Several problems with the Satellite A100-569

Similar Questions

• Sound problems on the Satellite A100 (PSAA8)

  I constantly have sound with my Satellite A100 (PSAA8) computer laptop problems. While I hear the windows starting noise and beeps (most of the time), I hear no sound of things like Media Player, CD, DVD and iTunes. I get the following Media Player error message: "Windows Media Player cannot play the file because there is a problem with the audio device... ».

  I have the standard pre-installed Realtek sound thing on my laptop that could be the problem, well in control panels, sounds, he says it works well. Also in Control Panel, sounds, most of the things are greyed out, so that I can t adjust the volume levels or even play sound noises.

  I tried to download a newer Realtek driver from Toshiba support center to see if that's the problem, but I don't know what to do with the zip file of the suggestions? Please, please, please can someone help?

  Thank you
  Marc

  If please don't post twice and follow your first thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22313

• Blue screen with DVB - T USB TV tuner comes with the Satellite A100-165

  Hi all

  I have the Satellite A100-165 with PX1211E - 1TVD USB DVB - T TV tuner (TV savvy). I think the installation is OK because I can watch TV on my PC!

  But occasionally PC reboot with blue screen! :-((Je pense qu'il lorsque le niveau dele de signal TV est inférieur)
  I update the driver warned with the version I found on the Web from Toshiba site: savvytv-udvbtt - 10180629.zip
  But it's always the same!
  You have an idea about this problem?
  I can agree to have a bad display when the signal quality is lower, but it is very annoying to often have a blue screen and PC reboot!

  Thank you in advance on your help
  Best regards

  Hello

  I think that this can be corrected with the latest display driver. Please visit the Toshiba download page and install it.

  If the problem is fixed, please write again.

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• For Portege 3490 AC adapter does not work with the Satellite A100-159

  I have a supply of 15V 120W car (or plane Kensington). It works very well with a Portege 3490CT. It doesn't do a thing with my Satellite A100-159 new. The power supply provides also 15 V 6 a. Can someone tell me why the Kensington work?

  Or does anyone have a diagram to a power supply adapted myself, preference of 11, 5-14, 12(4) and 24 VDC (23-28: 8)?

  Thanks in advance!

  Hello

  I can give t you an answer why it does not work but usually you need to use the adapter for vehicle recommended by Toshiba. Incorrect adapter may damage the laptop!
  I think that the card for Portege 3490 adapter is not compatible with Satellite A100

  That the two car/truck/Air 120W laptop charger must be compatible:
  PX1237E-1NPO
  PX1235E-1NPO

• SEVERAL problems with the new X 34

  So, I have been active during the overclock.net forums concerning the many problems I am having with my X 34.

  Long story short, I'm back this thing to Newegg and waiting for another delivery. But I thought I'd come at least here because it has high liklihood to return to anyone who cares to Acer. I called their tech support to let them know about the issues, but when the old Indian robot for 2 years at the other end kept referring to as resolution of refresh rate, I decided that I couldn't take more.

  So I took delivery of the monitor yesterday and he initially worked well... but the longer he stayed, the more problems, he has developed.

  My system is one I built a year or two ago and works perfectly with my Dell 3008WFP. Video card is a brand new MSI 980 Ti Lightning. Operating system is Windows 10 x 64. Is a Corsair 750W POWER supply. 16 GB of DDR3 RAM.

  I even made a COMPLETELY new install of Windows 10 on this computer to try to resolve these problems. Did not work. I have disconnected/reconnected everything inside my computer, including RAM and GPU. Did not work.

  And Yes, G-sync is enabled in the NVCP. And Yes, I manually set the refresh rate in the NVCP in correlation with the manual settings on the monitor.

  Problem no. 1: Menu recording does not settings

  -Don't know what the problem is here. But for about 3 hours last night, my monitor would not save settings for serger refresh rate. I would go on the menu... allow the serger... Set it to 100 Hz... Select "Apply and restart. Then (here's the interesting thing I think in hindsight), the screen would flash many colors several times and restart. I assumed that flashing color was normal... but it was never the Predator Logo when it has been reset. The office is finally pointing upwards and I could choose 100 Hz in my NVCP... but when you returned from the settings menu, Overclock was Off back with the default refresh rate. I have nothing would fix it with the reset of the monitor and unplug. Later... I have unplugeed the monitor for 30 minutes and when I plugged it back in, it would save my overclock settings now. It is interesting, but now, when I selected "Apply and reset", he would show the Predator logo when restarting... this logo did not appear before.

  Problem #2: Flashing screen

  -See a video of this question HERE

  -This developed before my eyes. After the initial installation of the monitor, it worked fine. Without no flicker, no problems. But as I was sitting at the dinner table last night, I started to see the monitor flashing intermittently in the other room. I look at the screen, he flickered about 4 or 5 times per minute. For the next hour, he progressed to 30 - 40 times per minute. And subsequently developed in constant blinking. BUT this flicker only happens when I go to the Office at 100 Hz. It happens sometimes in games, but not constant.

  I first thought that I had a bad cable of DP since I used one from Amazon, if I swapped it for the Acer cable included. Nope... same problem. I even inserted my previous EVGA 780 TI... but the flicker that happens too.

  Then, I thought it was a driver problem, I did a clean install of the nVdiia previous drivers. Nope. Then a cleaning installed latest drivers from nVidia WHQL. Nope.

  Then I saw here that you can download the drivers for the monitor directly from Acer. So, I did a guy like an unsigned driver installation. Nope.

  After all this, the problem persists.

  Strange thing about this one is that there was when I first got the monitor but got progressively worse since I got it.

  Another weird thing is that if I have a window open, then it isn't twinkle... reduce the window, and he comes back. It's actually what made me think, it was a driver issue, but as you can see above, I think that I have ruled that that fully.

  Also, if I set my refresh rate to 95Hz or below, the problem occurs. (This is actually how I currently work).

  -UPDATE: the issue has actually started just after executing i1Profiler to calibrate the screen several times back to back. I can't imagine how, but could the rapid exchange of multiple colors full screen damaged electronics somehow? Or is it just a weird coincidence?

  -UPDATED #2: it was suggested that ADC can cause the problem as it caused problems with the previous Acer monitors. So I completely deleted i1Profiler and reset my default .icc profile. I also think that I figured out how to do a monitor factory reset - if you hold the buttons first and fifth, restarting the screen and all the default settings. in any case, does too and the blinking persists...

  #3 problem: Backlight horrible bleeding

  I have to type anything here? Leave some pictures to speak for themselves...

  

  

  Trouble #4: Parts of the screen does not not on

  It has been described elsewhere, so I won't detail it here. But yes, I have the same problem. Here is a representative of my monitor picture when the issue arose.

  

  Overall, I am extremely disappointed, although I can't say I'm surprised. I mean, we deal with Acer here guys... Not exactly known for the high-end products. You can put the red lipstick on a pig...

  So is there more any idea or suggestion out there?

  Until then... I'll wait for my new X 34 excerpt here from Newegg to see if I won the lottery of Acer he...

  I created this post to be a "accepted solution" to this thread with the purpose to help other users who need to find the answers. This should help to find this information faster than to have to go almost 800 posts to find pieces of information.

  Wake up from sleep (backlight) - initial response and follow-up

  Problems with Overclocking at 100 hz - original response

  Coil - Whine Original response

  Color banding - users in Australia reported the problem. The teams in the region to THE have been notified and a firmware is available.

  -Scanning lines Original response

  Thank you
  Cory

• Problems starting with the Satellite A100-662

  Hello

  I appeal to your jurisdiction after a first contact with the Toshiba support on the phone.
  My problem is the following: your computer Satellite A100-662 begins at random, sometimes it starts the first time, and other times it starts only partially sighted power and ignition in market, drive hard s ' lighter than 1 second, the fan runs but the screen remains black.
  To start, I tried several things, I had read on the Internet: removed / delivered the battery; power supply only. removed / delivered the same RAM and hard drive.
  The Toshiba support me make an initialization of food and a BIOS upgrade. I also set the fan but no improvement!
  Because I noticed something by chance: the computer does not start, I tapped on the lower right corner of the computer, and it started but not on the screen. I turned off the computer, and then I'm turned again... He has started!
  What do you think?

  Thank you.

  Hey Buddy,

  first of all: THIS IS a USER FORUM

  That means, Toshiba bed tie this messages or give any kind of support. So, please Don t think that one of Toshiba will call you the next day and give you press your problem. Be prepared to discuss with other users to solve your problem and get some knowledge from other users here autour.

  Regarding your problem:

  I think you have some hardware problem that must be fixed by a partner certified. I guess that an electronic part of the motherboard of your computer does not work correctly and from causes of this boot.

  In your case, I would follow this [LINK: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871], find the nearest authorized service partner in your country and ask them a health check of material.

  That's all, good luck...

  Welcome them

• Problems with its Satellite A100 and professional cards

  Hi all

  I bought an A100 Satellite less than a year ago and have had problems with 2 different business cards when using Cubase.

  -M-Audio firewire solo plugged into the TI PCMCIA card
  -Echo Indigo io (PCMCIA card)

  I am running Windows XP and Cubase SE/SX3. When running Cubase, there are cracks, the sound stops for a few milliseconds.

  I've never had any problems with my old Toshiba laptop Satellite Pro A40. It's very disappointing and frustrating. I use my new Toshiba for the Internet!

  Could someone help?

  See you soon,.
  Fred

  Hello

  This has been discussed in several topics, so please visit the following positions and get something for yourself:

  This one has a driver and registry solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18720

  But first, I recommend you to read this one:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18631

  It s long, so be prepared to read a lot. Hope you can solve your problem.

  Concerning

• Several problems with my Satellite A200-1QZ

  Hello

  I'm sorry to open a new thread, but I already looked around for awhile and has failed to find the answers I need.

  Since I have several different problems, some of which are probably unique, I thought I might as well start a new thread.

  So lets start with the less important bits and get more important issues to light:

  1)

  I have some problems with my FN keys. While it seems that I can use some of them (FN + ESC, F1, F3, F6, F7, F10, F11, F12) there are also some that I can't use FN + F2, F4, F5, F8, F9, basically.

  How is it that some work and some do not, and what I need to do to get them all to work again?

  2)

  There are times, when the my screen goes black suddenly while I work, play or surf.
  This does not appear to be linked to specific programs or something, it happens completely at random.
  Sometimes it doesn't happen for weeks, sometimes, it happens two times a day.

  Normally this does not really pose problems, since all I had to do was turn the idle mode (power-led flashes orange), log in again and everything worked fine.
  But unfortunately 3 problem, so it no longer works.

  3)

  When I click on the power button - or even chose standby mode via the menu stop - the laptop won't "idle" mode, but the screen goes all black.
  As soon as I move the mouse or do something else, I wonder you connect again, so instead of the idle mode the laptop seems to go in sleeping mode.

  The main problem is that this sleep mode is not sufficient to treat the problem 2, so ultimately, my screen goes black and all I can do is to close completely by holding the button power for 5 seconds.

  Sorry for my English is not my mother tongue. Thanks for all the help in advance.

  Greetings

  Hello and welcome to this forum of technical support.

  I'm not an expert but will try to help you.

  # I put t know what operating system you use, but try to please install or reinstall Toshiba Value added Package.
  # Huh... never heard of something like this and this in standby mode is the solution to this. It means books works as usual but the display is suddenly black?
  # It is not easy to say what the problem is here. You can use Hibernate mode properly?

  By the way: are all hardware components installed correctly (Device Manager)?

• A few problems with the Satellite U920T-100

  Hi guys,.

  my girlfriend ordered a Toshiba Satellite U920T-100 about three months ago and she had problems with it since. We're not quite sure what causes because they seem to happen randomly.

  The questions are:
  -It starts, but it freezes at the Win8 connection with a blue screen (a rather hot blue, no blue screen of death)
  -It starts not at all, only after a few attempts
  -It will not stop
  -It freezes all by organizing files (for example copy of files from A to B, but not yet large amounts of files)

  New: these questions seem to be completely appearing randomly, I wasn't able to reproduce them in any way.

  Also: WLAN connectivity is really bad.
  The laptop is not able to find networks, while my laptop has no problem with it.
  And when he finds them and connect, the connection be lost - once again: no idea why.

  That surprises me the most, because in tests and comments that I've read that connectivity has been praised everywhere.

  I have reset factory?
  Run through some specific tests?
  Or is is hopeless, because there are so many problems with it?

  I'd appreciate your help!

  Hello

  > I should factory reset it?

  I think you should do that because the issue described can be related to system problems, but also hardware problem (HARD drive for example). The resumption of the factory allows you to check if its software or hardware related problem.

  Usually, all the problems of software (System) could be solved by the recovery process. Hardware problems would continue.

  From my point of view, the recovery of the system is the first step, you should try to solve the problem.
  In case this is not enough, a hardware problem (RAM or HARD disk) is possible, and given that the laptop is still under warranty, I recommend you contact the service to check the unit.

  Hope my advice might help you a bit

• Connection problem with the satellite C660 - 24L

  Hello world

  I have a Toshiba satellite c660 - 24L running windows 7 and have had a problem with internet connection in the last two days.

  Marketing, the internet works very well for around a minute and then I lose the connection. The computer says still connected but the network map displays a problem between the computer and the Wi - Fi router. After that restart the internet works fine again, and then disconnects after ~ 1 min.

  A few times, the computer froze, and gave me a blue screen and memory dump, and then a forced restart.

  Computer behaving the same way when connected and disconnected from the mains.

  All other devices will connect to the router talk-talk with no problems.

  Any help is appreciated, thank you in advance.

  Lewis.

  Post edited by: lewlew

  Have you noticed a few problems if you use the local network connection?
  Original Toshiba WLAN driver is pre-installed on your computer?

  To be honest, it is not easy to say why this show is starting to happen so suddenly.
  Try to back up OS to an earlier time using System Restore tool just to see if the problem will still be there.

• Can't connect to Internet with the Satellite A100-234

  Hello

  I have the Satellite A 100-234 but it doesn t work with internet. I put t know what to do. I formatted the computer two times. It's Windows XP by the way and I have LAN DSL connections so I need your help. Pease, what can I do with it?

  I have another computer. It's by Satellite A 100 (VISTA), but his work which is average I put t have a problem with my Cannon.
  I hope you can help me guys. Thank you!

  How did you install the OS on this laptop?
  Have you used the Toshiba Recovery CD?

  If you have not used the Toshiba Recovery CD so are you sure that you have installed all the drivers necessary?

  The network adapter has been properly recognized in Device Manager?

  I would appreciate your comments

• Some problems with the Satellite A210 - 11 p

  I bought my laptop Satellite A210 - 11 p in September last year, but over the few months Ive had some problems with it.

  1. it seems to be overheating to the point of not being able to touch the bottom of the laptop whose total stop me use it as a laptop. Is - this usual?

  2. the screen turns off after approximately 2 minutes after the connection.

  3. any ideas where I can buy a new charger?

  Can you help me?

  Thank you
  Mike

  1 could be an accumulation of dust in the radiator. An FSL can remove it for you, or you can blow with a can of compressed air.
  2 power settings? Perhaps the Toshiba Power Saver is set to decrease intensity when loading in the system tray.
  3. I think an ASP can sell you a.

• Problems with the Satellite A665-11Z

  Hi all!

  I have problems with my laptop, the problem occurs for the most part, any time.
  (start cold upwards) on the screen with the AC is plugged and the battery to connect, the laptop stops receiving power and battery light flashes orange. I re plug the AC several times and this until the battery dies

  which gives it a while it stops then when I play a game (Team fortress 2 to be exact or ETS2) play for about 15-20 minutes until the same symptoms recur...

  I replaced the DC Jack inside the motherboard and the problem persists,

  I have baught a new real charger from ebay

  I also have repasted CPU incase of heating, but is not the issue, as it happened on a cold start upward on the screen it just completely cut to connect.

  I also installed windows 7 ultimate sp1 and update all readers
  I just installed windows 8 pro and updates installed etc.

  I removed the battery of the laptop to see if that was the problem, but it still happens, but obviously there is no battery in the laptop just turns off completely without blinking light orange on the sign of the battery

  The battery is weak it holds for 10 minutes at full load, but this isn't the question why the laptop shuts down with the charger because I removed and still...

  anyone has any idea what it is? :(

  Thank you

  I agree with you that isn't related to malfunction of the accumulator.
  The laptop should work correctly even if the battery isn't inserted.
  That's why I think there must be something wrong with the motherboard or the part connected to the mobo

  However, its really hard to talk about possible troublemakers, because he could make almost any part that affect the functionality of the laptop.

  In the case where the motherboard is affected (a kind of power provide electronic malfunction) repair will be expensive affair because the new motherboard is one of the portable computer expensive parties.

• Problem of the Satellite A100-912 usb external HARD drive

  Please help guys!

  I installed Win 7 32 bit on my laptop Satellite A100-912. Everything works perfectly in addition to having problem reading external usb HDD (disk appears in disk management, but are not accessible). These discs are not defective, because I use them on some other Pcs. Thumb drives are not a problem at all. Tried to use the self-powered USB hub but without success. Not sure if this is a related issue of Bios or a material limitation of this device. Thank you!

  > Everything works perfectly as well as having problem reading external usb HDD (disk appears in disk management, but are not accessible).

  The HARD disk appears in disk management, but you see the additional HDD in my computer?

  I don't know Mr. what could cause this and he s strange that you cannot access the USB HDD, even if it has been recognized correctly
  Maybe you should try updating the chipset driver.
  Chipset driver controls the ports of interface USB/so it of certainly worth a try