Several reports for several operating units

Similar Questions

• List of organizing for the operating unit

  Hi gurus,
  
  I would check how many organizations have been assigned to an operational unit.
  
  Please notify navigation to check by unit operating, is there any report of check in application.
  
  Concerning
  AK

  Hello

  You can check this in the HR_ALL_ORGANIZATION_UNITS table.

  TYPE column will be reference types (i.e. Business Unit, operating unit), and to verify the number of organizations assigned to operational unit

  SELECT *
    FROM org_organization_definitions;
  
  SELECT   operating_unit, COUNT (*)
      FROM org_organization_definitions
  GROUP BY operating_unit
  

  Kind regards
  Guru.

• Several operations to a WSDL or several WSDL

  I need to expose some services of the OSB, (service1Request, service1Response, service2Request, service2Response...), these services are all them should be sent to the same service provider. What is the best solution: create a WSDL for each service or 1 WSDL for all services with several operations? Thank you

  It depends on the Composition of Service strategy you follow, that generally group you a set of operations in a Service.
  I've seen different organizations taking both approaches, i.e.

  1. have a WSDL by operation

  Benefits: More flexible with regard to changes to any operation. You can only change the affected WSDL and make sure that the rest of them are intact.
  Disadvantages: If the number of operations to continue its growth, many WSDL file management will be an overhead projector

  2. several operations as part of a WSDL.

  Benefits: More flexible regarding now the WSDL files and versions of service (like AccountV1.wsdl, count V2.wsdl...) and more alignment to your SOA my point of view
  Disadvantages: If an operation of the WSDL changes then the rest of the operations are (maybe not a features point of view, but the consumption of the new WSDL file) also affected as a new wsdl should be created.

  When you think of SOA, you always talk about Services and not the operations, so finally a given operation should logically belong to a Service and all of the artifacts of the Service to be stored in one place, needs whether a design, WSDL, Code, unit tests, etc...

  An example of such a service is as follows:
  Account services with operations such as Add, Mod, Inq, etc...

  So based on the strategy you want to use, consider the above and make a decision.

  I hope this helps.

  Thank you
  Patrick

• Several operating systems Vista and Win 7 run built in missing bluetooh

  My Bluetooth 2.0 + EDR on Acer Aspire 6920 G installation could not be detected so unable to installed correct driver after that I installed my Windows 7 as my 2nd several operating systems with the original Vista SP2.

  Only the Vista Panel showing always available Bluetooth Panel but icon indicates avail point O. The two managers of device on two BONES indicate unavailability of Bluetooth. What should I do like light blue to the Bluetooth Panel on while the startup process is on the two BONES. I need to have Bluetooth that I intend to install and configure the ACER Xpress VoIP phone.

  Never been resolved with similar problem and what should be done while several operating systems are maintained are successful in all cases.

  Hello

   
  Do you have a code error message when you try to install Bluetooth drivers?
   
  If the Bluetooth feature is built into your computer, try to turn the Bluetooth switch and turn it back on. (This switch cannot be tagged "Bluetooth", it can be combined with a switch that turns your wireless on and outside network receiver also).
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  Check if the Bluetooth services are running on the operating system.
  a. Click Start, type services.msc and press to enter.
  b. in the list of components, double-click Bluetooth support Service.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click on apply and then click ok.
  e. check if the problem persists.
   
  Method 2:
  Install Bluetooth drivers on the operating system on the manufacturer's Web site.
  Reference:
  http://us.Acer.com/AC/en/us/content/drivers
   
  Method 3:
  Since Windows Vista, follow the link and run the fixit.
  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices
   
  For Windows 7, see the link:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Also check out these links for more information:
   
  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions
   
  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-in/Windows7/change-settings-for-a-Bluetooth-enabled-device
   
  Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-in/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices
   
  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-a-Bluetooth-enabled-device
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• WebService with several operations

  Is it possible to have a single statement of WebService with several operations?
  
  I see a tag of operations compared to a tag of operation but impossible to find good documentation about this.
  
  Looks like an ASP.NET WebService (end point defined by a WSDL document) may have several web methods/operations, and therefore the < mx:WebService > tag should support multiple < mx:operation > tags maybe inside a < mx:operations >?
  
  Is it how it works? Is there documentation on this or samples?
  
  I thank in advance
  George

  Ah, so easy it was hard for me to see.

  He thinks it was the mx:operations of Flex Builder drop down type ahead led me to get confused and go down the wrong path.

  Thanks for your reply,
  George

• How to defragment the drive d error: some files on this volume could not be defragmented. Please see the report for a list of these files defragmentation.

  Original title: how to defragment the d drive

  Defragmentation is complete for: (c :)) some files on this volume could not be defragmented. Please see the report for a list of these files defragmentation.   I solve this problem with pagedefrag but same problem with the D: drive. What can I do? is a D: disk defragmentation program at system startup? Please help me :(

  Its a simple but problem ongoing with the pagefile... The hd is in use & cannot defragment parts of it

  because of this, use to defrag times. To fix the files fragmented on any hard drive, open the system

  Properties, performance, advance, the page file, change the button, select the hd, press "no paging file" value

  Enter 2 X, close, restart the pc. Once in xp, open cmd, type: CLEANMGR then select the hd,

  type: Defrag D: D: being fragmented, once through, hd output cmd, return to system properties, set

  the swap file for hd to "let the system manage", click 2 x game, close, you get a couple of windows

  saying: 'replace the file' say Yes close... Sometimes you have to try several, but you will succeed...

• Warning__program error__one or more files necessary for the operation of the memorex expressit label design studio are missing or corrupt. Please use the Setup program to reinstall the software.

  Tried to update to Safari that does not work after the update. Then my printer stop working. Get the following message: 'WARNING '.
  program error
  necessary for the operation of the studio of design of memorex expressit label one or several files are missing or corrupt. Please use the Setup program to reinstall the software. »
  Already uninstalled and re-installed the software manufacturer labels several times. No luck.

  It seems it all started to go wrong after your update of Safari went wong:

  http://www.Apple.com/support/Safari/

  Link above is for Support of Safari.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  We do not know your Label program Vista compatibility.

  Check if your program is Vista Compatible:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It comes with Vista, upgrade install and activate Forum.

  Try the Vista programs Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Directory of different report for each subsequence

  Hello

  My test sequence contains a number of subsequences, representing different tests, which can be run separately.

  When all the subsequences (tests) is selected to be executed by the operator (as "Run selected Tests" and not as a part of "USE Test") I have to save the test report to its specific subdirectory in the reports directory. To do this, I created a variable in StationGlobals, which contains the name of the sub directory and is changed in the configuration section for each subsequence (test), according to the name of the test.

  I am trying to use the following expression as a path to the report file in Report Options:

  "StationGlobals.ReportsDirectory+"\\SN_\\"+StationGlobals.TestSubDirectory+"\\SN_[] []."

  The problem is that the path of the report expression is read before execution of the selected step starts (and the StationGlobals.TestSubDirectory is changed), this is why the report is always saved in the subdirectory of the previously executed test. Any change in the StationGlobals.TestSubDirectory made by the subsequence running will be 'seen' in the next run of one of the subsequences.

  I tried also to change the reports using the ReportOptions Callabck directory, but the same problem stop there as well (is executed before the subsequence selected, changing the StationGlobals, TestSubDirectory to the value of specific test).

  How can I get the name of the subsequence selected for execution in order to build a custom report for this subsequence directory/path?

  Other means will be appreciated as well.

  Roman

  I solved the problem using my custom LabVIEW interface:

  When the report is displayed in the status display window, I send it to a printer. At this point, I read the value of the global variable Station (from TS), which contains the name of the directory in which the report should be saved (this variable has been already changed by the executed subsequence). Then I change the path to the PDF printer, depending on the value of the global of the Station, so that the report PDF file is placed in the correct directory.

• PowerCli script to generate the report for the VM and ESXi model

  Hello

  I'm trying to generate a report for the virtual machines to a domain controller that includes the operating system, Cluster and host of brand and model of ESXi, but for some reason any the ESXi info does not come through. Any help is greatly appreciated.

  Get-data center 'TEST ' |

  Get - vm |

  WHERE-object {$_.} PowerState - eq "Receptor"} |

  Select Name, @{N = "OS"; e = {$_.}} Extensiondata.Guest.GuestFullName}},

  @{N = "Cluster"; E={$_. VMHost.Parent}},

  @{N = 'Esxi model'; E = {Get-VMHost - VM $_.} VM | {{Select model}}

  The virtual machine has the properties of the host.  For your information "Model ESXi" use $_. VMhost.Model, $_ is the current information for pipeline for the virtual machine.  You did for the section "cluster".

• Report for all the mounting points on an OS(EP OPS) comments

  Hello everyone. A hope that someone knew a work around collecting that invited all support information for each operating system. I don't know if this would require a metric Super. But in the views when I select FileServer mount I have to specify the drive and drill down to use to get these statistics for each specific guest operating system. Our report will not look very good if need to add each frame for all Linux servers in the report. And then have an empty seat if the mount is not there on the specific guest operating system.

  Come on in "group by" and select the checkbox of the columns. Then go back to the metrics selector and select a metric which is instantiated (think "space GuestOS |") C:\").. It will add on to the right with an instance name. Click on the name of the instance and assign a group of metric, metric is the metric group that you just added. See attachment.

• Can I customize the forms based on the responsibility on the same operating unit?

  Hello!

  I would like to ask if I can customize forms that are based on the responsibility on the same operating unit? Here's the scenario: order entry form, the descriptive flexfield is disabled on a responsibility more but must be activated for a particular responsibility. In addition, on most of the responsibilities, booking, picking up until shipping are manually, while on a special responsibility, I need to automate these steps.

  Thanks in advance.

  Jon

  Hi Jon,

  Yes. Forms can be customized at the level of the Site, the user, the responsibility.

  For more information, please visit:

  Form customizations in Oracle E-Business Suite (release 12) (Doc ID 395117.1)

  How to make forms of customization (Doc ID 468657.1)

  Information about the ability to customize the form of Oracle Applications 11i (Doc ID 279034.1)

  Limits to customize forms (Doc ID 420518.1)

  Thank you &

  Best regards

  Asif

• Could not load the Mode of operating unit using fndload.

  Hello experts,
  
  I'm migrating a competing using a TDL of an instance file to another program. As you know has R12 of this security feature where you can run the program with the operating unit single or multiple mode. I ran fndload for download the concurrent program to another instance and it ends without error, but it does not affect the operation of the single unit. It has the value null. If someone has encountered this?
  
  Here are the steps I did:
  I copied the XXF5_PO_PRINT.ldt file to $FND_TOP, patch, 115, import directory
  Run the following command:
  FNDLOAD apps / DOWNLOAD < < password > > O $FND_TOP/patch/115/import/afcpprog.lct XXF5_PO_PRINT.ldt PROGRAM APPLICATION_SHORT_NAME = XBOL CONCURRENT_PROGRAM_NAME = XXF5_PO_PRINT

  I ran fndload for download the concurrent program to another instance and it ends without error, but it does not affect the operation of the single unit. It has the value null. If someone has encountered this?

  This is set on the source instance? You can find it in the ldt file? If so, you can modify the ldt and try the same command again.

  In addition, please use CUSTOM_MODE = FORCE or UPLOAD_MODE = options to REPLACE and see if it helps.

  Advice on FNDLOAD [ID 735338.1]
  FNDLOAD Download / Upload of concurrent programs fails to load settings [ID 1101946.1]
  How to manually download the files "ldt" [1092694.1 ID]

  Thank you
  Hussein

• For multiple business unit, we have same logo. How to display in RTF?

  I am very new to BI publisher.
  
  I have create a RTF command that contains the Logo of the operating unit.
  
  Currently, we have 5 operating units. We'd spend logo based on the control unit.
  
  Currently, we have coded something like that
  
  <? If: org = 1? > org1image <? endif >
  <? If: org = 2? > org2image <? endif >
  <? If: org = 3? > org3image <? endif >
  
  for the Org = 4 and org = 5, we want to display the same image. Do we have a logical condition or BI Publisher?
  as
  If (org = 4 or 5 = org)
  4 image display
  end if
  
  
  How in RTF?
  
  Thanks in advance for your answer.
  RK
  
  Published by: vradhakr on November 1, 2010 14:52

  You can use it as you have in your example itself.

• Statistical report for Hyperion products

  If anyone has found a way to gather statistics report for an Interface collide with Hyperion products - Essbase, Planning, financial management.
  
  For standard relational Tables tab of the task of the Session: loading provides # of lines, number of updates, number of inserts, the number of deletions, and number of errors. and these values are found in the repository table SNP_STEP_LOG.
  
  However, with Essbase and planning and financial management that we get is the Message window and this is far from helpful and the SNP_STEP_LOG has no entries for these columns.
  
  So has anyone found a way to get the information from this message?
  
  org.apache.bsf.BSFException: exception of Jython:
  Traceback (innermost last):
  "< String >" file, line 2, in there?
  Planning, writer load summary:
  Number of rows processed successfully: 10
  Number of lines rejected: 0
  
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.k.a (k.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt (SnpSessTaskSqlI.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  at com.sunopsis.dwg.cmd.e.i (e.java)
  at com.sunopsis.dwg.cmd.h.y (h.java)
  at com.sunopsis.dwg.cmd.e.run (e.java)
  at java.lang.Thread.run(Thread.java:619)
  
  
  
  
  
  Thank you
  
  
  Wayne

  Hello

  New procedures (odiRef.setNbInsert, etc.) have been added in ODI 10.1.3.4.2 and above which will allow the statistics should appear as expected. The kms toll-free EPM will be updated to use this new feature, but in the meantime, you can change the KM with the following code.

  Replace the code in step of statistical report or add the step preceding static report of the IKM or LKM will update the operator with the appropriate information.

  statString = stats.toString)
  St = statString.Split ("\n")
  Inserts = long (st [1].split(":") [1])
  Errors = long (st [2].split(":") [1])
  odiRef.setNbInsert (inserts)
  odiRef.setNbErrors (errors)

  Using this code will avoid having to raise an information and error step to view statistics.

  Thank you
  Denis

• New iPhone launched yesterday and I just picked up my iPhone to a lower model earlier this month.  Can I return or Exchange for a new unit which is always on a guarantee?

  New iPhone launched yesterday and I just picked up my iPhone to a lower model earlier this month.  Can I return or Exchange for a new unit which is always on a guarantee?

  If your current iPhone is still within the retailer's return policy where

  you bought it, you can return before the closure of the back window. If

  the return period is passed, then you need to sell your current

  iPhone and use the funds for the purchase of a newer model.

  All Exchange warranty would be for the same exact as iPhone being

  replaced - same color, same memory, same State locked/unlocked.

  Protection guarantee against manufacturing defects and does not

  apply when the owner wishes to change to another iPhone out of warranty issue.