Sharing - a printer is connected to a Mac using Airport Express to connect to the Internet.

Similar Questions

• HP Deskjet 3510: Printer not connected to the Internet after new router purchase.

  After buying a new router, printer does not work. Is not connected to the Internet. I followed the instructions on how to connect but nothing I did helped. Wireless test results show the printer are currently configured with an automatic IP address, I don't know why or how this happened. Also shows that wireless and wireless is working and success to the configuration of the printer, just not connected to the Internet.

  Yes you will need a printer USB cable like this.

  http://www.Amazon.com/AmazonBasics-USB-2-0-cable--male/DP/B00NH11KIK/ref=sr_1_1?ie=UTF8&QID=1458167924&SR=8-1&keywords=printer+USB

• HP Officejet Pro 8610: printer directly connected to the Internet

  I'm trying to register for the HP ink cartridges.  The application calls a code to write on request.  However, the printer tells me that Web services are not enabled on my printer.  How can I connect a printer directly to the Internet.  I use a USB cable to connect the printer to my laptop.  Can someone help me so that I can complete the application of the ink?  Thank you!

  mcbrighde

  Hello @mcbrighde,

  Welcome to the Forums of HP's Support. I understand you are trying to join the instant ink program, but need assistance in obtaining your printers code request. I would like to help.

  In order to get the printers claim code, you will need to have the printer on a wireless network. An ethernet or LAN connection will also work. This will give the internet access to the printer so that the ink levels can be monitored.

  You need not remove your USB connection for the printer on the wireless network.

  The following link will help put your Officejet Pro 8600 on the wireless network.

  HP OfficeJet printers - printer wireless (Windows) installation

  Once the printer on the network, tap the icon of ePrint/Web Services to enable Web Services and acquire the printers claim code. The icon you are looking for is in the lower left corner of the screen printers.

  

  You can also use the following link to view more detailed instructions.

  HP - service and using HP ePrint printers

  If you need further assistance or have any other questions please let me know.

  I'll be happy to help you.

• Re: efax on HP 7510 registration. Printer is connected to the internet but says efax said record n

  What is the fax - for 20 number for free

  Have you first registered the printer to eprintcenter.com? I would like to print information pages and make that first, it will send and receive faxes through eFax more smooth. Also, be sure to customize the email address of the printer during the installation on the eprintcenter.com site. To print the page of information for this set up. Tap the icon in the upper left corner of the screen of the printer that looks like a piece of paper with a target behind her. Then select the print report option, and the page that prints will have the printer code and instructions, you must set up ePrint for the printer.

  You need to register from the front panel of the printer to get the fax number and the free account set up. Once you enter the information under the efax icon, it will send the PIN for the eFax account provided during registration personal e-mail address.

  To register, tap the eFax icon in the lower right of the display of the printer. First time users will need to select Save, then accept the terms and conditions of use and then complete the information requested on the screen (e-mail, name and zip code).

  The fax number is not local, but it is free of charge.  Once registration is complete, the efax screen will come with a keyboard and a field where you may be able to start sending faxes. In the left corner, you will see your fax number on the screen of the printer.

• When you try to print photos or turn them into a book, I constantly get the message that I 'am not connected to the internet"when I am clearly, via wifi.

  PHOTOS, Version 1.3 often gives me an error message "you are not connected to the internet" when I am clearly, via wifi.  This happens when I try to print a photo or to place pictures in a book.  (It also happens when I ask to export a photo on the desk, but then it is exported, despite the error message.) In the preferences of pictures, I chose "download the originals of this Mac", but the problem seems to be when the photo of the cloud recovery.  My operating system is up-to-date: 10.11.3.  My desktop Mac is mid-2010.  I take quite a few photos, and maybe download them to the cloud and then download them to my computer takes a long time.  That's the only explanation I can find.

  You have activated the iCloud photo library and selected the option to optimize the photos in your local library?

  If Yes, then the Photos is a download full version size for use in the book, print, or share via email, etc.

  

• MY HP PHOTOSMART 7520E PRINTER IS NOT CONNECTED TO THE INTERNET

  I have a wireless printer HP Photosmart 7520e and following a power failure, I lost my Internet connection.  The printer works fine without any other problems, but for some reason any that it does not connect to the Internet. Appears on the printer 'wireless Direct' but it is not connected to the Internet.

  Hi filgrastin,

  Thank you for your answer! I have a few questions for you:

  • You are using a Mac or Windows operating system? What is the version number? To find the exact version, visit this link. Whatsmyos.
  • How far is the printer from the router?
  • What falls down on the Test report wireless?

  Here's how to print a Test report Wireless:

  • Load the white plain US letter or A4 paper in the tray, if it is not already.
  • On the Control Panel, press the Setup icon, and then tap on wireless. Wireless menu.
  • Press the Test report print wireless. The printer prints the test page.

  If you are running Windows, please try our HP print and Scan Doctorand let me know what happens.

  We hope to hear from you. and have a nice day!

• Airport utility: green points on the AirPort Extreme & Internet; Mini Mac does not connect to the internet.

  Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

  The airport connects using DHCP in Bridge Mode

  The router address is 192.168.80.1

  Address IPv4 is 192.168.80.2

  DNS server is the same as the router, but grayed out

  Mac Mini IPv4 Address is 192.168.80.3

  IPv6 automatically configures

  Also updated the firmware of the airport; no change.

  ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

  Any ideas to fix?

  Thank you.

  Post edited by: en maschera

  but my my Mac mini does not connect to the internet.

  The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

  Hello

  Network preferences may be damaged.

  Open the Finder. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  / Library/Preferences/SystemConfiguration

  Click OK, and then move all files in the SystemConfiguration folder to the trash.

  Restart your Mac. See if that makes a difference.

  Your Mac will generate a new SystemConfiguration folder for you.

  Then open AirPort Utility located in HD > Applications > Utilitiies

  Make sure that both Internet and Extreme are green.

  

• printer does not work it tells me not connected to the internet

  my printer just stopped working.it says it is not connected to the internet.it was before.

  Exact wording of this message?

• How can I determine the MACaddress of the Gen 4 Apple TV so that I can connect to my network. Must register on the router MAC address to connect to the internet.

  Security on my network requires that the MAC address of the device must be registered on router or I can't connect to the internet. Does not use a password based security configuration. How to find MAC address before the introduction of Apple TV?

  Contact your ISP

• HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet

  So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.

  I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.

  All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.

  This printer makes me crazy - please help

  Hi @mastersword64,

  Welcome to the HP community!

  I hope you have a pleasant experience with us.

  I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.

  Here are some steps, I suggest trying to get your web services up and running it again:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser on your computer.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select network address (IP)

  6. Select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply. You can get a warning simply select OK.

  Please reply to let me know if these steps resolve your issue.

  Good luck!

  

• Install the device driver of printer not connected to the computer

  My printer is too old to connect to my new computer.  I want to "print to a file" and move the file to another computer on which the printer connected (this second computer is not connected to the internet). How can I install device driver on the new computer with no attached printer?

  Hello

  1. What is the brand and model of the printer?

  If you want to move the file to another computer, you can copy the file to the flash drive and move to the other computer, so that you can print the file.

  Check out the links.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

  http://support.Microsoft.com/kb/308028

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  http://support.Microsoft.com/kb/293118

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/move-files-and-settings-to-new-computer

• Network and sharing Center shows not connected, but the computer is connected to the wireless network

  When I open the network and sharing Center, or hold my mouse pointer on the icon of internet connection in the bottom right of the taskbar, it shows that I'm not connected to a network. However, I know that I'm connected to the internet. My internet and e-mail work correctly. Also, when I click on the 'Connect to a network' option, find the list of available wireless networks, and it shows that I'm connected to my home network. How can I make Windows everywhere where I am connected to the internet, instead of recognizing only on the list of the networks without wire-available?

  Had exactly the same problem on Windows 7 (win7). Connected to the Internet but the status showing no connection and a red cross on the network icon. Problem has also caused problems to connect to Lync and Office365 along with VPN, which apparently uses the status to check whether the connection is available.

  Found the solution here: http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/df17c593-e78f-4878-97b0-7569307934c5

  Apparently, certain permissions gets hurt in the database record and must be fixed using RegEdit. The solution is a step by step and likely to be resolved simply by removing a cache of file using RegEdit and potentially affecting certain permissions.

  It will be useful.

• I am connected to the internet, but my network sharing Center proclaims that I'm not.

  The paradox connected but not connected

  I am connected to the internet, but my network sharing Center proclaims that I'm not. Because some of my programs believe later, they refuse to patch. Also, I used the antivirals ware, scans, System Configuration and deleted and later restored the wireless network.

  Any help would be greatly appreciated. Thanks in advance.

  Hello

  1 reboot as often, this allows the refresh icon and also stops a few things of
  interfere with the slot troubleshooting process.

  Do a 1 Restore Point then you can go back to where you were if necessary.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  ------------------------------------------------------

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Do
  It will be the same for network (NIC) card - then right click on the devices and UNINSTALL - Reboot -
  update the driver stacks.

  Now go look at the site of the manufacturer of the system for the updated drivers.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -----------------------------

  Allow you to reset your TCP/IP stack just to make sure:

  Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset

  ----------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT.

  ---------------------------------
  Other tips:

  If the use of a wired cable - Control Panel - device - network adapter - (NIC) Manager - double
  Click Advanced settings and set the "speed & Duplex" 10 Mbps full duplex and then try 1/2
  double-sided. Be sure to APPLY / OK. Maybe some help here: (don't forget the answer is)
  complicated because there's probably more than one single thing, the origin of the problem)

  Others.

  http://www.pctipstricks.com/tips-for-troubleshooting-network-cable-unplugged-error-for-wired-Microsoft-platform-PCs/

  http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/

  http://www.annoyances.org/exec/Forum/WinXP/1109372091

  There are many causes, one of which is the small monitor pays attention to the evil network device.
  You can try to disable any other network such as WiFi device and reboot to see if that has an effect.

  Still a problem of equipment such as a loose network card that is not properly attached to the computer can
  cause this.

  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Web services Officejet 8100 printer cannot connect to the server

  I tried to set up ePrint - HP connected on my Officejet Pro 8100, which, for some reason, it's own decided to disable the eprint service. When I try to connect to get the confirmation code for HP connected, this message appears

  "Unable to connect to the server.

  Check the Internet connection and try again. Or contact your system administrator or the person who set up the printer.
  If your network requires a proxy server address to connect to the Internet, click Proxy enter or check your browser settings. »

  I tried all of the suggestions posted in this post-

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile-printing-and-ePrintCenter/cannot-connect-to-se... - but none solved the problem.

  Apart from not using web services or filing a compliant under the terms of the UCC for the guarantee of marketability, what to do next?

  Hello RealGomer,

  Welcome to the Forums of HP Support!

  If I understand your message your Officejet 8100 is more connected to the Web Services and you have tried to assign a manual IP address of the printer.

  In the link you provided I have not seen any information about which server DNS has been used, because it is usually the cause / root of the problem, try to enter the DNS name of 8.8.8.8 & 8.8.4.4. To enter, you must be in the Web integrated to the network printer server.

  If this DNS information do not resolve, I'll get another for the DNS installation program.

  See you soon,.

• HP OfficeJet 5740: printer connected to the internet

  Hello!

  So I recently got the Officejet printer and I was not able to connect it to my computer.

  I live in the dorms of my college and internet needs to go to a website and log as long as student.

  I don't know not to connect to the internet.

  Help?

  Hello

  Please contact your network administrator. In many dorm environments, administrators will not allow students install printers wireless on the uni/College networks. I myself would not install printers on this environment because people can use easy my printer to print their documents. Again, you have need to talk with your network admin how to connect (if you were smoking to) your printer safely.

  Good luck.