Several Instances ID using unique configuration files?

Similar Questions

• pre-defined types of missing data when using a configuration file

  Hi all

  I recently installed Labview signal express 2011, including the audio wizard and vibrations. I got a file preset to implement the material I have but when I open the configuration file (a Labview project file) I get a message:

  Version of installed components are not compatible with the version of LabView express signal 2012. Please install the latest version of the following:

  "SV express datatypes.

  I do not have Labview signal express 2012 so I do not understand why this error pops up. I also have difficulties in locating the mentioned software

  Please notify

  Hi Yogev_sharvit,

  There is not a way to save the files to a previous version of the Sound and Vibration Assistant. I encourage you to contact SAGE, who was the source of the files, and whether they have a 2011 version available. Otherwise, it may be necessary to configure the steps in the wizard. I've included a screenshot of the file opened below. Unfortunately, this does not bring as much light on the different steps that we would.

• Configuration files

  Hello

  I want to use the configuration files to define a process of test script. Each [section] would be piloted and each key would be a parameter. How can I get the INI file to read if the number of sections/key is not known? The reader does not know how many tests [Sections] is enclosed in the INI file and the number of parameters [key] can also vary...

  Thanks for any help...

  Electrostatic...

  Use "get section names" and 'get the names of keys' as shown in the snippet below

• change the value of the location attribute in db jca file with the configuration file

  Hello

  How can I change the value of attribute of 'place' in the jca adapter db file by using the configuration level if possible?

  I have the database map file where the first two lines are:

  < name of the adapter-config = "getParty" = 'Database adapter' adapter wsdlLocation = "getParty.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">

  < connection-factory location = ' ist/DB/CRP1"UIConnectionName ="crp1_apps"adapterRef =" "/ >

  ...

  I need to replace the configuration file

  EIS/DB/CRP1

  with

  EIS/DB/DEV

  but this isn't the case. I think that I am not referencing correctly but I don't know how he is correct, that I couldn't find examples for composites and wsdl content, JCA file.

  Please share the idea.

  Thank you

  Anatoliy

  Anatolly salvation,

  You can assign a new value to the property of JCA by using either the Ombudsman as BPEL.

  Pick click entitled value option and add the right attribute to the property JCA jca.db.DataSourceName.

  In BPEL will zoom click the invoke for the DB adapter, go to the Properties tab and add the right attribute to the property JCA jca.db.DataSourceName.

  (edit)

  If you want to use a configuration file to set the value, I suggest a BPEL property, the value can be replaced by using a configuration file and can be assigned to the JCA property using ora: getPreference ("prefName as string");

  When you use a mediator does not have a preference, and you can use a placeholder that you change when you compile the SCA composite. With ANT in combination with hudson, you can easily replace the value (hard) by the environment.

  See you soon,.

  Robert van Molken

  Specialist of the integration of Oracle

  Post edited by: robertvm

• I want to see the VM configuration files

  Hello

  I want to see the VM configuration files. Can you explain it please with screenshots.

  Kind regards

  DJ

  Hello

  The links provided of Andrew are good and explains a lot of things and hope that the below a will also help more...

  If you want to display your virtual machine using GUI Configuration files, and then follow the steps below

  1. connect to your customer VI or Vcenter and identify the virtual machine that you want to display the Configuration of the 'Search' tab in the right-hand

  2. When you have found the right VM, go to the settings and find on what data store, it is present and go to these data, store and right click on that and select Browse the data store

  3. Select the folder with the name corresponding to your virtual machine name, and you will be able to find all the files that you see in the attached picture.

  If you want to display your virtual machine by using the CLI Configuration files, and then follow the steps below

  1. connect to ESX using the Console used in your environment (for example: Putty) with your root and PW id (or your existing access)

  2. Once you log in, go to "cd/vmfs/volumes" (commonly used way... can also vary)

  3. as you know from the data store, type 'cd datastorename' and you have the list of virtual machines that you had in the GUI, and then select the virtual machine using the same "vmname cd.

  4. Once you're in the virtual machine, use the ls command and you can view all the files in it

  5. If you need more information on ls you can use the link below

  http://www.computerhope.com/UNIX/ULS.htm

  Hope 2 modes above helps you to better...

  Chavigny$ $$

  "Life is boring without challenges & risks taken in daily life.

• need me an Adobe license to generate unique PDF files using iText 2.17?

  Hello

  
  

  We are building a web business application using iText v2.1.7 (Apache 2.0 under a free license) which generates unique PDF files, containing a dozen of text to fill in fields. Each PDF files are different by using multiple text labels, ensuring uniqueness.

  Each instance of the PDF file is sent to a single recipient, the recipient fills text fields, print the document and signs the document.

  Subsequently, the paper is placed in a workflow outside of our company. This workflow produces a unique XML file that is sent to our internal workflow.

  My question is: do we need to license Adobe Acrobat Reader, and that is the license appropriate for us?

  
  

  Thank you!
  

  You do not use any Adobe technology. Adobe do not claim that all rights to the PDF generators that do not use their technology - PDF is a public ISO standard.

  In fact, the use of Acrobat Reader and Acrobat is prohibited on a web server, but fortunately it does not apply because you don't need.

  Your end users will need Acrobat or Acrobat Reader or another PDF reader. But the licensing of your software to end users is their own interest (unless you manage their business, in which case you may need a license for the redistribution of the reader).

  However, although it is off topic, I can't really recommend basing a business on the old iText 2 just application because it's free. See Sales FAQ | iText Software, "WHY I shouldn't USE ITEXT 2.X (OR ITEXTSHARP 4.X)?". It could be the weak link in your solution, and you would have yourself locked out of commercial support.

• Using an automatic configuration file to create bookmarks

  I use an example provided by Mike Kaply to change my automatic configuration file to add bookmarks to the profiles of the users. However, whenever I run FF, instead of bookmarks should be replaced, I get an extra game. So after 5 revival, I have 5 sets of bookmarks that I added.
  Is there a way to avoid this?
  Here is the code I use:
  Add bookmarks
  Components.utils.Import ("resource://gre/modules/Services.jsm");
  var uri = Services.io.newURI ("http://mike.kaply.com", null, null);
  var navBook = Components.classes["@mozilla.org/browser/nav-bookmarks-service;1"].getService(Components.interfaces.nsINavBookmarksService);
  create new folder
  var FolderId = navBook.createFolder (navBook.bookmarksMenuFolder, "New folder", 0);
  Add bookmark to newly created folder
  navBook.insertBookmark (SCCCFolderId, uri,-1, "Mike's Blog");

  In the end, I had to write code using a loop with an if statement then look for an existing bookmark. Of course it's a little more complicated than that.
  It was not easy, but I am able to do what I have to.

• Cannot deploy when you use the FPGA configuration file

  Hi all

  I'm new to NI Veristand. We use a controller NIPXI 8108 with a map of FPGA OR 7841R. Is the used chassis OR PXI 1042 q. VeriStand does not deploy, when we try to add the target FPGA. For adding, we used the default for NOR 7841R provided with veristand FPGA configuration file. The error is attached! Without adding the FPGA target, we are able to deploy.

  We programmed with LabVIEW FPGA card and it works.

  Please help us!

  Thank you

  SID

  Hi Sid

  This is because the FPGA card is not connected through the chassis

  Right click on the (unidentified) PXI system and identify as PXI 1042 q.

  Right-click on the PXI-1042 q system and identify the PXI-8108 controller.

  Then it will automatically fill the devices under the controller

  Now try to deploy again. It will work

  -SID

• Reading Configuration files using Labview RT in a Compact RIO

  Hello

  I am very new to Labview RT/Compact RIO development platform and happen to have a question. I will develop an application in Labview RT / FPGA that will make several simulations. However some these simulations can produce different results depending on the configuration settings. Our systems generally run in a Windows application, were there is a configuration (usually in XML format) file that the application reads and analyzes the given parameters. I was wondering if there is something similar, that I can do it, in which I have a configuration file that can be read before my Labview RT/FPGA application initialization, to change the simulation.

  Thank you

  Mario

  Hi Mario,.

  That's right, there are screws for the files .ini on real-time targets.

• Clone several nodes and appl_top shared using the XML file backup

  Can I use work save file of application context to repeat the clones and avoid to perform following steps:
  
  -Configure the node C (run '"perl adclonectx.pl sharedappltop contextfile = < context of Applications for the existing node file >' and ' perl-I < AU_TOP > / perl txkSOHM.pl"orders ")
  
  If I work the previous clone XML, I would be able to use the same XMl file for re - clone without implement shared appltop and add a node step. Please, share your ideas.

  ma_apps wrote:
  Can I use work save file of application context to repeat the clones and avoid to perform following steps:

  -Configure the node C (run '"perl adclonectx.pl sharedappltop contextfile =' and 'perl - I /Perl txkSOHM.pl"orders)

  If I work the previous clone XML, I would be able to use the same XMl file for re - clone without implement shared appltop and add a node step. Please, share your ideas.

  You should be able to use it. However, according to the Oracle docs support is to clone the main node and add more nodes by cloning the context files.

  Cloning Oracle Applications Release 11i with rapid Clone [ID 230672.1]
  Sharing the Application Tier file system in Oracle Applications Release 11i [ID 233428.1]

  Cloning Oracle Applications V12 with rapid Clone [ID 406982.1]
  Share Application-level file system in Oracle E-Business Suite Release 12 [384248.1 ID]

  Thank you
  Hussein

• Can I use several nulls in a unique key column

  Happy Pongal (SANKRANTHI) friends hi... Can you please help me in this regard...
  
  Can I use several nulls in a unique key column?

  Yes you can have

• The configuration files are used to create this cache server?

  I start a cache server by running the $COHERENCE_HOME/bin/cache-server.sh file. But I don't how it is configured.
  The configuration files are used to create this cache server? How do I know?
  I check the contents of the cache-.sh file.
  In my view, the config.xml file - cache-coherence, consistency-pof - config.xml file and leader tangosol-coherence are used, no?

  After the start of a cache server, view the output carefully and you will find the configuration files are used. For example, the configuration files are displayed in bold background in the following text:

  F:\coherence\coherence\bin>cache-server.cmd
  java version "1.6.0_16"
  Java(TM) SE Runtime Environment (build 1.6.0_16-b01)
  Java HotSpot(TM) Server VM (build 14.2-b01, mixed mode)
  
  2009-11-30 22:46:06.468/1.547 Oracle Coherence 3.5/459  (thread=main, member=n/a): Loaded oper
  ational configuration from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/ *tangosol-co*
  *herence.xml"*
  2009-11-30 22:46:06.484/1.563 Oracle Coherence 3.5/459  (thread=main, member=n/a): Loaded oper
  ational overrides from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/ *tangosol-cohere*
  *nce-override-dev.xml"*
  2009-11-30 22:46:06.500/1.579 Oracle Coherence 3.5/459  (thread=main, member=n/a): Optional conf
  iguration override "/tangosol-coherence-override.xml" is not specified
  2009-11-30 22:46:06.500/1.579 Oracle Coherence 3.5/459  (thread=main, member=n/a): Optional conf
  iguration override "/custom-mbeans.xml" is not specified
  
  Oracle Coherence Version 3.5/459
   Grid Edition: Development mode
  Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
  
  2009-11-30 22:46:07.468/2.547 Oracle Coherence GE 3.5/459  (thread=main, member=n/a): Loaded c
  ache configuration from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/ *coherence-cach*
  *e-config.xml"*
  2009-11-30 22:46:08.515/3.594 Oracle Coherence GE 3.5/459  (thread=Cluster, member=n/a): Service
   Cluster joined the cluster with senior service member n/a
  2009-11-30 22:46:11.765/6.844 Oracle Coherence GE 3.5/459  (thread=Cluster, member=n/a): Creat
  ed a new cluster "cluster:0xD7DB" with Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.1
  68.0.8:8088, MachineId=26632, Location=site:localdomain,machine:host1,process:1060, Role=CoherenceSe
  rver, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) UID=0xC0A800080000012548585
  C6D68081F98
  2009-11-30 22:46:11.796/6.875 Oracle Coherence GE 3.5/459  (thread=Invocation:Management, member
  =1): Service Management joined the cluster with senior service member 1
  2009-11-30 22:46:12.515/7.594 Oracle Coherence GE 3.5/459  (thread=DistributedCache, member=1):
  Service DistributedCache joined the cluster with senior service member 1
  2009-11-30 22:46:12.593/7.672 Oracle Coherence GE 3.5/459  (thread=ReplicatedCache, member=1): S
  ervice ReplicatedCache joined the cluster with senior service member 1
  2009-11-30 22:46:12.609/7.688 Oracle Coherence GE 3.5/459  (thread=OptimisticCache, member=1): S
  ervice OptimisticCache joined the cluster with senior service member 1
  2009-11-30 22:46:12.625/7.704 Oracle Coherence GE 3.5/459  (thread=Invocation:InvocationService,
   member=1): Service InvocationService joined the cluster with senior service member 1
  2009-11-30 22:46:12.625/7.704 Oracle Coherence GE 3.5/459  (thread=main, member=1): Started De
  faultCacheServer...
  
  SafeCluster: Name=cluster:0xD7DB
  
  Group{Address=224.3.5.0, Port=35459, TTL=4}
  
  MasterMemberSet
    (
    ThisMember=Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.168.0.8:8088, MachineId=266
  32, Location=site:localdomain,machine:host1,process:1060, Role=CoherenceServer)
    OldestMember=Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.168.0.8:8088, MachineId=2
  6632, Location=site:localdomain,machine:host1,process:1060, Role=CoherenceServer)
    ActualMemberSet=MemberSet(Size=1, BitSetCount=2
      Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.168.0.8:8088, MachineId=26632, Locat
  ion=site:localdomain,machine:host1,process:1060, Role=CoherenceServer)
      )
    RecycleMillis=120000
    RecycleSet=MemberSet(Size=0, BitSetCount=0
      )
    )
  
  Services
    (
    TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=192.168.0.8:8088}, Connections=[]}
    ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.5, OldestMembe
  rId=1}
    InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1}
    DistributedCache{Name=DistributedCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCo
  unt=257, BackupCount=1, AssignedPartitions=257, BackupPartitions=0}
    ReplicatedCache{Name=ReplicatedCache, State=(SERVICE_STARTED), Id=3, Version=3.0, OldestMemberId=1
  }
    Optimistic{Name=OptimisticCache, State=(SERVICE_STARTED), Id=4, Version=3.0, OldestMemberId=1}
    InvocationService{Name=InvocationService, State=(SERVICE_STARTED), Id=5, Version=3.1, OldestMember
  Id=1}
    )
  

• How can I stop Windows 7 open several instances of a .txt file in Notepad?

  If accidentally, I try to open a second instance of a .txt file in Notepad, I want Windows 7 to remember that another instance is already open.

  It was, in Windows XP, whenever you tried to accidentally open a second instance of a .txt file in Notepad, you would get a message that will tell you that another instance was already open. However, it seems that in Windows 7, you can have multiple instances of the same .txt file open in Notepad (without getting any notification). It is confusing because I tend to make changes to one of these instances given, and when I save one of these cases, I eventually overwrite the changes on other instances.

   
  How can I stop this from happening? I can't turn on a pop-up message in Windows 7 that reminds me that another instance is open? Can I change a setting in my Notepad file to prohibit the opening of multiple instances?
   

  Hello

  
  Opening of multiple instances of the same file in Notepad is by design.
   
   
  Give us your comments for Windows 7
  http://mymfe.Microsoft.com/Windows%207/feedback.aspx?formid=195
   
   
  Thank you

• How can I use the configuration xml into native c + c++ file / qml

  I want to use a config file xml in my app.but I don't know what path should I place my xml file, and how to read it.how to get the path...

  of course, you can put the XML into your project. But why would you do that?

• Says "Select another player file History" (after several months of use)

  I've been using history files with an external hard drive since obtaining my laptop Windows 8 at Christmas. Today, I get the message:

  Select another drive of history file - history of files can not save copies of all your files due to limitations with file system of your historical record of files. Press or click to select a different drive.

  The external hard drive has franco total departure 330 GB 40 GB. I know it uses the FAT32 file system and have a few ISO images that are more than 4 GB, so I removed those but still not the problem. There the error logs that I can look to see if there is a particular directory file/long path? Any other ideas?

  Thank you

  Chris

  Hi Chris,

  Try to convert the external drive to NTFS file system and check if the problem persists.

  These are the ways to convert to NTFS

   

  Method 1:

  Conversion to NTFS using Convert.exe

  (a) of the type command prompt on the start screen, according the the search results right click on command prompt and select run as administrator

  (b) in the command window, type help convert , and then press ENTER. Information on the conversion of FAT to NTFS volumes are made available, as shown below.

  

  Method 2: To convert a volume to NTFS from the command prompttry as follows:

  (a) of the type command prompt on the start screen, from the search results right click on command prompt and select run as administrator.

  (b) in the command prompt window, type: convert DriveLetter: / FS: NTFS

  For example, type convert D:/FS: NTFS would format drive D: with the ntfs format. You can convert FAT or FAT32 to NTFS volumes with this command.

  Important When you convert a drive or partition to NTFS, you cannot just convert it back to FAT or FAT32. You will need to reformat the drive or partition which will erase all data, including programs and personal files on the partition.

  You can refer to check your drive historical files errors

  You can also try the troubleshooting steps of:

  What happens if something is wrong in the history of the files?

  Please post with the State of the question.