Several subnets on a NETWORK adapter with BladeCenter?
We have an IBM BladeCenter H chassis with switches Cisco 3012. Each blade server is configured with a total of 4-port NETWORK adapter. Our initial intention was to 2 4 network cards for the traffic of the virtual machine and the others, two for tolerance to the failures/vmotion/management team. It has recently been brought to my attention that there is another necessary subnet for some of the virtual machines that will run on these servers. So, my question is, can I have access to multiple networks (10.1.1.x & 192.168.0.x) through two NICs servile mentioned above to the traffic of VMware? Keep in mind it's bladecenter environment, I have the external ports on the back of the chassis of the physical connectivity. All documentation showing this would be the icing on the cake. Thanks in advance.
You should be able to this with trunking and tagging of vlan. This will allow you to pass the traffic of multiple VLANs and label it.
Jason Silva
Tags: VMware
Similar Questions
-
Uninstall the network adapter with Windows 7
I can not connect to internet on my other PC with Windows 7. In Device Manager, I found 9 network cards that I can't uninstall. If this is caused by a virus? How can I remove additional network cards from my PC? Thank you.
Hello Markopx,
Thanks for posting in the Microsoft Answers forum! In order to remove any unwanted network adapters, simplyright click on the network adapter of your choice in the Device Manager and select Uninstall.
Hope this helps J
Adam
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
vmreconfig.pl adding a network adapter with port group
I have searched the net looking for a way to add a network adapter on a virtual machine and specify the port group / name of command line or with vi perl of the network and have found no examples (or change a network map of existing virtual machine port group). Adding an adapter with vmreconfig.pl is easy, but there is no place to set the port group (containing a special VLAN id for the new virtual machine that is just cloned). I am creating a fully automated system and this characteristic seems to be missing or I missed just plan. Can anyone help?
Here is the code which is close to what we use:
#$netname is a string of the name of the network, the host view is the moref of the host that you deploy on
My $net_vm_dev_conf_spec = create_net_device (network-online $networkname name, hostview-online $host_view).
create virtual device configuration for NIC specifications
================================================
void create_net_device {}
my % args = @_;
My $network_name = $args {netname};
My $host_view = $args;
{if ($network_name)}
My $network_list = Vim::get_views (mo_ref_array-online $host_view-> network);
{foreach (@$network_list)}
If ($network_name eq $_-> name) {}
my $network = $_;
My = $nic_backing_info
VirtualEthernetCardNetworkBackingInfo-> new (deviceName => $network_name,)
network-online $network);
My = $vd_connect_info
VirtualDeviceConnectInfo-> new (allowGuestControl,-online 1
connected-online 1,
startConnected-online 1);
My $nic = VirtualE1000-> new (support => $nic_backing_info,)
key-online 9999,
unitNumber => UNDEF,
addressType-online "product."
connectable-online $vd_connect_info).
My = $nic_vm_dev_conf_spec
VirtualDeviceConfigSpec-> new (device-online $nic,
operation => VirtualDeviceConfigSpecOperation-> new ('add'));
Return $nic_vm_dev_conf_spec;
}
}
}
}
#then create a config specification
my new VirtualMachineConfigSpec =-> () $config_spec
deviceChange =>,
);
#Then apply this config spec spec clone or something.
-Matt
VCP, vExpert, Unix Geek
-
Remove a NETWORK adapter with a voltage VM.
Greetings
I note the discussion at this link...
Given the above is a bit old, I was wondering if there was a better way to do it now? It works, although there seems to be a bit of a brute force backend way to do. Because I need to do for the production of 2000 virtual machines I don't want to take any chances, if I can possibly help it.
One of the effects that I found that may be of this method is that the virtual machine occasionally requires a vMotion to solve "configuration not valid for device number '0' when it is tempting to connect offline VMs. NIC
Please can I confirm if there is a better way to allow hot withdrawal of a NETWORK card, and then use the 'normal' way to remove a NIC (Remove-carte_reseau).
Thank you very much!
I'm afraid that the situation has not changed, you should always use the API method.
In fact, if monitor you (with Onyx, for example) what happens when you remove one card NETWORK to a VM under tension from the vSphere client, you will notice that the same method of the API is used.
It is also important to understand that some comments not the OS really love hot-removal of a network card.
On the positive side, they are for most older versions of OS.
-
Single NETWORK adapter with 5 IPs
Hi guys,.
I'm new to ESXI 5.5 and have a question. My server has a single NETWORK card and I got 5 fps by my ISP. I want to run 4 virtual machines on my server. I want one of the IPs to be assigned to the hypervisor and the 4 other IP address to assign to each host.
Is this possible with a single NETWORK card, if so, can someone guide me in the right direction on how to accomplish?
Thank you!
Unless your service provider restricts the number of MAC addresses on the same switch port (your uplink port), there is nothing special you need to do. Simply assign an IP address to the host as well as each of the virtual machines. That's all.
André
-
ESX uses network adapter with the mac address that is different than virtual connect reports
Hi all
Our ESX environment consists of HP C7000 enclosure, virtual connect 1 gb ethernet with a mixture of BL480c and BL460c. We just bought some new BL460c G7 with NIC NC553i to replace some of the oldest BL480c. We have configured Virtual Connect to assign mac addresses. In vc management consoleI see the addresses assigned to the server, but when I start the server displays a different mac address for nic #2 that vc does. NIC #1 has the same mac address of console management vc and in the server BIOS. When I install ESX also sees the 'wrong' for #2 nic mac address. According to vmware nic #2 has not any network connected to what should be if it was really nic #2 (according to the vc management console).
When I look at the mac addresses in the BIOS none of the network interface card have the mac address assigned by vc. VC firmware is 3.01. I have attached the photos I see information in the management of VC and BIOS console. Someone at - it for clues to what is happening and how can I solve it? Thanks in advance.
Kind regards
GB
Please refer to:
Note: The ESX host uses following addresses starting with 00:50:56 (as opposed to the address embedded in the interface itself).
To determine the MAC address of the interface Board of the ESX host, run the command:# ifconfig | grep-i hwThe output looks like:vswif0 Link encap HWaddr 00:50:56:41:5 A: 59The MAC address is in the first line after HWaddr. In this example, the MAC address is 00:50:56:41:5 has: 59.Note: The ESX host uses following addresses starting with 00:50:56 (as opposed to the address embedded in the interface itself).You can also review the output information and the esxcfg-NICS - l order MAC addresses. -
Linksys Wireless - G PCI Network adapt with sharing SpeedBooster (wmp54gs) problems
Trying to route internet even if the computer to my xbox but there's no sharing tab under the properties of devices. There are in my connection to the local network. just need to know how to turn on sharing. operating system 32 bit vista
Yes, you can I understand it. I have uninstall my wirerless adper and then reinstalled. the sharing tab and then he got to work thanks anyway.
-
Satellite L500-13z - Windows 7 does not recognize wireless network adapter
Hello
The Windows 7 RC Device Manager does not recognize my wireless network adapter (for example: Atheros, Intel or Realtek). I tried to install all the Toshiba support drivers, but none of them work:
After installation, they ask me to connect the unit to my computer (of course it is still on the motherboard!).
=>, Is there a way to know what is my Wifi adapter?
that one failed: http://aps2.toshiba-tro.de/kb0/HTD7201PO000SR01.htm (this is the only Word to say "network adapter" with a yellow exclamation point).
-Online someone knows when will be released Windows 7 drivers on the website?
Hello
Before you begin to install all drivers WLAN you can find on the Toshiba site you must make sure that wireless network card, you have exactly. You can check in the Device Manager-online properties-online Details of the local network adapter device.
Need you an information like PCI\VEN_XXXX & DEV_XXXXIf you have based this information you are looking for with these terms on this site in order to determine the exact WLAN card:
http://www.PCIDatabase.com/After that, you can download the driver appropriate for your laptop. Before installing, you must uninstall all other versions and restart the laptop.
Also, make sure that the WIFI is enabled with the hardware switch and FN + F8.Welcome them
-
Hi @ all. IM new here and I hope that someone can help me with my special problem.
It is possible run a virtual machine with physical network adapters?
Example:
I have a host computer with 2 NETWORK interface card
Card NETWORK 1 is in subnet 1 for network-access with host
Card NETWORK 2 is in subnet 2 for access to the network with comments
Because our security level, the host computer is allowed only by using subnet 1 and the comments system is allowed only by using subnet 2
For sure the two NIC is installed on the host computer, but only NIC1 is configured on the host.
Hello
Can you be more specific please what virtualization system to use? VSphere, Workstation, Server?
If you find this information useful, please give points to "correct" or "useful".
-
Several subnets on a single NETWORK adapter
I have two subnets, I want to be able to use with my virtual machines on a server with 5.5 ESXi. I have only a single NETWORK adapter that is available on the host.
The VMkernel default Port, vmk0 is assigned the IP 10.208.82.34/29. The default gateway is 10.208.82.33. Can I add virtual network adapters to virtual machines and the ping without problem to a host outside the subnet 10.208.82.32/29.
I created a second Port VMkernel, vmk1 and assigned the IP 10.108.65.38. Then, I set up a second virtual NETWORK adapter inside a virtual machine with an IP address of 10.108.65.33. I can't ping this new IP address, 10.108.65.33, to another host. However, I can ping 10.108.65.38 without any problem. If adding a second card virtual NETWORK to a different virtual machine and assign it 10.108.65.34, I thing ping 10.108.65.33 without any problem. I cannot ping this address, 10.108.65.34, another host either.
I know that the issue is not routing as doing a traceroute from a host shows the correct path is taken. determination of route of 10.108.65.38 complete normally. I don't have access to the network infrastructure, because it is a server in a data center.
The VMkernel, vmk1, using the 10.108.65.38, is accessible from the default gateway and the other hosts in the data center. However when I attribute 10.108.65.33 to a virtual machine, I can't reach that what anyone outside the 10.108.65.32/29 network, which is my problem right now. If I assign an address in the subnet of 10.108.65.32/29 as the single IP address to a virtual computer, it still does not work is not a problem of routing within the virtual machine.
I feel as if I had something simple here as it seems to work almost disappeared.
Here is the configuration of the network:
This is the routing table:
~ # esxcfg - road - l
VMkernel itineraries:
Interface of network gateway subnet mask
10.108.65.32 255.255.255.248 subnet local vmk1
10.208.82.32 255.255.255.248 subnet local vmk0
by default 0.0.0.0 10.208.82.33 vmk0
I ended up having the point of provider the subnet 10.108.65.32/29 to their router or switch to 10.208.82.38, I have basic and then install a Linux router with iptables to route traffic to myself.
-
Windows 8 problem with wireless network adapter
I had a lot of trouble to stay connected to the internet with my college wireless network on
my laptop Windows 8. Especially when my computer is endearing to load a large number of data, the connection becomes limited and stops working. I use the resolution of problems and there's always the wireless adapter, which always solve the problem. This problem will not occur on the unsecured network comments from school or home. I tried many solutions to solve the problem, as going to tab the wireless one adapter power management uncheck allow the computer to turn off this device to save power. nothing has worked so far. Here are the details of the detection of the troubleshooter from the last time that this problem occurred:
Details about network adapter diagnosis: Network adapter Wi-Fi driver information: Description . . . . . . . . . . : Dell Wireless 1704 802.11b/g/n (2.4GHz) Manufacturer . . . . . . . . . : Broadcom Provider . . . . . . . . . . . : Broadcom Version . . . . . . . . . . . : 6.30.59.74 Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem51.inf Inf File Date . . . . . . . . . : Monday, September 17, 2012 6:52:18 PM Section Name . . . . . . . . . : BCM1704HMD_NT62 Hardware ID . . . . . . . . . . : pci\ven_14e4&dev_4365&subsys_00161028 Instance Status Flags . . . . . : 0x180200a Device Manager Status Code . . : 0 IfType . . . . . . . . . . . . : 71 Physical Media Type . . . . . . : 9
Diagnostic information (wireless connectivity)Details about wireless connectivity diagnosis: Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Connection incident diagnosed Auto Configuration ID: 1 Connection ID: 1 Connection status summary Connection started at: 2015-03-08 14:48:33-522 Profile match: Success Pre-Association: Success Association: Success Security and Authentication: Success List of visible access point(s): 7 item(s) total, 7 item(s) displayed BSSID BSS Type PHY Signal(dB) Chnl/freq SSID ------------------------------------------------------------------------- 28-8A-1C-FE-CA-80 Infra
-91 1 smcm-guest 28-8A-1C-FE-0D-80 Infra -50 1 smcm-guest 28-8A-1C-FE-0D-82 Infra -54 1 resnet 28-8A-1C-FE-B5-C0 Infra -48 6 smcm-guest 28-8A-1C-FE-B5-C2 Infra -47 6 resnet 28-8A-1C-FE-3F-40 Infra -91 6 smcm-guest 28-8A-1C-FE-3F-42 Infra -88 6 resnet Connection History Information for Auto Configuration ID 1 List of visible networks: 2 item(s) total, 2 item(s) displayed BSS Type PHY Security Signal(RSSI) Compatible SSID ------------------------------------------------------------------------------ Infra No 87 Yes smcm-guest Infra Yes 87 Yes resnet List of preferred networks: 5 item(s) Profile: mobilenet SSID: mobilenet SSID length: 9 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: NETGEAR30 SSID: NETGEAR30 SSID length: 9 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Yeager Network SSID: Yeager Network SSID length: 14 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: Yes Profile: smcm-guest SSID: smcm-guest SSID length: 10 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028001 Information for Connection ID 1 Connection started at: 2015-03-08 14:48:33-522 Auto Configuration ID: 1 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Pre-Association and Association Connectivity settings provided by hardware manufacturer (IHV): No Security settings provided by hardware manufacturer (IHV): No Profile matches network requirements: Success Pre-association status: Success Association status: Success Last AP: 28-8a-1c-fe-b5-c2 Security and Authentication Configured security type: WPA2-802.1X Configured encryption type: CCMP(AES) 802.1X protocol: Yes Authentication mode: User only EAP type: Authentication not started Number of 802.1X restarts: 0 Number of 802.1X failures: 0 802.1X status: Success Key exchange initiated: Yes Unicast key received: Yes Multicast key received: Yes Number of security packets received: 13 Number of security packets sent: 13 Security attempt status: Success Connectivity Packet statistics Ndis Rx: 400791 Ndis Tx: 204956 Unicast decrypt success: 0 Multicast decrypt success: 0 Unicast decrypt failure: 0 Multicast decrypt failure: 0 Rx success: 1632 Rx failure: 846 Tx success: 240 Tx failure: 0 Tx retry: 24 Tx multiple retry: 12 Tx max lifetime exceeded: 0 Tx ACK failure: 60 Roaming history: 0 item(s) Diagnostic information (wireless connectivity)Details about wireless connectivity diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Auto Configuration Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Result of diagnosis: There may be problem
Diagnostic information (wireless network adapter)Details about wireless network adapter diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Native WiFi MSM Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Connect even if network is not broadcasting: Yes Result of diagnosis: There may be problem
Thanks for any help! It happened for about eight months and it's really frustrating.
Hello
Check with Dell and Broadcom, their documentation diagnostics online and drivers.
and ask questions in the forums about known problems. The two Dell driver update, then
Broadcom if there is more recent.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/Dell PC Diagnostics
http://www.Dell.com/support/Diagnostics/us/en/19/
Broadcom - downloads and Customer Support
http://www.Broadcom.com/support/==============================
More troubleshooting:
It is possible that the drivers you use, even if later now available, are not
100% Windows compatible 8.1. Check with the manufacturer of your system (motherboard support
Manufacturer of custom systems) and/or the manufacturer of the device. This one, like Intel,
RealTek, Atheros and others may have newer versions is not available to the mother of system
-site of the manufacturer on board. And continue to check in with them regularly over the next year.
Also update the BIOS, drivers from the chipset of low level and major embedded and separate
device drivers.Download your applications and devices in Windows 8.1
http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working=========================================================
Don't forget to check the updates of the firmware on the router, because who can have a definite effect
on connections Windows 8.1 same if other OS systems connections are fine.Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) and/or
the manufacturer of real device driver updates. If there is no newer versions re - install the same
ones. Ask known in their forums (if any) problems.===================================
General resolution: (after the above if necessary)
Free Wi - Fi and wireless problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Note the use of Win Key + X and Win Key + W (to access control panel, run,
and settings according to needs). Win + D key calls to the office and use
Win Key activates / deactivates the desktop and start screen.--------------------------------------------------------------
Control Panel - Network and sharing Center - solve problems
References to Vista also apply to Windows 7 and Windows 8.
Your router be guess here, you have successfully updated the firmware a possible
solution? And I would update your WiFi drivers on computers. How far away are they
you have set in the router? Are there obstacles in the path?Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click
top - tab of the driver - write version - click on update driver (can't do
nothing that MS is far behind the certification of drivers). Then right click on the Wifi
Device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system Maker you can see the same device manufacturer
more recent versions. (Those become your fonts of rescue system manufacturer).Repeat for network (NIC) card and is a good time to get the other update
Drivers Windows 8 like updated drivers.The adapter in Microsoft Windows 8/8.1 network problems - how to fix? (Do not forget to see
This section-> update the NIC driver).
http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problemsDrivers and Microsoft - Windows 8/8.1 - material
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Microsoft Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceMicrosoft Windows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly
------------------------------------------------------Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - set up a new connection or network
-----------------------------------------------------
And:
TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/Microsoft - Windows 8/8.1 - Web & Networking
http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8Microsoft - Windows 8/8.1 - Wi - Fi & Networking
http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1-----------------------------------------------------
Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slowMicrosoft - Windows 8/8.1 - wired and wireless in Windows problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
VMWare Fusion 6.0.2 with Windows 8 - no found network adapter
Hello
I recently installed VMware Fusion 6 Professional edition on my Macbook Pro running 10.9 Maverick. Then, I installed Windows XP and then immediately upgraded to Windows 8.0. When I tried to access the Internet using Windows 8, I can't. I received the message "no connection is available. How do I fix this? I have no problems when you access the internet from the host operating system. I have found several articles in the Knowledge Base for the different configurations and tried a few steps, but still no resolution.
- Restarted Windows 8 and restarted Maverick
- Diagnostics ran Windows 8, which gave rise to: "Windows did not detect a network card is installed correctly. If you have a network card, you will need to re - install the driver. »
- Firewall Windows - turns off network settings private and Public
- Tried to change map of network VMware between NAT and bridged (Autodetect and Wi - Fi).
- I noticed something on the modification of the file .vmx but you have not yet tried this step.
- I found an article saying merger allowed 5 type VM OS update by going to 'Settings' and select 'Général', but I can't find this option in Fusion 6 Pro.
I looked for an article about my particular setup, but found nothing. If someone can help to provide a useful link to an article for my setup or is aware of how to solve this problem... I would be very happy!
Recent model MacBook Pro 2011
OS X - 10.9.1 - Maverick
Intel Core i7 2.2 GHz
Memory - 16 GB MHz DDR3
HD 500 GB
VMware Fusion Professional 6.0.2 (1398658)
Originally installed with Windows XP Professional SP2
Immediately upgraded to SP3
Immediately updated to Windows 8 Professional (Build 9200)
Configured with 2 CPU cores
Memory - 4 GB
Hard - 100 GB disk
Thanks in advance for your help,
Jeff
I would never do an in place upgrade of Windows XP to Windows 8 on a Virtual Machine! Instead I create a Virtual Machine from Windows 8 and install directly Windows 8 by using the upgrade of media! Take a look at: Clean install Windows 8 with upgrade media
If you don't want to do just like first of all, I suggest and want to fix the Windows XP upgraded the Virtual Machine, do the following in the parameters of the Virtual Machine.
Under system settings > General, change NAME and OS Windows 8.
Under removable devices > NIC > advanced options, click on remove the network card.
Click the device to add... and select the network card, and then click Add.
This should fix the gaps between the default Windows XP network card settings and the settings of the network adapter in Windows 8.
-
do you have a system restore, but now no internet, no file Ethernet controller or details available, only one network adapter is noida nforce networking controller. How to find the correct drivers to reinstall? Thank you!
Hello:
Ethernet controller with the ID of PCI\VEN_168C & DEV_0013 is a wireless Atheros made by Netgear adapter.
It was not standard equipment on your model.
You can download the driver from the below link at the top right of the page.
http://support.NETGEAR.com/product/WG311T
After downloading the file, unzip it and run the setup.exe file in the folder.
-
Problem "there could be a problem with one or more network adapter on the computer?
Hi, I just changed my modem, I can't connect to the internet. I can connect to wireless network but not to the internet. When I diagnose, he said, "there could be a problem with one or more network adapter on the computer. I searched the internet but I can't find anything. When I diagnose, I have also seen something on the 'hot spots', but I can't remember it clearly? Any help please?
Also, when I go to Device Manager network adapters, each of them has WARNING signs except two of them.
Hello:
If your laptop is an Atheros AR5007 wireless card, see if installing this driver solves the problem, you have to be able to connect to wireless but no internet network.
-
cable not connected network adapter
I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up and do not use any type of router and I'm not on a network. I also tried to disable my network card & it still says the same error. I have an internal network card that came w / the computer (NOT a PCI one) and I wonder if there is a cord or a plug inside my computer that must be plugged. I made some changes on the internal hardware and might have missed an and I didn't have to open my Tower if it wasn't. It's a big hassle! Help, please!Hello
1. Once you get the error message?
2. do you get the error when you try to disable Norton anti-virus?
3. are you able to access the Internet explore?
Temporarily disable the antivirus on the computer running software and check if you are able to install the software.
Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Maybe you are looking for
-
HP DV7t-7200 screen hinges loose
Please help me fix my loose hinges HP DV7t - 7200 Display. I don't know how to open Notepad for the hinges of the screen. Thank you.
-
HP laptop Dv6105us - someone running Windows 7 on the F.43 update BIOS?
I've updated computer laptop DV6105US used my friend for the retail of Windows 7. I wasn't able to get the wireless and wireless button to work even with the Broadcom driver updates and the Internet Wizard from HP. It is possible that the wireless d
-
I want to upgrade a Compaq Presario 17XL360 Windows ME to Windows XP Professional, but no other solution I tried other forums worked to resolve the error message about missing file i386\WIN9XUPG\W95UPG. DLL. I don't have Roxio Easy CD Creator install
-
Savings Director of films in question-windows
After I added 2 movies for only 6mins +, I clicked Save Movie but it remains at 0% complete for more than 30 minutes, are at - it none of the software I have does not have, I am currently using Windows Vista, please help, help is appreciated, thanks.
-
If you have downloaded the free update on a file on your computer before the expiration of the free update can still install you it?