Several errors in Final Cut Studio. I just need to reinstall everything?

Hi, I was tolerating a lot of mistakes in my Final Cut Studio edition for a while now, but I decided to try to correct them, because they really get in the way, I listed below...

1. I often get errors of the 'out of memory', especially when rendered. Often I just close Final Cut and re - open, then when I make it works fine. Ideally I would not get the errors at all well. Any suggestions?

2. I use text in my videos, I often put the date at first. I use some plugin text generators that I love. They worked fine for awhile but lately occasionally text randomly goes into random numbers and letters, see the image below, it was supposed to read "February 2016'...»

Again, I work around him, I'll usually just replace the text and it works but I had rather not encounter the error at all, please advise.

3. sometimes, usually while I export with compressor, final cut pro all of a sudden don't stop, no warning or error message, it will be just close itself and I'll lose any work not saved. I work around this problem, but just save often but once again, it's a problem that I could do without. It also blocks the export, I have to start over.

4. as well as the point above, sometimes the export crashes into the compressor without final assembly crashing at all. It stops just export and he said: General error: 0.

5. I also often get a message that reads 'General error' when I use Final Cut, I think that might be associated with the plugins of text once again, but I'm not entirely sure. Usually when I close Final Cut and re - open, the error disappears.

My plan is to uninstall and reinstall Final Cut Studio, but I'm just posting this here to see if anyone can enlighten us.

Also, I have a lot of presets which I don't want to lose in Final Cut Studio, so I wouldn't rather uninstall it but if I have to uninstall, I would like to know what I have to do to keep my presets for example export in compressor settings.

I know that this is quite a big post, but any help is really appreciated, thank you.

Here are the details of the machine...

iMac

21.5-inch, late 2012

Graphics card: NVIDIA GeForce GT 650 M 512 MB

Serial number: DGKKH08LDNMM

OSX Build: 10.9.5 (13F1603)

Processor: 3.1 ghz Intel Core i7

Memory: 16 GB 1600 MHz DDR3

It has the following hard drives...

1.11 to disk fusion, with 692,58 GB of free

10TB external SAS drive, with 2.9 to free

Boot disk 12,01 GB, with 4.65 GB free

I hope that's useful, thank you.

1. This error can occur if you have formats on the timeline in FCP dislikes, such as H.264 or MP4... basically any codec issue not covered by the program. ALSO... This can happen if you stills that are greater than 4000 pixels.

2. what text plugin generators do you use? And there was no image below.

3 & 4... I see that you are running OS 10.9.5. The latest OS fully supported for the FCP 7 was 10.6.8. Each version of the OS after that goes further away from support total and complete operability. That being said, I still use FCP 7 on my machine running 10.9.5, but I lost functionality... Motion and Compressor and Qmaster no longer work.   So well here that is the problem with sending to... compressor Compressor 3.5 provided with FCP does not work on 10.9.5.  You will need to get the latest version... but then FCP cannot SEND to compressor with this version, you need to export a file and then compress him.

5. who can also be linked to the media format used in the project and more than 4000 pixels of still images.

Tags: Professional Applications

Similar Questions

  • Cannot install Final Cut Studio under Snow Leopard

    I get the following warning when you try to install Final Cut Studio (version 3.0):

    ' - Final Cut Studio Installer requires that your system has 128 MB of VRAM; This system has only 0 MB of VRAM.' and

    ' - Final Cut Studio Installer requires that your system has a Quartz Extreme compatible video card. »

    I find it curious as I used to have FCS installed on this machine - but because of the disk hard failure I have done a clean install of the new. I vaguely remember getting hurt when I upgraded to Snow Leopard (years) but there is a solution because the software was already installed. All the suggestions of the community?

    My specs are:

    Mac Pro 1.1

    2 x 2.66 GHz Dual - Core Intel Xeon

    4 GB 667 MHz DDR2 FB-DIMM

    ATI Radeon HD 5770

    OS X 10.6.3

    A Mac OS X Combo update fixed this problem. The computer was not connected to the internet since installing the new hard drive and I remembered that the video card was not the original. So I connected and performed the update of the software and now Final Cut Pro is fortunately installation.

  • Can I install QuickTime 7 Pro with Final Cut Studio 3 keys?

    Hello

    I try to install QuickTime 7 Pro using my old number of Final Cut Studio 3 series/disks, and but could not find a way to do this.

    FCS is not installed on my Mac (long since passed to FCP X) but sometimes I miss the QTP features. I have the original DVD set with FCS3, as well as the serial number, but want to activate the QT7 pro feature set without having to install any FCS.

    Is - it possible, or I have to buy a 'new' for QTP license?

    Thank you and best regards,

    Bottom

    The installation of FCP unlocks the Pro of QuickTime Player 7 features.

    No other way to do it.

  • Where can I find the serial number for Final Cut Studio?

    Where to find the serial number for Final Cut Pro 6?

    The serial number is printed on two stickers affixed to the "Software Installation" booklet which came bundled with Final Cut Studio.

    -DH

  • How can I re-install rtl120.bpl I've read the article on Tune Up Utilities but it's not on my computer, I just need to reinstall it, but all downloads have so far failed.

    How can I re-install rtl120.bpl I've read the article on Tune Up Utilities but it's not on my computer, I just need to reinstall it, but all downloads have so far failed.

    Mike

    I don't think you want to re - install. From what I understand, it is a call to a process which, for which there is no process to the left, most likely a left of Tune UP utilities or similar.

    Run a Malwarebytes scan.

    Malwarebytes.

    http://www.Malwarebytes.org/

    When
    installation, make sure that you do not check the box to install the PRO trial
    Version...

    How to use Malwarebytes

    http://www.bleepingcomputer.com/virus-removal/how-to-use-Malwarebytes-anti-malware-tutorial

    Follow-up to the ADW cleaner...

    http://www.bleepingcomputer.com/download/adwcleaner/

    Do NOT click on the GREEN download button because it will bring only sadness. Use the BLUE

    button just below.

  • Final Cut Studio will not open a project

    I'm working on a project in FCS 6.06.  It has 8 sequences.  Work was fine. Yesterday I tried to open the project and received a message that this project cannot be opened because there's a newer version of FCS.  I did the whole project on FCP 6.06.  How can I open my project.  I have a LOT of hours in this project.  The backup automatically does not open either.  Same message.

    Between the time where that was working the application and the time you tried to open and didn't, you did the changes on your computer? OS updates?

    MtD

  • Final Cut Pro 7 accepts MOV Nikon file format?

    I work with a Mac Book Pro with 10.8 Mountain Lion and I just bought Final Cut Studio 7 and have problems with the function LOG and transfer. I am trying to load an SD card with the films shot with a Nikon 5100 camera with MOV format and a video Compression H.264/MPEG-4 Advanced Video Coding, and it does not work.

    Can anyone help?

    You must first convert the ProRes 422 format images. Use the compressor to do this. And Yes, the size of the file increases by a factor of x 4 or x 5, but that's normal. H.264 is too compressed for FCP 7 to deal with.

  • Final Cut Pro 7.0.3 - filling footage - working perfectly then...

    Hi Mac family,

    I've been editing vlogs for the last month. Everything's fine, everything worked... then...

    I was at the airport and to work on a vlog and bam... all my images have started late. I tried my previous vlogs to see if it was a corrupted file thing, but not... it lags on footage now?

    That's happened?

    I tried free space on my mac and a hard disk, a lot of space... so no was not.

    I tried to change some options for playback, nope.

    Would like to go there and continue to edit, but it's not going to happen with images that lags behind.

    Any help would be welcome!

    Best,

    Max

    You might get more answers by posting in the forum of Final Cut Studio.

    This forum is for Final Cut X.

  • found final cut pro

    I can't update my final cut pro

    Try the FCPro forum:

    Final Cut Studio

    Al

  • Final Cut Pro: The movies stops

    I work with FCP 6.0.6 (iMac - OSX.5.8) for more than 8 years without problems. In the last month I did a few movies (format H264 and fullHD) and I find a few brief stops at the screening. Is it possible that the software is damaged?

    I set cache preferences in the dumpster and repaired permissions, but the problem is still there.

    Please help me because I have to finish a commissioned work.

    ELSA

    Yyou should ask in the forum of Final Cut Studio. This forum is for FCP X, which is a different application.

  • I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?

    I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?  I just want to make a new trailer for the project.

    What you suggest is possible but it takes software and third-party quality loss.

    Instead, export a QuickTIme movie. If you have a choice of codecs, choose Apple Intermediate Codec. You can save it where you want it-maybe in the movies.

    Then import the movie into FCP as a clip.

    Good luck.

    Russ

  • Received a call saying he had several error virus and possible

    original title: guaranteed software

    How long you offer a software guarantee?   New laptop bought late April 2011.  We received a call from Echo?? (Sorry didn't get a full name of the company) indicating the warranty had expired and there were several errors & virus possible.  Of course, we need to purchase a new warranty immediately to keep us protected.  They also stated that they were the only company authorized to sell Windows!  My first thought is that they try to rip us off by buying unnecessary coverage!  I am mistaken and have you heard of this company?

    Hello

    It was a SCAM!

    The OEM which is the manufacturer of your system are provided by your hardware and Windows security.

    In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
    Watch groups. Arm yourself with knowledge.

    No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
    computer. So that's the fraud or scams to get your money or worse to steal your identity.

    Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
    phone calls to help you fix your computer
    http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

    Scams and hoaxes
    http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

    Microsoft Support Center consumer
    https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

    Microsoft technical support
    http://support.Microsoft.com/contactus/?ws=support#TAB0

    Microsoft - contact technical support
    http://Windows.Microsoft.com/en-us/Windows/help/contact-support

    I hope this helps.

  • final cut pro will not load... just wait

    I am trying to load the final cut. It was about 1/2 actually... now it's just says waiting... what should I do?

    HHold Opt - Cmd that you launch the application to reset the preferences. If this is not the case, see if a backup of the library opens.

  • I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR

    I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR, I never had this problem before there was a sort of update that could from cause?

    What is the destination folder that the date be underneath?  In the top right it says users who suggests, you try to put the photos on top of your username instead of under your username.  Maybe that's the problem.  So change your folder in the drop-down list at the bottom right of what it should be rather than users, and if you're going to show us the destination of your photos at least scroll through the list of folders down right so that we can see which is the white highlight.

    Here is how mine looks like if I want to put my photos imported under my subfolder users - Steve - photos by date:

  • Final Cut Pro 7 error message

    I use FInal Cut Pro 7-Yosemite OSX and I get this message when I try to play through cross dissolves. It was working fine and then my canvas turned black. After you verify that it was set to picture and RGB, I trashed preferences and now I have a new problem. Anyone know why my movie will not play through these?

    In the upper left corner of the timeline, click the RT button and playback time real value Unlimited and dynamic.

    To disable the warning, which is not relevant to you unless you change to output to tape, go into the Final Cut Pro menu > preferences user under the general tab, uncheck the box for report dropped images during playback:

    MtD

Maybe you are looking for

  • Maps app

    Previously, you could search directions between two locations on the Maps app by entering in these places. This possibility seems today disappeared and directions are only available between your current location and your destination. How you search f

  • Mac stop overnite on reboot it takes up to 3 minutes, this is a 2014 5 K 27 "4 GHz I7 with an El Capitan

    Mac stop overnite on reboot it takes up to 3 minutes with a black screen, it is a 2014 5 K 27 "4 GHZ intel i7 El Capitan

  • Limited positions

    I am interested to be a moderator to tell me if I can remove a restricted position.  If it can be removed because you do not want the post upwards it then I have no problem with the deletion.  I have not found anything wrong with the post when I put

  • Photosmart 5510 e - all-in - One: Photosmart 5510 - scanning with iMac does not work

    After you have reinstalled the SW printer via the home network, the scan function is not visible when I opened the printer on my iMac. After the first installation has worked well. Then I had to reinstall all the SW on my Mac, so I lost the first ins

  • Change the key sticking Equium M50-164

    Hello I have an irritating problem with my laptop Equium M50-164. The computer thinks that is continually pressed the shift key, i.e. types on alert of the key uppercase, sticky.Any ideas how to solve this problem. With respect to the mark.