SFC/scannow stuck at 70 percent and I get the message "Windows Resource Protection could not perform the requested operation".

Similar Questions

• When you try to run the SFC/scannow I get the following message: Windows Resource Protection could not perform a requested operation.

  When you try to run Fsc/scannow I get the following message: Windows Resource Protection could not perform a requested operation. Can anyone help?

  Original title: problems with Windows Live Update

  You run it from a (run as administrator) command prompt?

  SC Tom

• Error message "Windows Resource Protection could not perform the requested operation" when running SFC scan.

  As suggested, I tried to run scannow to repair Windows Vista.  I did, but then the scan only ran up to 76%, I received the message: Windows Resource Protection could not perform the requested operation. "How can I complete the scan and fix my Windows Vista computer

   
  Hi rdoran,
  You perform the steps from the administrator account?
  
  To determine which files can be repaired by the System File Checker tool, follow these steps:
  Step 1:
   
  NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.
  
  For how, see the SFC analysis details in the CBS. JOURNAL:
   
  * Open an elevated command prompt.
  
  * In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.
   
  * Close the elevated command prompt.
  
  * Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.
   
  * You can safely delete the sfcdetails.txt file later if you wish.
  Reply back with the details in the log file.
  
  If it does not help to complete the scan, you can complete the steps below and check out them.
  
  You're able to boot in safe mode ?
   
  Step 2:
   
  For more information on how to log in to safe mode, see the following Microsoft article:
   
  Startup options (including safe mode)
   
  If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.
   
  Reference:
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Step 3:
  
  In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
   
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• sfc/scannow error message - "Windows Resource Protection could not perform the requested operation".

  Recently, things are held in my computer after trying themes. I don't know what I fiddled with, but I do know something ExplorerFrame.dll in system32 and sysWOW64. I've tinkered with it to try to change my navigation settings. (The arrows in windows Explorer)  I don't know if that's the problem, but my main problem is when I try to save anything, or "save under" or try to save anything even in microsoft word or adobe reader, none of the folders in my navigation pane is there! It's just empty! I tried to solve this problem with sfc/scannow, but the message that I put in the title appears when it reaches 10%! I've tried everything literally! I tried running sfc/scannow offline, and it comes up with a message 'Protection of resources Windows could not start the repair service.' I also tried to check in my services to see if the Windows Module is manual in the startup type, and it is! The last thing I could think that I tried was the start in safe mode with command prompt, and it still does not. If anyone can help me, please! I've tried everything! * I forgot, I have try running CMD administrive rights, still won't work *.

  Thank you for the help, but I figured it out by myself. I replaced the old version ExplorerFrame.dll in system32 and sysWOW64 folders to a new! I managed to do it by copying the correct files to another computer and replacing them with the 'old' I have fiddled. Thanks for your help!

• Sfc/scannow error: Windows Resource Protection could not perform requested operation

  Hello

  I'm having a problem. All of my windows files are corrupted. When I changed the theme, it's always the basic theme of load. I don't know why. Maybe it's because I never have it patched with Universal Theme Patcher. I know that this will change the windows file, and windows he refused. I'm sorry windows.
  So I want to make a repair. I ran everything. When I ran the system restore, it is said that the antivirus blocked the system restore. I have search on this site, but there is no help. I take the Startup Repair, nothing changes. So my last hope is run cmd and type sfc/scannow.
  And then cmd stop the scan and says Windows Resource Protection could not perform requested operation. I'm looking for help on this site, I have nothing. I did not help
  Please help me. I don't want to reinstall my Windows. Any ideas are welcome. But when no one can help me, what should do?

  Hello

  Method 1:

  a. Click Start, type services.msc in the start search bar and press ENTER.
  b. Locate the Volume Shadow Copy service.
  c. click cliché instant volume, then select restart.
  d. now make a right-click Volume shadow copy, and then select Properties.
  e., under Startup type, select automatic.

   

  Method 2:

  Check your hard drive for errors.

  Follow the below mentioned article:
  Check a drive for errors
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Parse error SFC "Windows Resource Protection could not perform the requested operation".

  Original title: my computer is messed up, and I'm unable to fix
   
  (1) double click on files will open in a new window
  (2) not possible to delete several records
  I tried to find and implement several solutions found on these forums for the 1st problem listed above. I tried to go into folder options and disable double click open files option and I tried to replace with original system files according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folders-open-in-new-window-despite-folder-option/5fba3897-7655-4068-8992-2d8b20063b3f and nothing has worked. I tried to run the command prompt in administrator mode to scan files using the command "sfc/scannow" and even that did not work, as when checking for 59%, it says "Windows Resource Protection could not perform the requested operation"
  I tried to create new administrator user accounts and the problem persists.
  I am also unable to delete some files. Internet Explorer would be my best and later example. I ran microsoft update, it installed IE10, and I was unable to start IE. I have not found in the list of uninstaller, so I tried to delete the files manually but Icould do not, that I needed approval from "TrustedInstaller". I played a bit with permissions and gave myself all permissions, with the exception of special permissions (which was grey), and then he said I needed the permission of 'Administrators' when I tried to delete the folder. Well, I'm on my administrator account, what the devil?
  I ran some virus scans of Malwarebytes Anti-malware, Virus of Sophos, Microsoft Security Essentials, and 2013 Bitdefender removal tool and removed something taken before implementing ALL the solutions mentioned above attempts. Try a system restore after that these scans completed, I discovered that I had no restore point before the installation of the Microsoft fix - it (i.e. when I was first trying to tackle these questions)
  Is there something I can do?

  You could make a backup of the image to a DVD or disk.

  Renee

• SFC/scannow error message: Windows Resource Protection could not start the repair service

  I am trying to solve a problem with a HP Pavillion Vista laptop where I get a black screen after screen of the HP logo with a message that says "the file is maybe damaged. The file header checksum does not match the checksum calculated. »

  Hello

  I wrote a post on running a check offline that someone might find it useful,

  http://mikemstech.blogspot.com/2011/12/how-to-perform-offline-system-integrity.html

• sfc/scannow "Windows Resource Protection could not start the repair service".

  With the help of an elevated command prompt I'm unable to start the Sfc/scannow. I checked Services.msc and TrustedInstaller is started. It was suggested that I should check the logs for the System File Checker. However I can only interpret the newspapers and even if I could I do not know how to correct the error that lies in the newspapers. I was wondering if someone would be able to interpret the papers for me and guide me on how to correct errors that may be found in the newspaper that prevent me from running "Sfc/scannow" thanks.

  Since it is win 7 you cannot run DISM, so your only option is to do a repair install of win 7 dvd.

• SFC windows file protection could not run a scan of protected system files

  Hello

  First of all I am sorry for my English

  My problem is the application of file system auditor

  When run in the console, I get this message:

  Windows file protection could not initiate a scan of protected system files

  the specified error 0x000006ba code [the RPC server is unavailable]

  I also test the problem in safe mode and get the same message

  even I check the "SFCDisable" registry key and set it to zero but not solved the problem

  do you have any idea?

  Hello

  Try this:
  Click Start , then run... and type cmd and press enter.
  Now, type enable RpcSs SYSTEM_AUTO_START and press enter.

  Restart your PC and see if you can run sfc.

  If not then try a chkdsk which is what helped me with the same question :)

  --> I hope this helps! Please mark it as correct answer or vote if it does :)<>

  http://www.pcuk.biz - my website
  

  Info from Microsoft about phishing . Information from Microsoft on the fake security software

• I use XP and when I try to open Outlook Express I get this message. "Outlook Express could not be started because MSOE." DLL could not be initialized. Outlook Express is not installed properly

  Last night, everything seemed normal. When I try to open Outlook Express, I get this message. "Outlook express could not be started.  The application could not open message store outlook express.  Your computer may be out of memory or your disk is full.  Contact Microsoft Support for assistance. (0x800700C1, 193) "after this message, the message above was posted. I bought and ran a program called FixCleaner with the same results. I also cleaned my disk and more 66 G remains to use and have a lot of available memory.

  Thank you all for your help, but I gave up and took it to my computer guru and fixed it. He said there where a few old accounts in the computer and registry was messed up and it solved the problem and now it works.

  THANKS again!

• I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  Hello

  I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:

  http://support.Microsoft.com/kb/310123

  It will be useful.

• I try to uninstall itunes and I get the message"windows service install could not be accessed. can be installed incorrectly, how can I solve this

  Ive had problems with itunes, I guess to uninstall it. But I do every time I get the message "windows service install could not be accessed. can not be installed properly. How can I do to solve this problem. It is also difficult to install things, too

  Hello

  Try this FREE program to remove it

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  or track information from apple to the links below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  ____________________________________________________

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  ____________________________________________________

  Or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  ____________________________________________________

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149

• I am trying to download InDesign CC and I get a message that my OS is not supported.

  I am trying to download InDesign CC and I get a message that my OS is not supported - but your system requirements page says that my OS should be fine (Mac OS 10.8.5) - I am also using a browser that is acceptable (Firefox 40.0.2) - what could be the problem?

  You can download older versions (back to cs6) with a subscription of the cc.  Download and install Adobe Creative Cloud apps

• I'm trying to convert a pdf file to an excel file and I get a message saying that I am not connected to the internet, clearly I am connected.

  I bought the program to convert PDF files to Word, Excel, files etc.  I am logged in and try to convert a word file as an Excel file.  It shows that I am connected to my account, I guess, (it shows my name at the top) and I clicked the export file, choose the file to convert, click Excel in the box, to convert language was English, then click the Convert button blue.  It looked like it was working, then in seconds, said that I was not connected to the internet.  I tried to do this several times (on two different days) and get the same message, not connected to the internet.  I am connected to internet, I go to my browser and load anything.

  Thanks for any help!  I feel desperate to get this project underway.

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• I am havaing starting problems and I get a message that "AHCI Bios is not installled." How can I solve this problem?

  My computer turns off often. When the computer reboots, sometimes that it won't, it turns off again undertakes a few freezes on original start page. I'm a mess that indicates the 'AHCI Bios is not installed. A description of this Bios is "AHCI Option Ram Bios Revision 01.03.50."  Repair System reset several times but the problem persists.

  It is probably a problem with a defective hardware, since the PC reboots and freezes.

  Go to start > type in "memory" without the quotes. Choose the option of memory diagnostic when it appears. Choose the option to restart and RAM test now.

  Please tell us the result of the test.