Sfc/scannow error: Windows Resource Protection could not perform requested operation

Similar Questions

• Error message "Windows Resource Protection could not perform the requested operation" when running SFC scan.

  As suggested, I tried to run scannow to repair Windows Vista.  I did, but then the scan only ran up to 76%, I received the message: Windows Resource Protection could not perform the requested operation. "How can I complete the scan and fix my Windows Vista computer

   
  Hi rdoran,
  You perform the steps from the administrator account?
  
  To determine which files can be repaired by the System File Checker tool, follow these steps:
  Step 1:
   
  NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.
  
  For how, see the SFC analysis details in the CBS. JOURNAL:
   
  * Open an elevated command prompt.
  
  * In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.
   
  * Close the elevated command prompt.
  
  * Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.
   
  * You can safely delete the sfcdetails.txt file later if you wish.
  Reply back with the details in the log file.
  
  If it does not help to complete the scan, you can complete the steps below and check out them.
  
  You're able to boot in safe mode ?
   
  Step 2:
   
  For more information on how to log in to safe mode, see the following Microsoft article:
   
  Startup options (including safe mode)
   
  If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.
   
  Reference:
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Step 3:
  
  In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
   
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• SFC/scannow stuck at 70 percent and I get the message "Windows Resource Protection could not perform the requested operation".

  Original title: whenever I run SFC/scannow I get to 70 percent and I get the message "Windows Resource Protection could not perform the requested operation". How can I fix this problem and complete the scan?

  Please answer with repair options and details on where to go to get there.

  If safe mode can't complete, it can be continuous malware (run malwarebytes) so clean, you will probably have to run a repair installation.

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• Parse error SFC "Windows Resource Protection could not perform the requested operation".

  Original title: my computer is messed up, and I'm unable to fix
   
  (1) double click on files will open in a new window
  (2) not possible to delete several records
  I tried to find and implement several solutions found on these forums for the 1st problem listed above. I tried to go into folder options and disable double click open files option and I tried to replace with original system files according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folders-open-in-new-window-despite-folder-option/5fba3897-7655-4068-8992-2d8b20063b3f and nothing has worked. I tried to run the command prompt in administrator mode to scan files using the command "sfc/scannow" and even that did not work, as when checking for 59%, it says "Windows Resource Protection could not perform the requested operation"
  I tried to create new administrator user accounts and the problem persists.
  I am also unable to delete some files. Internet Explorer would be my best and later example. I ran microsoft update, it installed IE10, and I was unable to start IE. I have not found in the list of uninstaller, so I tried to delete the files manually but Icould do not, that I needed approval from "TrustedInstaller". I played a bit with permissions and gave myself all permissions, with the exception of special permissions (which was grey), and then he said I needed the permission of 'Administrators' when I tried to delete the folder. Well, I'm on my administrator account, what the devil?
  I ran some virus scans of Malwarebytes Anti-malware, Virus of Sophos, Microsoft Security Essentials, and 2013 Bitdefender removal tool and removed something taken before implementing ALL the solutions mentioned above attempts. Try a system restore after that these scans completed, I discovered that I had no restore point before the installation of the Microsoft fix - it (i.e. when I was first trying to tackle these questions)
  Is there something I can do?

  You could make a backup of the image to a DVD or disk.

  Renee

• When you try to run the SFC/scannow I get the following message: Windows Resource Protection could not perform a requested operation.

  When you try to run Fsc/scannow I get the following message: Windows Resource Protection could not perform a requested operation. Can anyone help?

  Original title: problems with Windows Live Update

  You run it from a (run as administrator) command prompt?

  SC Tom

• sfc/scannow error message - "Windows Resource Protection could not perform the requested operation".

  Recently, things are held in my computer after trying themes. I don't know what I fiddled with, but I do know something ExplorerFrame.dll in system32 and sysWOW64. I've tinkered with it to try to change my navigation settings. (The arrows in windows Explorer)  I don't know if that's the problem, but my main problem is when I try to save anything, or "save under" or try to save anything even in microsoft word or adobe reader, none of the folders in my navigation pane is there! It's just empty! I tried to solve this problem with sfc/scannow, but the message that I put in the title appears when it reaches 10%! I've tried everything literally! I tried running sfc/scannow offline, and it comes up with a message 'Protection of resources Windows could not start the repair service.' I also tried to check in my services to see if the Windows Module is manual in the startup type, and it is! The last thing I could think that I tried was the start in safe mode with command prompt, and it still does not. If anyone can help me, please! I've tried everything! * I forgot, I have try running CMD administrive rights, still won't work *.

  Thank you for the help, but I figured it out by myself. I replaced the old version ExplorerFrame.dll in system32 and sysWOW64 folders to a new! I managed to do it by copying the correct files to another computer and replacing them with the 'old' I have fiddled. Thanks for your help!

• How can I remove the rest of the damaged files that Windows Resource Protection could not?

  How can I remove the rest of my corrupted files that Windows Resource Protection did not delete?  It offers no suggestions?  If he deleted some, why can't this?    I did the scan twice, but it says this... CBS. Newspaper windir/Logs/CBS/CBS.log for more details... I don't know how to access, also said the damaged drive was C / windows / System 32/config/software/log is corrupted and unreadable.  Hope that there is a way to solve this problem... Thank you

  Hello

  Try the following and see if it helps.

  I suggest you perform a disk check and check if it helps.

  See the following steps:

  a. open the computer by clicking the Start button, click computer.

  b. click the drive you want to check, and then click Properties.

  c. click on the Tools tab and then, under error-checking, click Find now.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. to automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

  e. to carry out a thorough, check select search for and attempt recovery of bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  f. to check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  g. click on start.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: Make sure also that you have disconnected all external devices except the keyboard and mouse.

  Note: If you are always faced with the question then I suggest you to upgrade on the spot and check if it helps.

  How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2255099
  Note: Before you perform the upgrade on the spot, I would recommend you to back your files using windows backup.

• Windows resource protection could not start the repair service

  Hello

  I have a computer running Windows 7 with Office 2013 thereon. I forgot to remove the 2013 desktop in the control panel and the removal of FixIt. He suggested something wrong with the system. Then I run sfc/scannow, I got "couldn't windows resource protection start the repair service". The Windows Modules Installer service is started.

  Please tell us how to solve this problem.

  Thank you

  Hi Grace-

  Follow these steps to make a Windows 7 repair facility .

  It explains how to find the Windows 7 support for your version in step 1 of the clean reinstall Windows 7   If the repair facility does not help then I would follow the steps in the Installer Clean link to get and keep the best possible installation.

• sfc/scannow "Windows Resource Protection could not start the repair service".

  With the help of an elevated command prompt I'm unable to start the Sfc/scannow. I checked Services.msc and TrustedInstaller is started. It was suggested that I should check the logs for the System File Checker. However I can only interpret the newspapers and even if I could I do not know how to correct the error that lies in the newspapers. I was wondering if someone would be able to interpret the papers for me and guide me on how to correct errors that may be found in the newspaper that prevent me from running "Sfc/scannow" thanks.

  Since it is win 7 you cannot run DISM, so your only option is to do a repair install of win 7 dvd.

• SFC/scannow error message: Windows Resource Protection could not start the repair service

  I am trying to solve a problem with a HP Pavillion Vista laptop where I get a black screen after screen of the HP logo with a message that says "the file is maybe damaged. The file header checksum does not match the checksum calculated. »

  Hello

  I wrote a post on running a check offline that someone might find it useful,

  http://mikemstech.blogspot.com/2011/12/how-to-perform-offline-system-integrity.html

• SFC windows file protection could not run a scan of protected system files

  Hello

  First of all I am sorry for my English

  My problem is the application of file system auditor

  When run in the console, I get this message:

  Windows file protection could not initiate a scan of protected system files

  the specified error 0x000006ba code [the RPC server is unavailable]

  I also test the problem in safe mode and get the same message

  even I check the "SFCDisable" registry key and set it to zero but not solved the problem

  do you have any idea?

  Hello

  Try this:
  Click Start , then run... and type cmd and press enter.
  Now, type enable RpcSs SYSTEM_AUTO_START and press enter.

  Restart your PC and see if you can run sfc.

  If not then try a chkdsk which is what helped me with the same question :)

  --> I hope this helps! Please mark it as correct answer or vote if it does :)<>

  http://www.pcuk.biz - my website
  

  Info from Microsoft about phishing . Information from Microsoft on the fake security software

• Error message when opening the parts attached Windows could not perform this operation because the explore default e-mail client has not been installed correctly.

  Original title: fault of the Explorer

  How can I solve this problem.

  Sometimes when you try to open an attachment, I see this message:

  Windows could not perform this operation because the explore default e-mail client has not been installed correctly.

  Thanks for your HELP!

  Hi Robert,.

  Thank you for your response.

  Please let us know if you need help with Windows, we will be happy to help you!

• Process * \MCSHIELD. EXE the nest (428) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  XP SP3 system

  I get warnings like this when Mcafee updates.

  Process * \MCSHIELD. EXE the nest (428) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  Process * \SVCHOST. EXE the nest (1632) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  Is this a problem Microsoft or Mcafee?

  Do I need to fix?

  In the McAfee forums, there are several similar positions such as:

  https://community.McAfee.com/message/241542

  I'll sue your question on in their community, as they already seem to know about it.

  I would also say that, unless you are very fond of McAfee or you are forced to use it, you plan to replace it with something that has a smaller footprint, uses less resources and doesn't have these problems - something like Microsoft Security Essentials, you can get here:

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  MSE completed with the free version of MBAM and SAS should permanently keep your clean enough unless you're a daredevil like me:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  Even if you keep McAfee, I always supplement it with MBAM and SAS since no single AV program does seem to know everything.  If your McAfee of your system is clean, I would interpret that means - McAfee found nothing, says he knows.  It is prudent to use more than a reputable scanner to get more coverage.

  If you choose to spend (and you can't have both at the same time), you must be sure to use the uninstaller that you can get from here:

  http://service.McAfee.com/FAQDocument.aspx?LC=1033&ID=TS101331

  Your system will give you better performance.

• Outlook and printers do not work and SFC error Windows Resource Protection found corrupt files but was unable to solve some of them.

  Separated from this thread.

  SFC all said above.

  Windows resource protection found corrupt files but was unable to solve some
  of them. Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log.

  I was hoping that fixing the above might fix below.

  I had 2 problems.

  In outlook I have about 300 deleted messages from the deleted folder and when I entered the box and they were all there. I did it again and it happened again. Finally I did drag the files to the junk e-mail folder and not empty and they were gone and he seems to have stopped.

  The other problem is with the printer profiles. I changed routers and had to reinstall the printers.

  They appear ok in devices and printers, but when I go to print all old printers appear. They are not in the Control Panel, just new, but the drop down menu select printer boxes have many printers that are not active or working more. I would like to get rid of them.

  Thank you

  Harv

  SFC checks really just a list of some of the most important files (such as those required in order to activate the system at a very basic level), and generally what he is going to fix all that is at a "higher level." And Yes, it will almost always find one or two tiny little things but they are not significant failures, just a file with a version number of new or more than what's in the list.  Unless there is a symptom of a problem, probably best simply to ignore it.

  Just follow best practices: do not run as administrator for daily use, maintain and keep a backup (use a simple as automatic backup, Carbonite or store your files in OneDrive).

• Windows Installer error - "Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed correctly"

  Original title: Windows Installer could not access
  I am running Vista Home Premium x 64.  Recently when I try to install/upgrade programs up-to-date currently any Apple IE iTunes Quicktime and Safari I get this message.

  Windows Installer service could not be accessed.  This can occur if Windows Installer is not installed properly.

  The window update fails on the stage of the installation.  I have read several threads and tried several fixes, but without success.
  I have disabled/restarted/activated/restarted and switched to manual, auto and back with no success. When I try to force an early Setup, I get the following message:
  The Windows Installer service on Local computer started and then stopped.  Some services stop automatically that they are not in use by other services or programs. 
  I deleted the temp under apps folder.  I copied the reg. Since a sound Vista machine and imported into my machine setup.  I tried again with a reg. offered in one of the sons, all with no change.
  I tried to install version 4.5, but was unsuccessful (it looks like I got lucky there).
  May be related or yet another problem, whenever I have Windows Live Mail, a ope 'preparation for the installation of window lights up for about 15 seconds before disappearing and then my mail opens.
  I don't have a Vista CD.  My HP provides on a partitioned drive recovery files.  There seems to be no usable on my computer restore points.
  Ideas?  Help?
   

  Hello

  What happened when you tried to install Windows install version 4.5? You get an error?

  Follow these methods and check if it solves the problem:

  Method 1:
  Auditor of files (SFC) system scan on your computer. SFCscanwill make Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. click on continue or provide administrator credentials if prompted.
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow

  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

  Method 2:
  After analysis of SFC running, try again to install Windows Installer 4.5 Redistributable.

  Refer to this article:
  http://support.Microsoft.com/kb/942288/en-AU

   

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.