Shared folder now asking password?

Similar Questions

• After restoring factory and updates for Windows 7, the system now asks passwords

  Recently had to do a factory restore on a toshiba laptop with windows 7 preinstalled top. has restarted the machine once he had comepleted and now it says Admin profile is locked and my username and password do not work

  
  

  1 - password was never set on the user profile. (Yes it may have been stupid not to do that for security, but that a person uses the laptop)

  2nd why admin profile has been locked?

  3rd - without having a password to disk or save it on a USB key, how can I get around this?

  4th - also why Microsoft charges to ask questions and get support on their own products?

  * original title - Windows 7 - had to factory restore after updating to windows 7. now, cannot connect to admin or normal user logon. said needs password. PASSWORDS were never defined for this? Please advise *.

  no disc to try this.

  Ive managed to get it to load the office by changing the settings via safe mode, but with a full restore (some missing drivers, IE the sound card), it always seems to be filled with questions. It runs terribly slow now and still doesn't let me do half of what I need to do to restore its former glory.

  at the present time, this will make a nice door stop or decoration of the table such that it cannot serve to something else other than to gather dust.

  does anyone have a suggestion on how to fix this problem that began after I installed the latest update of windows 7, 2 days ago.

  Try this:

  To access the system recovery environment in Windows 7, simply start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. You will see a new option "Repair your computer", select this option and press 'Enter' on your keyboard.

  This will allow you to start system recovery environment and access to the same tools.

  Mobile: http://www.notebooks.com/2009/10/20/improved-recovery-options-in-windows-7/

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• screen saver now asking password

  For these last days, I had problems with my screen saver. It was scheduled to start after 5 minutes, but usually it will come only after 10 min, or not at all. If it turns on, if off after 2-10 min. I looked here and found what might be a something to do with the numeric value was 1 I had to change that. It does not resolve when the screen saver is, but now, when I move the mouse to stop the screen saver, I have to type my password. Here's the thing, THE-IS - NOT - CHECKED. The password bit began this morning. It's getting more than a little frustrating.

  My computer is a Compaq Presario desktop computer with Windows 7 (Service Pack 2 I think)

  Hello

  ·         The problem happens with a special screen saver or another screen saver as well?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to change the screen saver and check if the problem persists.

  Change your screen saver

  http://Windows.Microsoft.com/en-us/Windows7/change-screen-saver

   

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

   

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Let us know if that helps.

• Connecting to a shared folder, select 'Remember my password', but Windows doesn't remember my password

  When I connect to the shared folder and click on "remember my password", after a reboot, it calls for new username and password and it does not save permenantely, please help "

  You have XP Home or XP Pro?
  In accordance with the following article:

  "Behavior of stored user names and passwords"
    <>http://support.Microsoft.com/kb/281660/en-us >

  "Windows XP Home Edition stores only the credentials of Remote Access Services/Virtual Private Networking and passport."

  You can go to the area to "Manage passwords" as described in the box above and see if your passwords are there or if you can add passwords.

  Another article:

  "Stored user names and passwords credentials are stored for the lifetime of the Logon Session.
    <>http://support.Microsoft.com/kb/281249 >

  HTH,
  JW

• I want to prevent the use of the login and password of CentOS 6.5 to the shared folder Windows 7

  Recently, I lost my hard drive Windows 7 Pro to crash and had to rebuild the laptop from scratch. I have set up the laptop to share files on the local network with XP, Vista, and CentOS 6.5 PC. The file sharing (without need of login/password) with all PC work with one exception.

  When you use the 'of' the CentOS PC file manager to access the shared folder on Windows 7, I am invited with login/domain/password popup box. I enter the credentials and everything works well. And I have to do it once. The same user name exists on all PCs. But I think the connections via file sharing simply under "guest" or "annonimus. The race of Samba (SMB) of the computer of CentOS version is version 3.6.9. I have tried so many combinations of solutions and none seem to work. See the list below:

  Windows:
  Edit local security policies
  Remove the TransportBindName (then add back)
  Set UseNewSmb = 0, then returns to 1

  Samba:
  security = share and then I tried security = user
  client NTLMv2 auth = Yes and return to no.
  NTLM auth = none and return to Yes

  I am hoping there is a configuration that will prvent the annoying popup login/password.

  It seems that my problem has been solved (for me at least). Discovered by searching for another detachment of TechNet
  Listed below are the changes. I doubt that all were required, but there still Big Bang solutions seem to always work when dealing with Microsoft operating systems, Yes?

  The registry

  1 KEY: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa
  DATA: everyoneincludesanonymous = 1

  2 KEY: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa
  DATA: NoLmHash = 0

  3 KEY: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa
  DATA: LmCompatibilityLevel = 1

  4. KEY: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters
  DATA: restrictnullsessaccess = 0

  In the policy editor of local security under the Security Options folder

  1. Microsoft network client: password is sent unencrypted SMB third party = active servers

  In the network sharing Center

  1. go to the advance sharing settings page

  2. Select: Activate sharing files for devices that use encryption 40 or 56-bit

  Test:

  1. reboot Windows 7

  2 reboot the Linux server

  3. open Linux Network Browser (Thunar) application

  4 navigate in the actions of Windows 7 without having to enter the login/password: success!

• I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password.

  Default password Machine virtual XP Mode

  I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password. Please giveme the default password

  If you're talking about XP Mode the default password is XPMUser.  In general you can not use Windows without a password in Windows Virtual PC that you can with Virtual PC 2007 and before.  XPMUser is used only with the XP Mode virtual machine.  All other virtual machines requires a user created password.  If you have changed the password in XP Mode and forgotten, then you have to start over.

  Windows Virtual PC is based on virtual server rather than VPC and all virtual machines need a password.  If necessary, uninstall the integration features, start the virtual machine and create a password for the admin user.  Restart the virtual machine, and then reinstall the integration features.  You will not be able to access a virtual machine created by the user that has no password, while the integration features are installed.  Once you have everything right, that a virtual machine will not be asked a password if you are the admin user in Windows 7.

  @george1009,.

  Everything got?  :)

• Ive bought and downloaded adode acrobat Pro DC and its now asking me for the previous issue. I don't have it. He told me to uninstall the previous version of adobe so I did I don't have the password for the trail version more. How can I fix? I cannot ope

  Ive bought and downloaded adode acrobat Pro DC and its now asking me for the previous issue. I don't have it. He told me to uninstall the previous version of adobe so I did I don't have the password for the trail version more. How can I fix? I can't open any pdf on my computer now.

  Hi brets49833316,

  If you have purchased Adobe Acrobat Pro DC as an upgrade, then a serial number of the previous version which you have like Acrobat X or XI. If in the case where you have not bought one of these in the past, then you must buy Acrobat Pro DC as full version (US $449.00).

  In this scenario, you can return the version upgrade and purchase the full version. To return the Contact Customer Service

  Thank you

  Abhishek

• VMWare Tools shared folder code does not compile on VMWare Fusion 7, Ubuntu asked 14.10, and Clipboard sharing does not work.

  Hello

  After the upgrade to a guest of 14.04 to 14.10 Ubuntu, I tried to reinstall the VMWare tools.  The problems I've come across so far:

  Shared folder code will not compile.  I get the following result:

  do: enter the directory "/ tmp/modconfig-ElOCTG/vmhgfs-only.

  Using the kernel build system.

  / usr/bin/make /lib/modules/3.16.0-23-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.16.0-23-generic'

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/message.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/dir.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/request.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/hgfsUtil.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/cpName.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/rpcout.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/stubs.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/hgfsEscape.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/link.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/transport.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/module.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/file.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/super.o

  /tmp/modconfig-ElOCTG/vmhgfs-only/file.c: in function 'HgfsAioRead ':

  /tmp/modconfig-ElOCTG/vmhgfs-only/file.c:714:4: error: implicit declaration of function 'generic_file_aio_read' [-Werror-implicit-function-declaration =]

  result = generic_file_aio_read (iocb, iov, numSegs, offset);

  ^

  /tmp/modconfig-ElOCTG/vmhgfs-only/file.c: in function 'HgfsAioWrite ':

  /tmp/modconfig-ElOCTG/vmhgfs-only/file.c:786:4: error: implicit declaration of function 'generic_file_aio_write' [-Werror-implicit-function-declaration =]

  result = generic_file_aio_write (iocb, iov, numSegs, offset);

  ^

  Cc1: some warnings are treated as errors

  scripts / Makefile.build:257: recipe for target ' / tmp/modconfig-ElOCTG/vmhgfs-only/file.o' failed

  make [2]: * [/ tmp/modconfig-ElOCTG/vmhgfs-only/file.o] error 1

  make [2]: * waiting unfinished...

  Makefile:1345: recipe for target ' _module_/tmp/modconfig ElOCTG/vmhgfs-only' failed

  make [1]: * [_module_/tmp/modconfig ElOCTG/vmhgfs-only] error 2

  make [1]: leaving directory ' / usr/src/linux-headers-3.16.0-23-generic'

  Makefile:120: doesn't have a recipe for target 'vmhgfs.ko '.

  make: * [vmhgfs.ko] error 2

  make: leaving directory ' / tmp/modconfig-ElOCTG/vmhgfs-only.

  The filesystem (vmhgfs module) driver is used only for the shared folder

  feature. The rest of the software provided by VMware Tools is designed to work

  regardless of this function.

  If you want the shared folders feature, you can install the driver of

  running vmware-config - tools.pl again after making sure that gcc, binutils, make

  and your kernel sources are installed on your computer.

  These packages are available on the installation of your distribution CD.

  [Press the Enter key to continue]

  In addition, the shared clipboard does not work.

  I'm under VMWare 7.0.0 on OS X 10.10.

  Any help or advice will be greatly appreciated.

  
  Thank you

  Jonathan Morgan

  The VMWare Tools included with fusion 7.0.1 solved this problem for me (and without any serious regressions I noticed so far, at least, which is nice but not something I intend on with vmware), so probably the next update of each VMware product should include the updated tools.  Don't know how long updates to other products are coming, however.  Wonder if there is a separate place to get just the tools to day?

• Scan cannot access a shared folder on 10.11.5

  I shared a folder on OSX 10.11.5.  The permissions are correct.  I can access the share from a Windows machine (he asks credentials and is REALLY slow to display files), but when I try to scan a document to sharing it errors every time.  It worked until recently.  I'm 100% sure that the credentials on the scanner are correct.

  Just so there is no confusion I created an account on my scanner on a network (which is on the same subnet) with the same references as those of a user on the OSX machine.  The sharing is visible and accessible in writing from a Windows machine.  When I scan from the scanner (A Konika Minolta Bizhub) it says "error: unable to connect to the server."  This isn't a matter of connection/permissions because when I change the credentials, I get a different error message.

  Any ideas?

  So you're probably aware that Apple has changed the version of SMB used 10.7 and later and as a result many multifunctional no longer able to scan to a share on the Mac via SMB. I know that KM has released a fix for some of their machines that made this work again. Since you mention work recently, I assumed that it was a Mac OS x 10.11.x. Is this correct?

  If Yes, then on the KM, you can navigate to sharing Mac instead of using the address book entry? If you can, and then using this function, you should see the Mac and when you select it, you should get a prompt to authenticate. If you specify the account name on the Mac, that needs to be enabled via system preferences > sharing > file sharing > Options > Windows, then the password file sharing, is the shared folder appears? You get an error at this stage, or when you first select the Mac?

• CANNOT write to files in the shared folder of XP on a PC running windows 7 - but good vice versa

  I have a laptop under Windows 7 (SP1) and a desktop running XP (SP3).  I have connected both via a wireless network. While I can see and access shared files/folders from one computer to the other computer, I can only read/write files in the shared folder on the portable computer that is running Windows 7.

  If I try and change a file in the shared folder from the PC under XP on my laptop, I get the message "this file is set to read-only. Try again with a different name "."  I know that the file is NOT checked for read-only. When I change the name of the file I get the error message "\\Desktop\SharedDocs\filename.doc you are not allowed to save in this location. Contact the administrator for approval.  You want to save in the folder my documents instead? "If I save the file to another location on the laptop under Win7 it save then OK.  I can not just save a modified version of the file in the same shared folder from desktop running XP.
  It seems that it must be something to do with permissions and access to the parameters of the desktop running XP but I can not find these. Fairly easy to find in Windows 7.
  Finally, I don't have a login/password set for the connection to the computer to Office XP.  I don't have a user name and password for the laptop Win7 but you have turned off password protected sharing.
  Anyone have a solution to this?
  Thank you

  OK - the problem is now resolved.

  I noticed that the read-only for the shared folder has been checked. When I unchecked it and also checked the box "allow network users to change my files" in the shared folder properties/sharing, I was able to modify and save files in the shared folder on my laptop.
  It's a little weird because I thought I had done this the other day where the results have been less successful.  Strange.
  Thanks for your help.

• _Capture image questions HPDM4.5 SP4 (Errorcode-400 could not connect to the shared folder)

  Hi, hope someone can help me.

  I'm under HPDM 4.5 SP4 on a member of the domain Windows 2008R2 SP1 x 64 server.

  I try to use the model "_Capture Image" on a light field customer non-member HP T610 (Agent version: 4.5.3360.18502, version of the device: 6.1.7601.286)

  Configured the master repository, used Filezilla server and did a test on the FTP and the Shared folder.

  FTP path: ftp: / //hpdm ("C:\Inetpub\Ftproot\HPDM")

  Path of the shared folder: ------\hpdm

  Bin play with the settings and read this for a day, but no mather what I try, whenever I use the model I get: ErrorCode:-400 could not connect to the shared folder.

  Edit: when I run the model, I see a folder created in "C:\Inetpub\Ftproot\HPDM\Repository\Images\test1_1", but the HP Imaging tool displays some time: set up the share folder. Finally the error task and the test1_1 folder is deleted.

  Please advice

  Hello to all you readers looking for the answer to this...

  @ jeff_x thank you for your response.

  1. all units has no (I tried 5)

  2. now 4.5.3660.16798 running and it works

  3. all thin clients running DHCP

  4. all thin clients and server hp - manager already running in a serparate network.

  But the solution was simple. Had to delete all software HPDM

  Fact Download Manager-cutting (sp60327.exe) HPDM and HPDM SP4 (sp64049) < at="" max="" 200kb/s=""> >

  Installed from scratch and configured the master repository with:

  Name of the repository: master repository

  Server address:

  FTP (FileZilla Server, created a user 'anonymous' without password, shared the folder c:\inetpub\ftproot\hpdm to this user and pressed the button "set as home dir")

  User name: anonymous

  Password: (blank)

  Path: simply put ' / '.

  Protocol of shared folder settings

  User name: \user (created a local user for this purpose and placed it in the local administrator group: Administrators)

  Password: (what you do to the top when you created this account)

  Path: just put in "hpdm.

  Hit test and see if it worked for you. BTW, the test button is not the Holy Grail.

  There should be a better manual to set this up!

  I hope that with this info to help a person looking at the same issue 400 error!

• Configure the SMB shared folder on iMac

  You just bought the officejet pro 8600. I am trying to create a shared folder on the SMB to my iMac running OS X 10.9

  The HP app utility is prompting me to enter my shared folder, but I'm going to an unsecure site and is asking questions, I don't know, as my network path and the user name and the password. Where can I find these things? What is this thing legitimate?

  In addition, in my viewfinder, I the visible shared printer but I can't connect because I don't know my user and password name, that I don't remember setting up and can not find. Help!

  Hi mimifan,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand you are trying to set up the network on the Mac folder.

  I'll be happy to help you.

  You will need to contact Apple to get user and password name.

  I would ask them to help the network also folder setup.

  Here are the steps below to configure the network folder if you want to try.

  1. create a new folder on your computer.

  2. right-click (CTRL left click if you use the keyboard of the Mac) and select read.

  3. unlock the screen, set the expression to everyone read/write &, located under the share permissions &...

  4. enter in System Preferences > sharing and select file sharing in the left bar.

  5. click on the Options button, mark the share files and folders using SMB (Windows) and click done

  6. under shared folders, click the sign more and select the configured folder.

  7. ensure that "everyone" permissions are set to read & write under the list of users as well.

  8. you will see the IP at the top of this screen, make a note to configure the EWS page.

  You must use the following path:

  IP-ADDRESS/Sahred-folder-name

  Be sure to include your user name and password when defining the analysis of the network folder.

  I have provided a document to configure the network folder go measures to see if this will solve the problem.

  How to perform a scan: from the control panel (including the Scan to Email, in PDF format, and to a network folder).

  Go to how scan directly into a network (only for network connections) folder.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Good day!

• A shared folder on windows 2008 r2 is very slow

  Hi all

  The scenario is as below.

  1 Server - Windows 2008 r2 with all updates

  2. customers - both Windows 7 and Windows XP

  3. created a domain and all clients are part of the domain.

  4. we shared a number of folders on the server for clients to use.

  The problem is

  1. very slow access to the shared folder in client systems.

  2. sometimes all shared folders showes upward and sometimes not.

  3. sometimes very little, I mean 1 or 2 folder appear, despite 10 or more is shared.

  4. access is extremely slow.

  5. several once be the Member of the domain while accessing the share he asks credentials, even if the user connects using the domain credentials.

  Troubleshooting of the measures taken:

  1. update the server with all updates.

  2. check the network cables and switch.

  Now, we have recently reinstalled the server, which worked very well, because of some hardware of gradations.

  Please help, very urgent and necessary evil.

  Thanks in advance.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Sharing folder is empty! No modification of the answers! No new answers!

  Hello all, is my first discussion I write in this community and begin to apologize for my English.

  I use Obiee 11.1.7, now only for the tests because we work with version 10, and I made the migration to 11 to see the questions and problems that we encounter in the future when we will need to upgrade to the new version of obiee.

  Recently I change the password of the two schemas MDS e BIPLATFORM and I have some problems I solved.

  But now I see that, for me, is not possible to open the shared folder from the catalog. Whenever I click on catalog I wait minutes but nothing happens, the list of items or folders in catalog remain empty. When I click 'NEW' in the homepage of dashboard, the list of possible to create objects is empty.

  If I try to edit the responses the edit page is blank, I can to see that the list of facts or dimensions, but when I click on the '+' to expand nothing happen.

  I found in the presentation of this type of error log:

  
  

  Saw.httpserver.ProcessRequest

  SearchID is empty

  Leader: ssview.cpp

  Line: 1565

  Geographical area:

  Saw.httpserver.ProcessRequest

  Saw.RPC.Server.Responder

  Saw.RPC.Server

  saw.rpc.server.handleConnection

  Saw.RPC.Server.Dispatch

  Saw.ThreadPool.socketrpcserver

  Saw.threads

  SessionID: 0ai9b6dom443436e51bfochvap7bi302hhh9alq

  AuthProps: AuthSchema = UidPwd | PWD = * | UID = administrator | User = administrator

  ECID: cba04c1adc947202:3050e1b5:142c253db87:-8000-0000000000003dcc, 0:1

  ThreadID: 172463872

  HttpCommand: getReportXmlFromSearchID

  RemoteIP:...

  
  

  
  

  
  

  Saw.httpserver.ProcessRequest

  Invalid query. Note that some URLS cannot be implemented by e-mail or bookmark.

  Leader: webextensionbase.cpp

  Line: 1052

  Geographical area:

  Saw.httpserver.ProcessRequest

  Saw.RPC.Server.Responder

  Saw.RPC.Server

  saw.rpc.server.handleConnection

  Saw.RPC.Server.Dispatch

  Saw.ThreadPool.socketrpcserver

  Saw.threads

  SessionID: 0ai9b6dom443436e51bfochvap7bi302hhh9alq

  AuthProps: AuthSchema = UidPwd | PWD = * | UID = administrator | User = administrator

  ECID: cba04c1adc947202:3050e1b5:142c253db87:-8000-0000000000003dd2, 0:1

  ThreadID: 172463872

  HttpCommand: CatalogTreeModel

  
  

  
  

  Where is my problem?

  Thanks for any help that you could give me!

  What browser do you use? Open Analytics using Mozilla Firefox or IE

• .. .connect to a shared folder on a MAC with director 11?

  Hi all

  
  

  I developed a project a few years back that work as follows:

  
  

  This has been designed to work on Win XP, using Director MX2004

  Server installation
  

  All media when installed on a server and the folder that they resided in a was installing as a shared folder.
  

  
  

  Workstation installation
  

  A projector has been installed on a PC workstation, as well as the Director of projector, a txt file has installed, the txt file contained the unc path where resided all media files. that is all Director & video file etc.

  The projection file could get the unc path, read the text file and open the appropriate dxr file.

  
  

  It worked very well.

  ___________________
  

  My question is, now I'm upgrading to Director 11 software, it is necessary to work the same way on MAC OS x. The only difference in the system will be that media files will reside on a MAC server and workstations are MACs (Macs Intel, who use the latest OSX).
  

  
  

  How can you connect to a shared folder on a MAC with director 11?

  
  

  Its not "\\share_name"... 'afp:\\share_name' should work?

  
  

  I get the cannot find "myfile.dxr" alertbox

  
  

  I hope that I have explained myself well enough.
  

  
  

  Any help would be much appreciated.

  
  

  Thank you

  Jason

  I can't do since Director 11, but you can do with applescript.

  In the AppleScript ScriptEditor, paste the following code, and then save it as an application (like "Mount.app") in the same folder as the projector.

  Then the Director, to write the volume path and the password

  That is to say. AFP://username:password@VolumePath/sharename

  in a text file (like "Mount.txt")

  Then use the command open the Director to turn up the volume

  Open _movie.path & "Mount.txt" with _movie.path & 'Mount.app '.

  -applescript below

  on open (dittos)

  the value volume to readFile (dittos as text)

    if (volume is "") then

  return false

  end if

  VR;

  Turn up volume

  Return true

    on error

  return false

  end try

  Open end

  on readFile (theFileName)

  Try

  the value theFileRef to (open access file theFileName)

    on error

  return ""

    end try

  Try

  game theText to (read theFileRef)

    on error

  game of theText to «»

    end try

  Close access theFileRef

  Return Letexte

  readFile end