SFC/scannow found but could not fix some corrupted files

Similar Questions

• SFC/scannow found but could not fix some corrupted files, how can I remove them / find them?

  Separated from this thread.

  Rob,

  Sincerely appreciate the info/advice.  I ran sfc/scannow and cropped the results to include only the unable to complete sections.  OK portions have been eliminated for practical reasons.  PC is a Vista PC with SP2 and all updates.  The antivirus program is run several times a week and has identified no virus/spyware/malware.  No other real problems with PC.

  2015-03-19 17:07:14, CSI Info 0000014 c [SR] beginning verify and repair operation
  2015 03-19 17:07:16, CSI Info 0000014 d [SR] cannot repair the military record [l:18 {9}] "Chess.dll" Microsoft-Windows-Shell-PremiumInboxGames-chess, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:19, CSI Info 0000014e [SR] cannot repair the military record [l:32 {16}] "PurblePlace2.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:19, CSI Info 0000014f [SR] cannot repair the military record [l:30 {15}] "PurblePlace.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:20, Info CSI 00000150 [SR] cannot repair the military record [l:32 {16}] "PurblePlace2.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:20, Info CSI 00000151 [SR] this element is referenced by [l:160 {80}] "' Package_65_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 240_neutral_GDR" "
  2015-03-19 17:07:20, Info CSI 00000152 [SR] cannot repair the military record [l:30 {15}] "PurblePlace.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:20, Info CSI 00000153 [SR] this element is referenced by [l:160 {80}] "' Package_65_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 240_neutral_GDR" "
  2015 03-19 17:07:20, info CSI 00000154 [SR] could not reproject corrupted file [ml:520 {260}, l:98 {49}] '------? "\C:\Program Files\Microsoft Games\Purble Place"------[l:30 {15}] "PurblePlace.dll"; source file in the store is also corrupted
  2015 03-19 17:07:21, info CSI 00000155 [SR] cannot repair the military record [l:18 {9}] "Chess.dll" Microsoft-Windows-Shell-PremiumInboxGames-chess, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:21, info CSI 00000156 [SR] this element is referenced by [l:160 {80}] "' Package_66_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 243_neutral_GDR" "
  2015 03-19 17:07:21, info CSI 00000157 [SR] could not reproject corrupted file [ml:520 {260}, l:84 {42}] '------? \C:\Program Files\Microsoft Games\Chess"\[l:18{9}]"Chess.dll; source file in the store is also corrupted
  2015 03-19 17:07:21, info CSI 00000159 [SR] verification complete

  2015-03-19 17:08:47, transaction Info CSI 00000187 [SR] beginning verify and repair
  2015 03-19 17:08:49, info CSI 00000188 [SR] cannot repair the military record [l:36 {18}] "ShaderCache.ps_2_0" Microsoft-Windows-WindowsSystemAssessmentTool, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015 03-19 17:08:55, info CSI 00000189 [SR] cannot repair the military record [l:36 {18}] "ShaderCache.ps_2_0" Microsoft-Windows-WindowsSystemAssessmentTool, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:08:55, CSI Info 0000018 [SR] a the item is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "

  2015-03-19 17:10:25, CSI Info 000001 c 2 [SR] repair 3 components
  2015-03-19 17:10:25, CSI Info 000001 c 3 [SR] beginning operation check and repair
  2015-03-19 17:10:25, CSI Info 000001 c 4 [SR] cannot repair the military record [l:32 {16}] "PurblePlace2.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 5 [SR] cannot repair the military record [l:30 {15}] "PurblePlace.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 6 [SR] cannot repair the military record [l:18 {9}] "Chess.dll" Microsoft-Windows-Shell-PremiumInboxGames-chess, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 7 [SR] cannot repair the military record [l:36 {18}] "ShaderCache.ps_2_0" Microsoft-Windows-WindowsSystemAssessmentTool, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 8 [SR] cannot repair the military record [l:18 {9}] "Chess.dll" Microsoft-Windows-Shell-PremiumInboxGames-chess, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 9 [SR] this element is referenced by [l:160 {80}] "' Package_66_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 243_neutral_GDR" "
  2015-03-19 17:10:25, 000001 ca CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:84 {42}] '------? \C:\Program Files\Microsoft Games\Chess"\[l:18{9}]"Chess.dll; source file in the store is also corrupted
  2015-03-19 17:10:25, 000001cb CSI Info [SR] cannot repair the military record [l:32 {16}] "PurblePlace2.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, 000001cc CSI Info [SR] this element is referenced by [l:160 {80}] "' Package_65_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 240_neutral_GDR" "
  2015-03-19 17:10:25, CSI Info 000001 cd [SR] cannot repair the military record [l:30 {15}] "PurblePlace.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI 000001ce [SR] Info this item is referenced by [l:160 {80}] "' Package_65_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 240_neutral_GDR" "
  2015-03-19 17:10:25, 000001cf CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:98 {49}] '------? "\C:\Program Files\Microsoft Games\Purble Place"------[l:30 {15}] "PurblePlace.dll"; source file in the store is also corrupted
  2015-03-19 17:10:26, CSI Info 000001 d 0 [SR] cannot repair the military record [l:36 {18}] "ShaderCache.ps_2_0" Microsoft-Windows-WindowsSystemAssessmentTool, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:26, CSI Info 000001 d 1 [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "
  2015-03-19 17:10:26, CSI Info 000001 d 3 [SR] full repair
  2015-03-19 17:10:26, CSI Info 000001 d 4 [SR] validation of transaction
  2015-03-19 17:10:26, CSI Info 000001 d 8 [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

  A few notes:

  (1) we will NEVER buy another PC with a trace of all 'games' that is, waste of space and time and a value.  Looking at the impossible to correct entries, they seem to be exclusively associated with functions of game without value.

  (A) we need to participate in this farce of a game or can simply be ignored without affecting

  legitimate operation/functions of the PC?  When close or restart, we get the error message

  0 x 0000142 failed to initialize properly... Other PC functions seem to work well.

  (B) is there a way to clean up the waste of space games so that would solve the problem

  without affecting the performance of the PC? (When try to remove the game worthless hoax,)

  It will not remove them). I know that some of the files 'source' for waste games

  missing.  Since NONE of them will ever by used, is there a reason to worry?

  Thanks in advance for your help.

  Gene

  St Paul, MN

  Hello

  This note at the end:

  "2015-03-19 17:10:26, info CSI 000001 d 8 [SR] check and repair the Transaction."
  completed. All of the files and registry keys listed in the operation have been successfully
  "repaired"

  Run a Checkdisk just to be sure and rerun the SFC.

  Run checkdisk - schedule it to run at the next startup, then apply OK your way
  outside, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  You can ignore the problems of game but if there is ever, all you are concerned about
  then you can extract the files from the Vista DVD or even to make a upgrade in Place or repair
  Installation

  Access files on your Vista installation DVD
  http://www.Vistax64.com/tutorials/86959-access-Vista-install-DVD-files.html

  How to extract system files missing from the DVD of Windows 7/Vista.
  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  --------------------------------------------------------------

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• SFC/scannow errors found but could not fix some files corrupted,

  Greetings! my windows Explorer still crashes so I tried to search this site for possible answers to my problem, I found one by sfc/scannow, I tried to find some probs then we found that my file explore was corrupted. It's fixable without reformat my OS?...
  How?
  I have a 64-bit windows 7 ultimate service pack 1 System. Thanks in advance for help Microsoft Community!
  Here's the part of my report sfcdetails.txt log:

  2016 01-25 14:53:05, info CSI 00000088 [SR] cannot repair the military record [l:24 {12}] "explorer.exe" from Microsoft-Windows-explorer, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2016-01-25 14:53:05, CSI Info 0000008a [SR] cannot repair the military record [l:24 {12}] "explorer.exe" from Microsoft-Windows-explorer, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2016-01-25 14:53:05, CSI Info 0000008b [SR] this element is referenced by [l:202 {101}] "Microsoft-Windows-Foundation-Package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.7601.17514.WindowsFoundationDelivery '.
  2016 01-25 14:53:05, CSI 0000008e Info [SR] could not reproject corrupted file [ml:520 {260}, l 28 {14}] '------? \C:\Windows"\[l:24{12}]"Explorer.exe '; source file in the store is also corrupt.

  In safe mode and clean the boot, what was the results?

  Do you have the Windows 7 DVD?

  Follow the steps in the following Microsoft Support article:

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  Warning before you perform these troubleshooting steps:

  System Restore: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Disk check: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Security scanner: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Also, try the steps in the following Microsoft support article:

  Optimize Windows performance

  Please post back with the results and the information requested, we will be happy to help you further.

  ___________________

  Thank you best regards &,.

  Isha Soni

• Scannow found problem, could not fix, called file journal CBS but windows does not give me access to see

  Update not working - tried everything, including the command prompt scannow - he found problems but could not fix, then referred me to a CBS log file to see - but Windows will not give me access to the file to see.  What gives?  Of course, I have a problem - how to fix?  sfc/scannow info below:

  Microsoft Windows [Version 6.0.6001]
  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32>sfc/scannow

  Start scanning system.  This process will take time.

  Start of the phase of verification of the scanning system.
  Full check of 100%.
  Windows resource protection found corrupt files but was unable to repair some of th
  EM.
  Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example
  C:\Windows\Logs\CBS\CBS.log

  C:\Windows\System32 >

  The update which is a failure? The .net 4.0 security update?

  If so, try this:

  Credits go to Control_tps
  
  Try the following steps, please:

  1. go in programs and features, click on it.

  2. scroll to the bottom for Microsoft.Net Framework 4 Client Profile, do a right click.

  3. we will give you a choice of uninstall/change, click it.

  4. then it will give a choice to repair, choose repair. It will take about 4 to 10 minutes to repair (with my PC) experience may vary.

  5 once completed, will update you Center and update again.

  If not fixed, try to remove .net Framework 4.0 with the .NET Framework Cleanup Tool (http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx ), reinstall it and install the updates.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• SFC/scannow found he could not repair corrupted files

  Running Windows7 32 Bit

  Found several Pots every 5 to 7 years in which this issue; hoping that there may be a newer better way to solve the problem... so seconded and fingers crossed.

  * PC froze

  * Powered off / Powered it back on

  * Selected Normal boot started fine on the desktop PC

  Decided to run sfc/scannow.  "At the end it read: Windows resource Protection found damaged, files but was unable to solve some of them.

  Looked at the log CBS.log file.  It might take some time to review and even if I saw it that I would not be able to choose the corrupted files, nor know how to find and replace... and don't know if I was smart enough for that I could even remove and replace the files of the operating system.

  I realize I've read in some real old Posts on this topic, maybe some corrupt files are not really necessary or important... but I'd rather have a good job of OS.

  So is there a way to better\newer to resolve this issue... instead of finding what could be one is necessary in the files of the boot of Hay, then looking for right files to replace those damaged?

  I note an In BONE repair on-site... that worries me, because the software just doesn't do well after a repair on the spot.

  Looking for replacement option, and eager to have a BONE without corrupted files and corrupt files... If on-site repair is my only way to go... What are the actual steps not excluded... I have my original Windows7 DVD...

  Haven't tried using the system restore, given that this feature would not replace the corrupted files back to a previous restore point...

  Very well.

  Marking of my previous response as RESPONSE will officially close your thread.

  

  PS: Wouldn't mind a USEFUL vote while you're there either.

• sfc scannow found errors, but could not fix

  I have problems with cleaning disc. It runs, but never opens the window after execution. It gives an error at the bottom of the scan window "system error statement qued files.

  I ran sfc scannow and it finds corrupted files, but could not fix them.

  What should I do now?

  Thank you

  Jack Bowles

  Thanks for your information. I thought it was a waste of time and was upset to have to wait an hour and a half for it ends. I was under the impression that Check Disk would only verify that clusters are only valid as in they can keep information. But Check Disk resolved my sfc/scannow gap with files are corrupt.

  In addition, the utility repairman to start ran a test after a missed start and I noticed, he said there is a corrupted driver. She did not mention that now after running the disk check.

  All things look good now thanks to your information AirDump. My problem occurred after dust removal on my PC. I think that the plug for the power supply was the problem because he was a coward. Or maybe on the SSD cable was loose?

  Thank you very much for your time,

  Scott

• I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?

  I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?

  Hello

  I suggest you to please follow the steps described in the following articles and check if it helps.

  "Invalid product key" error in Microsoft Games, MapPoint, or Streets & Trips

  http://support.Microsoft.com/kb/812467

  How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint

  http://support.Microsoft.com/kb/973457

  Let us know if it helps!

• Error: "Flight Simulator could not load some program files and will now leave." at the start of the game after installing the reduction acceleration expansion Pack.

  Hi I just bought a copy of Microsoft Flight Simulator gold edition. and after installing and playing on the deluxe edition, I decided to add the extension of acceleration. and after installing the extension, the game no longer works it comes up with an error message saying "Flight Simulator could not load some program files and will now stop. Please reinstall Flight Simulator to restore or repair the installation of the program. ».

  Now, after a few days looking for a response, I decided to ask the guy who made the game.

  The error message also appears when I download just 2 service packs of Microsoft also.
  I have a laptop HP 630 with a processor intel core i3 - 2350 m cpu @2. 30 ghz, 2 GB ram, windows 8 pro 64-bit

  Original title: fsx gold edition...

  Try this, it worked for me:

  (1) uninstall normally from the control panel.

  Reinstall 2) in the Windows directory (C: here)

  (3) install SP1, SP2

• repair Windows XP registry needed. (windows live care scanner errors found but will not fix them)

  I am running Windows XP with IE 8 and Norton 360. I do updates regularly and also use the Windows Live One Care Safety Scanner. Each Analyzer detects a problem sometimes, and fix it. The Windows tool still found some problems in my registry and fixes some but not all. I'm still running a slow processor but there are times when the hard drive starts to crank and system enters a State bound upward to do something that takes forever and finally unlocks. If I look in the Task Manager, it is usually System Idle Process and ccsvchst.exe which is cranking up the numbers in the use of CPU time CPU and MEM. I have also a ton of svchost.exe running. I would like an easy way of fixing and removal of registry problems and then making sure the running processes are legitimate and not set not a priority as they seem to be. Thank you.

  If you have a problem with ccsvchst.exe, you do not have a problem with XP - you have a problem with Norton and it has long discussed performance and ccsvchst.exe problems accompanying the Norton forums.

  No single AV tool seems to know everything and Norton is whatever is not because your system is not infected.  It simply means that Norton doesn't find anything he knows.  If all goes well, you use more than one tool of analysis, but not more than one both if there is a real time involved protection they'll get in the way of the other.

  In some reviews, Norton has a reputation as one of the most famous system CPU and memory hog on the market - you could not picked up too more than AV tools with a more unfavorable reputation in this area, but some people really seem to it.  I think it's too fresh generals.

  You can temporarily uninstall it (using their special uninstall of course), reboot and see how your system works without him and then decide if keeping it is 'worth it' or consider broadening your horizons AV a bit.

  You can find out exactly how long your system takes to start down to the tenth of a second and determine exactly how long each process takes to start and then decide what to do (as opposed to guess).  For example, I know that my system takes exactly 28,03 seconds to start.

  When you see a report and a chart of your startup process full of one end to the other, it's more revealing and informative.  If you want to do this, we can tell you how.

  Unfortunately, the forums MS Answers don't ask not even basic on a system information when a new question is asked, so we know almost nothing about your system.

  If you want to talk a bit, follow these steps:

  Please provide additional information on your system:

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  You can also take a screenshot of your task manager or process and post it for review and analysis (there is an example below).

  This is my standard copy/paste on the way to understand the multiple svchost process (what a ton of them means to you) that you see in the Task Manager:

  You may be able to get clues with what is happening with your svchost process using the Task Manager and maybe understand.

  You will always be able to understand what is happening with your svchost process if you use Process Explorer.

  Download Process Explorer, so you can see what is 'really' running on your system, especially behind those svchosts several process see you in the running task manager.

  Download Process Explorer from here:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  You'll like Process Explorer when you get the hang of it.  Process Explorer is the Manager of Windows taskbar on steroids.

  Process Explorer installs nothing so it won't slow down your system since it works only on request.

  Process Explorer can seem a little intimidating at first because it has so much information, but you will begin to make love the way it works when you're looking for performance problems.   You can even say EP you want it to be your new default 'Task Manager' value in the future.  You can always run the original tasks as Manager.

  Once you get Process Explorer running, expand the columns, made drag the corners of the screen for it's largest, etc., so you can see as much information as possible in the window.  Now you can really see what is running on the system.

  Here's a screenshot of my poor system when I use Process Explorer:

  http://img222.imageshack.us/img222/2567/ProcessExplorer.PNG

  The CPU column is usually the most interesting start with performance issues - which uses the most?

  It is OK and normal to have several svchost running processes.  Important XP Services are actually runs under the svchost process. There are sometimes an XP Service that runs under a svchost process, sometimes there are several Services in XP, which runs under the svchost process.

  Sometimes malware will hide behind a svchost process because the malware knows that you won't be able to find it in the Task Manager.  He will hide behind a svchost.exe process to deceive you, but you can outsmart it.

  Malicious software can disguise itself also seems to be a legitimate process of XP or he could hide under/behind other processes that you see running in Task Manager if you can't see the execution.

  The malware would trick you into thinking you must use a System Restore Point, run a repair install or reinstall your XP from scratch when you really don't.

  Looking at the display in process Explorer, you want the CPU most to be associated with the system idle process.  It's 'free time' on your system, so more time there, more free.

  If you look at the graphs of performance and see red spikes (or not) double click the graphic in the upper left corner to display the graph to use.  Move the mouse over any pics to see what are the causes.  Even if the Spike has already scroll screen, you can still move the mouse over the edge to see what caused.  You can also just wait for a pic to happen and then see what caused the Spike.

  To help understand your process svchost and what is running under them, read this article and you will be smarter than the average bear:

  http://www.bleepingcomputer.com/tutorials/tutorial129.html

  Then with a few Google searches, you can watch every thing running behind your svchost process and Process Explorer and see what it is and decide if your configuration needs it or not and then decide what to do about this.

  If you think you have a svchost.exe process amok, run using Process Explorer, you can right-click that offensive svchost, properties and on the Services tab and son, you can see which runs under it.

  There is a CPU column it will expand (make the wider column) so that you can see CPU.  Maybe you can spot what background process is so CPU consumption under the svchost.exe process.   Stroll under the svchost process and you will find the problem.

  You can also see what is running under each svchost simply by pointing your mouse on the svchost.exe process.  Some of them have just a things working under them and some will have several things (I hope that all the legitimate XP services) and some will have a lot of things.

  If you have a svchost process that is afflicted, which runs under your afflicted?

  No running process must defy reasonable explanation.

  First, see what you can find using Process Explorer, then if nothing is obvious, additional advice.

• I had a windows update error 800736B 3... and I've done sfc scan I got error WFP resourse found corrupt files but unable to fix some problem... so please me cum on this problem

  I had a windows update error 800736B 3... and I've done sfc scan I got error WFP resourse found corrupt files but unable to fix some problem... so please me cum on this problem

  If the SFC does not a repair installation should work.
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.HTML?filter>

• I have corrupted files as determined by SFC scan. How can I fix that SFC could not fix?

  I used a (RegZooka) registry repair tool and must have damaged some files.  At the time I discovered, RegZooka could not help me, but another suggested that I have run the System File Checker.  I did and got a newspaper that shows some of the files that it could not fix.  How can I fix them?

  Hello.

  The manufacturer's recovery disks do not normally offer the options of 'work' to do a repair Installation

  If you still have problems with files SFC cannot repair, you can borrow a DVD of visits of Microsoft from a friend of friend or work, not the manufacturer's recovery disc and try a repair installation:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• I tried to record some live audio. I downloaded Wondershare Streaming Audio Recorder I opened the program - but could not hear the audio I tried to play.

  original title: sound problems

  Hello!

  I tried to record some live audio. I downloaded

  Wondershare Streaming Audio Recorder

  I opened the program - but could not hear the audio that I tried to play. I don't know if downloading this program is related to the problem.
  I opened Skype - and everything worked fine. I could hear, etc. But if I run an MP3 in Windows Media Player - I hear nothing!
  My sound is at the top.
  In my Volume mixer, I see:
  1 output device digital (SPDIF) bounce up and down. (but I don't)
  2 but applications: sounds of Windows, Windows Media Player and Google Chrome will not move. (but they are at the top).
  Any suggestions?
  Jews

  I managed to get the results of work. I don't know where come the SPDIF.

  I downloaded a new driver Realtek for audio from the computer. This corrects the problem.
  But I still want to know what happened.

• Windows Mail error message: "some of the files could not be found and could not be attached to the message." You want to send the message anyway? »

  original title: end this message appears "some of the files could not be found and he could not be attached to the message." You want to send the message anyway? "I am running Windows Vista Home Basic Edition
  Hello
  I'm so frustrated, this problem has arisen at a very bad time!

  I started to use Windows Mail a few months ago and have had no problems so far, since Thursday night, every time that I attach a file to an e-mail message when I click on send this message 'some files was not found and could not be attached to the message. You want to send the message anyway? "I am running Windows Vista Home Basic Edition.

  Thank you

  Hello

  Method 1:
  You can perform the steps of troubleshooting from the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Method 2:
  You can check if the default e-mail program is selected, follow the steps to do this:
  a. go to: Control Panel and go to default programs. Select Configure programs and Computer Defaults b. Select continues if the permissions window will appear
  c. left, double-click Custom, under Choose a default e-mail program, select Windows Mail.
  d. click Ok and close.

  Method 3:
  If none of the above steps are useful, then try to perform the system restore to the date when it was working fine.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  NOTE: System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  Method 4:
  If the file you are trying to download is opened, then it will not download, you can close the file completely and then try to download.

   

• SFC/SCANNOW can't fix the corrupted - files windows 7

  SFC/SCANNOW finds corrupted files, but cannot fix them in Windows 7 ultimate.

  I don't have the installation disc.

  Thanks a lot for your help!

  Hi MarkmBha,

  Thank you for visiting Microsoft Community.

  According to the description of the issue scan sfc could not fix corrupted files. I suggest you to refer to the suggestions provided in the below threads and see if it helps you to solve the problem. Make sure that you follow the steps that is marked as answer.

  sfc/scannow detected some files corrupted... unable to fix... What do I do?

  Note: This thread deals with Windows Vista but also applies to Windows 7.

  Keep us.

  Kind regards

• Unable to launch programs error: could not open rtl120.bpl file is not found, try to reinstall the program

  Original title: difficulties to open programs

  I keep trying to open different programs but get a message that says "could not open rtl120.bpl file is not found, try reinstalling the program.»  My problem is that some of these programs came with my package on the computer and if I uninstall it then I have to pay to re install a new program.  How can I solve this problem?

  Hi JenniferAS,

  1. is the issue limited with a particular program?

  2. what operating system is installed on the computer?

  3 did you changes to the computer before the show?

  It is a file associated with a program called Tune Up Utilities 2010.

  Tune up Utilities is a suite of utility software for Microsoft Windows designed to help manage, maintain, optimize, configure and troubleshoot a computer system.

  Method 1: Uninstall and reinstall Tune - Up Utilities 2010 and see if that helps.

  Step 1: Uninstall tune-up Utilities 2010.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Step 2: Re-install tune-up Utilities 2010.

  Download tune-up from here:

  http://download.tune-up.com/TUU2010/TU2010TrialEN-GB.exe

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Let us know if that helps.