Shared C240M3 LOM Ext

Similar Questions

• C220-M3 wire management

  We had to remove a C220-M3 of UCS FI, upgrade the MMIC to V1.3.5.d (to resolve the issue, install W2012 and W2012 R2 on an embedded MegaRaid controller)

  Subsequently, we changed the setting back to Shared-LOM-Ext (unfortunately we do not do a factory reset) BIOS

  After C220-M3 is again in UCSM and SP is associated with we get

  

  It seems that there is a problem with cloth b; If I move fabric vNIC b to a, the error has disappeared?

  Walter,

  If the connection are in the path connection and the connection status and the limited number of NICs for you show here there is something unusual happens.  You can try a decom/recom and see if that helps.  If this isn't the case, I recommend that you open a case with TAC so that we can collect the right information and help solve you the problem.

  Steve McQuerry

  UCS - Technical Marketing

• Trigger headless on notification to the Hub

  I want to know it's possible when headless request give notification of Hub, then all by showing that the notification as instant notification on site bar, how can I add feature that's so I click this instant notification it trigger pre declare the function.

  You cannot use an object of the call, you must use the InvokeRequest associated with the Notification.

  For example, copy the following code to open a file in app (sys.perimeterbrowser) file manager:

  BB: platform::Notification::clearEffectsForAll();
  Notification notify;
  application of BB::System:InvokeRequest;
  request.setTarget ("sys.perimeterbrowser");
  request.setAction ("bb.action.OPEN");
  request.setUri("file:///accounts/1000/shared/documents/myFile.ext");
  notify.setInvokeRequest (request);
  notify.setTitle ("Sample");
  notify.setBody ("body");
  Notify.Notify ();

  Note that the InvokeRequest is triggered only if the user clicks on the Notification when it is at the top of the screen like a toast. Otherwise, the user will need to open the notification in the hub and click the Open button at the bottom of the page of detail of Notification to trigger the InvokeRequest.

• External Seagate hard drive sharing trouble!

  I have an Ext. HD Seagate that I used with my PC with Windows Vista. Now that I switched to Mac, I'm unable to add files to the HD. When I right click and go to get information , I look at sharing & permissions and it says "you can only read. Anyone know how to open the Ext HD to read and write?

  Thanks advance!

  Without doubt, the drive is formatted in NTFS. If so, you should not use 3rd party software to access the drive or you will have to reformat the drive Mac OS extended (journaled). If you still want to use with Windows software, you will need to format in FAT or EXFAT. Copy the files to a different location before reformatting.

  NTFS - Format file - formats allow Macs to write to Paragon NTFS

  NTFS - File Formats - will allow Mac to write to-Tuxera

• IX4 - 300 d - cannot copy files between actions or the ext disk. USB

  Hi forum!

  I can't work for the life of me how to move files between the shares on the NAS. I can access my computer fine actions. I have a USB HARD drive connected to the front USB port and I want to copy some files from the HARD drive to a shared folder on the NAS, but when I'm in the content browser that I have no option to copy, and there is no functionality of drag - move. That I going nuts or something blatantly obvious lack?

  I want to copy data from USB directly as it is a few TB of data and copying on the LAN will take ages. It's going to be a regular thing, but I can't really put in place a copy job, because it is not the same type of data or file locations every time.

  Help, please!

  Thank you!

  Matt

  Hello MattDobson,

  You will need to map the actions:
  https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=how+to+map+a+network+sh...

  And move the data in this way, the Ext HDD will appear as its own share, but can be mapped as others.

  The content in the UI Viewer is not designed to move data.

  You can find documentation and downloads for the ix4 - 300 d here:
  https://Lenovo-na-en.custhelp.com/app/cust_alp/p/1189, 1193/session/L3RpbWUvMTQ0MDUyNTY3OS9zaWQvZWNDc...

  You can download the Storage Manager Lenovo via the link above, and which should help you to map actions.

• WRT610N & ext HD via USB (for the use of NAS)-can not move files to the external

  Linksys WRT610N v1
  -Firmware Version: 1.00.03 B15 (updated about a month ago)

  Western Digital My Book Mirror Edition 2 TB model # WDH2U20000
  - http://www.wdc.com/en/products/products.asp?driveid=466
  -NTFS,
  -mapped with my M: drive, and
  -named WD 2 TB-MIRROR.

  HP laptop (Windows 7 Professional 32-bit)
  -normally wireless, but currently hard connected via Cat-5 Ethernet cable.
  -That is the only computer at home and I'm (of course) the admin ".»

  While I'm the 'computer' guy for family and friends, I turned in the novice because of this; I'm lost and feel beaten.  Please be as complete as possible with instructions/answers.  Guess I'm a noob.

  My plan is to use the WD external hard drive as a backup of my files and run the music/movies, etc out of it to my TV installation / audio salon through my Playstation3 or whatever.  My problem is simply to obtain the files copied to the external hard drive.  And being that this is a fairly simple HDD, I think that the issue could be with the USB (SIN) / configuration of the connection through the router.  That, or maybe there are authorization implementation issues.  I know that the HD has a setting for the mode 'sleep' - I did get to a point where I can adjust.  Anyway, I was able to get a record created but nothing to copy.  Then, I was (finally) able to delete the folder, etc..  I don't know if I'm missing some configuration/installation or if the scenario is just climbing.

  And for those of you who know software MioNet and/or WD Anywhere Backup provided with outside, I have installed the software on my computer laptop but has not been signed by all accounts and do not use them.  So I think that they are not a factor.  Just thought I would include this info just in case it is important.

  Here are several screenshots which can help you diagnose my problem:

  • Ext HD not found by Windows Explorer, even if you can 'see' it. He slept?
  • Ext HD "Properties".
  • Ext HD "Properties - Security.
  • Management Administration WRT610N
  • The shared folder of WRT610N
  • The WRT610N storage administration
  • Disk storage WRT610N

  On the router configuration page, rather than share the public folder, share the whole score. Once done, on the computer, map the drive and check.

• How to handle shared extension webworks reference library

  My webworks extension uses a shared reference library.  The library module is deployed with an agent java application on the device already. In case of native java application, other applications that use this library shared do not overload the library during deployment.

  In the case of webworks app, seems that I have to put the library jar file in the root of the webworks app to be able to compile the web extension to bbwp command. However, after I deployed the cod file, I get prompt the class in the library has been defined in several.

  Is there a way to not wrap the library with the webworks app file?

  June

  I got response source RIM on another thread of e-mail and it workd form me. I post the answer here to share.

  The recommended method for distributing webworks extension is to copy the source in the ext of the webworks SDK folder. This will allow you to use a single code base across multiple use of a same extension. How to distinguish a pot for the inclusion of a compile-time only jar is with an additional label in the library.xml for dependencies.

  sample: bbm webwork extension:

  blackberry.bbm.platform.BBMPlatformExtension

  June

• ICX session sharing between EBS and ADF. Navigate from EBS page by page of ADF custom application. but every time I get the session as a GUEST, even if I give valid credentils to enter into EBS.

  Hello

  I am integrating EBS and ADF through sharing of session ICX. Navigate from EBS page by page of ADF custom application. but whenever I get session as GUEST (VALID_GUEST), even if I give credentials valid at the EBS system. I should get a valid session that I have connected with a valid user. As it it a VALID_GUEST that the status of cookie icx, back (he got newspapers/debug) and I am.  Comparing with status cookie VALID icx, so every time system opens the Apps login page.  I used fndext.jar to do this. Please help me on this. I'm not sure it's a problem with DB/EBS EBS system, or the code of the adf. My code spruce is given below.

  import java.io.IOException;

  import java.sql.Connection;

  import java.sql.SQLException;

  Import javax.faces.application.FacesMessage;

  Import javax.faces.context.FacesContext;

  to import javax.servlet.http.HttpServletRequest;

  to import javax.servlet.http.HttpServletResponse;

  Import oracle.adf.controller.v2.lifecycle.Lifecycle;

  Import oracle.adf.controller.v2.lifecycle.PagePhaseEvent;

  Import oracle.adf.controller.v2.lifecycle.PagePhaseListener;

  Import oracle.apps.fnd.ext.common.AppsRequestWrapper;

  Import oracle.apps.fnd.ext.common.CookieStatus;

  Import oracle.apps.fnd.ext.common.EBiz;

  Import oracle.apps.fnd.ext.common.Session;

  / public class MyCustomPhaseListner implements PagePhaseListener {}

  public MyCustomPhaseListner() {}

  Super();

  }

  AppsRequestWrapper wrappedRequest = null;

  HttpServletRequest request = null;

  HttpServletResponse response = null;

  String currentUser store = null;

  String currentUserId = null;

  {} public void afterPhase (PagePhaseEvent pagePhaseEvent)

  If (pagePhaseEvent.getPhaseId () == Lifecycle.PREPARE_RENDER_ID) {}

  System.out.println ("in phase");

  If (wrappedRequest! = null & &)

  wrappedRequest.getConnection ()! = null) {}

  try {}

  If (! wrappedRequest.getConnection () .isClosed ())

  wrappedRequest.getConnection (m:System.NET.Sockets.Socket.close ());

  } catch (SQLException e) {}

  }

  }

  }

  }

  {} public void beforePhase (PagePhaseEvent pagePhaseEvent)

  If (pagePhaseEvent.getPhaseId () == Lifecycle.INIT_CONTEXT_ID) {}

  Channel agent = null;

  System.out.println ("forward Phase");

  FacesContext fctx = FacesContext.getCurrentInstance ();

  request =

  (HttpServletRequest) fctx.getExternalContext () .getRequest ();

  answer =

  (HttpServletResponse) fctx.getExternalContext () m:System.NET.FtpWebRequest.GetResponse ();

  CookieStatus icxCookieStatus = null;

  try {}

  Connection EBSconn = ConnectionProvider.getConnection ();

  EBiz instance = EBizUtil.getEBizInstance ();

  wrappedRequest =

  new AppsRequestWrapper (request, response, EBSconn,

  (instance);

  A session = wrappedRequest.getAppsSession (true);

  tried with "a session = wrappedRequest.getAppsSession ();" / / do not return not of any session

  icxCookieStatus =

  session.getCurrentState () .getIcxCookieStatus ();

  Agent = wrappedRequest.getEbizInstance () .getAppsServletAgent ();

  If (! icxCookieStatus.equals (CookieStatus.VALID)) {}

  response.sendRedirect (agent + "AppsLocalLogin.jsp");

  return;

  }

  currentUser = session.getUserName ();

  currentUserId = session.getUserId ();

  } catch (Exception ob) {}

  ob.printStackTrace ();

  }

  FacesMessage message =

  new FacesMessage ("Session is:" + icxCookieStatus + "" +)

  currentUser + "" + currentUserId);

  fctx.addMessage (null, message);

  }

  }

  }

  Have you checked

  https://blogs.Oracle.com/jruiz/entry/adf_and_oracle_e_business

  https://blogs.Oracle.com/jruiz/entry/adf_and_oracle_e_business2

  http://www.Oracle.com/technetwork/tutorials/EBS-SDK-ADF-1887167.PDF

  https://www.YouTube.com/watch?v=9wGv7yxRgVU

  Timo

• External client access VMware Workstation shared 11 VM?

  Hello world

  I have a small problem that we have a VMware workstation installed on my PC to 10 windows and I would allow a few colleagues access to the virtual machines shared on this topic.

  I enabled the shared virtual machine settings, and I can confirm that I can connect from another post on my local network.

  However, I can't seem to connect to the shared virtual machines from outside my network. I DynDNS and handed over port 443 to the Windows box with installed Workstation (192.168.2.10).

  I even tried changing ports internally using the shared virtual machine parameters.

  Also tried, is to have a different external port one internally (7000 ext sent to 443)

  Adding to this I tried the IP of my router (to rule out DDNS) - in regard to this, I can connect directly to the virtual machine via DDNS passed to image.

  The Windows Firewall is disabled on the host of the workstation.

  Then... Please this is; Is this really possible? Before that I continue to invest in any time in it.

  And... I tried to get that I promise you!

  Kudos to everyone for any help

  Hi SpoonRacer,

  Welcome to the community of workstation! Of course, this scenario is possible. Sharing of the VM has no difference with other standard network on the IP layer services.

  I think that General measures to be implemented are:

  1. Get the accessible external IP address of your private network
  2. Map the TCP 443 port to the external IP address on port TCP 443 of the Windows box workstation running by the DNAT
  3. Allow inbound network traffic on port TCP 443 on Windows machine running Workstation
  4. (Optional) Configure DynDNS point your domain name to the external IP address of your private network

  For example:

  1. Get the external IP address: 216.58.216.164
  2. Map 216.58.216.164:443 to 192.168.2.10:443 by the DNAT
  3. Open the TCP 443 port on host 192.168.2.10 (now you should be able to access your shared virtual machines using 216.58.216.164 for outside networks)
  4. (Optional) Configure ws.spoonracerdomain.org resolves to 216.58.216.164 (now, you should be able to access your shared virtual machines using ws.spoonracerdomain.org for outside networks)

  However, these steps are not very easy to implement due to some possible limitations of your private network:

  • If your private network is at home, the external IP address and it is very accessible from outside of the network depends on your ISP (internet service provider). I know, some ISP does not allow the public IP address used by individual users accessible via the public network. Some ISPS even not you assigned a public IP, other users and you share a single public IP, in this case, you would not be able to apply step 2.
  • If your private network is to your business, and you're not network administrator for your company, you would not be able to apply step 2.

  Anyway, you can try to open a Web site on the Windows machine running Workstation to the outside network. If successful, then the service share of VM can be done the same way (just change the port 80 of the site to 443 folder).

  Kind regards

  Shawn

• I can't illustrator to download on my drive Ext. hard, Photoshop and inDesign work perfectly and I have 444 GB free space? any thoughts on what may be wrong or suggestions? Thank you

  I can't illustrator to download on my drive Ext. hard, Photoshop and inDesign work perfectly and I have 444 GB free space? any thoughts on what may be wrong or suggestions? Thank you

  Although Adobe indicates that you install the application on the main drive, it is possible to change the destination of the installation of creative cloud app preferences. Please note that there will always be shared resources stored on your primary drive.  In addition, temporary files will be created on your main drive during the installation process. The Adobe Creative Cloud desktop application will remain on the default drive. If you have already installed the application, you must uninstall, change the destination drive, reboot the machine and then install the application.

  (Please see the FAQ section of this link at the bottom of the page: download and install Adobe Creative Cloud applications)

• Unable to start Shared Services

  Hi all

  I've updated an existing version of EMP Installationsur 11.1.2.1 to 11.1.2.3 using the release of maintenance.

  I was able to improve the environment, the greater part of the dowry of requests (essbase, space to work, planning, aps, smartview), but I couldn't the SSP to work. I could not access services shared workspace. I have the following error when I try to start the services of the Foundation. the services start but shared services does not work. Can someone tell me please to the right direction on how I should fix this error

  Marbles:

  8 October 2013 12:48:35 PM CDT > < HTTP > < Server > < FoundationServices2 > < error > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000K6PBjoQ9Tc7InIy0VJ1IL4LQ000002 > < 1381254515279 > < BEA-101216 > < Servlet: 'WorkflowEngine' failed by preloading at startup in a Web application: "interoperability."

  javax.servlet.ServletException: error of initialization of the DSF ORA-00904: "PROCESSNAME": invalid identifier

  at com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:70)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubS

  # < 8 October 2013 12:48:35 PM CDT > < Info > < hats > < FDM10 > < FoundationServices2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000K6PBjoQ9Tc7InIy0VJ1IL4LQ000002 > < 1381254515295 > < BEA-149059 > < interop SSP request Module [Version = 11.1.2.0] changes from STATE_ADMIN to STATE_PREPARED on the FoundationServices2 server. >

  # < 8 October 2013 12:48:35 PM CDT > < Info > < hats > < FDM10 > < FoundationServices2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000K6PBjoQ9Tc7InIy0VJ1IL4LQ000002 > < 1381254515342 > < BEA-149060 > < interop application SHARED services [Version = 11.1.2.0] Module successfully go from STATE_ADMIN to STATE_PREPARED on server FoundationServices2. >

  # < 8 October 2013 12:48:35 PM CDT > < error > < hats > < FDM10 > < FoundationServices2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000K6PBjoQ9Tc7InIy0VJ1IL4LQ000002 > < 1381254515357 > < BEA-149231 > < cannot create the activation to true for the application state "SHARED services [Version = 11.1.2.0]'."

  weblogic.application.ModuleException: [HTTP:101216] Servlet: 'WorkflowEngine' failed by preloading at startup in a Web application: "interoperability."

  javax.servlet.ServletException: error of initialization of the DSF ORA-00904: "PROCESSNAME": invalid identifier

  at com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:70)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  Validation report

  Foundation of Hyperion

  Validation of audit FAILED that the audit has been initialized

  Error: http://bas10.mnapps.state.mn.us:19000/interoperability/status? component = AUDIT

  Recommended action: check the logs of validation for exception details.

  0 seconds

  Not a NOT THESE validate that CES has been initialized

  Error: http://bas10.mnapps.state.mn.us:19000/interoperability/status? component = THESE

  Recommended action: check the logs of validation for exception details.

  0 seconds

  CFG PAST: Configuration validating this configuration tasks is completed

  0 seconds

  Is NOT CSS validation CSS has already been initialized

  Error: http://bas10.mnapps.state.mn.us:19000/interoperability/status? component = CSS

  Recommended action: check the logs of validation for exception details.

  0 seconds

  PASSED DB: Database Connectivity Checking connection to database jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=dm01client01-vip.mnapps.state.mn.us)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=dm01client02-vip.mnapps.state.mn.us)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=dm01client03-vip.mnapps.state.mn.us)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=dm01client04-vip.mnapps.state.mn.us)(PORT=1521))(LOAD_BALANCE=yes)(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BPAS1APX.mnapps.state.mn.us)(FAILOVER_MODE=(TYPE=SELECT)(METHOD=BASIC)(RETRIES=180)(DELAY=5)))

  0 seconds

  PAST EXT: Provider Configuration external native authentication control external authentication directory

  7 seconds

  HTTP FAILED: HTTP check availability of HTTP context http://bas10.mnapps.State.mn.US:19000 / interop

  Error: Bad response codes with the methods GET and POST: 404 and 404

  Recommended action: Verify that the application is started

  0 seconds

  HTTP FAILED: HTTP check availability of HTTP context http://bas10.mnapps.State.MN.us:19000/Hyperion-BPMA-server/applications.asmx

  Error: Bad response codes with the GET and POST methods both: 503 and 503

  Recommended action: Verify that the application is started

  0 seconds

  HTTP FAILED: HTTP check availability of HTTP context http://bas10.mnapps.state.mn.us:19000 / WebAnalysis

  Error: Bad response codes with the methods GET and POST: 404 and 404

  Recommended action: Verify that the application is started

  Sounds like the upgrade to the relational tables of SSP was not implemented when the database has been set up again.

  If you look in the repository and the table CES_PROCESS_DEF you have a column called PROCESSNAME? I think that in 11.1.2.1 table had 4 columns and now have 9

  Field	Type	Null values?
  ID_PROCESSUS	VARCHAR2 (100)	NO.
  PARENT	VARCHAR2 (100)	Yes
  THE TYPE OF THE OBJECT	NUMBER	NO.
  OBJVALUE	BLOB OBJECT	Yes
  APPLICATIONNAME	VARCHAR2 (100)	Yes
  PROCESSNAME	VARCHAR2 (100)	Yes
  REVIEW	VARCHAR2 (100)	Yes
  AUTHORNAME	VARCHAR2 (100)	Yes
  DESCRIPTION	VARCHAR2 (100)	Yes

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Photos shared on iOS devices use data?

  I have created a number of shared albums in the Photos on my Mac and iOS devices.

  When other people visit then shared albums, what data are used to access?

  I invited a person to see a shared album which had mobile data off on their iOS device and no wifi. However, they were able to access a shared album which surprised me because I assume they would have need of mobile data or wifi.

  Shared albums are stored locally on the iOS devices. Photos downloads smaller and optimized versions pictures of an iPhone. iCloud, sharing photos - Apple Support

  Once shared, pictures taken with your standard devices, iOS devices or cameras have up to 2048 pixels on the long edge. Panoramic photos can be up to 5400 pixels wide.

• sharing between two apple ID

  How can I share contacts and calendars between two Apple ID?  Also my wife and share our music iTunes between our IDs?

  See the following topics:

  http://www.Apple.com/icloud/family-sharing/

  Family shares - Apple Support

  Implement the family sharing - Apple Support

• Are automatically shared Contacts with the members of the family of a device for all devices of the family? One device uses IOS9 and others are using IOS10.

  Members of the family can share Contacts?  A member of the family is on IOS9 and others are on IOS10. Our calendars are sharing but not our contacts?

  No, sharing of family does not share Contacts. He shares:

  Purchases

  (If you are registered) Apple's music

  Family Photo album

  Family calendar

  Location sharing

  Find my iPhone

  Apple - iCloud - family sharing

  See you soon,.

  GB

• How can I protect some files of the icloud sharing in the sierra?

  How can I protect certain files from the desktop to icloud and sharing documents in the sierra?  Some of my data is private and I don't want it in the cloud.

  Do not put them in the Documents folder or on the desktop.