Several connection profile with the profile settings of 'master' unique in force.

Similar Questions

• Issues with the display settings - all super tiny

  I have problems with the display settings, all of a sudden, everything was super great and difficult to see all the toolbars on the screen, I went to the settings display, and somehow managed to make everything incredibly tiny.  I found a page via the display settings (avancΘs?) that allowed me to adjust the percentage of the elements on the screen.  I reduced to 40%, and then the setting stuck and now I can not see or read anything.  I'm trying to return to the display settings, but I can't find this 'page' which allowed me to make this change.

  I saw a similar post:

  "I messed up my display settings. my resolution is so great that I don't see anything but black vertical lines and sets of 3 white dotted lines in sequence across my screen. my mouse can not be seen either. is there anyway to restore my original settings? It's as if everything is bigger there should be 200 to 300%.

  Hello

  There are a few things you can try:

  1. reboot the PC then start tapping the F8 key until you get the Windows Advanced on-screen Menu of Options.

  Then choose "last good known Configuration". Allow Windows to start.

  2. restart PC then start tapping the F8 key until you get the Windows Advanced on-screen Menu of Options.

  Then choose "Enable VGA Mode". Windows XP loads with the color values that can handle your "lower" resolution and display driver Once in Windows, change the resolution, then restart the PC.

  3. try to go into "Safe Mode", which is accessible in the same way as "VGA Mode". "Review the same routine as no. 2.

  I tried to hit F8, but nothing happens, I tried to reboot several times.  How do the Advanced Options?  Someone knows it the screen that I talk with the possibility of adjusting the percentages, how can I find it again?  So I can not really read or see anything.

  Hi fixxazd,

  For instructions on starting in the advanced system recovery options, see the following articles:

  A description of the options to start in Windows XP Mode

  Advanced Troubleshooting for General startup problems in Windows XP

  See also:

  How do advanced clean boot troubleshooting in Windows XP

• Tecra M5 - SD card reader works with the factory settings

  Hi all
  My SD card reader has been in place. It will read a few cards of 4 GB and won't read other (usually newer).
  All cards in this problem area are Transcend cards 4GB SD (HC or whatever the format more later is)
  The cards, the M5 will not read can be read both my PDA, but also an old Tecra 9000 (who will also tell the other 4 GB cards)

  The PC was recently engineers have a problem so I asked to look at this problem. They reported that it was a software problem, because if they load the recovery CD (that is, to bring the machine to factory State) the SD card reader reads cards problem OK; Back to my setup and the SD card reader can not read cards SD - error message is "the request cannot be performed because of an i/o device error."

  So I guess that I need new drivers. Very well except that it has no drivers for the drive SD card itself. Its a part of the motherboard. There is a 'secure module SD' on the download from Toshiba site and I downloaded and installed the SD Secure module (dated 2008)
  However, Device Manager still shows that the SD host controller driver is Microsoft version 01/10/2002 6.0.4069.5

  If anyone has ideas on how to fix

  TFA
  R

  Hello!

  > back to my setup and the SD card reader will not read SD cards
  Can you explain what you mean, please?

  I put t understand why you n t run factory if it s a software problem. I never had problems with the factory settings because then I can make you that all functions work properly on my laptop.

  Good bye

• I can't access my hotmail account or book a hotel since the upgrade to 3.6.8. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings for

  I can't access my hotmail account among some other sites since the upgrade to 3.6.8 on my macbook. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings to make sure they are correct. Contact your network administrator to make sure that the proxy server is running. "I can not even find the proxy settings more.

  Windows: Tools > Options > advanced > network > settings
  OSX: Firefox > Preferences > advanced > network > settings
  Linux: edition > Preferences > advanced > network > settings
  Set your settings to connect to the 'No proxy', if you are not using a proxy.

  Firefox 3.6.6 added a new preference for connection settings, use proxy Panel"system settings", and the default value is the point. " This new preference does not affect most users, because they probably do not have a proxy set in place in their operating system. Therefore, most users should use the setting "no proxy".

• What do I have to remove the battery from my PC when I connect it with the cable?

  So that the battery do not damaged.
  What do I have to remove the battery from my PC when I connect it with the cable?
  Tell me what I need to do for that battery not damaged

  Hi mate,
  Don t worry, just use your machine and leave your battery in your machine, because an electronic load look at your battery, so no damage will be caused.

  You know, technology is in fact at a good level and I think it s ok to operate your machine with cables and battery SET. :

  Greetings

• Problem in creating several attributes XML with the same name of the attribute

  I am trying without success trying to create several attributes XML with the same name, as shown here in a Microsoft example configuration file:

  
  
    
       
       
       
    
  

  I'm calling the NewDocument GetRootElement functions and then "newelement" (appSetting), "newelement" (add)

  Then I call AddAttribute with add, key & Key0, then with add, value & 0.  This seems to work fine but when I try to add the second pair of key & Key1 and value attributes & 1 for item "Add" replaces ""and I find myself with"" only.

  I do something wrong or CVI is not able to create an XML of this type?

  Thank you

  Here's how you do it. I show not to keep things simple error checking.

  #include

  public static void CreateAddElement (mother of CVIXMLElement, const char * key, const char * value)
  {
  Add the CVIXMLElement;
  CVIXMLNewElement (parent, -1, 'Add', &add);)
  CVIXMLAddAttribute (add, "touch", key);
  CVIXMLAddAttribute (add, "value", value);
  CVIXMLDiscardElement (add);
  }

  void main (void)
  {
  CVIXMLElement root, and appSetting;
  Doc CVIXMLDocument.
   
  CVIXMLNewDocument ("configuration", &doc);)
  CVIXMLGetRootElement(doc, &root);)
  CVIXMLNewElement (root,-1, "appSetting", and appSetting);
  CreateAddElement (appSetting, "Key0", "0");
  CreateAddElement (appSetting, "Key1", "1");
  CreateAddElement (appSetting, "Key2", "2");
  CVIXMLDiscardElement (appSetting);
  CVIXMLDiscardElement (root);
  CVIXMLSaveDocument (doc, 1, "c:\\temp\\temp.xml");
  CVIXMLDiscardDocument (doc);
  }

• connection Bluetooth with the mobile phone cannot be established

  HP pavilion laptop g6 with windows 7.

  connection Bluetooth with the mobile phone cannot be established, all drivers were dated until, when it is associated with my phone samsung smart, driver downloads and everything is ready for use.but when click the smart phone

  It shows offline and it said no device ID is given,

  What to do, please help

  my portable BT device is defective? or some other problem, has also tried to connect other phones too, but same problem.

  Rgds,

  Hello

  I just want if sure that you have the right driver installed from this first link provided in the answer from the Support Engineer. If you click this link, then clikc the first option 'Use the device in Windows 7 Troubleshoot utility' need you a paragraph with a link to the appropriate driver.
  I will link here just to make sure.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?swlinkmsg=200&cc=us&DLC=en&docName=c01590950&LC=en&product=5068623&softwareitem=ob-76382-1
  It's the right driver you need. Please verify that this is the one that you have installed and do we know the results.

• Export issues of sequences with the correct settings for DVD

  Hi - I'm relatively new at first, but working on a project that is very important for me - for the life of me I can't understand correctly export settings.

  I have compiled from home movies of my family in a few sequences for the 60 years of my dad. I worked on these weeks now get cleaned and put all together. In total, it's about 24 hours of footage. These videos have all turned initially on a very old camera video in the 80 and 90 - the kind you actually stuck a VHS tape in. My ultimate goal is to put these or on a DVD (although I guess that's too many images for one), or a drive flash or something of all compiled in one video.

  So far, I got error messages on not enough disk space - so I tried breaking the sequences and exported individually as smaller files. But now, when I export those, all videos come out tiny - the video focuses on a much larger screen, do more fit to size. I studied everything about elongation and corresponding parameters and I tried everything. Of course I do not something good, I don't know what.

  I tried all different export settings, the settings of the sequence, and I thought I was following with the sequence settings, but I guess I'm not. Although I worked on it for weeks, I am out of time. His birthday was yesterday, and I wanted to give her the finished disc tomorrow. This does not seem possible as I am about to give up!

  Someone please help! I would be grateful if someone could guide me through what my sequence settings should be and what my export settings should be and how to get the video output to the correct size for the screen.

  I appreciate your help,

  Danielle

  Time of export will vary widely, depending on at least these factors

  1 - your computer... Processor and the amount of RAM, and is this external drive, USB2 and USB3?

  2. what you change, and effects that you have applied your 718 x 480 video size... is odd, the usual when scanning a VHS tape is 720 x 480, so your video requires 'some much' extra processing

• The video starts for a few seconds and stops.  I think it may have something to do with the corresponding settings?  I have a Canon HF 20.  The settings are 30 PF; MPX 24; Cine mode;. MTS; Cadence 29.97Computer (PC) has 16 GB of Ram. disk space. I have so

  The video starts for a few seconds and stops.  I think it may have something to do with the project settings match & camera.  I have a Canon HF 20. The settings are 30 PF; MPX 24; mode cinema; .mts;. 29.97 frame rate;.  Computer (PC) has 16 GB of Ram. Intel7 on video; 85 GB free space-free workplace.

  I tried changing the settings in the program, although I don't think that I'm doing it correctly.  Video plays perfectly in the canon software.  Any ideas? Thanks Steve

  Pf30 soul it records progressive, but puts it as interlaced on internal memory.

  Better is to implement a project of 30 p manually as elements are likely to be interpreted as 60i

  If so, you need to interpret all the clips in the assets of the project at 30 p.

  MXP mode means that it has been saved in 24 Mbit/s.

• When I'm accommodating the toolbar of the new option to arrange the icons on the toolbar toolbar change several tools come with the words "wrong tool" and have no icon associated with them. What are these missing tools 'bad '?

  When I'm accommodating the toolbar of the new option to arrange the icons on the toolbar toolbar change several tools come with the words "wrong tool" and have no icon associated with them. What are these missing tools 'bad '?

  I see you have fixed this now, but I was about to tell you that you could have accommodated in the 'Bad' by its shortcut "I" tool.

  

  To save a custom toolbar, get everything the way you want and click on the button space work, click new workspace

  

  Type a name for the workspace, and check all three options.

  

  If I have to use a single screen, I use a variant of the Essentials workspace with minor panels collapsed and dock for main panels.  I call this Essentials 2

  

  It also seems to me that with all these options, it's stupid not to take full advantage of them, so I separate my most used instruments for their own group and double column toolbar to adjust the screen.  I tried to drop in the groups for the most used tool near the document image (right). I love it, but it take some time remembering the new positions.

  

• I want Photoshop, etc. on my new computer with the same settings I have on my old. I can't find a way to get there.

  I want Photoshop, etc. on my new computer with the same settings I have on my old. I can't find a way to get there.

  Using Adobe Creative Cloud sync settings

• create a new virtual machine with the default settings?

  I was wondering if there was a way to create a new virtual machine with the default settings.

  For example, let's say I want all new Lion VM to have 2 CPU cores. Is there a way to set this automatically? There are other parameters I want a new machine to inherit automatically, I was wondering if there is an automatic way to do this, or is it a feature request...

  Thanks in advance

  lerker wrote:

  Just for my clarification, when you say a vm model, basically I would execute a finder copy then drag back to the VM library, right?

  Yes.

  On the orders of spcirpting, it would be unix commands or are there specific vmware controls that make your job easier (in Applications/VMware\ Fusion/content or elsewhere)...

  IIRC, VMware Fusion 3 and later versions has an AppleScript dictionary, but it is not yet officially supported and may not be able to do what you want so, basically, only Unix Shell scripts, that's what I was referring to.  For an example, see my script attached to the following response: Re: vmware - script of the creation of the vm and the operating system installation process

• Question about several popular vm with the same kernel version

  So, I have been informed that ESX is smart enough for to run several virtual machines with the exact same kernel that it loads only one instance of the kernel in memory for all of them so that it saves space in RAM. This seems quite remarkable to me, and I'd like to see if VMWare has any white papers or other documents on this. I'd like to believe it's true, but it seems incredible to believe.

  Is this really how ESX functions? If I have 10 XP SP3 machines with the same level and exact same version of the kernel patch, VMWware won't really load only one instance of the core XP in RAM to separate the 10 machines? If he does that, how handles when 10 machines all want access to the same statement in kernel mode at the same time separate?

  Welcoem to the Forums - ESX will actually 10 instances of the core of the customer even if they are the same OS - but once loaded using Transparent Page Sharing the vmkernel (the o/s of the ESX Server) can recognize identical pages and store them a time-read only memory - if the virtual machine tries to write to that page a copy and writing is done - if this new page is another page in memory that one instance is maintained. This saves a TON of memory-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• What is the higher for Mac OS which is compatible with the Creative Suite CS5 Master programs?

  What is the higher for Mac OS which is compatible with the Creative Suite CS5 Master programs? I use OS 10.6.8.

  I think you're at max that he has been tested with:

  Adobe - Creative Suite 5 Master Collection: System requirements

  Later versions may or may not work.

• How can I use a vector image to stretch with the background in Muse master pages?

  How can I use a vector image to stretch with the background in Muse master pages?

  Click on the 'Fill' text not the drop-down arrow.