"sfc/scannow" was not able to repair some files, one or more of which must be in the path of an installation of Vista SP2

I tried to install the SP2 of Vista for a few days now with no luck. Earlier today, I had a breakthrough and was finally able to install 'patch for Windows", which, after a reboot, enabled me to see the x 64 SP2 update in part"updates"of the control panel. When I tried to install that, he said he failed and gave me an error code. When I looked it up, it says try "sfc/scannow" in an elevated command prompt. The research a ton of lines of logs and errors, and after looking through, I could find these as (the least most) files problem-

WinSAT.exe
Amd64\HPF940AL. DLL
PresentationBuildTasks.dll
locale.NLS

My question is, are any of these files required for the installation of Vista SP2 to cross? Thanks in advance for any help offered, and more information is needed, I will gladly provide.

Extra balls (If I missed a few files problem, I'd appreciate a double check. WinSAT.exe was not who listed there, but it was listed above upward with no sign to be repaired)

2014-06-08 14:32:54, 000002f0 CSI Info [SR] verification complete
2014-06-08 14:32:54, 000002f1 CSI Info [SR] repair 8 components
2014-06-08 14:32:54, CSI Info 000002f2 transaction [SR] beginning verify and repair
2014-06-08 14:32:55, CSI Info 000002f3 hashes of file members \SystemRoot\WinSxS\amd64_microsoft-windows-i... nal-Core-locale-nls_31bf3856ad364e35_6.0.6001.18000_none_c6d6cc5d61a33307\locale.nls is not actual file [l:20 {10}] "locale.nls": "
Found: {l:32 b:wmYkySbnNnz5uBFxkqlZYwcQXpJF7VPzM7ezK / KmEmU =} expected: {l:32 b:KTJBpw1awVp4c5LesEXyEM / jfGsI24iQGrROSGLA9Tc =}
2014-06-08 14:32:55, 000002f4 CSI Info [SR] cannot repair the military record [l:20 {10}] "locale.nls" Microsoft-Windows-International-Core-Locale-NLS, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2014-06-08 14:32:56, CSI Info 000002f5 Member \SystemRoot\WinSxS\amd64_microsoft-windows-newdev_31bf3856ad364e35_6.0.6001.18000_none_6d94e6d8090688e9\newdev.dll file hashes are not actual file [l:20 {10}] "newdev.dll": "
Found: {l:32 b:lSyVpDkn/cMYwbuVSPH7Zs5/O8nFWBZqM2RQ9Au7lBc =} expected: n. b:KgBvBB/y3DPbBu/sLiebqGDKWCYtcAHle5YbZ1OItbU = l:32}
2014-06-08 14:32:56, 000002f6 CSI Info [SR] cannot repair the military record [l:20 {10}] "newdev.dll" Microsoft-Windows-NewDev, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2014-06-08 14:33, CSI Info 000002f7 Member \SystemRoot\WinSxS\amd64_prnhp001.inf_31bf3856ad364e35_6.0.6001.18000_none_2eef0719d90dbdd0\Amd64\HPF940AL file hashes. DLL is not actual file [l:36 {18}] "" Amd64\HPF940AL. "» DLL:
Found: {l:32 b:skEriPi1c9ksB0gEgVdygoY5xO9Ov8GD8 / 0CX4rugB0 =} expected: {l:32 b:mU / ap55UOjxtVzdrgCzt62CW4HxfZ + uALCVLOKOcCtU =}
2014-06-08 14:33, 000002f8 CSI Info [SR] cannot repair the military record [l:36 {18}] "" Amd64\HPF940AL. "» DLL"prnhp001.inf, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24 {12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-06-08 14:33, CSI Info 000002f9 Member \SystemRoot\WinSxS\msil_presentationbuildtasks_31bf3856ad364e35_6.0.6001.18096_none_9bc52ef038dbf0b3\PresentationBuildTasks.dll file hashes are not actual file [l:52 {26}] "PresentationBuildTasks.dll": "
Found: {l:32 b:cm3V/Ig0IdNHXGV6tzz8nMN2GvpxC0nujF4j/RbeCW4 =} expected: {l:32 = b:har0YuKv8pbmLU0w7b0vcjKcWyduPIiqUPx5HlaC02E}
2014-06-08 14:33, 000002fa CSI Info [SR] cannot repair the military record [l:52 {26}] "PresentationBuildTasks.dll" PresentationBuildTasks, Version = 6.0.6001.18096, pA = PROCESSOR_ARCHITECTURE_MSIL (8), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2014-06-08 14:33:02, CSI Info 000002fb Member \SystemRoot\WinSxS\amd64_prnhp001.inf_31bf3856ad364e35_6.0.6001.18000_none_2eef0719d90dbdd0\Amd64\HPF940AL file hashes. DLL is not actual file [l:36 {18}] "" Amd64\HPF940AL. "» DLL:
Found: {l:32 b:skEriPi1c9ksB0gEgVdygoY5xO9Ov8GD8 / 0CX4rugB0 =} expected: {l:32 b:mU / ap55UOjxtVzdrgCzt62CW4HxfZ + uALCVLOKOcCtU =}
2014-06-08 14:33:02, CSI Info 000002 fc [SR] cannot repair the military record [l:36 {18}] "" Amd64\HPF940AL. "» DLL"prnhp001.inf, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24 {12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-06-08 14:33:02, 000002fd CSI Info [SR] this element is referenced by [l:164 {82}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.0.1.18000.936330 - 161_neutral_GDR" "
2014-06-08 14:33:03, CSI 000002fe hashes for Member file Info? \C:\Windows\Speech\Engines\SR\en-US\af031033.am are not real file [l:22 {11}] "af031033.am": "
Found: {l:32 b:cq + 1NYUaITMpBYllzFX/LW74KgeL5QGxQ0 + PBG / 4w4 =} expected: {l:32 b:oZ + J3PjqKUUdN1O + pJQYQ8z + 5SccD + uPMQHFfMlQalE =}
2014-06-08 14:33:03, 000002ff CSI Info [SR] repair corrupted file [ml:520 {260}, l:76 {38}] '------? \C:\Windows\Speech\Engines\SR\en-us"\[l:22{11}]"af031033.am' of the store
2014-06-08 14:33:03, info CSI 00000300 WARNING: file [l:22 {11}] "af031033.am" in [l:76 {38}] '-? ' "" \C:\Windows\Speech\Engines\SR\en-us' switching property
Old: Microsoft-Windows - SpeechRecognizerENU.ale, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
New: Microsoft-Windows - SpeechRecognizerENU.ale, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-06-08 14:33:03, info CSI 00000301 Member \SystemRoot\WinSxS\msil_presentationbuildtasks_31bf3856ad364e35_6.0.6001.18096_none_9bc52ef038dbf0b3\PresentationBuildTasks.dll file hashes are not actual file [l:52 {26}] "PresentationBuildTasks.dll": "
Found: {l:32 b:wskm5ChU9DmxqusVLNiJTnb8sdPBBokQ8Eb8nO/P5/Y =} expected: {l:32 = b:har0YuKv8pbmLU0w7b0vcjKcWyduPIiqUPx5HlaC02E}
2014-06-08 14:33:03, info CSI 00000302 [SR] cannot repair the military record [l:52 {26}] "PresentationBuildTasks.dll" PresentationBuildTasks, Version = 6.0.6001.18096, pA = PROCESSOR_ARCHITECTURE_MSIL (8), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2014-06-08 14:33:03, info CSI 00000303 [SR] this element is referenced by [l:166 {83}] "' Package_4_for_KB948610 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.0.6001.2123.948610 - 322_neutral_GDR" "
2014-06-08 14:33:04, repaired Info CSI 00000304 [SR] file \SystemRoot\WinSxS\Manifests\\[l:20{10}]"newdev.dll" by copying from backup
2014-06-08 14:33:04, info CSI 00000305 hashes for Member file? \C:\Windows\System32\newdev.dll are not real file [l:20 {10}] "newdev.dll": "
Found: {l:32 b:lSyVpDkn/cMYwbuVSPH7Zs5/O8nFWBZqM2RQ9Au7lBc =} expected: n. b:KgBvBB/y3DPbBu/sLiebqGDKWCYtcAHle5YbZ1OItbU = l:32}
2014-06-08 14:33:04, info CSI 00000306 [SR] repair file corrupted [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"Newdev.dll' of the store
2014-06-08 14:33:04, info CSI 00000307 hashes of file members \SystemRoot\WinSxS\amd64_microsoft-windows-i... nal-Core-locale-nls_31bf3856ad364e35_6.0.6001.18000_none_c6d6cc5d61a33307\locale.nls is not actual file [l:20 {10}] "locale.nls": "
Found: {l:32 b:wmYkySbnNnz5uBFxkqlZYwcQXpJF7VPzM7ezK / KmEmU =} expected: {l:32 b:KTJBpw1awVp4c5LesEXyEM / jfGsI24iQGrROSGLA9Tc =}
2014-06-08 14:33:04, info CSI 00000308 [SR] cannot repair the military record [l:20 {10}] "locale.nls" Microsoft-Windows-International-Core-Locale-NLS, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
2014-06-08 14:33:04, info CSI 00000309 [SR] this element is referenced by [l:164 {82}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.0.1.18000.936330 - 185_neutral_GDR" "
2014-06-08 14:33:04, CSI 0000030 has hashes for Member file Info? \C:\Windows\System32\locale.NLS are not real file [l:20 {10}] "locale.nls": "
Found: {l:32 b:wmYkySbnNnz5uBFxkqlZYwcQXpJF7VPzM7ezK / KmEmU =} expected: {l:32 b:KTJBpw1awVp4c5LesEXyEM / jfGsI24iQGrROSGLA9Tc =}
2014-06-08 14:33:04, CSI Info 0000030b hashes of file members \SystemRoot\WinSxS\amd64_microsoft-windows-i... nal-Core-locale-nls_31bf3856ad364e35_6.0.6001.18000_none_c6d6cc5d61a33307\locale.nls is not actual file [l:20 {10}] "locale.nls": "
Found: {l:32 b:wmYkySbnNnz5uBFxkqlZYwcQXpJF7VPzM7ezK / KmEmU =} expected: {l:32 b:KTJBpw1awVp4c5LesEXyEM / jfGsI24iQGrROSGLA9Tc =}
2014-06-08 14:33:04, CSI Info 0000030 c [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"locale.NLS '; source file in the store is also corrupted
2014-06-08 14:33:04, CSI Info 0000030 d repair results created:
POQ 114 begins:
0: move the file: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\8c0159154883cf0125320000380ccc0e._0000000000000000.cdf-ms', Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms'
1: move the file: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\ac4f59154883cf0126320000380ccc0e.$$.cdf-ms', Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms'
2: move the file: Source = [l:244{122}]"\SystemRoot\WinSxS\Temp\PendingRenames\2c6a5f154883cf0127320000380ccc0e.$$_speech_engines_sr_en-us_3201cbb7cd315cd0.cdf-ms', Destination = [l:156{78}]"\SystemRoot\WinSxS\FileMaps\$$_speech_engines_sr_en-us_3201cbb7cd315cd0.cdf-ms'
3: move the file: Source = [l:254{127}]"\SystemRoot\WinSxS\Temp\PendingRenames\3c915f154883cf0128320000380ccc0e.$$_speech_engines_lexicon_en-us_bd71d54bf658e12b.cdf-ms', Destination = [l:166{83}]"\SystemRoot\WinSxS\FileMaps\$$_speech_engines_lexicon_en-us_bd71d54bf658e12b.cdf-ms'
"4: hard link file: Source = [l:260 {130}] ' \SystemRoot\WinSxS\x86_microsoft-windows-s... chrecognizerenu.ale_31bf3856ad364e35_6.0.6000.16386_en-us_cbfb04a3abf30016\af031033.am', Destination = [l:100 {50}] '------? \C:\Windows\Speech\Engines\SR\en-US\af031033.am ".
5: create file: file = [l:228{114}]"\SystemRoot\WinSxS\amd64_microsoft-windows-newdev_31bf3856ad364e35_6.0.6001.18000_none_6d94e6d8090688e9\newdev.dll', attributes = 00000080
6: move the file: Source = [l:164{82}]"\SystemRoot\WinSxS\Temp\PendingRenames\3c6c7a154883cf0129320000380ccc0e.newdev.dll', Destination = [l:228{114}]"\SystemRoot\WinSxS\amd64_microsoft-windows-newdev_31bf3856ad364e35_6.0.6001.18000_none_6d94e6d8090688e9\newdev.dll'
7: move the file: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\1c09bc154883cf012a320000380ccc0e.$$_system32_21f9a9c4a2f8b514.cdf-ms', Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_system32_21f9a9c4a2f8b514.cdf-ms'
8: hard link file: Source = [l:228 {114}] \SystemRoot\WinSxS\amd64_microsoft-windows-«
2014-06-08 14:33:04, newdev_31bf3856ad364e35_6.0.6001.18000_none_6d94e6d8090688e9\newdev.dll CSI Info", Destination = [l:68 {34}] '------? \C:\Windows\System32\newdev.dll ".
9: move the file: Source = [l:220{110}]"\SystemRoot\WinSxS\Temp\PendingRenames\fccae2154883cf012b320000380ccc0e.$$_performance_02bd33cc045df684.cdf-ms', Destination = [l:132{66}]"\SystemRoot\WinSxS\FileMaps\$$_performance_02bd33cc045df684.cdf-ms'
10: move the file: Source = [l:234{117}]"\SystemRoot\WinSxS\Temp\PendingRenames\4cffe5154883cf012c320000380ccc0e.$$_performance_winsat_ac47b36afb2fa68e.cdf-ms', Destination = [l:146{73}]"\SystemRoot\WinSxS\FileMaps\$$_performance_winsat_ac47b36afb2fa68e.cdf-ms'
11: move the file: Source = [l:254{127}]"\SystemRoot\WinSxS\Temp\PendingRenames\4c70e8154883cf012d320000380ccc0e.$$_performance_winsat_datastore_34fe222e5de27d61.cdf-ms', Destination = [l:166{83}]"\SystemRoot\WinSxS\FileMaps\$$_performance_winsat_datastore_34fe222e5de27d61.cdf-ms'

Hello

We look also at the bottom line in the journal of the SFC, not just specific entries along the way.

He would often have similar entries, but the line of low said unable to fix or repaired successfully.

_______________________________________

  • Once the process is complete, you may receive one of the following messages:

  • Windows resource protection did not find any breach of integrity.

    This means that you have not all missing or damaged system files.

  • Windows resource protection could not perform the requested operation.

    To resolve this issue, perform the analysis in safe mode System File Checker

    (http://windows.microsoft.com/en-in/windows/start-computer-safe-mode)

    and make sure that the files PendingDeletes and PendingRenames exist under %WinDir% \WinSxS\Temp.

  • Windows resource protection finds files corrupted and managed to fix it. Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log.

    To display detailed information on the analysis of system files and restore, go to the display of the details of the System File Checker process.

  • Windows resource protection found corrupt files but was unable to fix some of them. Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log.

    To repair the corrupted files manually, see the details of the System File Checker process to find the damaged file, and then manually replace the corrupted file with a good copy of the file.

If the message failed to fix some files and they are not the settings.ini errors (which can be ignored), you may need to perform a repair upgrade Installation.

"How to perform a repair for Vista Installation"

http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

________________________________________

Is to install Service Pack information:

Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

It will also tell you which SP you have installed.

Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

http://support.Microsoft.com/kb/947366

See you soon

Tags: Windows

Similar Questions

  • I miss files Sfc/scannow but not able to repair

    Hi, I am a user of windows since 1999... I went through various uptades... But this windows 7 when I installed the first had damaged some startup files... I ran the sfc scannow as Administrator option... it verified data and said that he cannot repair the startup files... Because of that now sometimes I get the blue screen of death... So what should I do to solve my problem... Please help me with detailed steps... as quickly as you can

    Thank you

    Chebli

    Chebli

    Select Start, all programs, accessories, right-click right-click command prompt and click Run as administrator in the menu dropdown. Type or copy / paste: findstr/c: "[SR]" %windir%\Logs\CBS\CBS.log > '% userprofile%\Desktop\sfcdetails.txt' and press the ENTER key. You will find a sfcdetails.txt file on your desktop.

    "Please note there are three spaces in the command: findstr - c/c/c, between [SR]" and%windir% between CBS.log and > ' % userprofile .

    Please download a copy of your file sfcdetails.txt on your OneDrive as a shared file and post a link here. Enter sfcdetails.txt in the search box above the Start button and press the ENTER key to locate the file created.

    Note The Sfcdetails.txt file contains details of every time that the System File Checker tool has been run on the computer. The file contains information about the files that are not repaired by the System File Checker tool. Check the date and time entries to determine the problem files that were found last time that you ran the System File Checker tool.

    Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

    Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

    To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

    For assistance OneDrive see paragraph 9.3:
    http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  • Microsoft C++ runtime error. When I am downloading World Of Warcraft. Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. (I ran sfc/scannow in the command window twice)

    I am trying to download the demo version of 'WoW' World of Warcraft. I get to the part where he is configing its parameters to my computer and get a runtime error that something caused my program is complete. I read the other posts which had similar problems so I ran sfc/scannow in the command prompt window. It reads...  Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. I've shortened, but it is easy to understand that there is a question that the scan will not fix. I tried to access the CBS.log newspaper and opened a text doc, that was a bunch of YYYYYYYYY. I'm a little lost here and my 10 free WoW trial days is weathering away without me =)

    Please help, thanks

    Borrow a Microsoft Vista DVD(not Dell, HP, etc Recovery DVDs) to do a repair installation

    If you see a startup Neosmart repair disk download here, this is NOT what you want.

    You want a good Vista DVD that contains the operating system files.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If you need a recovery media for your laptop back to factory settings, read this info:

    How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon. Mick Murphy - Microsoft partner

  • sfc scannow windows resource protection found corrupt files but was not able to repair

    Original title: sfc/scannow

    Hello.

    I tried to repair internet explore in windows vista with the command prompt

    I've done sfc /scannnow and it gave me

    Windows resource protection found corrupt files, but could not too distressed some of them

    details are provided in the cbs.log windir\logs\cbs\cbs.log newspaper

    for example c:\windows\logs\cbs\cbs.log

    I found them the corrupted files, but I have no idea on how to fix or remove.

    UH how to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

    don't tell me no how to fix or remove.

    I have windows vista edition Home premium 64-bit service pack 2.

    Hey Crystal

    If they are difficult to pierce the CD to Windows Media Player 11 try these links below it should help them or at least show them in the right direction on how to burn a CD. Hope that helps some.

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/burn

    http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  • SQL Developer 4.0 EA Winsdows 7 was not able to install some modules

    Hello

    Environment: windows 7

    SQL DEV 4.0 EA

    JDK 1.7.0.25

    I get the following error when starting upwards:

    Warning - could not install some modules: oracle.icons - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\external\oracle.icons.jar: not found bundle:oracle.icons oracle.external.timing - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\external\oracle.external.timing.jar: not found bundle:oracle.external.timing oracle.ide_boot - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\ide\lib\ide-boot.jar: not found bundle:oracle.ide_boot oracle.javatools_nodeps - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\external\oracle.javatools-nodeps.jar: not found bundle:oracle.javatools_nodeps oracle.external.jxlayer - org.netbeans.InvalidException : Netigso: C:\oracle\sqldeveloper\external\oracle.external.jxlayer.jar: not found bundle:oracle.external.jxlayer oracle.peek - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\ide\lib\peek.jar: not found bundle:oracle.peek org.eclipse.equinox.common - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\equinox\org.eclipse.equinox.common_3.6.0.v20100503.jar: not found bundle:org.eclipse.equinox.common oracle.javatools_jndi_local - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\external\oracle.javatools-jndi-local.jar: not found bundle:oracle.javatools_jndi_local oracle.external.xdk - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\external\oracle.external.xdk.jar: not found bundle:oracle.external.xdk oracle.external.miglayout - org.netbeans.InvalidException : Netigso: C:\oracle\sqldeveloper\external\oracle.external.miglayout.jar: not found bundle:oracle.external.miglayout oracle.java_annotations - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\ide\lib\annotations.jar: not found bundle:oracle.java_annotations oracle.external.berkeleydb - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\external\oracle.external.berkeleydb.jar: not found bundle:oracle.external.berkeleydb oracle.ide_print_api - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\ide\lib\ide-print-api.jar: not found bundle:oracle.ide_print_api oracle.external.balishare - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\external\oracle.external.balishare.jar : not found bundle:oracle.external.balishare oracle.javaxide - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\ide\lib\javax-ide.jar: not found bundle:oracle.javaxide oracle.jgoodies_looks - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\jlib\jgoodies-looks.jar: not found bundle:oracle.jgoodies_looks oracle.jewt_core - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\jlib\jewt4.jar: not found bundle:oracle.jewt_core oracle.uic - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\ide\lib\uic.jar: not found bundle:oracle.uic oracle.javatools - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\ide\lib\javatools.jar : not found bundle:oracle.javatools oracle.idert - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\ide\lib\idert.jar: not found bundle:oracle.idert oracle.ide - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\ide\extensions\oracle.ide.jar: not found bundle:oracle.ide oracle.ide_osgi - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\ide\lib\oracle.ide.osgi.jar: not found bundle:oracle.ide_osgi oracle.ideimpl.peek - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\ide\extensions\oracle.ideimpl.peek.jar: not found bundle:oracle.ideimpl.peek oracle.ide.searchbar - org.netbeans.InvalidException: Netigso: C:\oracle\sqldeveloper\ide\extensions\oracle.ide.searchbar.jar : not found bundle:oracle.ide.searchbar

    Any ideas?

    Best regards Erik

    Hello

    He solved. Remove all files from developer sql developer .../AppData/Roaming/SQL /... did the trick.

    Best regards Erik

  • I am not able to copy some files from my dvd game

    When I try to copy DVDs to anyone of my HARD DRIVE some extracted files stuck and do not copy and displays a message "Can can't READ FROM THE SOURCE FILE or DISK."

    Sounds like the disc is damaged.  Contact the game company and see if a replacement is available.

  • Since I have a virus that I was not able to open any file from my office

    I can't open all the files in my office because I got a virus

    Run fix .exe from Doug Knox and then perform in-depth malware analysis.

    http://www.dougknox.com/XP/file_assoc.htm

    http://www.elephantboycomputers.com/page2.html#Removing_Malware

    MS - MVP - Elephant Boy computers - don't panic!

  • Windows 8.1 Help! I was not able to open Illustrator CC 2014 for more than 2 weeks, error: could not complete the requested operation.

    I've been chatting with technical support and made of multiple remote access connections and nothing has worked.

    Fixed. Clean install of Windows.

    Re-install everything.

  • I was not able to install Microsoft Security Essentials, AUTODESK (no software) and some other applications.

    Hello

    I have a lot of problem with the installation of some software in Windows 7. I was not able to install Microsoft Security Essentials, AUTODESK (no software) and some other applications. Anyone have an idea what is wrong? Thank you very much.

    Original title: installation problem

    Hello

    Please keep us updated on the status of the issue.

    I suggest you try the following steps and check if it helps.

    a. you restart, and then press F8 after the bios screen comes up to bring up the windows boot options menu.

    b. Select "safe mode with command prompt" and press ENTER.

    (c) in the command prompt, type del c:\windows\system32\msiexec.exe and press ENTER.

    d. restart the computer and make sure that the Windows Installer service is set to automatic and started.

    e. try to install the Microsoft security essentials again.

    See also:
    I can't install Microsoft Security Essentials
    http://Windows.Microsoft.com/en-us/Windows/i-cant-install-Microsoft-Security-Essentials

    If you have any question, please ask your question on the forum virus and malware.

    Forums of viruses and malware
    http://answers.Microsoft.com/en-us/protect/Forum/MSE?tab=threads

    Because AUTOCAD, please ask question about Autodesk community.

    Autodesk community
    http://www.Autodesk.com/community

    I hope this helps.

    Thank you

  • Help and Support was not able to start

    When I open help and Support Windows, it shows me the following error message:

    "Help and Support was not able to start
    For more information, contact your system
    administrator or visit
    http://windowshelp.Microsoft.com.

    (I'm the system administrator only)
    I am facing this problem for more than a year.
    System details:

    Windows Vista Edition Home Premium SP2 32-bit
    Internet Explorer version 9

    Hi Aditya,

    This could be caused by the virus or corrupted system files on the computer.

    Follow the following troubleshooting methods:

    Method 1:

    Download Microsoft Safety Scanner, then scan your computer for viruses and malware then check how it works.

    You can download Microsoft Safety Scanner from the link "scan to Microsoft Security.

    Note:  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.

    Method 2:

    Run System File Check to fix the corrupted system files and then check how it works.

    See the link "How to use the file system tool Checker to troubleshoot system missing or damaged files on Windows Vista or Windows 7" to run the System File Check.

    Note: It can ask the Windows DVD difficulty and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.

    If the problem persists, please answer. We would be happy to help you.

  • Solitare opens suddenly, with cards staked in a stack to the top left corner. I was not able to detach them to play a game. Help!

    Solitare opens suddenly, with cards staked in a stack to the top left corner.  I was not able to detach them to play a game.  Help!

    Hi Perren7,

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

    2. type the following command and press ENTER:

    sfc/scannow

    3. the sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    If that is not enough then try to create a new user account and check what is happening. To create a new user account

    1. to open user accounts, click the Start button, select Control Panel, click user accounts and parental control, and then click user accounts.

    2. click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    3. click on create a new account.

    4. type the name you want to assign to the user account, click an account type, and then click on create an account.

    If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.

    Difficulty of a corrupted user profile

    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I use a mac pro 2x3GHz. I don't know what I did, but since a few days I was not able to play videos from web sites like youtube. Can you help me

    I use a mac pro 2x3GHz. I don't know what I did, but since a few days I was not able to play videos from web sites like youtube. Can you help me?

    Hello joebat,

    It seems that some of your plugins (Shockwave Flash 10.1 r102) might be buggy or obsolete. To check for updates, please visit the plugincheck page. If this does not resolve the problem, try to start Firefox with the disabled modules and see if it helps at all. If so, delete the Shockwave Flash plugin and maybe reinstall or uninstall Firefox and do a new clean install.
    If that is not yet solved the problem, try the following troubleshooting steps: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html

    Thank you for your patience and please let me know how it goes.

  • I can get the signed to Hotmail, but I can't read my mail. Sorry, there is a problem with Hotmail right now Hotmail was not able to complete this application. Microsoft may contact you regarding any issue you are reporting.

    There are ten days began to have problems with Hotmail. Could isgn in but get the following message is displayed.
    Sorry, there is a problem with Hotmail now
    Hotmail was not able to complete this application. Microsoft may contact you regarding any issue you are reporting.
    I can email again and again my contacts but thats all.
    I then tried to do with Internet Explorer and it works fine. I don't like it is because I have problems with some Web sites.

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

    Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I get the message when you set up a new user "a temporary user profile is loaded because Windows was not able to connect you with your local profile."

    Dear all,

    I have a Windows PC in my office. Because of some configuration issue, I deleted the domain user and tried to connect to the system with the same user credentials. It identify you with the credentials of the user, but I get a message saying: "a temporary user profile is loaded because Windows was not able to connect you with your local profile."
    This system is joined to the domain and the profile is an Active Directory user.
    Here are the details of the event ID:

    Details

    Product:

    Windows operating system

    Event ID:

    1515

    Source:

    Userenv

    Version:

    5.2

    Symbolic name:

    EVENT_PROFILE_DIR_BACKEDUP

    Message:

    Windows has backed up this user's profile. Windows will automatically try to use the saved profile the next time the user connects.

    Explanation

    A temporary user profile is loaded because Windows was unable to connect with your local profile.

    A possible cause of this is if your local profile has been corrupted or that you no longer have the correct privileges for profile records.

    Note: Any changes made to the temporary profile is lost once you disconnect.

    User action

    Search the profiles additional events in the event log for more information on the reason why this happened or contact the system administrator for further assistance.

    There is currently no article for this specific error Microsoft Knowledge Base or an event message. For more information on other technical support options, you can use to find answers online, see http://support.microsoft.com/default.aspx.

    Please, help me to create the same user profile in the system with formatting system.

    Hello

    I suggest you to refer to this link and check if it helps:

    http://support.Microsoft.com/kb/947215

    It will be useful.

Maybe you are looking for