Several BSOD occurred, even for the selection 'Reply' to a Mozilla Thunderbird e-mail!

Similar Questions

• My CS5 Illustrator (just updated) guard smoking when I either try to re - create a link, scroll through fonts, use the pipette for the selection of the color of police/or save to a new folder outside of the previously used. Even when I choose to close, he

  My CS5 Illustrator (just updated) guard smoking when I either try to re - create a link, scroll through fonts, use the pipette for the selection of the color of police/or save to a new folder outside of the previously used. Even when I choose to close, he said that it "unexpected." Really irritating - ideas?

  Your options are:

  -try to make it work (could take a few hours and may does not always work)

  -get the CS6 (has problems as well, but works a little better)

  -get CC

  -install a virtual machine with an older system (10.6 or 10.8)

  -Check if your Mac is not as new as you think and you can still run Yosemite (also has problems, but perhaps not as much)

• PCL Code for the selection of the status bar

  We have a Unix-based program that relies on EZ for the selection of the printer spooler. Printing was allowed until we replaced the old printer with a HP 3005dn. We must make letterhead in tray 3. EZ print spooler requires to print PCL codes. I ran the code numbers range to print from the 3rd drawer.

  My problem is when it receives the print job, you have to hit the OK button twice so he can shoot from the 3rd drawer.

  By changing the PCL code, I can get him out tray 2 automatically, or stops for tray 3.

  I have modifed the installation of manual feeding system and or use requested tray do not help both.

  Here's the line of code in order

  PCLx_lowreceipt_ac_begin_ ^ [& l0o66f4H ^ [& s1C ^ [(s4099t0p12H_]]

  4 H is supposed to designate the selection of the status bar. I spent several hours from 1: 00 until 8: 00 successfully and to have the work automatically pull from tray 3.

  any ideas?

  Solution

  You need to access from the UI and not the control panel

  -IP in the laserprinter

  -Tab settings select

  -Set the camera (left side)

  -Develop "Configure Device" in the center of the page

  -Develop "Impression".

  -Develop 'PCL '.

  -at the bottom, "Mapping of media sources"... assign the Standard classic.

  Worked!

• BlackBerry smartphones can not change 'Sounds for the selected profile' or create new ones

  I can't change any of the other sounds in my profiles or create new profiles.  I can switch between them and change notifications as expected from fort to vibrate to silence.  When I select 'Sounds for the selected profile' I get a transition of the screen as he opens the new screen, but then disappears.  I tried to create a new one, but the new profile button and menu option do nothing.  I upgraded to 6.0.0.246 in hope, he could solve the problem, but it didn't.  Can I change the ringtone and sounds for contacts only.  When I arrived at the torch, I could change and I even created a new.  Any ideas?

  delete nimbuzz, berrybuzz or any other instant messaging applications, and then restart the device

• I have 12 EP on laptop that is now replaced by a new one.  He cannot find download for even for the new laptop.

  I have 12 EP on laptop that is now replaced by a new one.  He cannot find download for even for the new laptop.

  When I twirl open the PSE12 option I see English. When the download is complete, you usually select the language when starting the installation.

• How to make a good UI for the selection of the channels with DAQmx

  A lot of my Labview programming accompanied verisons them previous LabVIEW (pre Labview 7), and there are a ton of new features I am digesting (currently using Labview 8.2).

  My question is (in general), how people schedule their user interface for the selection of channels and others when using hardware DAQmx?  What I have in mind is a system compacDAQ with a number of modules.  The user would be able to choose which channels to watch.  With the help of MAX as part of this process seems counter intuative and somewhat static (yes I know you can change out there, but it feels more like something you would use for something that doesn't really change much).  I wish that all the UI within the VI.

  Programmers use the task of creating screw for this or something else?

  Thanks in advance.

  ChuckNRC,

  I tend to avoid using MAX and create all my channels/tasks using the DAQmx functions.  There are also having some DAQmx features that allow you to save/remove channels, tasks and scales to MAX.

• After update to the last version of the space bar no longer give me hand tool / to navigate around my image, everyone knows this? Even for the button on my wacom pen...

  After update to the last version of the space bar no longer give me hand tool / to navigate around my image, everyone knows this? Even for the button on my wacom pen...

  ... computer update restarted... everything seems to work again.

• Why omit Photoshop elements 14 for the selection of Color Variations in the color "adjust" knocked down? That was helpful. What do you suggest me to use in a place?

  Why omit Photoshop elements 14 for the selection of Color Variations in the color "adjust" knocked down? That was helpful. What do you suggest me to use in a place?

  If you have a copy of PES 11 or earlier version, you could install it and use it for this.

  You can apply here:

  Feature request/Bug Report Form

• I can't get my calculations right away, even after the selection "commit selected value immediately" on my drop-down menus. Any ideas?

  I can't get my calculations right away, even after the selection "commit selected value immediately" on my drop-down menus. Any ideas?

  The field calculation order is probably not set correctly. The specific configuration procedure it depends on which version of Acrobat you are using. Acrobat 11, you would go first in forms editing mode (Tools > forms > change), and then select:

  Tasks > other tasks > set field calculation order

• Is it possible to use a multicolored image (red tomato with green stem) as an indicator of reversal for the selection button to a DVD in encore

  Have 6 buttons and want to use a red tomato with a green stem to indicate that the button is set up over and selected?

  Short answer - no two long answers - Yes and Yes.

  Highlights can only be single color (two-bit indexed color) and your image is not.

  However, you can have up to 3 main points using different colors for each of them. Then change your image so that you overlay 3 different colors (layers in photoshop, = 1, = 2 and = 3). I would try probably the background layer as the red ball; then the white reflection, then the green on top. When the highlight is turned on, all the 3 colors show.

  The other method is to use autoactivate (a button) to access a different menu which changes the image in the background for this button.  You create multiple menus, with an ordinary State for all buttons in all the menus, with the exception of the different "Star" for the "selected" button MouseOver not autoactivate, so this does not work on a computer as you want.

• The MGP Apply mode / 'write' for the selected users?

  Is there a work around to implement the mode of MGP Apply / 'write' for the selected users? The reason is that we have registered who transact only the request online. In this case, they don't need to synchronize. Manually change the ALL_CLIENT$ CAN. OUTQUEUE_DIRTY to ' has only a temporary effect and would normally return to 'Y' after a user made another transaction online. Please advice.

  If you have users who just order updates, then why do need to be put in place in the mobile app? they still appear in synchronization history? If this isn't the case, then I suggest that you just drop them from the mobile server because they have no need for the application lite oracle, just access to the server application.

  Regarding updates to direct data to the tables of mobile repository then (although not recommended), normally they don't cause problems, but would bypass in some cases associated with the transformation.

  If you change the param_value in c$ all_subscription_parameters, then the new setting of subsetting to take effect. However, if you do the same action via mobile manager, it also triggers a reset (if used) customer zero, assignment of new values in sequence and re-evaluation of the list of items of publication associated with c$ all_client_items - these products of two change would be lost if you just update the data in the table

• Go for the summer. How can I stop all mail entering particularly undesirable!

  We will be at our cottage North of Wisconsin for the summer.  I want to stop all mail incoming (mostly useless) until September.  Is this possible?

  Optionally, you can contact your ISP and ask them if they can temporarily deactivate your account while you are gone. I've never done it myself, but it might be interesting to try to avoid having to go through hundreds, maybe thousands of meetings, extensions of the body part, malfunctions and other large email When you get back.

  SC Tom

• How can you save the background image contained in a Thunderbird e-mail message

  How can you save the background image contained in a Thunderbird e-mail message

  Have you read the instructions which preceded the right click? What of their suite?

• Width maximum and ORA-1445 for the selection of the field.

  Hello
  
  We recently had the ORA-01445 error in the database.
  
  A friend of mine directed me to the following address:
  http://www.ErrorHelp.com/search/details/65019/ora-01445
  
  And explained to me that Oracle takes all fields in all the tables in internal and external joins to build a HUGE table before choosing which fields are really needed for the query.
  
  I can't believe that Oracle made such stupid thing so I ran here for ask the experts.
  
  An example:
  
  Two tables:
  
  TABLE1:
  -----------
  Field1
  Field2
  ...
  Field100
  
  
  
  TABLE2
  ----------
  Field1
  Field2
  ...
  Field500
  
  
  Select table1.champ1, table2.champ1
  FROM table1
  INNER JOIN table2 on table1. Field2 = table2. Field2
  WHERE table1.champ3 = '1'
  
  
  ->
  It is:
  
  How the join is based on detail?
  
  
  If it generates an intermediate table with 100 + 500 = 600 fields to not get the 5 that are used in the query (table1.champ1, table2.champ1, table1. Field2, table2. Field2, table1.field3)?
  
  
  Thank you.
  Sincere greetings,

  864737 wrote:
  Hi John,.

  Maybe it's a complete nonsense, but even if has no instance of sense which way solved the issue.

  I have a request who suddenly cannot run with the described error, version 10.2.0.3 but it does not happens in 10.2.0.4. As a solution, we did it using Subselects and join as described in the post and the query reworked.
  If ORA-01445 is triggered even if this isn't the cause of the error. You have there a circumstance where it fits...

  So, it is clearly a bug introduced (possibly in 10.2.0.3) and fixed with 10.2.0.4.

  I can't post the query because of license restrictions but believe or not, this happens with Oracle. It is good to know that the number of tables fields is not serious. I was surprised to hear it. But your clarification was good. : D Tnx.

  It seems that our DBA found that this behavior can be corrected by an official patch.

  Which clearly indicates a bug, just be sure that the patch is really good.

  Thanks again for your response.

  There are a number of bugs in MOS around ansi joins this error, bug
  4369235.8 ORA-1445 may occur for queries to ANSI join with great views/subqueries

  seems possiblefor your case. However, workaround for this was to not use ansi style joins, once again, the number of columns is not directly the cause of the error.

  John

• Lot of automation - need to remove "choose" pop-up window for the selection of the folder of automation

  Am new to scripting and am creating a batch script automate .idml CS5 to CS4 .inx. I found that a few there close enough scripts that I can edit, but they all include the same variable to select the folder for the files to be processed. Even when I put the ("//server/directorypath/folder") in place, it nevertheless opens the popup to "choose" the folder I just told him to go. Ultimately what I need is a place people can put their files of .idml on the network and, thanks to a record of action run the script from a machine dedicated with CS4, spit the .inx they need. I understood how to turn indd dialogue/alerts on and outside, but not this one!

  How can I make the "var = myFolder" be a fixed location? Everything I try seems to create an exception later in the script

  myFolder var is Folder.selectDialog ("select a folder with the InDesign files open");.
  If (myFolder == null) exit();
  var myFilelist = [];
  var myAllFilesList = myFolder.getFiles ();

  Please paste the scripts in the Advanced Editor and use > syntax Highighting > Java.

  Perhaps your problem is that you are using the wrong syntax for your path to the file. Try to change the original script and adding script:

  var myFolder = Folder.selectDialog("Select a folder with InDesign files to resave");
  alert("Set myFolder to "+myFolder.fsName);
  

  and then to see exactly how the name of the folder is given and try using them.