Several AP 1142 suddenly lose SSID

Similar Questions

• 22 Firefox the box next to my emails to delete several emails disappeared suddenly. It works with Safari. I don't know what happened!

  My E-mail Yahoo page has suddenly lost the check box beside the mails to remove multiples or do any other action in multiples. I can't find a way to recover. I have Firefox 22. email yahoo works fine on Safari.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Laptop suddenly loses the wireless out of sleep mode

  I have a HP Pavilion g7 laptop running Windows 7 Home Premium 64-bit.

  Last month, it was the loss of connection Wi - Fi & will not return to the top of the standby mode. When I open the screen, the "enlightened" shows power button but the screen remains black and wireless orange shows (f12) instead of the blue button. I can hard down and restart in safe mode to get the screen to the top. So, I have to restart the computer several times to get the wireless to turn back. By pressing the f12 key has nothing to do with it. I have a HP desktop which is perfectly fine - no problems at all.

  Nothing has changed regarding the new routers, software or anything like that.

  Welcome to the forum, TM_Cali,

  Consider / try the following:

  WiFi disconnects after sleep - Wifi doesn't wake up

  IF you use no SHARING, try:

  Windows key + X > P (opens the control panel) > icons > network and sharing Center >

  Change the adapter settings > right click on your connection > properties >

  Scroll down in the Networking tab > uncheck the IPv6 BOX > OK

  OR - a better solution:
  

  Windows 8:

  Windows key + X > M (opens Device Manager) >

  Windows 7:

  Control Panel > display icon value > Device Manager >

  Next...

  Network adapters >

  Right-click your wireless adapter > Properties > Power Management >

  Select as appropriate:

  Clear the check BOX "Allow the computer to turn off this device...". »
  CHECK 'Allow this device out computer' >

  Ok

  Bluetooth:
  

  Windows key + X > M (opens Device Manager) > Bluetooth >

  Right click of your Bluetooth adapter > Properties > Power Management >

  Select as appropriate:

  Clear the check BOX "Allow the computer to turn off this device...". »
  Ok

  ======================================================================================
  

  For laptops:

  Pay attention to the warning to leave the device connected wireless and battery operated.  The device consumes little power; However, if you run your battery is very low, it could have an impact.

• Web page on my site suddenly loses images and links

  Hello:

  I have maintained my website (the writings of Gerald Lee Gibson) for a long time, and suddenly one of the web pages presenting my novels (Prelude to Dawn) lost the cover photo and the photo of myself.  He also lost the link back Den writer (my home page).  Everything else is fine.  In fact the rest of my site works fine; It is only these problems on this page.  The link to my site is http://geraldgibson.com/.   Page (prelude to the dawn [index10.htm]) looks normal when I upgrade my browser inside Dreamweaver.  Is - this caused by google, or is there another reason why this anomaly exists?  I tried everything I could think of to fix this problem. It doesn't seem to be a logical reason for it to happen!

  -Gerald Lee Gibson

  Point taken.  Thanks for your input, bur, I've corrected the error.  Sort the folder inside the root folder was empty.  I moved the missing files to the root where they belonged and presto! -the part of my site by mistake came in google.  I'm curious to know how it happened.  I have viruses and mail protection ware, but is it a good program for the protection of the sites against hackers?  Ever once in a while I get Chinese written inside Dreamweaver.  It doesn't seem to affect my site a lot.  A thinking about it?

  Thanks, G.L.Gibson

• Airport Extreme intermittently lose network signal

  For several days, I repeatedly lose my network signal.  I spent an excessive amount of time troubleshooting including going so far as to have a comcast tech come by today, but it's a bit like going to the doctor... When the doctor walks in the room, all of a sudden all the symptoms disappear.  Anyway, has dropped signal, network cannot be found, restart the modem and the router on a regular basis.  some time, restart allows the devices to the network.  Sometimes it doesn't.  And when that happens, it is not compliant and will lower it again anywhere from immediately or several hours later.  Comcast claims signal input in an apartment is good as well as the modem is good.  They think it is my Apple Extreme router.  However, the same missing network behavior occurred even when I bypassed the router and used a direct connection to the modem via ethernet.  For example, if the signal coming from the wall is good and the modem is good but I have the same problems even if without going through the airport, what happens?  Hope that someone out there more knowledgeable and patient I can sort this out.  I am happy to buy new hardware but want to be sure, that I need.  Comcast, recommended, of course, I get a new modem.  Motorola, of course, said that there is nothing wrong with the modem.  So now, I go to the Apple people to evaluate the remaining product that is Apple.  Thank you.

  However, the same missing network behavior occurred even when I bypassed the router and used a direct connection to the modem via ethernet.

  Is your modem or ISP...

  The problem occurs intermittently... the curse of living in any repair technician. If they can see what is happening, then they can work on that.

  You have no choice but to continue to pursue to the ISP.

  For now use mac plugged directly on the modem... and as soon as he left the ring and say that it does not work now.

  This modem do you have?

  Certainly, we have experienced problems with the Modem Motorola... SB6141 is the top of the list.

  The problem with the airport is well known... but I would have thought that the live Mac should be ok...

  In any case a new modem is not expensive and worth it.

  The zoom seems the best solution... check that it is on the list of comcast.

  Zoom modem.

  https://discussions.Apple.com/thread/7360161

  https://discussions.Apple.com/thread/7427491

• Firefox suddenly some wmode transparent lines. Instead, view the contents of my white instead of transparent. Help.

  Please help solve my problem of flash! The menu has always worked perfectly for several years. Suddenly, it works yesterday.

  The DOM Inspector shows that the menu has wmode = "opaque" in the EMBED for Firefox.

  It seems that there is a running script that modifies wmode = "transparent" wmode = "opaque" to the EMBED tags (OBJECT still has wmode = "transparent").

• Active window loses focus

  All past this problem recently. It began not with an upgrade of the OS, if I had just restarted the computer after having been passed away on a trip.

  The active window, I have been working in suddenly loses focus, sometimes in the middle of a Word, I care. A moment I am typing away and all goes well and the next moment every keystroke causes a "thunk" sound effect and I look for my strikes were not registered and the three tasks in the upper left corner color (buttons close, reduce and fullscreen) are grayed out. I do a mouse click in the window to make it active again, and all is well for a while until that happens some time later.

  OS X 10.11.3

  iMac, retina 4K, 21.5 inches, end of 2015

  When you find the problem, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Satellite A200 - loses the battery, switch off the power

  I have a relatively old Satellite A200, yet almost all inside is new except the battery. The battery has a very short life, but that's because its old. Recently the computer started to suddenly lose the battery, so the charge light stays on, the battery light turns off and the battery icon said "plugged in, not charging." However, the computer still work on battery power. If I see it at the time, then by removing and replacing the charger repeatedly, I can start it load again, but if I am not it switches off without warning. Since the battery life is now less than a minute which often.

  I don't think that the problem is with the charger because it always shows the charger is plugged in, and when the computer is off the battery light is always on when it is plugged. I had a problem with the power connector, but if the motherboard was recently replaced so I don't think that's it either.

  If someone could help it would save me a lot of frustration, thank you.

  Hello

  At first, I must say that you should not be frustrated. Problems with consumer products are normal, and each of us has problems with laptops, televisions or other electronic product.

  Let's see what you can do about it.
  Your description is OK, but what I want to know is follow:
  When you remove the battery can work on your laptop with no problems (start work, cut)?

  I also think that the battery is too old and I presume it's troublemaker in the history. It is not easy to explain what behavior flashing if you have a defective hardware or old coin inside.

  Maybe, you need to buy the replacement of the battery and check the features for laptop and the battery, just to see if everything will be OK again. If you will be faced with the same problem again then we can discuss what may be the problem.
  In my opinion only a reason for this could be electronic power supply.

  What do you think?

• HP Laserjet P1102w: printer suddenly responds slowly

  I've been running this printer on this iMac for several years.  Suddenly he delayed several minutes before responding to a print command.  He still expects between printing each page.

  What could be the cause of this problem suddenly?

  Mary Lou

  Hi @mloufrost,

  Welcome to the Forums of HP's Support. I understand that your printer has developed a speed. I would like to help.

  When the printer is on, unplug the power cord. Wait at least 30 seconds and reconnect the printer power cord.

  Try printing a configuration page. If the page prints in less than a minute, the problem is most likely software or network. If it takes more than a minute, it is probably a hardware problem.

  The configuration page lists the properties and the current product settings. It also contains a report of the State newspaper. To print a configuration page, do the following:

  On the Control Panel, press in and hold the Cancel button until the light starts flashing and then release the button.

  Please let me know the speed of the configuration report to print.

  It also wouldn't hurt to align the printer

• DVD + R discs lose all content (photos) - how to find them?

  My laptop with Windows 7 has several times made me lose all my files on my DVD + R discs.  I don't know if I do something wrong when inserting the disk (incorrect formatting?) or something else when you remove the disc?  I lost important files on disks too many times.  Previously Microsoft docs, etc.  Now I've lost hundreds of photos on a DVD + R.  When I insert the disc, the disc name is not recognized and it said drag files in this folder to add to the disc.  But where they went or where they permanently deleted?  Can anyone provide an overview?  THX.

  Hello

  It is always best to save the file to a folder on your hard disk, then copy the file to the removable drive.  Save the file on the media may result in corruption of the document.

  Try using Recuva (free version) from Piriform to recover the files.

  http://www.Piriform.com/Recuva/download

• Multiple SSID may not be broadcast AP 1242

  Hello

  I tried to set up an AP 1242 Version 12.3 (8) JEA2 with 3 SSIDS, each SSID assigned to a VLAN, but I was not able to broadcast the SSID 3 at the same time. If I broadcast a single other is not available; several times the following message "SSID vlanX replace SSID vlanx.

  as the SSID broadcast.

  How can I solve this problem?

  concerning

  Try using this command under the dot11 ssid:

  MBSSID-guest mode

• Wireless adapter suddenly lost, disappeared from the Device Manager. How to prevent this?

  Hey :)

  Ive looked all over the internet, but still nothing quite similar to this...
  -Asus PC V551LB-CJ093H
  -Windows 8
  -Wireless network adapter: Intel Dual Band Wireless-N 7260
  The problem is: laptop suddenly loses wireless wireless adapter because suddenly friggin disappears from the Device Manager, as did not exist. Only the wired network adapter still works and all things Bluetooth. The only way to resurrect from the dead is to restart my laptop. But I don't like this solution X_x. How can I stop my laptop disconnect my wireless connection?
  What I've tried:
  Auto-updated the driver from Device Manager
  -' Find the hardware changes' on Device Manager
  -Disable "allow the computer to turn off this device to save power" the power of the device management
  The only thing that has worked now:
  -Restart the laptop.
  Thank you very much for your help :D

  Thanks a lot :) I've manually updated the drivers from the manufacturer's website (intel), and the problem ceased to occur. I will you update if anything... Thanks again.

• Remote panels - Situation of the Client crashes

  Hello

  I would like to ask if someone can help me with the following situation.

  I have an application that has several other dialog boxes live and a high level VI this app is accessible by a remote client via remote panels. The highest level VI (contains the menu - structure of loop and event) the customer selects what he wants to run. Then, the front of his choice opens on his computer. Everything works ok.

  However, if the client computer suddenly loses internet connectivity, then the runtime indicate a crash of the plugin in the browser.

  On server side, all open applications appear to freeze. I can disable them one by one and then stop everything and try again.

  Could someone let me know how to address this issue? I wish that the customer, in the case where an accident occurs, to be able to reconnect to the application.

  Thank you and have a nice day.

  Hello

  Thank you to attach screenshots.

  The reason why you get this error is that you try to close a connection that is already closed by the server. You can add a simple error handler after your block of proximity with the Client , who must take care of the pop-up. There is possibility to ignore this error (or other). This knowledge base article does a great job explaining how.

  Please let me know if that answers your question.

• Photosmart HP 6520: lost my photosmart 6520 by manually changing the server address

  Hello
  My printer is connected wireless and prints well by AirPrint and when I send it jobs by email, but after successfully scanning to e-mail several times it suddenly wouldn't connect to the Internet, which gives an error message. Tried to turn it works several times. Leva help on the forum and follow-up of boards to manually change the DNS server to 8.8.8.8 and 8.8.4.4 another server. This resulted in my losing access to my printer via his IP on my browser so I can't undo my actions and my printer always gives the error message when I ask him to scan to e-mail. All other functions work.
  Help, please. Thank you

  Hey @Kybosh,

  Welcome to the Forum from HP Support.

  I understand that you are having connectivity problems with your HP Photosmart e-all-in-one 6520, printer.  I want to help you with this.

  I'm surprised that a manual DNS has interfered with your setup - I think generally it does the opposite and enhances connectivity.  In any case, do not despair!   I have some suggestions that can restore the features of your printer.

  I recommend a fresh start by restoring the default settings of your printer to avoid any persistent configuration problem.  Here's how:

  • Front panel of the printer, press the key
  • Touch tools
  • Touch Restore Factory Defaults
  • * Note that this will reset your settings wireless and webservices.  If you have an address custom ePrint it is deleted permanently.  Click here for more information about setting up a custom address ePrint.

  With your restored default settings, continue on as indicated:

  • Touch the wireless icon ()
  • Run the Wireless Setup Wizard and reconnect to your network (SSID)
  • Enter the wireless password if prompted
  • Once you have created a wireless connectivity, reactivate your webservices/ePrint feature (essential for the use of scan to e-mail)
  • Tap the icon of webservices ()
  • Enable Web services and press OK to enable your printer will automatically update
  • Once completed, it will print a page of information.  If you are looking to complete an ePrint installation, it will be useful later - click here for more information.

  Now, if all goes well you can rebuild your Setup email scan:

  • Tap the scan icon
  • Tap the scan to E-mail
  • Enter your personal email address
  • Retrieve the PIN code of your Inbox
  • Enter the PIN on your requested to complete printer installation

  The above restore the functionality you were missing?

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below.

  Please post in the Forum of HP's Support and have a great day!

• Bluetooth mouse problems with windows 7 ultimate

  I have two laptops which, without reason, all of a sudden loses connectivity of bluetooth mouse, it just stopped working and then I have to reboot to get it working again.  Two of these computers also have a bluetooth keyboard that is not assigned, the mouse.  I don't find anything wrong with bluetooth and have tried several different mice with the same results.  Windows 7 ultimate on two laptops.  a laptop computer used to run vista ultimate with the same mouse windows and it never happened, it started with windows 7.

  Hello

  These used laptops are relatively very close where they can interfere with each other?

  Will there be electrical/electronic or other types of interference in the region?

  Check with the bluetooth device to the manufacturer for known issues and possible solutions

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Norton and other security/antivirus/antispyware programs are known to cause problems with
  BlueTooth/mouse devices.

  =================================================================

  It is extremely difficult to solve the intermittent problems.

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
  as expected when you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  ---------------------------------------------------------------------

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  ---------------------------------------------------------------------

  More information of possible interest to some: (not directly related to this issue)

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.