[Shared Library] how to call a libarary shared in a windows environment

Similar Questions

• Recommended the Directory Structure of shared storage for deployment of enterprise on Windows environment

  Hello

  I need to install FMW on windows with high availability environment using the storage that is shared in the following way:

  3 windows 2008 R2 servers servers:

  Host1 (Server Admin): gale servers (Server Admin) and EM

  host2 (content 1): wecenter content: servers eats ( COE, WCCUI, IBR, CAPTURE)

  host3 (content 1): wecenter content: servers eats ( COE, WCCUI, IBR, CAPTURE)

  
  

  Host3 will be Host2 high availability on each managed as cluster based server
  

  
  

  the question is how to design the structure of directory on windows environment, I need best practices
  

  I found in the Linux directory structure "Enterprise Deployment Guide for Oracle WebCenter Content" as follows:

  So how do apply on windows

  

  Hello

  Thank you! All the best. Be careful in choosing to shared storage.

  # If your shared file system accessible via CIFS, SMB or Samba, you may search and/or performance indexing and corruption problems when you use the Verity search engine (not supported in 11g).

  # If your file system shared accessible via CIFS, SMB or Samba, you should disable opportunistic locking (oplocks - data client-side caching) of the file system as it might interfere with the normal operations of Content Server. With solutions for storage network (SIN), the performance of the file system may be closely related to oplocking (data caching client-side), which disables the opportunistic locking can cause performance problems. Please plan your architecture accordingly.

  Please feel free to correct if you get your answer to other purposes.

  Thank you

  Amey

• How to call a function in class library?

  Hi all

  Anyone know how to call a function in a library project?

  I have to call using a resource file in a library of a CLDC project project.

  So I write a simple test library and tried to access a function in my CLDC application.

  I tested with 2 following projects.

  1. a library project: TivitFirm

  Sorry I can't answer this from the point of view of the eclipse, I use JDE.  But I suspect that the approaches are similar, even if the detail is different, so maybe this will help you.

  In JDE, you have two options:

  (a) use a jar

  (b) create a dependent project

  (a) I usually use a jar.  So to do this I have a workspace is the library, I compile this, then in my project that uses it, I add the jar to build settings

  (b) in this case, you have two projects in the space of a job, and you say the main project that it is dependent on the library project.

  I hope this helps.

• How to call a shade of the library

  Hello

  I'm writing a script to create a new document from the AI with a restricted swatchbook. The designer is supposed to use only the ink/color chart provided by this script.

  So far, I was able to delete all current shades and add a shade spotcolor CMYK or RGB.

  var inkt02 = app.activeDocument.spots.add ();

  inkt02. Name = ' inkt 2';

  inkt02.colorType = ColorModel.SPOT;

  var kleur02 = new CMYKColor();

  kleur02. Black = 10;

  kleur02.cyan = 80;

  kleur02.Magenta = 0;

  kleur02. Yellow = 90;

  inkt02. Color = kleur02;

  var newSpotColor = new SpotColor();

  newSpotColor = inkt02;

  newSpotColor.tint = 100;

  thePallet.addSpot (newSpotColor);

  Often we discuss Pantone colors. No need to define these, since they are already inside GOT it, no? But how to call from the library?

  I'm new to ExtendScript, but this forum (and google) helped me along well so far :-)  I do not have a case of practical use for this yet, but I decided on this exercise as a good way to learn more about ExtendScript.

  There is no access to the samples library, other than the main Swatches palette. You must add these PANTONE to a document, and then open or place this document to have access to them.

• How to call the library classes threw xml

  In my flash library has "MC."

  var XML = < m c = 'MC' > < / m >

  How to call MC class threw xml.

  It's a little cryptic, but I think you mean like this:

  import flash.utils.getDefinitionByName;
  import flash.display.MovieClip;
  
  var xml:XML = ;
  
  var classRef:Class = getDefinitionByName(xml.@c) as Class;
  var movieclip:MovieClip = new classRef() as MovieClip;
  addChild(movieclip);
  

  --

  Kenneth Kawamoto

  http://www.materiaprima.co.UK/

• How to call the file of JavaScript in the Page header model

  Hello
  
  I created a Javascript custom.js file and uploaded in the shared-> component static files.
  How to call this file in the Header of Page Template, I mean the exact syntex...
  
  Thank you
  Deepak

  Hello

  File name must be typed exactly the same as the file that you downloaded.

  Are you sure that your file is OK? Did you remove

  wwv_flow_file_mgr.get_file?p_security_group_id=4967074027259628303&p_fname=custom.js
  

• problem install shared printer on windows 7 64 bit

  Hey guys

  I recently got a thinkpad IBM with Windows 7 Professional 64 bit.

  We have a HP Laserjet 3015 which is shared on the windows xp professional computer.  I can't install on my computer. If I connect the printer to my computer via the USB port, windows find the drivers and it works.

  The problem is when I try and insatll it on the network it doesn't. I can search and find a computer to which it is attached, and see it in the list of shared printers, but when I ever I try to connect it says connection > > search on windows update > > can't find drivers. It gives me the opportunity to find the drivers to install. I downloaded the drivers on the HP site, but they do not help. whenever I select them in the manual it comes with an error indicating that the driver is not found then give u the option to install it yourself. When you select the driver it says windows cannot find an appropriate driver.

  How can I get around this?

  rory2g wrote:

  I recently got a thinkpad IBM with Windows 7 Professional 64 bit.

  We have a HP Laserjet 3015 which is shared on the windows xp professional computer.  I can't install on my computer. If I connect the printer to my computer via the USB port, windows find the drivers and it works.

  The problem is when I try and insatll it on the network it doesn't. I can search and find a computer to which it is attached, and see it in the list of shared printers, but when I ever I try to connect it says connection > > search on windows update > > can't find drivers. It gives me the opportunity to find the drivers to install. I downloaded the drivers on the HP site, but they do not help. whenever I select them in the manual it comes with an error indicating that the driver is not found then give u the option to install it yourself. When you select the driver it says windows cannot find an appropriate driver.

  Try the following: on the Windows 7 computer go to file devices and printers, add a local printer, printer, create a new port, port Local, next, \\xpcomputername\lj3015 (where you put in the real share of the computer name and printer), OK, Windows Update (and wait for the list to repopulate), HP Laserjet 3015 PCL5, then, then.

• When I use the library function node call in real time, is loaded only once for all or load the DLL whenever it is called?

  When I use the library function node call in real time, is loaded only once for all or load the DLL every time when it is called?

  I have a critical application in real time, in which I use a piece of DLL function developed in C++.  It is ok?  Make sure any senior developer?

  Thank you in advance.

  The user interface thread is the thread that is used to update the user interface. It's slow. And it's supposed to be that way because humans are slow.

  The call library function node can be configured as this thread to use in the configuration for it dialog box. Please visit the LabVIEW documentation on how to do this.

• How to call a DLL function that has need of an array initialized structures which can be written in by the DLL?

  I need to call the following function in a C DLL:

  __declspec (dllexport) int MSIL_EnumSpectrometers (SPECTROMETER_ID * spectrometers);

  where the only parameter is a pointer to:

  typedef struct
  {
  tank model [32];
  series char [32];
  Channel int;
  } SPECTROMETER_ID;

  Before LabVIEW 2011 I would use a CIN allocate the memory and call the function, but in LabVIEW 2011, the INC has been deleted and I have to use a library function node call instead. When I go to set the parameter, it seems that I need to set the type to "Adapt to the Type" and data for 'Pointer to data in table' Format, then pass an initialized array of SPECTROMETER_ID with the many elements he so the DLL can fill the table with data. (See the attached picture.) When I do that, however, it blocks LabVIEW desktop.  I guess it is because the DLL is corrupting the memory space of LabVIEW, but I don't see why, because I'm basically passing in a void pointer to an array initialized in the right size. Note that the first node of NSI returns the number of elements required in the table.  Anyone have any idea what I'm doing wrong here?

  In LabVIEW, when a table is in a cluster - cluster don't detain actually table but sort of a pointer that points to the table. If you need the cluster to contain 32 to 32 Add to the cluster. See the VI attached to how it's supposed to be done.

• Unable to connect to shared printing on Windows XP from a Windows 7 computer

  I am trying to connect to a shared printer on an XP of windows on my new noyebook of Windows 7 and Windows & says unable to connect to the printer. I tried to connect using a local port and appointing the path UNC \\Computer1\CanonMP780 ie it errors saying Server doent have not enough storage is available to process this command.

  I'm trying witts end trying to connect these two computers with Win 7 to this printer. Other XP and Vista machines work OK

  And how does this relate to the features of Windows Update? Try this forum instead: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have problems with network file sharing on 3 Windows XP computers.

  I created a network of small business between 3 workstations.  The last 2 set up on the network can communicate and share files between them, but cannot connect to the 1st workstation set up on the network to share files.  connect to 2nd & 3rd ws 1 ws.  a ping to the 1st ws is OK.  followed all the instructions for sharing and folder permissions.  is there any security on ws 1 problem that I forgot?

  original title: shared folders

  Hello

  Follow the steps in troubleshooting these items:

  How to troubleshoot a network home in Windows XP

  How to use Simple file sharing to share files in Windows XP

  See also:

  How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP

• How to call the REST Webservices via native J2ME app.

  Hi, can someone help me how to call REST Webservices via native J2ME app. I don't want to use the HTTP request. Is there a possible way to call via AJAX, if so how? I use only the RIM and the J2ME API. Thank you, joy

  JSON is just the format fo the data returned.  So all you do is make a standard HTTP call, get the data and analyze using JSON.  OS 6.0 includes JSON, but OS 5.0 doesn't work, then you will need to get a JSON library if you want to use in the 5.0 OS.

  You might find them useful:

  http://supportforums.BlackBerry.com/T5/Java-development/JSON-library/m-p/573687

  http://supportforums.BlackBerry.com/T5/Java-development/sample-code-implementing-JSON-in-your-applic...

• Resources shared on XP in Windows 7 but cannot view shared resources on Windows 7 XP?

  Suddenly, my network has gone from wack-o!

  I cannot view shared resources (disks, folders) on the 7 machine Windows XP machine, but can view shared resources on Windows 7 machine from XP machine?

  Machine error message Windows 7:
  Windows cannot access \\machine\folder
  You are not allowed access to the \\machine\folder.  Contact your network administrator to request access.
  
  When I created the sharing folders and drives (on both XP machines and 7), the permissions for everyone.  I have the same name of user account on both computers.

  What is going on?

  Your general statement "Windows 7 has problems to access shared resources on XP" is incorrect. Yes, you have problems, but I have and none of my clients, amounts of problems to access the resources on XP Windows 7 boxes boxes. If something has changed in your situation, even if you don't think he has. It is very difficult to solve network problems without being on-site, but your error message does not indicate a problem with the username/password accounts, permissions or misconfigured firewall. All I can do is give you my usual network troubleshooting steps and you suggest to go through them. Also given that the problem comes from the XP box, troubleshooting of small network of Hans-Georg Michna MVP might help.

  http://winhlp.com/wxnet.htm - small troubleshooting network by Hans-Georg Michna

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  XP - set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory. MS - MVP - Elephant Boy computers - don't panic!

• I lost all my Muse Widgets in the library, how can I get back them?

  I lost all my Muse Widgets in the library, how can I get back them?

  Wait, so you mean the real Widgets in the Widgets Panel?

  Not the library where you can store your own stuff (users also tend to call these widgets...)?

  Could you give the name of this widget that you have installed, which seems to have caused harm?

  I think the best solution is to go to the Adobe CC , this Panel application where you can manage all Adobe applications. Uninstall Museand re-install it.

• How to call the pl/sql function in application of the ADF

  Hi Experts,
  
  I need to call the pl/sql function in application of ADF, I have logic written in my AM
  
  Method:
  
  public String reportStoredProcedure (locationID customerID, number,
  String tailNum) {}
  
  CallableStatement st = null;
  String v_sanctioned = null;
  If (locationID! = null & & customerID! = null & & tailNum! = null) {}
  System.out.println (locationID + "" + customerID + "" + tailNum);
  Tail string = "TAIL";
  String result = "N";
  
  try {}
  String stmt =
  "start XXWFS_SANCTIONS_PKG. CHECK_SANCTION(:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11); end; « ;
  St = getDBTransaction () .createCallableStatement (stmt, 0);
  st.setNull (1, Types.VARCHAR);
  st.setNull (2, Types.NUMERIC);
  st.setObject (3, customerID);
  st.setNull (4, Types.NUMERIC);
  st.setNull (5, Types.NUMERIC);
  st.setObject (6, locationID);
  st.setNull (7, Types.NUMERIC);
  st.setNull (8, Types.NUMERIC);
  st.setObject (9, tail);
  st.setObject (10, tailNum);
  st.setObject (11, result);
  St.Execute ();
  System.out.println ("v_sanctioned in AM:" + v_sanctioned);
  } catch (Exception e) {}
  e.printStackTrace ();
  return "N";
  } {Finally
  If (st! = null)
  try {}
  St.Close ();
  } catch (Exception e1) {}
  E1. PrintStackTrace();
  return "N";
  }
  }
  } else {}
  System.out.println ("v_sanctioned is null");
  v_sanctioned = "N";
  }
  Return v_sanctioned;
  }
  
  
  Error:
  
  java.sql.SQLException: ORA-06550: line 1, column 7:
  PLS-00306: wrong number or types of arguments in the call to 'CHECK_SANCTION '.
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored
  
  at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
  at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
  at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)
  at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
  at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:950)
  at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1224)
  at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)
  at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3487)
  at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3858)
  at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
  at weblogic.jdbc.wrapper.PreparedStatement.execute(PreparedStatement.java:99)
  at model.view.CardAMImpl.reportStoredProcedure(CardAMImpl.java:182)
  at com.emboss.bean.ReadyToPrint.invokeVSanctioned(ReadyToPrint.java:485)
  at com.emboss.bean.ReadyToPrint.PrintingCards(ReadyToPrint.java:434)
  at com.emboss.bean.ReadyToPrint.printCards(ReadyToPrint.java:204)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
  at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
  at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
  at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259)
  at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
  at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97)
  to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:90)
  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309)
  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94)
  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:812)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:292)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:420)
  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:420)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:94)
  at java.security.AccessController.doPrivileged (Native Method)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.doIt (WebAppServletContext.java:3684)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3650)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  
  Can someone help me how to call...

  Call it in function, not as a procedure you do

  try {
  String stmt =
  "begin :1 := XXWFS_SANCTIONS_PKG.CHECK_SANCTION(:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12); end;";
  st = getDBTransaction().createCallableStatement(stmt, 0);
  st.registerOutParameter(1, Types.VARCHAR);
  st.setNull(2, Types.VARCHAR);
  st.setNull(3, Types.NUMERIC);
  st.setObject(4, customerID);
  st.setNull(5, Types.NUMERIC);
  st.setNull(6, Types.NUMERIC);
  st.setObject(7, locationID);
  st.setNull(8, Types.NUMERIC);
  st.setNull(9, Types.NUMERIC);
  st.setObject(10, tail);
  st.setObject(11, tailNum);
  st.setObject(12, result);
  st.execute();
   = st.getString(1);