all the conversations I had with Apple on this topic (which were many, involving a large amount of tests) not once they disclose any causal factors individual, other than to reiterate the need to run the last OS X, versions and the latest versions of firmware for their routers. In your case, that means probably that your Mac update to El Capitan. It is after all the very first recommendation in their document of support above, until you do this you will still not get in step 1.

Tags: Wireless

Similar Questions

  • BlackBerry Smartphones what the purpose and the difference between Blackberry devices and software updates to the Blackberry Manager?

    I got my new Blackberry Curve 8330 3 weeks red and I installed the BB Desktop Manager that comes with the CD called Blackberry user tools.   Now when I click on "updates" on the lower part of the Desktop Manager, a popup window with all sorts of information that I don't know where to go first.  My version of the op is a 4.3.0 xxx what is desktop software for? Is this software integrated with the Desktop Manager, or is it a separate thing?

    Hope to hear from you beautiful peeople soon to explain this for me!

    Not necessarily. I'm a tech person, so I'd rather have the latest greatest version of ang of the software I use. So if you are happy with 4.3 and it is not crashing or causing errors so feel free to continue using it.

    You can always try 4.7 and if you don't like it uninstall and reinstall 4.3

  • I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

    I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete." I tried to reinstall the driver when the computer prompted me to do it, but there was an error with this as well. My computer will not all read the disks.

    Original title: Matshita DVD-R UJ 890

    Hi AJordanMiller,

    Try these methods.

    Method 1

    Run the fix - it from the link below.

    Hardware devices not detected or does not
    http://support.Microsoft.com/GP/hardware_device_problems

    Method 2

    See the help article:

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/314060

    Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    It will be useful.

  • Error message: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete" and DVD disc is not recognized.

    Original title: My DVD drive is not recognized, it works physicaly works fine, but the pc does not even detect it exists.

    The error that says: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

    I did a backup and restored my system to the factory settings. After doing this still dvd was not recognized. I don't know what to do, my computer is new and Security told me that they will restore the pc and try to fix it, I can't risk my documents of the University are the same that has not worked for me before.
    Could someone help me?
    -The pilot is the last in line.
    -The works of reader dvd but the computer is not reading it, it does not even appear on the section 'computer '.
    -J' tried to use a "fix - it" on Microsoft online, but it doesn't work anymore.
    -My OS is Windows 7.
    -A restore factory settings did not work at all.
    Thank you.
    Claudio Nahmad
    Mexico City

    Hi, Claudio Nahmad,.

    This error can occur if the data in the registry for the device and its driver has been corrupted.

    Since you have already done a factory restore, leave, try to uninstall and reinstall the driver CD\DVD and check if it helps.
    Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

    We can also refer to article and check if it helps.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    Important: The above links contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    For more information, you can view the article:

    Back up the registry

    You can also try to install Windows updates, including optional updates driver and check if that helps.

    Install Windows updates in Windows 7

    Hope the helps of information.

  • Error: This page cannot be displayed - the remote device and does not accept the connection. (! found)

    * Original title: this page cannot be display the remote or unit does not accept the connection. (! found)

    My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web page of schools, I can access my e-mail from the school, but I can't get the e-portfolio page. It says cannot display this page - the remote device and does not accept the connection - (! found). He said to ensure that the TSL and SSL in the advanced internet options security part turned on who they are, my better protected as well the mode. I've never had a problem accessing this page before. It is only this page! Help!

    Hello Teresa,.

    The probable cause of this problem could be due to wrong settings for internet explore.

    Please see the link below, Windows 8, follow the steps to check the Proxy and DNS settings
    http://support.Microsoft.com/kb/956196/en-us

    Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    Hope this helps, please answer with the results for assistance.

  • Permit refused: physical location, really you have to "re - serialize this device and add it to the full pool"?

    I am a teacher and have an Adobe CC license through my school, which is located in Valencia, Spain. However, the school year ends July 15 and I am now in the United States and will be until I return to teach next January.

    My Adobe products worked fine until a few days ago when I tried to open an Adobe application and I received the following message:

    License denied

    There is no license associated with this device.

    The license for creative cloud on this device was refused.

    Please contact administrator for re - serialize this device and add it to the full pool.

    Screen Shot 2016-07-27 at 12.22.28 PM.png

    I contacted my admin, and he said that I (or my computer) had to be physically at Valencia in order to re - authorize the device. (I have an Adobe ID, but a different Adobe ID of the school of the Department's it was used to install CC.) Because I won't be back in Valencia for 6 months, and I need to use the software now, it is a major problem.

    I hope that there is a way to do this remotely (it is 2016, after all) that my admin does not know, or did not bother to understand.

    Is it possible to "re - serialize this device" remotely?

    Thank you

    Jon

    > Different Adobe ID of the school of THIS Department was used to install CC

    Who could tell me that YOU do not have the subscription, it is up to your school when then means that YOU can not renew the subscription with your ID and your current place of residence

    The only option I see is to buy your own subscription... using the monthly option rather than the annual with monthly payments option since you won't need a personal subscription for one year plans membership FAQ: what is the difference between an annual and monthly plan?

    Or, as it is an open forum, not Adobe support... Click below to contact Adobe staff for help

    While the forums are open 24/7 you can't contact Adobe support at any time

    Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    Don't forget to stay signed with your Adobe ID before accessing the link below

    Creative cloud support (all creative cloud customer service problems)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  • I have several versions of InDesign 6 on different MACs and need to get the serial numbers for them. How can I get them?

    I have several versions of InDesign 6 on different MACs and need to get the serial numbers for them. How can I get them?

    If they were recorded at Adobe.com, sign in under the adobe ID, a number will be there.

    If they were purchased in the box and unregistered, you need to find the number in the box (usually on the sleeve)

  • For days now, my iPad Air insisted on the fact that it cannot connect to iTunes. Wifi works fine for applications and devices, and I tried all the options on the support page. Nothing has worked. What should I do?

    The time zone is correct, it is signed through "iCloud" in the settings and all the apps work relatively well, including those who are in need of the internet, so the problem is not the internet. However, the Air iPad is more connect to iTunes, it is impossible to update anything. It won't let me reconnect through 'iTunes and App Store' in settings, just tell me that it can't connect to iTunes everytime I try it. I also noticed that Game Center is strange, his page in settings will not be same load and he often delay signing in when I open an application compatible with it. My iOS is updated to 9.3.1. The only thing I can think is that I had to change my password recently, but he had me to login with the new password on the device, and this problem did not show up a few days later. I am at a loss on what to do at this point, and I already tried all suggested fixes Apple support. Are there patches less known who could solve this problem? Or, is this a widespread problem that apple is having this time with their servers?

    Hi TimeSeerStudios

    I don't see the failure:

    https://www.Apple.com/support/SystemStatus/

    Have you tried to close all applications and restart force (hold down the sleep/wake and Home buttons and do not let go until the screen darkens and the Apple logo appears)?

  • How to turn on Lenovo PM device and adapter Modem on the X 201.

    I get this message when you try to activate it:

    Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

    I get this error message for both devices and have all two yellow triangles in the Device Manager.

    It started with the loss of all sounds. Search problems and saw these two and have no idea if there is a link or not.

    Thank you

    Hello

    Reinstall the the site of Lenovo power management driver.

  • Yellow brand - PCI Device' and 'Network controller' on the Satellite A100-787

    There is a yellow question mark in Device Manager for a pilot called "PCI Device" and also for "Network controller" even if the network (LAN) connection is working well and all the other computer functions seem to work well.

    What are these devices?

    The second device appears to be a LAN or WLan card. You should check if one of these cards were not installed under network adapters.
    The PCI device can be a card reader. Check this box too.

    But I really don't understand why these yellow exclamation points appear in Device Manager. I assume that you have installed all the drivers available. Did you?
    Please check if some drivers were not installed.
    If so, then download and install!

  • BlackBerrry devices and its upgrade of the OS

    Hey guys, I want blackberry devices, and what OS coulld be upgraded, can see get from OS 4.3 devices

    Concerning

    Rakesh Shankar.P

    I usually check the crackberry forums, they have the latest (official) OS versions for each listed device.

    don't know about a compilation, there was a-going to the blackberryforums, but it is discontinued I think

  • Sharing files and printing turn off the coast

    I have a thinkpad SL510 with Win Pro installed and for some reason, the file and print sharing checkbox for the Ethernet card turns off after that I have restart or restart the computer... What you have to do to prevent this?

    Thanks Andy... in fact I found this response during a search in an another forem to Lenovo for the T60... but I appreciate it... This has been really puzzled for a while now, since I didn't know that this option was in the login to... but so far seems to have done the trick.

  • BlackBerry smartphones HELP! put the device and software to factory settings

    Hi all

    I need assistance with my camera, I'm currently using now 8900 Curve and my cousin about to buy it, but I want to back to factory settings. I exactly want to remove my "[email protected]" of my camera or any record in the software and the device. Just make it back to factory settings with no information that I put in my topic. How can I do?

    Thank you

    Andra

    Hi and welcome to the Forums!

    A few things you need to do:

    KB05099 Steps to take before selling it, or after buying a used BlackBerry smartphone

    You need to talk to your operator so that not only the account of the BIS are removed, but also that they remove completely the existence of the @bb e-mail account.

    Best!

  • I cannot see the devices and can not import the ringtone

    I am trying to send a song from my library, iTunes to my iPhone 6.  I'm running the Mavericks.

    If your 6s iPhone running on iOS 9, you will probably need to upgrade iTunes to version 12.4.

    Otherwise, we provide more detailed information on what exactly is the problem.

  • I'm trying to re - install my for windows vista 32 bit synaptics pointing device, but my device manager does not display any device and keeps bring up the keyboard to the screen as how to fix this?

    I tried to install a driver for it but I find only 64 and 86 bit drivers. Sometimes my keyboard is not typing all letters I am getting tye (type) or like this for example. Someone at - it help me fix this please. I really want to get this computer working again.

    Your keyboard might not be hitting the correct letters (typing lertters numbers) because your shift caps lock is enabled (the led is green), to disable it on a portable computer, press on the 'fn + caps lk' keys at the same time, the green light should turn off.

    Your system is 32-bit if you need marked x 86 driver (it's actually 32-bit, there is no system of 86 bit).

    For you On - Screen Keyboard, check if it is automatically configured to start whenever you open a session:

    Go to the Control Panel, easy access, less "explore all settings', click on 'Use the computer without a mouse or keyboard', click on the box in front of"Use on-screen Keyboard"to uncheck if its active.

Maybe you are looking for