share a video from my computer to my laptop via the public folder, the error message: failed to connect

Similar Questions

• When I start my computer I have the error message: "failed to connect to A Windows Service.

  A few days ago, I received this message by turning on my laptop:

  "Could not connect to a Windows Service - Windows cannot connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. »

  However, when I go in the view of the event log, the "Event Viewer" window opens and I get this error message:

  "The event log Service is unavailable. Check that the service is running. »

  There are several other programs that will not open not because the message "failed to connect...". "appeared.

  I received help with back - light to the Windows event log. Everything was going well until I arrived at the end status section, instead of saying "started" it said "stopped". I've changed the status in the direction of "on the road" and then received the following message is displayed:

  "Windows could not start the multipoint Windows event log on the Local computer. Error 1747 - the Authentication Service is unknown. »

  What should I do now?

  Hello

  I suggest you follow under method that can help you solve your problem:

  Method 1: try to make the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2: Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

  When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

  You can try to download the 64-bit version.  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

• I need to connect 3 computers to one computer, but I get the error message: "no more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept."

  I just bought a copy of a license 3 reviews for QuickBooks Pro 2010. I can connect 2 computers on the home network very well. But when I try to connect computer (network) a 3rd to my machine to share the file, I get the error message. "No more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept." How can I connect my 3rd computer?

  I read the article in the following link, to change the value of the EnableConnectionRateLimiting, but I do not see this key.
  http://support.Microsoft.com/default.aspx/KB/969710

  I currently have Windows Vista Home Premium SP2, 64-bit edition.

  Hello

  Thanks for the response back.

  The command explained in article http://support.microsoft.com/kb/314882 if applies also for Vista, we have been able to run the command.

  Some possible causes for failure Remote Desktop connection are:
  a. authentication level is low/disabled.
  (b) the port of remote desktop can be blocked by a firewall.
  c. remote connections might not be enabled on the remote computer.
  d. the remote computer may be asleep or hibernating.
  e. e user account doesn't have a password.
  f. the remote computer may be too busy to accept more connections.

  To resolve all of the above causes, follow the steps listed under "I can't connect to the remote computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  I hope this helps.

  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• Move a layer from one document to another, I get the error message that the layer is empty

  When I copy a layer from one document to another in PS CC 2015.5 and then try to move the layer in the destination document, I get the error message that the layer is empty.  It is not empty and I checked several times and checked that the layer is not empty.  I have never had this problem before and wonder if something has changed in CC 2015.5.

  Thanks to all who responded.  I think the problem was that I was using the NEF files and that he had not yet renamed PSD files.  Copy the layer in the destination document, but when I tried to move the layer in the destination document, I received the error message.  Apparently, he was copying the layer but there not then recognize the NEF format.  Once I saved both documents to the PSD, then the program behaved normally.  I appreciate your all of the help.

  Sue

• Get the error message "failed to open the group policy on this computer object' while running gpedit.msc.

  Original title: I can't run gpedit.msc

  I'm configure GPO, but I get an error message that says: "cannot open the purpose of group policy on this computer. You do not have the appropriate rights. "and then on the details, he says:"unspecified error ".

  I use Win 7 SP1 Ultimate and I'm using an administrator account.

  Any ideas?

  Here is a screenshot:

  

  Hello

  Thanks for posting your question on the forum.

  Group Policy Editor (gpedit.msc) is only in the editions Windows 8 Pro and Enterprise in Windows 8.
  See the comparative table listed here on the blog of Windows 8. Please see the Note at the bottom of the article that Windows 8 Enterprise is not listed as you can get this version of Volume License.

  For more details you can see the thread mentioned below.

  where can I find GPEdit.msc?

  Hope that the information provided is useful and let us know if you have any concerns related to Windows.

  Kind regards

• I lost the ability to upload files to a Web site. I transfer files from my computer to a web site and I get an error message "the connection was reset" and the file will not download. I try to transfer the photos and I get the same message.

  I have download a scanned receipt on a Web site and I get the error message "the connection was reset". I downloaded these reception for two years and last week, I had to use a different browser to complete this operation. I log onto the site and make the report, I have to do, but I can no longer download on this site.

  Safe mode does not work. However, when I downloaded Firefox laptop everything worked. Any suggestions as to where I should go now. Thanks Fire Fox works on other sites I work with. The download has started working. I think the problem was the website.

• I got a virus and my computer starts is no longer the error message was < root windows > system32\hal.dll

  I downloaded a virus on my computer that wouldn't let my computer startup message wasn't system32\hal.dll Windows didn't start because the following file is missing or damaged.  I went into the recovery console and tried to repair the files what happened was now I can start only on my storage drive and it will stay running only for a few minutes and then the computer shuts down. At startup in the bios it is that one illustrious disc which is my small storage disk not the large drive box and not CD drive. A few days ago everything worked well today can't get to run long enough to fix it.

  Paul_652

  What a mess!

  Are you saying that the PC does not see the CD drive? Or that Windows could not see it?
  What is the brand and model of your PC? Are you able to get into the BIOS to see if the CD drive is listed? If so, you can then change order of device for the start-up of the PC then it stops on the CD instead of the hard drive.
  Links for bootable CD:
  https://help.Ubuntu.com/community/LiveCD
  http://www.hirensbootcd.org/download/
  Software to burn a bootable CD from a .iso file:
  http://www.ImgBurn.com/
  The drive being SATA Seagate, I wonder if you need to make a setting in the BIOS.
  I also wonder what will happen if you remove the Seagate and equip the Maxtor, then start with the disks to run RC. I still think that the Maxtor drive has an MBR on it!
  I think that your first course of action is to see if this CD player works or not (independent of WIndows).

• We try to update the software on a computer and continue to receive the error 1719:

  We try to update the software on a computer and continue to receive the Error Message 1719: "Installer cannot access the Windows service". We tried to repair Windows install several times by the cancellation of registration registration without success. Windows Installer continues to block the update of the program

  We tried to install a new version of Kaspersky and have met the above problems.

  Hi Jug,

  Thanks for posting the question on the Microsoft Community Forums. I understand that while trying to update the software, you get an error 1719: "could access the Windows service install.

  This question is can be caused due to:

  You install or remove a program that uses Microsoft Installer Service to install a program on your computer. The Windows Installer Service is not running. The Windows Installer registry settings may be damaged or wrong.

  I suggest you check out the link to the troubleshooting steps.

  Error "The Windows Installer could access the Service" when you install or update programs on Windows 7 or Windows Vista.

  http://support.Microsoft.com/kb/2642495

  WARNING:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

  How to back up and restore the registry in Windows.

  If still the problem persists after you perform the steps of troubleshooting from the link and if you have questions related to Windows, please do not hesitate to answer us, we will be happy to help you.

  Thank you.

• My computer won't recognize bluetooth headset! Error message 'Discoverablilty and connectivity settings were not saved' and 'Bluetooth Exchange folder is not found' by changing the properties of bluetooth

  Original title: my computer won't recognize bluetooth headset!

  When I checked "Allow bluetooth devices to find this computer" under the "Option" menu, I got the error message "Discoverablilty and connectivity settings were not saved. Another message error I got is "Bluetooth Exchange folder is not found".  Although I copied this file from my backup data files, the problem still exists.

  I used to use able to connect to my computer with the headset.

  Please advise me what I have to do.

  Hi Venturer016,

  Remember to make changes to the computer before this problem?

   

  Method 1: You can follow the steps mentioned in the link below

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot start the computer, the error message "Reboot and Select proper Boot device or Insert Boot Media in selected boot device and press a key any."

  Original title: can't access my BIOS, but blocked on select boot device

  I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.

  Hi Ryan,

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?

  Method 1:

  You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.

  http://forums.Toshiba.com/T5/Windows-7-knowledge-base/how-to-enter-the-system-BIOS-on-Windows-7-computers/Ta-p/275629

  Method 2:

  If the problem persists, I suggest you to return the item and check if it helps.

  What can I do if my laptop Windows 7 or Windows Vista does not start?
  http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717

  If the problem persists, I suggest you to contact the Toshiba Support for assistance.

  http://support.Toshiba.com/support/home

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Streaming video from my computer to my Htc Hd2

  How to stream videos from my computer on my Htc Hd2 phone?

  The following format must be in Wmv, Mp4, Asf, 3Gp, 3 g 2 or M4v

  If it is not in these formats it will not play with windows media player on my phone

  Hi Bahumat,

  To stream the video from your computer to your mobile HTC, you must convert the video files to the format supported in Media Player for HTC mobile. Conversion of the video to the required format, you need a third-party software for the conversion. You can use your favorite search engine to download the video converter program and then try to convert the video and try to listen on your mobile phone.

  Note: Third, to 3 third party sites or information drivers created by 3rd party companies that have been discussed are produced by vendors independent of Microsoft; and we give no warranty implied or otherwise, regarding these products so use at your own risk.

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Issue to receive the error message "the system has recovered from a serious error" while working on the computer and the computer restarts automatically.

  Original title: The system has recovered from a serious error-

  The system has recovered from a serious error-

  When you work in windows xp home edition, whenever this programe message and stop running and some auto restart machine.

  What is the solution for this?

  Hi Sandeep,

  Thanks for posting your question in the Microsoft Community forum.
  It seems that you have a problem with the error message "the system has recovered from a serious error," while working on the computer, and the computer restarts automatically.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  Method 1: I suggest following the steps listed in the article and check if it works.
  Error message: the system has recovered from a serious problem
  http://support.Microsoft.com/kb/316424

  Method 2:
  I suggest you analyze your computer by using the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.
  You can see the article for more information:

  A "System has recovered from a serious error" message after every restart.

  http://support.Microsoft.com/kb/317277

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• I received calls from someone in India who said that they are Windows services centre telling me that they have received the error message saying that my computer is corrupted

  Original title: my computer is corrupt and needs fixing!

  I received calls from a person in India who said that they are Windows services centre telling me that they have received the error message saying that my computer is damaged, and they want to help me.  But I have not received any error message on my screen.  When I asked them how they got my number they said it's from the database of Windows. The number they gave me is 02921252715 and when I called the number of the person on the other end told me that they are a company called Windows e-solution, independent company and is not attached to Microsoft Windows.  What should I do?  Are these authentic calls and approved by Microsoft Windows?

  Hello

  Its a SCAM!

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.