shaded in hp elite desktop 8300 bios virtualization options

Similar Questions

• M9520f BIOS virtualization

  Just bought an Elite m9520f before I bought it in the store, I restarted a m9510f / m9500f and there was a virtualization option however I don't find it on this m9520f even after updating the BIOS 5.32... his machine is a 64 bit all boards may use a different bios? Thank you

  Found the solution on another forum. I had to switch to a processor Q9300 Q8300 series does not support virtualization.

• HP ENVY 17-n013na: the Legacy BIOS boot option does not work

  Support dear HP team,

  I recently bought for laptop HP ENVY 17-n013na .  It came with Windows 8.1. I have to install Windows 7. Unfortunately, the legacy in BIOS boot option does not work for me. Here is detailed information:

  BIOS version: F.04 Rev 5.0

  I tried updating to the latest version of the BIOS on the Support site.

  To activate the option to boot legacy, I followed the following steps:

  • Entered, BIOS configuration utility
  • Go to the System Configuration
  • > Boot options
  • Changed the setting to the Legacy Support on " Enabled"
  • F10 - save changes & exit

  Now, after the restart, if I go once more, configuration of the BIOS Legacy Support is set to disabled. Whenever I have change to active BIOS, Save & Exit, it is up to the people with reduced mobility. Because of that I can't run the installer of Windows 7 DVD.

  Please provide any help & suggestions.

  Thank you.

  Kind regards

  Eugene

  I managed to pass in Legacy mode as follows: http://www.eightforums.com/tutorials/13326-downgrade-windows-8-windows-7-a.html

  Reset the BIOS helped: https://www.youtube.com/watch?v=6KUyZIJ0xOc

  Can close the topic now.

  Thank you.

• Reference Dell will not load xp. Info Tech 0x000000c2 (0 x 00000043, 0xDFB25000, 0 x 00000000, 0 x 00000000) tells me to disable the BIOS memory options

  Info Tech 0x000000c2 (0 x 00000043, 0xDFB25000, 0 x 00000000, 0 x 00000000) system search floppy witch, I did not. Cannot start in safe mode that is blue screen tells me to disable the BIOS memory options, but finding where to.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the full and exact error message on blue screen?

  In response to the questions above could help us help you better.

  If the system restarts after blue screen then use disable automatic restart on system failure option to stop automatic reboot.

  Here's how:

  1. turn on your computer and keep pressing the F8 key before Windows starts.
  2. now in the Advanced Boot Options, select disable automatic system failure reboot

• I signed up for the 10 free stock images, and when I try to download them, save them to the desktop isn't an option.  What should I do?  I need to get rid of the tattoo.

  I signed up for the 10 free stock images, and when I try to download them, save them to the desktop isn't an option.  What should I do?  I need to get rid of the tattoo.

  Follow the n steps these screenshots: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

• HP Pavilion Elite m9060n or m9060la Desktop PC Bios and Firmware update

  This computer came with Windows Vista pre-installed

  Now I'm running Windows 7,
  What I downgrade to Vista to update the Bios and the Firmware of my hardware?

  Or the drivers Bios and Firmware Update (.exe files) are fully compatible with Windows 7?

  What suggest you the update in Windows Vista or Windows 7?

  NVIDIA GeForce 8500 GT video BIOS update
  IPIBL - LA motherboard BIOS update
  HL-DT-ST GGW - H10N BD Writer / update the Firmware of the HD DVD-ROM drive

  SAY THANK YOU WITH CONGRATULATIONS

  Macias
  -Please do not use TinyURL my firewall blocks them.
  Click on the star of CONGRATULATIONS on the left, if I helped you. Please mark as RESOLVED, if your question has been answered.

  Hello

  starwarsmex wrote:

  You are right!!!  If it is not broke, don't fix it! But to be honest, I did not play any Blue Ray DVD on my computer, so if a problem exists with the current firmware of the device I need to do? or just curiosity, I'm sorry I lose you, update/upgrade uses the drivers to recommend running the operating system preinstalled in this case Windows Vista?

  If problems exist, then try to upgrade with the appropriate firmware listed in the driver version Vista.

  Some of the improvements will work and others cannot.  It is unfortunate but it is like that between Vista and Windows 7.

  But... If everything works well, change the drivers and/or firmware and invite trouble.

  Best regards

  ERICO

• 8300 elite SFF: 8300 Elite won't USB flash drive boot

  Elite Mini PC 8300.  I made a bootable USB key but cannot get the Menu of boot or boot order configuration in the BIOS to see the player.  Exactly the same as in this other thread pending: USB not available in the Start Menu

  In 'Device Configuration' (BIOS) is listed, it does NOT appear in the Boot configuration order, even if I save changes and reboot.  I have disabled UEFI and Secure Boot, activated Legacy BIOS, I intend to install Windows 7 x 64.  When starting I press F9 or ESC to display the start menu and the USB key is not listed.  All USB ports are enabled.  Tried the ports front and rear (except USB 3.0 those W7 with no support from the other drivers for USB 3.0).  I tried he prepares with Microsoft USB DVD Tool and Rufus.

  The flash player has worked well with several other PCs.  for example I have HP Pro 4300 SFF and the flash player starts without a problem here it is configurable in BIOS and select from the Start Menu.

  First attempts on Elite 8300 was with BIOS v2.99.  But I also tried after update BIOS to v3.03 because release notes made remarks on improving support USB, but there was No change even problem.

  Take the battery CMOS press switch reset CMOS on the systemboard put the CMOS battery, restart the device to fix a date and time in the BIOS and check if this is useful.

• E9140f elite: decommissioning of BIOS

  Hello

  I upgraded the BIOS to version 5.07 to 5.08 in my HP Elite e9140f desktop computer. Since then, the fan runs at a very high speed, even when the system is not hot.  I installed the following command to upgrade the BIOS to 5.08:

  http://ftp.HP.com/pub/softlib/software11/COL34566/PV-85559-1/sp46427.exe

  Is it possible for me to downgrade the BIOS to v 5.07?

  Thank you!

  MK

  Hello MKG2,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you have updated the BIOS on your computer and now the fan runs all the time and you're looking to restore your BIOS to its previous version. Unfortunately, unless you have saved your discovery of the exact BIOS update BIOS you will be a challenge.

  As you have probably already guessed there are that only the updated BIOS update posted on the page drivers for you computer and therefore no chance of finding the right file must come from a third party. I would recommend before trying this way you examine and apply the changes in the HP Support document: Fan is Noisy and runs constantly (Windows 7), which can solve your problem without risking the bad BIOS update being installed.

  Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a great weekend!

• HP Elite 8200 CMT: Bios Update after the update of Windows 10

  Hello, I've updated my HP Elite 8200 CMT from windows 7 to windows 10.

  In the HP driver download page, there is no updated BIOS for windows 10.

  But I noticed that it is has updated BIOS for Windows 7.

  The question is, can I use it on Windows 10?

  And generally to load OS updates to the BIOS?

  Hello:

  You can remove the base flash BACK of the package of BIOS file folder, simply copy the contents of the file flash BACK on a USB stick formatted with the FAT file system.

  Plug in a USB flash drive, restart the PC, press the ESC key to get the options menu.

  Select F10 system configuration to access the BIOS.

  Select the file menu > control system ROM Flash.  Select the USB flash drive.

  The PC will see the files on the flash drive.  Follow the instructions to update the BIOS screen.

  In this way, it makes no difference what operating system you are running.

  A very important point... I read the last 2.29 installing BIOS causes problems with the W10.

  There is a post on the forum about who...

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/HP-Compaq-8200-elite-SFF-slow-reboot-time-in-legacy-BIOS/m-p/5654549#M12815

  I use v2.28 on my HP 8200 Elite CMT and have no problem at all on W10.

  I have read that post and decided to not update the BIOS to v2.29.

• HP 8100 Elite SFF: Firmware BIOS and I

  Hello!

  Wearing me trouvle find the latest version of the BIOS and MY firmware for my PC HP 8100 Elite SFF (AY032AV).

  On the software page and drivers for this machine there is no frimware BIOS file or currently, any ME language or OS I choose.

  I don't know that I downloaded another update of the BIOS from there in the past, it looks like some sort of error on the page.

  If there is any representative of HP, read this it would be great if you could fix this problem on the PC AY032AV.

  Greetings

  / Torbjörn

  I always use using HP Softpaq Download Manager (www.hp.com/go/sdm) to find and install the BIOS and h/w drivers on HP commercial systems. Try it. And update the BIOS itself - no other softpaqs only checked

• Elite HP 8300: recovery disk

  How to install all programs that I want my factory restore disk? I have all the disc that came with my HP elite 8300 Tower System. I just want to add some of the programs that I use. Is their a work around for this problem?

  Jim

  You cannot be selective about what you want to restore using the recovery discs.

  If you could provide a list of the programs you're looking for me to be able to find it elsewhere.

• HP ENVY 700-305no desktop PC: Bios update failure.

  Long story short (a little).

  I got a virus, is a virus really means, crypt all my files, prevents the opening of antivirus programs and redirects the downloads.

  virus survives 3 reset factory, 3 hard drive formats, and a reinstall of Windows.

  This leads me to believe that he himself got into the Bios of my computer.

  so I downloaded the latest bios for my system, in this case

  Update the BIOS HP consumer desktop PC (SSID family ROM 2AF3)

  through the Setup program on another computer, I installed the update to the bios of my USB,

  inserted in my main pc, held down the Windows and key B, while starting my computer.

  This led beeps and my computer Wrooms, 10 minutes later, nothing happened.

  I decided to start the installer directly from inside infected computer, but this resulted in a failure too.

  say that the downloaded bios is not compatible.

  What I'm asking is how I should go about the removal of the old bios (possibly) infected and reinstall it again.

  I'm not aware of a way to Flash the BIOS in Ubuntu, but it might be possible if there is a wine app in the version you have.  I have not experienced or read where someone else tried it either.  You could ask for more in the Ubuntu forums.  Don't know if it is possible to WIN PE 3.0 either.

• Pavilion dv61245dx Intel T6500, BIOS F44 No. virtualization Option. VTX CPU it will show?

  Pavilion dv61245dx with Intel Core 2 Duo T6500 processor

  Up dated to F44 BIOS and again it shows virtualization in the BIOS option.

  Upgrading the processor to tell a T9900 to 3.06 ghz, 6 m L2 cache which has a capacity of VTX, then display virtualization as an option in the BIOS?
  
  I don't want to lose mony on a new processor if this laptop cannot support ever 64-bit virtualization.

  Thank you.

  Your processor is not capable of hardware virtualization, but usually if the machine can make virtualization but for the processor, this option will just be grayed out. But the configuration manual says there is an option in the Setup (BIOS) to turn virtualization (some models only).

  Manual

  I'll go out on a limb and say that if you put a processor with virtualization, the option will appear in the BIOS. Manual maintenance, the motherboards all seem to be able to take one of the compatible processors so everything should be able to VT if the processor is capable.

  T9400 will VT if you want to minimize investment. $20 shipped on eBay:

  http://www.eBay.com/ITM/Intel-laptop-core-2-Duo-2-53GHz-Mobile-CPU-T9400-SLGE5-/301102545968?PT=CPUs&hash=item461b1c3c30

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Cannot enter BIOS or Option of Boot to display on my desktop Acer Aspire M3450

  For the last few days I tried to access in the BIOS or The Boot Options screen by pressing the keys with " DEL " for BIOS and ' F12 ' to The Boot Options screen. Same pressing down both keys on my keyboard and switch to normal startup with Windows 10 logo screen and then type password. I'm sure you know that this office is not supported for parameters of the UEFI. I tried with Settings\Update and Security-Advanced Options- then have 6 names on the double column , but I'm not sure that one to take to solve the problem. Here are the 6 names below:

  System restore

  System Image recovery

  Startup Repair

  Command prompt

  Startup parameters

  Go back to the previous version

  Everything what I wan tis to solve two things by pressing the ekys for BIOS and the Boot Options screen. That's all that I need it. Or I need to reinstall the entire disk operating system Microsoft Windows 10 Home Premium 64?   Either way, my computer's desktop Acer Aspire M3450 game.

  Thank you

  John

  It's a good thing I do not get out the my desktop's CMOS battery. Someone I know told me I 'Try to change the keyboard' Guess - it works now. The USB keyboard that I just bought does not work so I went back to the wireless keyboard that I used all the time. So now my problem is solved.

  Can I ask a question - why doesn't the USB keyboard support to accept that I press the key after the reboot for BIOS or Boot Display Options? Hope that someone here in this forum will answer for that.

  Thank you

  John

• How to connect my LaserJet 4500 to USB on new HP Pavilion Elite desktop 9517

  I have a new desktop Pavilion Elite M9517-c and you want to continue to use my hp laserJet 4500 color laser printer that has no USB connectivity.  Can you recommend a printer with a USB cable so that I can connect these two? Is this possible?  The printer is in great shape! Thanks for your response in advance

  My God, you're right it isn't the adapter, you need, sorry, here check this link

  http://www.emtcompany.com/catagories/USB-to-parallel-adapters.htm?gclid=CISz2-n2m5kCFRwDagodTU5aCw or

  This one

  http://www.cablewholesale.com/cgi-bin/googletrack.cgi?URL=/catalog/usbadaptors.htm&gclid=CKSK9qP3m5kCFSMSagodPAaICw