Shade of color shows ONLY shades of gray on the gradient layer...?

Similar Questions

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• I tried to connect wifi with my laptop, including wireless I use for a month now, but shows only 2 blue screens without the world down on the right, and he said "unidentified network".

  "Unidentified network".

  Hello, today I tried to connect to my friends wifi with my laptop, including wireless I use it for a month now and its impossible! Down right it shows only 2 blue screens without the World Cup, and he said "unidentified network"! I tried several solutions, I found online as 'install the protocols Internet 4 and 6', make sure that I have the ip auto get same restore point system and safe mode with network! Nothing works... my friend connects with his laptop and I can connect with my smartphone, except my laptop! I have windows vista... Please help me thanks

  Go to: Control Panel, Manager of Devic, adapters to extend your network, click with the right button on your wireless network and click on uninstall.

  Do not put a check in the box: remove the software driver for this device.

  Restart your computer and Windows will install your wireless network.

  If the problem persists, see if your computer manufacturer has an updated driver.

  These articles may help:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://support.Microsoft.com/kb/313242

• Reduction of red eyes with shades of gray on the face

  I used the reduction of red eyes and got the grey shadow son my face in the photo, how to remove?

  I used the reduction of red eyes and got the grey shadow son my face in the photo, how to remove?

  ===================================
  I assume you are using Windows Live Photo Gallery
  for editing? Back to the original version of the photo...
  Left click in the option "Cancel" until the unwanted
  Edit is deleted or until the gray option out.

  When you use the "Fix red eye"... enlarge the eye by
  Zoom with. Carefully drag the box so it only
  borders the red eye area. Releasing the
  mouse button activates the change. In some cases, you
  may need to use the tool 'fix red eye"more than once.

  If you make a box larger than the red area of the eye
  and if there are shades of red in the region of the face... they can
  be obscured. The tool detects red in the selection box
  but has no way of knowing if it's in the eyes or elsewhere.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Sidebar calendar shows only orange... not the data either

  My calendar loads in the bar but shows only an orange page.  There is nothing else... no data at all. I tried the tools without result; It only allows me to remove the calendar.

  If it's just the calendar gadget that gives you trouble, you should be able to simply re - record a single. DLL to rectify a calendar gadget that looks like this,

  
  First remove the existing calendar gadget, and then click Start or press on the key and type cmd but don't hit. Search for CMD in the list above and right-click and select run as administrator. Confirm the warning of the DSU and provide credentials if requested.

  The open command window, type.

  Regsvr32.exe vbscript.dll
  ... and click on . You will receive a popup confirmation as follows,

  

  Restart the computer and add the calendar on the desktop gadget. It should now work as follows,

  

  If the gadget still does not work, you can try a much more aggressive approach to my solution on this page.

• How can I copy and paste a gradient of color of a document and then use the gradient on another document?

  I make business cards. On the back of the cards, there are two lines with gradients. Here is a map with a gradient of magenta. I want to select the two lines and change the magenta gradient to the orange gradient from the file below. How can I do this? (I don't want to copy the orange lines to a paste, then move them on those magenta). I just want to select the magenta lines and change their color to orange gradient. This will ensure absolute alignment. I want to repeat the process with several other gradients too. Thank you.

  

  

  David,

  If I (put) understand, you can:

  (1) a way to copy orange gradient of magenta paper path degraded;

  (2) select the two paths of magenta gradients and change the fill to none;

  (3) select the orange gradient path;

  (4) select the two paths of magenta gradients and replace the gradient fill.

  That should give you the desired replacement. For multiple uses of the same gradient, you can consider a shade of gradient.

• DeskJet 5500 prints color cartridge 57 but your gray of the 58 photo color cartridge

  My deskjet 5550 is supposed to print color photo with the 58 cartridge inserted into the cartridge slot 2. It has suddenly stopped making and now print only the dull grey tone. I replaced the cartridge with a new one and got the same result. Print the same file using the 57 cartridge to slot 1 still gives the color. Replacing the driver produces no change. I'm on a Mac and I'm printing from iPhoto. Having checked that no filter is in use. Any ideas, what could be wrong and how to fix it?  Thank you.

  The cartrdiges 57 and 58 are necessary all to print the photo. The 57 a Cyan, Magenta and yellow. The 58A Photo Black, Light Magenta and Light Cyan. The printer can print photos with the 57 by itself, but the 58 by itself will not be able to print grayscale because there no yellow. In photo printing normal both cartridges are used together, the 57 provides vivid colors and the 58 provides subtle shades and black areas. When you print on plain paper 56 cartridge replaces the 58. The 56 was ink black pigment which is good for text but not used on photographic support. Regards, Bob Headrick, MS MVP printing and imaging

• is no longer able to see the 8 tiles frequently open - show only 4 now - must use the command/scroll down to min size of the mosaic each time

  With the new version of firefox - not able to see tile 8 discovers each tab opening now - only 4 show now - have to use mouse scrolling and the control key to minimize the size of mosaic to see several cages - used to 8 plates and 8 slabs shown whenever a new tab was opened. Basically, I wan to be able to set the screen for 8 tiles not only 4 each time I open a new tab.

  Hi, as you know, you can change the number of tiles on the Page of the new tab to zoom in or out (Ctrl and + key, or Ctrl and - key).

  If you want to keep the same zoom setting when a new tab is clicked: Type Subject: config in the address bar, press ENTER, accept the warning, scroll to browser.newtab.preload and double-click on it to change the 'value' of true to False.

  It is also possible about: config to change the maximum number of tiles by scrolling to the browser.newtabpage.columns (or Rows), then right-click > modify to set a new number of 'value '.

  As an alternative, you might like to try the add-on new tab tools.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• How can I show only music actually present on the iphone?

  I recently had to reformat completely in iPhone 6s. Now, the 'Music' application shows all the music on my laptop iTunes library: I just want to see music actually physically present on the iPhone. I don't want to see I have to listen to or download music. There is a way to do it, but I forgot where the toggle. Can anyone help?

  Start the music app and click the artists tab (the drop down menu) in the Center and go to only downloaded music > on.

• Filter to show only images that are within the project pro first itself offline?

  I tried to google I can think, all directions and results are always "how to add a link to the files offline in the first" so this isn't my problem.

  In After Effects, there is a trick very convenient to type "missing" in the search prompt in the project Panel, and it will show you precisely all assets being referenced by AE offline. I looking for this kind of feature in Premiere Pro CC 2014 (I don't have not yet went to CC2015 I'm nearing completion on an important project).

  The challenge that I face, it is a huge file (feature documentary) with literally thousands of assets which has many sequences that have endured many iterations. And even if I don't get a "media is offline" WARNING when I OPEN the file, I get a warning of "material offline is present in this export and will be encoded using the chart of media offline" whenever I have to export. I'm trying to see if there is a filter that will show me ONLY the offline files that are always reference by Premiere Pro so I can remove it, because throughout most of them are likely obsolete.

  Any help out there?

  

  There is an option in the metadata view to turn on hardware offline.

  Click on the Panel of the menu of the project for metadata display window...

• make a text box show only after a branch of the page

  Hello
  
  I have a form on apex 3.0 page. This form has a 2 textarea element and configuration of width for 110 and the maximum width is 500. After a user to enter data on all points, when he clicks on support I branch to another page that has been copied from the page of the form, but this time I want to make the textarea elements and other elements appearing on this page read-only, I have no success with making the textarea a readonly. I changed the readonly condition point to say always, it worked bu it shows the data on a long line it does'nt keep the same width as the text box has.
  
  I hope that I can get an answer soon. Thank you.
  
  Kind regards
  Sofia.

  In the attributes of your text box HTML form elements put disabled = "yes" or readonly = "readonly".

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• List box and the choice list showing only 25 first items on the list

  Hi people,

  I implemented a component selectOneChoice for locations and a selectOneListbox for asset groups. Two display objects are based on relevant queries. When you try to choose a location, I see only the items in 25 list first in the drop-down list. It's the same thing with the Group of assets held as well. Queries provide a set of data that has more than 25 records of each of the db. Are there property that must be set for these components in JDeveloper? I use Jdev Studio ver 12.1.3.0.0. Please, share your ideas.

  Thank you

  25 is the size of the default range for the iterator.

  Components as selectOneChoice does not support paging so you must set this value-1 (select your iterator pageDef and replace the RangeSize property)

  Dario

• show only five dates Monday from the current date.

  All,

  I have the column date in dd/mm/yyyy format, I need to show the rear 5 date of Monday, from the current date.

  in the warehouse we t have the column NAME OF THE DAY.

  Help me.

  
  

  Thank you

  
  

  CASE WHEN DAYOFWEEK (DATE_FIELD) = 2

  AND

  DATE_FIELD > TIMESTAMPADD (SQL_TSI_DAY-35, CURRENT_DATE)

  AND DATE_FIELD<>

  THEN

  DATE_FIELD

  END

  Please check and change-35, according to the needs.

  Please check if it is correct.

• File AVI DV 9 GB (45 minutes) shows only 02:50 minutes in the timeline.

  Hi, I have loaded an AVI DV 9 GB file (45 minutes) in Premiere Pro CS6, but it shows a few minutes 02:50 in the timeline. I loaded the files a lot more time in my calendar and edited without any problem. I also tried to decode the AVI file, but this reduces the quality too. Can someone tell me how to solve this problem?

  Thanks John, I solved using the original soundtrack of the DV with WinDV. The new AVI file gives no problem (even if the installation program looks the same). I still don't know why the old 9 GB AVI file did not load completely within the editing timeline.

• I have files mp4 with 4 audio channels, but when I import it into the first it shows only a single channel

  I have the mp4 with 4 channel audio file that is not in the audio channel. When I import in the first it shows only 1 channel. In the project window, I try to find other audio channels on option audio channel (Edit-> audio channels) but it shows other channels. How active other audio channels and retrieve audio sound?

  When you go to interpret, I chose multichannel, then specified 4 tracks.