Several codes error on my XP pc

Similar Questions

• Several Codes error error 80070652 x 0 and 0 x 643

  Hello

  I need assistance with several errors in my computer. I would have liked to just call the technician by phone but maybe because the computer is now the policy of extended warranty may be that it is no longer available? I have a desktop of Microsoft Windows XP Media Center Edition 2005. Initially, I tried to uninstall my Zune software but couldn't because a dialog box said there was another program, still trying to install (error 0 x 80070652). I was not aware of such a program, but I did not know that Microsoft Service Pack 1.1 was not installing correctly so my hypothesis was the following: I need to know why MS 1.1 is not installed. I received the error code 0 x 643. When I tried to uninstall and reinstall each SP as I had done in the past when I had this problem, I was unable to re - install updates of the framework because I got the message from one another program is trying to install. I have not tried anything since and I need your help fast because I'm a student academic who is fixing this problem for my parents before the end of break.

  I think that the McAfee had in fact expired.

  Ouch. Hope that doesn't end up being a problem.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Norton and McAfee applications are known to do not uninstall or upgrade properly. Roll up your sleeves & cross your fingers...

  [You may want to print these instructions for reference offline. [If a step said to restart, restart! ]

  1. click right on the following link to download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. right click on the following link to download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some, you have a copy of your key of handy product, uninstall Norton Internet Security and LiveUpdate and all Norton Add ons via Add/Remove programs.

  4 IMPORTANT! -Online enable WF immediately after the reboot!

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #7 below!

  5. double-click the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  6. do a clean install of Norton Internet Security 2012 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: do NOT activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run (Norton) LiveUpdate until you get a prompt "no update more".

  8. click right on the following link & SAVE to download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  8B. do a right-click on the file downloaded in # 8 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop.

  8. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 8 b above & double-click on the script (i.e., ie8 - rereg.cmd) to run the command, then restart again.

  9 start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »).

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  If you return to check the out parameter #1 above, it'll be "Use my current..." "but now it's going to be"point"to IE so that you don't need to change anything or reset. [Think of it.]

  10. check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it.

  11. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [2]

  11. b double-click the file that you saved in # 11 above & accept invites him to MERGE with the registry data.

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 & run the difficulty.

  13 IMPORTANT - DON'T SKIP THIS STEP! Open Internet Explorer (only!) to http://support.microsoft.com/kb/971058 from => and run the automated troubleshooter from end to end. [3]

  14 restart once more.

  15 open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you can install all the available now security updates (for example, KB2572067;) KB2656353).

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8.

  Tip: Do NOT install any other updates software optional or any updated material in option .

  16. in response to this post with a status report.

  Good luck!

  ==================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [3] full Disclosure: running the utility of automated troubleshooting will remove your history of update but not the list of installed updates.

• Receive several codes error over the last seven days. This means - my computer is dead?

  Would like to inform if my computer is really damaged:

  The following errors are produced

  Error 2-32 in the last 7 days

  Error 11-190 in the last 7 days

  Error 14-1 in the last 7 days

  Error 55 7 during the last 7 days

  Error 102-19 over the last 7 days

  Error 1001-36 in the last 7 days

  This means - my computer is dead?

  Thank you

  Original title: Error Messages

  Hello

  They are very good methods for most Windows troubleshooting performance problems.

  Error: Windows Explorer has stopped working
  http://support.Microsoft.com/kb/2694911

  Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">
  http://support.Microsoft.com/kb/2681286#method22

  Performance and Maintenance<- check="" these="" especially="" the="">
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1

  Other methods of troubleshooting to use according to your needs:

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at Applications.
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp
  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set
  SEE drivers to hide Microsoft - update those with Dump in their names. (Also
  updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have Windows Vista Home Premium. Recently cannot send or receive Window Live Mail 2011, has several different error codes 0 x 8030107, 0 x 8004849, 0800106ba, 0 x 8004820

  I have windows Vista editions Home Premium, the problem:

  Can't send or receive messages for the Windows LIve Mail Hotmail account (ridgerunner6).

  Server error: 0 x 80048820
  Server: 'https://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx '.
  Windows Live Mail error ID: 0 x 80048820, 0 x 8030107, 0 x 8004849

  at different times, there are several different error codes 0 x 8030107, 0 x 8004849, 0800106ba, 0 x 8004820, Server error: https //mail services.live.com/Delta Sync_ v2.0.0/Snyc.aspx'

  I did some checking and all simply unable to solve the problem

  Hello

  The question you have posted is related to Windows Live and will be well suited in the Windows Live Forum. Click on the link below.

  Windows Live Solution Center

  http://www.windowslivehelp.com/product.aspx?ProductID=15

• Impossible to install "windows Vista Service Pack 1 (KB936330) - Code error 800F081F & put to several other issues

  Kept having the same error code while performing updates 'window '.

  Similar error problems when updating: -.

  (1) Internet Explorer 8 for windows Vista - error 8007071B
  (2) KB973923 - 643 error code
  (3) KB973688 - 643 error code
  (4) KB954430 - 643 error code
  (5) KB973525 - 8007371B error code
  (6) KB951847 - code error 80073712

  Thank you.

  Hi, Jessie

  My dose in your other thread (http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/26f384b4-c937-415c-bc08-19db6f46d38f) solve this problem, too, or...? ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• message of undefined LabVIEW on custom codes error code

  "I use the VI General error handler to define custom errors, I have inserted all entries for this vi (user-defined descriptions, codes, user-defined error code, source of the error, type dialog and error in) but some I still get the message:"

  This error code is not set. Undefined errors can occur for several reasons. For example, no one has provided a description for the code, or you could have wired a number which is not an admission of error code error code.

  In addition, undefined error codes can occur because the error concerns a third object, such as the operating system or ActiveX. For these mistakes of third parties, you may be able to get a description of the error by searching on the Web for the error code (5501) or to its hexadecimal representation (0x0000157D). "

  Why? someone, anyone, help!... Thank you very much

  How you use the error handler General VI? Do you have examples of code?

  The following code displays the error dialog using my custom error description and the 'message' is also used my custom error description:

  

  The error is not changed - if I go to "explain the error", he then returned to the standard description for this error code (i.e. undefined). Using the Manager general error applies only the descriptions of the user to the call of the VI. You can always create a wrapper for the General error handler that has all your descriptions/error codes defined and then use it instead of the built-in one.

  To change the database from LabVIEWs internal error and/or include with a built application (one of the build specification options), you must use the custom error files.

• code error-808

  My VI is checked several conditions, when true, a Subvi expected popup and wait for my entry (press one of the four buttons), however this Subvi blocks (IE closed without waiting for my entry), so I checked the error out of this sub - VI and he said: code error-808, source: Timed structure (s): L110126428

  What does that mean?

  You can do either configuration GUI of the loop:

  

  or you can do it on the block schema by adding an entry to the entry node.

  

  Once again, it's all in the documentation.

• "windows has no start windows on the local computer search... code error 2147218141".

  I had to fix it several times and now does not yet: "windows does not have start windows on the local computer search... code error 2147218141".» I ran sfc/scannow, not received any error.

  Microsoft FixIt couldn't help.

  How can I do this time?

  I tried method 2, but things have just gotten worse.

  I see now 3 new errors:
  1: TL - bootstrap.exe has encountered a problem. I believe that it's associated with my smartphone.
  2: exception processing message c0000013 parameters 75b65f7c 75b65f7c 4 75b65f7c
  3: DrWatson Postmortem Debugger has encountered a problem and needs to close.

  Ugh!

  ------------------------------------------------------------------------------------------------------------------------
  Looks like I found a solution. I found that I still had
  WindowsSearch-KB940157-XP - x 86 - enu.exe in my file of download of one of the (now how many) times past, I had to solve this problem. I did a re-install and it seems that the Outlook and the Office up and running again.

  Phew!

• "Your PC needs to be repaired - no code error or anything"

  Hello

  I rebooted my laptop today and got your PC needs to be repaired message but that is everything that appears on the screen, no code error or something else, literally that sentence. I have the windows CD that allows me to solve problems etc, but I have no idea where to start as a result of not having an error code. I was wondering if anyone has had or seen something similar and might help or might suggest that what I have to do in the first place.

  Thank you

  Hi Sam,

  There are several factors behind this concern. Let's see if we can address this in a few simple troubleshooting steps:

  -Press the Windows key + r.

  -Type cmd , and then press enter.

  -Type sfc/scannow , and then press enter

  -Let him finish and restart.

  Sfc/scannow command say your Windows search and replace corrupted system files.

  If this does not work for do you a System Restore. Looking to restore your PC to an earlier point in time.  (last resort)

  Feel free to update us if you need further assistance.

  Best regards.

• Miniport Wan code error 31 PROBLEM

  I have a problem with 3 of my pc wan miniports: code error 31
  After several drivers updates and deactivation/reactivation, it doesn't help and I can't use my printer which is detected by the computer but "off the power.
  ????
  Any idea?

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

  
  

  Hello
  
  Please get your language in the drop to bottom of the page to post your questions in the language of your choice down. The forum you posted is fr English only. If you can't find the desired language, press the options of additional international destinations can be found by following the link below:
  
  Thank you

  http://support.Microsoft.com/common/international.aspx

• How to fix Adobe Application Manager code error-60 download appears corrupt but only for Photoshop CS6 app

  How to fix Adobe Application Manager code error-60 download appears corrupt but only for Photoshop CS6 Creative Suite cloud App. Several attempts have been made to install Photoshop CS6 with Adobe Application Manager without success. All the other Creative Suite apps has been downloaded successfully. I get Installation failed when trying to install Photoshop. How no one corrects it?

  PJBarbour I would recommend working with your IT Department to solve your network problems.  Aid and the trial license is only a workaround and do not solve the root cause to be able to download the Adobe Application Manager software.

  There are other offers available currently in the creative cloud, i.e. Adobe Edge and Lightroom, you need to download and install using the Adobe Application Manager to the licensed software.

• code error-8072

  I can't empty my trash. The operation cannot be completed because an unexpected error has occurred (code error-8072).

  Does anyone have an idea what this error code means? Or better yet, how to fix this?

  Stop

  Unplug your external devices

  Restart in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  Check your hard drive with disk utility

  Using disk utility to check or repair disks - Apple Support

  then empty the trash

  Stop and reconnect the devices and start normally.

  If the problem persists, check your system with AHT

  Using Apple Hardware Test - Apple Support

• How can I fix the code error 56?

  Two years ago, I bought my iPhone6 (to the US Apple store) and I used iPhone6 in South Korea. So, I can't take refurbish here.

  When I was trying to update iso 9.3, pop up code error 56 at the end of the update process. so, I removed the chip from the usim card and tried again. but the pop-up code error 56 again. How can I fix this error?

  Take a look at these articles:

  Solve the iOS update and restore error in iTunes - Apple Support

  Get help with iOS update or restore errors - Apple Support

• Get a zip code error when your book order

  Getting a zip code error when your book order is exact zip code th for my address.

  In the Canada.

  Help

  You order the Canadian Apple store online? If this isn't the case, then you must change your store site online on the Canadian site. Scroll down to the bottom of the page where you should find an icon of circled on the right corner flag. Click it, and then select the Canadian store in the list and re - buy article. It must now accept Canadian postal codes rather than postcodes American.

• Webloc changed Safari icons: code error-10823

  This morning when I turned on my Mac, I noticed that all my Safari webloc icons turned into another (basically @ sign and HTTP in the icon). When I right click the icon's default implementation "Simulator.app (9.2). By tradition, Simulator.app is part of Xcode. However, I've updated or use Xcode or any application that is part of Xcode in the past 2 weeks (approximately).

  Yes, ok, let's change the default application associated with "webloc" icons for Safari. Right-click. Default app for Safari. I get the error shows: "the element is locked or damaged, or in a folder you have not allowed to edit (code error-10823)."

  After removal of the dialog box, I get another dialog stating: " ""the operation cannot be completed. An unexpected error has occurred (code error-10823). »

  I have restart mode without failure. Same question. I can't find something on the code of error-10823 and on why a land I would get this message that the element is locked or damaged.

  Any ideas? Thank you.

  Mac mini end of 2012

  El Crap 10.11.3

  Although the problem is not the same, please follow the instructions in this article to support to reset the launch Services database. Instead of typing the shell command in the article, I suggest that you copy and paste the web page in the Terminal window. Make sure you only select the entire line. One way to do that is triple - click anywhere in the line.

  If you do not already have a current backup, back up all data before proceeding. You should perhaps log out or restart to see a change.