Shared drive file Windows Server 2012 r2 access VERY slow

Every time I open a file that is located in a shared folder on a drive with r2 Windows Server 2012 (videos and PDF with graphics, in particular), says file takes forever to load, videos often stutter, etc.. This affects all computers connected to the field with access to these shared folders/drive. Is there any solution for this? I couldn't find one so far.

This issue is beyond the scope of this site and must be placed on Technet or MSDN

http://social.technet.Microsoft.com/forums/en-us/home

http://social.msdn.Microsoft.com/forums/en-us/home

Tags: Windows

Similar Questions

  • HP Envy (700-420nx): HP Envy 700-420nx Ethernet (network driver) for Windows Server 2012

    I recently converted my desktop (HP Envy 700-420nx) in a server machine PC, running Windows Server 2012. But unfortunately the network stopped working. Then I installed the network (Realtalk) for windows 8.1 driver. But the problems still exist as it is. Says "No correct IP configuration" after an auto repair, "United Nations identified network" on the list of the networks.

    This is why I would like to download the specific driver for Windows server 2012 or any other possible solution to this matter is appreciated.

    Thank you

    Hello:

    See if the driver directly from Realtek works... DL and install the 3rd pilot (4th point) on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  • PERC H700 driver during Windows Server 2012 r2 - disk Raid not recognized not

    Hello

    I try to install a r2 Windows Server 2012 to a Poweredge R710 with a Raid Perc H700. 2 HDD in Raid 1, but the HARD drive is not rcognized Italian Installation even if I try to use the 2008 r2 for the Perc Raid driver. They are listed, but if I select one disk HARD are not visible. What should do?

    Best regards...

    Grolle,

    Leave in the Raid Controller, what is the status of the table? In addition, was the raid 1 initialized after being created? If this isn't the case, then, who will have to be done before you try to install.

    If you download this and start on the lifecycle controller (F10) and then select deploy BONES, load these files there and proceed with the installation of the OS.

    http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=M5VGR&FILEID=3325059394&osCode=MWS80&ProductCode=PowerEdge-R710&LanguageCode=en&CategoryID=DD

    I would like to know how will install it.

  • PC running XP cannot access shared Windows Server 2012 Essentials

    Hello, I'm having a problem with access to files shared on my Windows Server 2012 Essentials on my Dell Inspiron 1100 running XP Pro SP3 I changed all my computers in the workgroup of names to match NetBios servers and all my other computers have access to stocks with the exception of the Inspiron 1100 trying to access in the sharing I am told that I do not have access, I am not offered a prompt to enter a user name and password I am simply denied access. Does anyone know how to get around this problem or fix the issue fact XP and issue with Server 2012 or vice versa. I can access the server to office assistance remotely, but not shared folders which seems strange to me. I've already posted the same question on the TechNet site too since it's a server issue but I find that you can easily post there and receive no help, so that never but I find that almost every subject I posted here, someone has at least made an effort to help with your problem.

    In fact, I created a user account on the server and the XP client gave them both the same user name and password and now I have full access to server shares. I have often continue to try while you wait for answers and find my own solution.

  • shared files Windows server 2008 when I try to access the logged error shows try 704 form again later.

    shared files Windows server 2008 when I try to access the logged error shows try 704 form again later. While it uses this file from the last three months

    Hi Maury,

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum. Please post your question in the TechNet Windows Server 2008 R2 Networking - read only forum.

  • Virtual Windows Server 2012 causes to no file sharing function

    I followed several tutorials on Youtube as well as teaching online and so far file sharing does not work on Windows Server 2012 which is be virtualized by VMWare ESXi 5.I don't think he would, but I want to just double check everything. Here's the message I kept getting:

    Share-AccessDenied.jpg

    Found this KB KB VMware: shared folder in a virtual machine in Windows 2012 is not accessible on the network hope it solves your problem

  • Windows Server 2012 R2 Private File Sharing

    Hello

    I have a Windows Server 2012 R2 with experience Essentials that I use for my home.  I would like to configure the server so that my family and I can access the contents of all the job server and connect to home via Office at distance as well. How would I do that? All my computers at home running the version of windows 7 and 8 lay, so I can't use a domain.  I understand that I may access to any where, but I understand that in the installation of the role of the experience of Essentials, you must configure a domain.
    I appreciate the help and can provide all the necessary information.

    Hey Connor,

    The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer&filter=AllTypes&sort=lastpostdesc

  • Windows server 2012 file server slow speed

    Dear all,

    I use Windows server 2012 as a server file only with 64 GB RAM and 16-core intel Xeon and size of shared file is only 800 GB. problem is that after a few rate of file transfer from client to server got time slowing down as below.

    copy data between client to server transfer rate are ok (60 MB/s)

    copy data between transfer of client server are low (200 Kb/s)

    whenever I rebooted the file server, it worked super fast, but after a few hours I get this question with transfer rate.

    can someone help me with this regard.

    Noor Uz Zaman

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Can I use ASM / ME to windows server 2012 file server failover clustering?

    Hi all

    Can I use ASM / ME to windows server 2012 file server failover clustering?

    We can use it with exchange, sql, sharepoint,..., but I can't find any document for file server.

    Thank you.

    HIT / working ME with CSV W2K12/R2, W2K8 CSV volumes cannot bear not to cancel the MAPPING is the main difference.  But HITTING / will allow ME to create the active copies and replicas of volumes CSV

    Yes the cluster file shares are supported with SUCCESS / me.    If you think about it, SQL, Exchange are indeed a "sharing".   Because it is an NTFS volume with services that run against her.  SQL, Exchange or fileshare services.

  • Graphic driver Intel HD in Windows Server 2012

    Hey guys, I downloaded Windows Server 2012 through Dreamspark yesterday and installed on my desktop. But the system cannot identify the Intel HD graphics 2000.When I try to install the official driver for Windows 8 to Intel. An error window came out and said that "the system does not reach the installation requirements.

    Could someone help on this problem, please? I expect Windows Server 2012 for a long time and this problem has made things stuck. I can't use my HD display at a very low resolution.

    Thank you.

    Uninsured, I don't know exactly what a thing make you laugh. No matter you believe it or not, it's here: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21180&lang=eng

    As I already said, what I find funny is the fact that some people like to say things like: "they have been waiting for Windows Server 2012 for a long time..." As it was the most important thing in the world, and as they wait for so long - it is a situation of fire for volunteers drill, they ask to.  It is the exaggeration of the issue that I find humorous.  Always, always will exist.  People think if they fall a few names, to mention a few things that make this situation 'important' for them - others will be more willing to help.  Often, this is the case - the human nature.

    Back to the part that mattered...

    "This software package will install the driver for the Intel® WHQL Intel HD Graphics 3000/2000 and® HD Graphics 4000/2500 for Windows 8 * Release Preview."

    Intel has drivers on Windows Server 2012 for other devices, but obviously not for the one you look at.  Just because they have one for Windows 8 does not mean it will work in 2012 Windows.

    Your problem is with Intel and what drivers they offer, not Microsoft (as I said already.)

    The drivers that you linked are for the Preview Release (foot) of Windows 8.

    If I were you, I would try all the drivers Windows Server 2008/2008 R2 for the product in question.  Although my quick research shows that none occurred for this chipset (probably because Windows Server is not a market that intel pushes for this chipset)-Yes, then I suggest to try the driver for Windows 7.  Using a Windows driver 8 beta is obviously NOT to give you the desired results.

    Try the Forums from Intel.

  • Remote access Windows Server 2012 through internet with desktop connection

    Summer messing about with it for days and don't get no love.

    Try to connect with Windows 7 Ultimate edition to Windows Server 2012 Data Center version from outside my home network, Starbucks or McDonald's or my server at home.

    Tried all these steps found in this promising and useful article:

    http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

    1. Allow connections to the computer you want to access remotely. DONE - ADDED to THE SERVER AND NON-ADMIN ACCOUNT to RDP GROUP of ROLES, using network level authentication. Connection of Win 7, so this method of authentication should not be a problem, I assume.
    2. Make sure that remote desktop is able to communicate through your firewall. DONE - FOR BOTH PUBLIC AND PRIVATE RULE.

    3. Find the IP address of the computer on your home network you want to connect. MADE - by using the ipconfig/all command

    4. Open your router configuration screen and worms forward port 3389 for TCP IP address of the destination computer. DONE - NOT TCP/UDP but TCP only, internal and external port goes. Note: The use of a booster signal wifi at the end of the House, it is a problem that requires additional configuration? I don't think he has an ip address or acts as a router. But in desperation I can try unplugging then again head the local Starbucks to try to connect.

    5. Find the IP address of the router so that the remote desktop can be found on the Internet. DONE - using "what is my ip", pretty easy.

    6. Open Remote Desktop connection, and connect. ACTUALLY, I think THAT, IN ENTERING [ip router]: 3389.

    But the result of the message is always the typical:

    (1) remote access to the server is not enabled.

    > But this is not true, that I am capable of the DRC at home on the server machine.

    (2) computer remote is not off.

    > But this is not true, as I just left home 30 minutes and sometimes it's rarely, only restarted.

    (3) the remote computer is not available on the network.

    > Don't know what that means. Of course the remote computer is not on the network, I am on right now. It's on my home network. But I can ping my router ip via cmd, then coming to the outside can be done; through my router, I should be able to access inside my home network port forwarding w. But no love.

    So... what to do, what to do...

    The wifi booster is a problem?

    Connects to the Data Center edition a problem?

    What happens if I uncheck the option ' use authentication NLA, is that the passage of the security risk?

    Any ideas about the configuration I could be missing before giving up and go for VPN or TeamViewer. I would really like to see materialized during all the time that I put in trying to run the DRC.

    Thanks for any input.

    / Markus

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • How can I get Windows Server 2012 Essentials recognize my HARD drive when you turn an external HARD drive in a drive HARD internal storage?

    I recently had a pool of storage space using 3 external drives USB 3.0 in Windows Server 2012 Essentials.  I decided to take the readers out of the enclosure and connected directly to the internal SATA connectors on my motherboard.  When the server was launched upward, these 3 discs now display as disconnected in storage.

    When I do the command 'get-disc' physical in PowerShell, the drives appear as "drives physical 1,2 & 5" and are 2.72 to each. "."  But it also lists disks Seagate Expansion as well, with a status of "communication lost".  These are the same three disks that are now internal.

    Nothing has been deleted or erased, so all the data is still on each individual unit and assume that if I managed to put back them in the external enclosure, would immediately online.  I thought that everything simply moving them to a new HARD disk controller (internal SATA USB) would not cause the pool to drop the readers, they are always connected to the same server.

    Is there a way to get storage space to see and read the 3 internal drives to bring my pool/area back online without losing any data?

    Server experts are found in the forums below.  The forum you are now is for questions to the consumer of Windows, not Windows Server issues:

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  • Sharing the maximum number of folders in windows server 2012

    Hello

    What is the maximum number of shares that can be set in windows server 2012 (or windows server R2 2012)?
    Is there a limit to the number of shares?
    This default can be changed (increased)? If so, how?

    Thank you
    Limor

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • Thumbnail option does not work in Terminal Server in Windows Server 2012 and server session

    This might be a stupid question.

    We have two Windows server 2012 R2 - TS and DC. The clients are connecting to TS and access the shared network drives present in DC. I always unchecked 'show icons, never thumbnails' and 'Show thumbnails in System Properties' enabled on DC and the two TS.

    No always thumbnail option.

    You will need to click on each image. Users have many files containing multiple images. It's annoying to click and view each image.

    Note: NO GPO is configured to block it. Checked.

    I can't find any object GPO to allow this option to be :)

    More info. For customers, anywhere, whether network shares or all folders in TS session. It does not work. Also tried painting and Windows Photo Viewer.

    Here, any help will be very appreciated!

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Help error Robocopy Windows Server 2012!

    Hi, I use Robocopy on Windows Server 2012 but when I run my command "robocopy /e/b /ZB /DCOPY:T /COPYALL /R:20 /W:5 /TEE /LOG:Robocopy1.log /V" I recived the following error

    ERROR 32 (0x00000020) copying NTFS security to Destination directory the process cannot access the file because it is being used by another process.

    I try to update of Robocopy, but I have the latest version

    It is a forum for specific consumers.

    You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home

Maybe you are looking for

  • PhotoSmart 6510 E: all-in-one Photosmart 6510 series is no longer able to connect

    I have recently inherited this printer and eventually got it working a few days ago. Now, I'm more able to print wireless from my computer.  My computer recognizes the printer and I have the ability to print with it, but for some reason any, he says:

  • Y510p clean install (software Lenovo)

    Hello I want to reinstall windows 8.1 on my Y510p with a USB (created with windows) recovery. First of all, I wanted to use the OKR (factory Windows 8), but I dualbooted ubuntu and know that it no longer works. I have al the drivers, but the problem

  • Pavilion dv6: need window7 boot disc

    I need disc window7. What I have to buy or I can buy a software from Microsoft?The windows Boot Manager screen appears.

  • Why my Windows Vista disable without changing system.

    I bought my computer laptop 13/02/09.  I had no problem with vista all this time.  I did no hardware changes or upgrades.  Today, I restarted my system and was invited by your copy of windows is not genuine.  I ran the Microsoft Genuine Advantage Dia

  • Error "unable to add images.

    Hardware - V90LE Thin ClientBuild version - V90LE.1993.1024, 0576.1024 Windows XPE Version 5.01, Service Pack 2Flash - 977MBRAM - 1008MBSys - 973 MB partion I picked up a WYSE V90LE and I'm trying to reimage it to remove the currently loaded configur