Several clients connected to LocalConnectionServer

Similar Questions

• How can I control the number of clients connecting to one or more access points?

  Hi guys,.

  I am using several access points LWAPP/CAPWAP (1010, 1131, 1142) connected to the 4400 series wlan controllers (OS Version 4.2 and 7.0).

  Regarding the client connection to access points, I have several questions:

  1. extent to which clients can connect to an access point (maximum possible vs recommended)?

  2. can I limit the maximum number of clients connecting to the access point in the gui controller? I found how to configure thresholds for sending traps when a number of clients connected to an access point is reached.

  3 How can I balance the number of customers between two adjacent ap, who use the same SSID?

  Best regards

  Thorsten

  Hello

  1. extent to which clients can connect to an access point (maximum possible vs recommended)?

  YEARS-

  Here is the link for possible Maximum...

  http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/
  
  c70ccfg.html#wp1085099
  
  Recommended , Not more than 20 clients per AP.

  2. can I limit the maximum number of clients connecting to the access point in the gui controller? I found how to configure thresholds for sending traps when a number of clients connected to an access point is reached.

  YEARS - here's the software bug that we had raised with the development team of thre...

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtj94508

  Symptom:
  
  There should be a way to limit the number of wireless clients that can associate to a lightweight AP.
  Conditions:
  Workaround:
  
  

  3 How can I balance the number of customers between two adjacent ap, who use the same SSID?

  YEARS - you can configure the feature aggressive load balancing across the WLC, it can help...

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• IPSec tunnel between a client connection mobility and WRV200

  Someone has set up an IPSec tunnel between a client connection mobility and WRV200? I can't get the right configuration.

  Agitation, these products are treated by the Cisco Small Business support community. Please refer to the URL: https://supportforums.cisco.com/community/netpro/small-business

• Limits of pix 506 for VPN client connections

  Hello. My company is looking to move away from using Microsoft's RRAS to workers to remote VPN connections. We have a 506th Pix currently serving 2 site VPN connections and client connections. Nobody knows what the limit for concurrent client vpn connections on a 506e and if having 10 to 20 clients connected at the same time (on a user base of 100 +) would cause problems. Any thoughts would be greatly appreciated.

  There is no license for the number of connections limit, this is more a limitation of resources. Check that the data sheet a 506E can handle 16 MB of 3DES VPN. It's marketing plug so the actual throughput will be lower.

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5708/ps5709/ps2030/ps4336/product_data_sheet09186a0080091b13.html

  Hope that helps.

• OID to display clients connected to AP

  Hello, can anyone help me or know an implementation of an OID to display the number of clients connected through an Access Point? I use a WLC 5508

  Thank you

  + 5 to solve your problem

  Sent by Cisco Support technique iPad App

• PIX: Cisco VPN Client connects but no routing

  Hello

  We have a Cisco PIX 515 with software 7.1 (2). He accepts Cisco VPN Client connections with no problems, but no routing does to internal networks directly connected to the PIX. For example, my PC is affected by the IP 172.16.2.57 and then ping does not respond to internal Windows server 172.16.0.12 or trying to RDP. The most irritating thing is that these attempts are recorded in the system log, but always ended with "SYN timeout", as follows:

  2009-01-06 23:23:01 Local4.Info 217.15.42.214% 302013-6-PIX: built 3315917 for incoming TCP connections (172.16.2.57/1283) outside:172.16.2.57/1283 inside: ALAI2 / 3389 (ALAI2/3389)

  2009-01-06 23:23:31 Local4.Info 217.15.42.214% 302014-6-PIX: TCP connection disassembly 3315917 for outside:172.16.2.57/1283 inside: ALAI2 / 3389 duration 0:00:30 bytes 0 SYN Timeout

  2009-01-06 23:23:31 Local4.Debug 217.15.42.214% 7-PIX-609002: duration of disassembly-outside local host: 172.16.2.57 0:00:30

  We tried to activate and deactivate "nat-control", "permit same-security-traffic inter-interface" and "permit same-security-traffic intra-interface", but the results are the same: the VPN connection is successfully established, but remote clients cannot reach the internal servers.

  I enclose the training concerned in order to understand the problem:

  interface Ethernet0

  Speed 100

  full duplex

  nameif outside

  security-level 0

  IP address xx.yy.zz.tt 255.255.255.240

  !

  interface Ethernet1

  nameif inside

  security-level 100

  172.16.0.1 IP address 255.255.255.0

  !

  access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.255.0 172.16.2.56 255.255.255.248

  !

  access extensive list ip 172.16.0.0 outside_cryptomap_dyn_20 allow 255.255.255.0 172.16.2.56 255.255.255.248

  !

  VPN_client_group_splitTunnelAcl list standard access allowed 172.16.0.0 255.255.255.0

  !

  IP local pool pool_vpn_clientes 172.16.2.57 - 172.16.2.62 mask 255.255.255.248

  !

  NAT-control

  Global xx.yy.zz.tt 12 (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 12 172.16.0.12 255.255.255.255

  !

  internal VPN_clientes group strategy

  attributes of Group Policy VPN_clientes

  xxyyzz.NET value by default-field

  internal VPN_client_group group strategy

  attributes of Group Policy VPN_client_group

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list VPN_client_group_splitTunnelAcl

  xxyyzz.local value by default-field

  !

  I join all the details of the cryptographic algorithms because the VPN is successfully completed, as I said at the beginning. In addition, routing tables are irrelevant in my opinion, because the inaccessible hosts are directly connected to the internal LAN of the PIX 515.

  Thank you very much.

  can you confirm asa have NAT traversal allow otherwise, activate it in asa and vpn clients try again.

  PIX / ASA 7.1 and earlier versions

  PIX (config) #isakmp nat-traversal 20

  PIX / ASA 7.2 (1) and later versions

  PIX (config) #crypto isakmp nat-traversal 20

• 867 EasyVPN server: Intermittent client connectivity

  I have a rather peculiar question with a particular router, which I use as an EasyVPN server.

  Customers have no problem to connect to the router. The Cisco VPN Client connects without problems and without fail every time.

  HOWEVER

  This does not mean that the customer can obtain from the server, which is located behind the router, to which they connect.

  They might be able to. They might not! It seems to vary randomly. Sometimes the client will connect, and the server will be accessible. Othertimes, the client will connect and it will not.

  Now, to do some very preliminary tests, I am STILL able to ping the router LAN interface once the tunnel is up. However, I may or may not be able to ping the server.

  Yesterday, for example, the connection came. I was able to ping an IP address on the local network of 192.168.0.9. The router is 192.168.0.15, I have, as mentioned above, ping without problem as well. However, the server, which is 192.168.0.1, was not accessible. After a couple disconnects / reconnect to the VPN client, I could ping 192.168.0.1 (and 192.168.0.15) and if I could get on the server without problem... However, I could no longer ping 192.168.0.9.

  It almost feels "subnetty", but there is nothing defined on the router that should cause this problem I can say. Clients receive an IP address in the range of 10.10.10.5 to 10.10.10.15 on a looping with IP 10.10.10.1.

  Specific no reason why the pool overlaps the closure? being a virtual interface should not make a difference on where the traffic is sent, the EFC plays sometimes strange games.

  If it's not too much to ask, you can disable this loopack?

• ORA-12518: TNS:listener could not hand off client connection

  Hello

  I'm getting "ORA-12518: TNS:listener could not hand off client connection" error trying to connect to the "PDB". Here are the details of my env and I do:

  Windows 7

  My PC to install Oracle 11 g 2 Client (that's how I got this PC). And I already 11 GR 2 installed Oracle software and a local database that is named "ORCL" (whichdesignates currently the stop).

  Yesterday, I installed Oracle 12 c (12.1.0) and created ORCL12C (CBD) and a PDBORCL (PDB). I connected to the PDBORCL as SYS and created user 'SCOTT '.

  I am able to connect to ORCL12C (PEH) without any problem (SQL * more and TOAD). I can go to PDBORCL (alter session set container = pdborcl) without problem. But I get the error above (ora-12518 am) when I try to connect to the user 'SCOTT' created in 'PDBORCL' using SQL * more or TOAD. I want to connect to the user SCOTT and create objects in schema SCOTT, etc.. I get the same error, even if I try to connect to the PDB as user SYS (alter session command works fine).

  I am new to 12 C. So it is quite possible that I'm doing something fundamentally wrong.

  C:\app\oracle\product\12.1.0\dbhome_1\BIN>sqlplus sys as sysdba
  SQL*Plus: Release 12.1.0.2.0 Production on Thu Nov 12 12:06:37 2015
  Copyright (c) 1982, 2014, Oracle.  All rights reserved.
  Enter password:
  Connected to:
  Oracle Database 12c Enterprise Edition Release 12.1.0.2.0 - 64bit Production
  With the Partitioning, OLAP, Advanced Analytics and Real Application Testing options
  
  SQL> show con_name
  CON_NAME
  ------------------------------
  CDB$ROOT
  
  SQL> select con_id,dbid,NAME,OPEN_MODE from v$pdbs;
      CON_ID       DBID NAME                           OPEN_MODE
  ---------- ---------- ------------------------------ ----------
           2  250475996 PDB$SEED                       READ ONLY
           3   94279121 PDBORCL                        READ WRITE
  SQL>  select service_id,name,pdb from v$services;
  
  
  SERVICE_ID NAME                                                             PDB
  ---------- ---------------------------------------------------------------- --------------
           6 pdborcl                                                          PDBORCL
           5 orcl12cXDB                                                       CDB$ROOT
           6 orcl12c                                                          CDB$ROOT
           1 SYS$BACKGROUND                                                   CDB$ROOT
           2 SYS$USERS                                                        CDB$ROOT
  
  
  SQL>
  
  
  
  SQL> select substr(username, 0, 15) username, user_id, account_status from dba_users where username = 'SCOTT';
  
  
  USERNAME                                                        USER_ID ACCOUNT_STATUS
  ------------------------------------------------------------ ---------- --------------------------------
  SCOTT                                                               103 OPEN
  
  
  SQL>
  
  
  
  
  
  

  Hello

  I think you are the problem of configuring the following listener results:

  >

  1. (SID_DESC =
  2. (GLOBAL_DBNAME = PDBORCL)
  3. (SID_NAME = PDBORCL)
  4. (ORACLE_HOME = u01/app/oracle/product/12.1.0/dbhome_1)
  5. )
  6. )

  >

  as you can see, you have defined an entry static listener for SID PDBORCL. If I read your message correctly, you are CDB Instance SID is ORCL12C and you're PDB is PDBORCL.

  So, in my opinion, as part of the configuration is the problem. PDB is saved as a dynamic Service to the Instance that you added

  an entry static listener for a non-existent Instance. And so you're static listener overlaying the APB Service dynamic PDBORCL configuration.

  and that is why it does not work.

  Look at the output of a registerd APB to a listener success:

  lsnrctl status

  ...

  Summary of services...

  Service '+ ASM' a 1 instance (s).

  Instance '+ ASM' READY State, has 1 operation for this service...

  Service 'ORCL12C' has 2 occurrences.

  Instance of 'ORCL12C', status UNKNOWN, has 1 operation for this service...

  'ORCL12C' instance, State LOAN, has 1 operation for this service...

  Service 'PDBORCL' has 1 instance (s).

  'ORCL12C' instance, State LOAN, has 1 operation for this service...

  The command completed successfully

  ..

  Concerning

  Timo

• I'm lookng for a product where I can produce a PDF secure for several clients.  When the document is finished, I want to fix it with a password, to make it more difficult to copy, but then I want to record in a secure location, send the link and not

  I'm lookng for a product where I can produce a PDF secure for several clients.  When the document is finished, I want to fix it with a password, to make it more difficult to copy, but then I want to record in a secure location, send the link and the password to the clients.  When customers go to download the PDF, they will have to if they accept the terms and conditions.  If it is accepted, they can download the document.  Working in DocumentCloud PDF services?  Thank you.

  Hi davidc21010281,

  You can try the DC Acrobat Adobe Acrobat download free trial | Acrobat Pro DC. Where you can create a secure PDF file (using Acrobat|) Securing PDF files with passwords) & send them to your customers (send and track online documents |) Tutorials Adobe Acrobat DC), on the other end, customers can download the PDF but they would need the password/certificate in order to open the PDF file.

  See also the FAQ of Adobe Document Cloud.

  Kind regards

  Nicos

• 'Require SSL for client connections and Administrator display.

  Whence him 'require SSL for client connections and Administrator display' option under Display Configuration > global settings go into View 5.1? I don't see this because I do not have the right license or move it elsewhere?

  According to the documentation of view 5.0 (http://pubs.vmware.com/view-50/index.jsp?topic=/com.vmware.view.installation.doc/GUID-5706AA18-795A-4575-96EF-98CA3E19228C.html), the option should always be there.

  Thank you!

  In the login server access configuration display: > servers > server connection > edit one of the servers, and you should see the optoins

• ORA-12518: TNS:listener could not hand off client connection (DBD ERROR: OCIServerAttach)

  Hi again,

  I'm on my business management console and the database Instance and the headset shows the green arrow, but the connection of the Agent of the Forum shows a red arrow down and the error:

  Status: failed

  Details: ORA-12518: TNS:listener could not hand off client connection (DBD ERROR: OCIServerAttach)

  My OraClrAgnt service is up and running (using winxp pro, oracle 11 g 2), I'm on my pc at home, all my ports are open (name of my machine's "abigail" and it's dmzhost)

  Any suggestions to solve this error?

  My Tnsnames ora file:

  ABIGAIL =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ABIGAIL)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl.0.0.10)

  )

  )

  LISTENER_ORCL =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ABIGAIL)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SID = ORCL)

  )

  )

  RMAN =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ABIGAIL)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = rman.abigail)

  )

  )

  My listener.ora

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = CLRExtProc)

  (ORACLE_HOME = E:\app\abigail\product\11.2.0\dbhome_1)

  (= Extproc PROGRAM)

  (ENVS = "EXTPROC_DLLS=ONLY:E:\app\abigail\product\11.2.0\dbhome_1\bin\oraclr11.dll")

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = ABIGAIL)(PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = E:\app\abigail

  My SQLNET. ORA

  SQLNET. AUTHENTICATION_SERVICES = (NTS)

  NAMES. DIRECTORY_PATH = (EZCONNECT, TNSNAMES, LOCALHOST)

  NAMES. TRACE_LEVEL = ADMIN

  My alert file

  < time msg = "2013-10 - T 10, 20: 47:02.687 - 04:00 ' org_id = 'oracle' id_comp = 'tnslsnr'"

  type = 'UNKNOWN' level = '16' = host_id "ABIGAIL."

  host_addr =': 1' >

  < txt > 10 October 2013 20:47:01 * (CONNECT_DATA = (CID = (PROGRAM =)(HOST=__jdbc__) (USER = SYSTEM)) (SERVICE_NAME = orcl.0.0.10)) * (ADDRESS = (PROTOCOL = tcp (PORT = 38289))(HOST=127.0.0.1)) * establish * orcl.0.0.10 * 12518

  < / txt >

  < / msg >

  < time msg = "2013-10 - T 10, 20: 47:02.687 - 04:00 ' org_id = 'oracle' id_comp = 'tnslsnr'"

  type = 'UNKNOWN' level = '16' = host_id "ABIGAIL."

  host_addr =': 1' >

  < txt > TNS-12518: TNS:listener could not hand off client connection

  AMT-12560: TNS:protocol adapter error

  < / txt >

  < / msg >

  My listener status and services

  LSNRCTL > status

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Prod

  ction

  Start date October 10, 2013 22:47:58

  Uptime 0 days 0 h 2 min 1 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Listener parameter File E:\app\abigail\product\11.2.0\dbhome_1\network\admin\l

  istener.ora

  E:\app\abigail\diag\tnslsnr\ABIGAIL\listener\ale log listener

  rt\log. XML

  Summary of endpoints listening...

  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=ABIGAIL) (PORT = 1521)))

  Summary of services...

  Service 'CLRExtProc' has 1 instance (s).

  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...

  Service 'orcl.0.0.10' has 1 instance (s).

  Instance "orcl", State LOAN, has 8 managers of this service...

  The command completed successfully

  LSNRCTL > services

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))

  Summary of services...

  Service 'CLRExtProc' has 1 instance (s).

  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0

  LOCAL SERVER

  Service 'orcl.0.0.10' has 1 instance (s).

  Instance "orcl", State LOAN, has 8 managers of this service...

  Managers:

  "D006" put in place: 0 denied: current: 0 0 max: 800 status: loan

  DISPATCHER < machine: ABIGAIL, pid: 1312 >

  (ADDRESS = (PROTOCOL =)(HOST=ABIGAIL) (PORT = 1060) CST)

  "D005" put in place: 0 denied: 12 current: 0 max: 800 status: ready

  DISPATCHER < machine: ABIGAIL, pid: 1288 >

  (ADDRESS = (PROTOCOL =)(HOST=ABIGAIL) (PORT = 1061) CST)

  "D004" put in place: 0 denied: 1 current: 1 max: 16383 State: loan

  DISPATCHER < machine: ABIGAIL, pid: 1260 >

  (ADDRESS = (PROTOCOL = tcp)(HOST=ABIGAIL) (PORT = 1063))

  "D003" put in place: 0 denied: 1 current: 1 max: 16383 State: loan

  DISPATCHER < machine: ABIGAIL, pid: 1140 >

  (ADDRESS = (PROTOCOL = tcp (PORT = 1062))(HOST=ABIGAIL))

  "D002" put in place: 0 denied: 1 current: 1 max: 16383 State: loan

  DISPATCHER < machine: ABIGAIL, pid: 140 >

  (ADDRESS = (PROTOCOL = tcp (PORT = 1059))(HOST=ABIGAIL))

  "D001" put in place: 0 denied: 1 current: 1 max: 16383 State: loan

  DISPATCHER < machine: ABIGAIL, pid: 1072 >

  (ADDRESS = (PROTOCOL = tcp (PORT = 1057))(HOST=ABIGAIL))

  "D000" put in place: 0 denied: 1 current: 1 max: 16383 State: loan

  DISPATCHER < machine: ABIGAIL, pid: 748 >

  (ADDRESS = (PROTOCOL = tcp (PORT = 1058))(HOST=ABIGAIL))

  "DEDICATED" set up: 0 denied: 0 status: ready

  LOCAL SERVER

  The command completed successfully

  I added this on my listener.ora

  DIRECT_HANDOFF_TTC_LISTENER = OFF

  Now it works!

  Moral of the story, google is your friend lol. Thanks for replying tho!

• VI Client connections

  Can number of concurrent VI client connections there be on VSphere 4.x?

  Thank you

  Prashant

  Hello, Prashant-

  It depends on your version of vSphere.  By the maximum of Configuration docs, the maximum rates are:

  vSphere 4.0 with 32-bit vCenter server: 15

  vSphere 4.0 with 64-bit vCenter server: 30

  vSphere 4.1 (vCenter works on 64 - bit): 100

  The docs of Maximums:

  vSphere 4.0: http://www.vmware.com/pdf/vsphere4/r40/vsp_40_config_max.pdf (see page 7)

  vSphere 4.1: http://www.vmware.com/pdf/vsphere4/r41/vsp_41_config_max.pdf (see page 6)

  Enjoy.

• Configure client connections view

  my environment is essentially connected LAN Wyse P20 customer zero.  When you configure the client connections to see that I am currently using the default 'secure connection tunnel.

  should I consider that instead use "direct connect"?

  Thanks in advance!

  Cheers.

  I don't think it's that much more administrative overhead.  You can change the direct connection and since the LAN environment based so there would probably changes to firewall is necessary.  In anyway, if I'm not mistaken the P20 would directly connect anyway when using PCOIP.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• TNS-12518: TNS:listener could not hand off client connection

  Hello
  
  I get this error:
  TNS-12518: TNS:listener could not hand off client connection
  AMT-12547: TNS: lost contact
  AMT-12560: TNS:protocol adapter error
  AMT-00517: lost contact
  Solaris error: 32: Broken pipe
  
  My processes are 150 limit and current are 39 so no problem with the process
  is that enough I have 4 GB of free memory
  dispachers I 5 I think are good enough
  
  so, where we the problem?
  
  Thank you very much

  Can you please confirm if your DB is currently running? If Yes, then try alter system set local_listener ='(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=klndw01) (PORT = 1523)))
  ' and try to connect again.

  Kind regards
  Julien

• Several clients that connect to the same user via the SSL protocol

  It's possible? I can't find any documentation about it. Essentially, because of the way our system has been designed, connect us the two our system and our front-end web server to the same processing back-end user. Now, we have an obligation to use PKI/SSL to connect users.

  I have experimented with OWM and the TCPS, and was finally able to get a connection between Client1 and the server a user to test called PKI_TEST. The problem is that I get an ORA-28860 error when I try to connect Client2 to the server to the same user. I tried to import the Client2 certificate into server's wallet, but which is perhaps the origin of the problem. So here are my thoughts/questions.

  1. how to import the client certificates in the server with the same CN wallet? Seems to be a 'no', but maybe I am doing something wrong.

  2. can I import certificate user of Client1 Client2 portfolio so Client2 performs authentication by using the same certificate that worked for Client1?

  3. can I copy portfolio of Client1 to Client2 so Client2 uses the same portfolio that has worked for Client1?

  4. can I associate a single user with multiple CNs for the client certificates will be different in the wallet of server?

  Any help would be appreciated.

  Hello

  You can just copy the client1 client2 on portfolio, so the client2 can connect / authenticate over SSL to the same DB user.