Sharing feature reads 'no service' after upgrade to Capitan

Hello

Since the upgrade to El Capitan buttons sharing on bed 'without services' applications when you click on to. After working with trouble shooters Apple using the 'chat' service, we managed to get the button share to show the many options except Mail. Mail continues to be absent from the button share. We have found that if I created a new user account, the button in this new account would show Mail as an option of sharing. So... does anyone know how to see the mail as an option of sharing within a specific user?

We have been through and emptied all the folders named "cache". It was after we got done and restarted the computer the different options showed up but, alas, no email. You should know that the Mail does not appear in the extension Panel in the preferences system under Menu 'action '.

Thank you

Julian

Julian,

You do not contact Apple, do not read or participate in these forums. We are all users like you!

If you have any comments for Apple, please use www.apple.com/feedback.

Tags: Mac

Similar Questions

  • No service after upgrade the server to 5.2 on El Capitan

    I have a web server that was doing very well until I left the 5.2 update suggested to install OS X Server. I can't get to broadcast web pages. Screen sharing works always and nothing has changed on the routers, etc.

    I restarted the server after the update and restarted the server itself several times but keep getting connection via a browser failures.

    I did the upgrade even on other servers as well as the upgrade of Sierra. This server is running El Capitan, and is the only one that gave me problems. 5.2 server is not compatible with El Capitan?

    Some additional info:

    I can connect to the server through ftp and other services; just no web service.

    Port tests show that port 80 is not blocked

    Using the IP address I can get to the window of the home server.

    Accessibility means no services available

    Websites is on and I can't find anything that is not defined in law or is different than before the update.

  • Location of the service after upgrade to vSphere Console

    In December, I improve VMWare VCenter and servers ESX, vSphere 4.0 3.5 u1. I then discover that my Service on hosts 3 Console, have changed rather than the local store, to a shared SAN store. I can find it, is the only workaround:

    de : http://www.VMware.com/support/vSphere4/doc/vsp_esx40_vc40_rel_notes.html

    If you choose a store of data shared for the service console, the installation or upgrade of software tool does not issue a warning

    For ESX 4.0, the service console must be installed on a VMFS datastore that resides on the local host drive or on a drive of SAN which is masked and zoned on that particular only host. This version does not support the installation of the service on a data store console that is shared between the hosts. When you install ESX 4.0 or upgrading to ESX 4.0, you must select a store location of VMFS data for the service console (esxconsole.vmdk). If you select a data store that is shared between the hosts, the installation tool or software upgrade does not issue a warning.

    Workaround: Do not install the service on a VMFS datastore console shared between hosts.

    Is there someone who can tell me, how to move the service console?

    Best regards

    Peter

    I do not think that it is possible to move the ESXConsole.

    Read this post http://communities.vmware.com/thread/214439

    The easiest way is to reinstall GUESTS concerned with access to SAN.

    In this way, that you don't have the ability to install ESXConsole on SAN disks.

    I googled and found this post that explains how to handle the ESXConsole, maby this will help you.

    http://getvirtical.blogspot.com/2009/11/making-cloned-boot-LUNs-boot-with-ESX4.html

    If you have found this device or any other answer useful please consider useful or correct buttons using attribute points.

    Concerning

    A. Mikkelsen

  • ProBook 4540S: 4540S HP cannot access fingerprint reader to login after upgrade windows 10

    Updated for Windows7 professional relatively smoothly. During the upgrade to Windows 10 required an uninstall of the HP tools protect and all files related; I guess it was the program by using the fingerprint reader when I first bought the lap top

    The BIOS is configured to allow the biometric device. Device Manager displays the "Validity Sensor" and is the latest version of the driver 4.5.133.0. Made the change of the parameter of gpedit.msc and went to the Admin tab to allow the use of biometric devices and sign in using biometric devices. I even went to the settings of power and unchecked the biometric cutting attribute as an energy saving

    Under the windows settings 10 for accounts under sign on options, there is no attribute for the biometric recognition and/or face. I added a PIN in the hope that it would seem, but nothing. Windows "Hello" is none existing

    Any help or suggestions appreciated

    Well well after having spend hours with tech support windows, they were able to verify that the pilot of validity that HP hs will not work with windows

    Forums search has found a link to the Lenovo for an updated driver for the device for detection of validity... It is packaged as a Synaptics driver http://support.lenovo.com/us/en/downloads/ds103635

    BTW - Synaptics now has Validity Sensor

    Uninstall all HP drivers in Device Manager

    The FP reader will show eventually as a unklnown device

    Install the pack driver Lenovo Windows 10... computer startup be and the the devive will re - show with the updated driver

    What d you know, now Windows Hello appears in the folder accounts, and you can use your fingerprint reader

    Shame, that we must go to another source instead of HP update their list of drivers

  • B50-30 AIO - SD card reader not detected after upgrading Windows 10. Solved.

    AIO B50-30 (F0AU002US) SD card reader was not detected after that I upgraded to Windows 10. I have installed all the appropriate drivers found on the page for assistance with on Lenovo a fix. Device PCI Device Manager had no driver.

    I installed the driver below and my problem has been fixed.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

    I hope this helps someone else?

    Mod edit: System model added to the front of the subject line to improve visibility / clarity

    Thank you for the help with the Forum. I find the help I need with my new Lenovo.

  • No. 3 service after upgrade iOS 9.3

    I just end installed iOS 9.3 upgrade on my iPad 2. I have now lost my 3G access with a service not showing status. Any ideas?

    Just removed my SIM card and put in. Fixed a problem!

  • SD card is available in read-only mode after upgradation of KITKAT in HP slate voicetab 7?

    Hello

    I'm unable to access my external in write mode card after the upgrade to KitKat.

    I also formatted my card, the problem persists.

    I use HP files and also the commendar exploreres file manager to access files/folders.

    Please fix as soon as POSSIBLE.

    Hello and welcome to the HP support community!

    Google has changed the way Android works, not HP.

    Maybe this article can help to explain the evolution of Google Android KitKat 4.4:

    KitKat and SD - what is fixed, what's broken and what is misunderstood.

    WyreNut

  • Fingerprint reader not working after upgrade to win 8

    HP Pavilion DV6T

    Product number: WW142AV

    Operating system: Microsoft Windows 8 (64-bit)

    I upgraded to WIN8 pro to Windows 7 home premium, a few days ago.  Now my fingerprint reader is no longer lights up or scan my fingerprint.  I checked the driver in Device Manager and it says that the driver is up-to-date and that the equipment is working properly.  I also downloaded the latest update of the software Simplepass Win8, but it does not help.

    Nevermind, I found a good solution to the KingsRook14 user on a microsoft answers forum.  It worked for me!

    Validity for WIN8 sensor fix

  • iOS9.3.2 Adobe reader keep crashing after upgrade to 16.09.20

    Keep crashing when attemptping to open the application

    can open for a while, but then very slow when scrolling

    then crashed to 3 minutes

    Hi mmk5576667,

    Acrobat Reader 16.09.21 is now available in the App Store.

    It should solve the frequent accidents that you have experienced.

    Please try it and let us know if it works for you.

    We apologize for the inconvenience.

  • can I reuse my retail ultimate vista after upgrading to windows 8 pro

    Hello

    I read somewhere that after upgrading my Vista Ultimate retail copy to Windows Pro I can reuse the key product & Vista Ultimate DVD on another computer, is - it true?

    Thank you

    FLOSS

    Hello

    No, it is not true.

    If you upgraded from Vista to Windows 8 using the Vista license under the qualification of license, the license of Vista becomes an integral part of the legal license of 8 Windows and you are not allowed to install Vista on another computer.

    See you soon.

  • my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

    my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

    Hi rog247,

    Thanks for posting here in Support of Apple communities! After reading your post, I see that your iPhone 4S shows 'No Service'. It is certainly important to have access to mobile data; I would like to help get this sorted out.

    Please follow the instructions here:

    If you see no Service or research

    If you see no Service or search on your device, or cannot connect to a cellular network or cellular data, follow these steps:

    1. Check your coverage area to ensure that you are in an area with a cellular network coverage.
      • If you cannot connect to a cellular network on your iPhone, make sure that the cell data is on in settings > cellular*. On your iPad, go to settings > cellular data.
      • If you travel internationally, make sure that your device is set up for data roaming. Go to settings > cellular > data roaming.
    2. Restart your iPhone or iPad.
    3. Looking for a carrier settings update.
    4. Update your iPhone or iPad to the latest version of iOS.
    5. Remove the SIM card and put it again. If the SIM card is damaged, or does not fit in the drawer of the SIM card, contact your carrier.
    6. Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.
    7. If you have another device, see if you can connect your business with her network to this place.
    8. Contact your operator for:
      • Make sure your account is active and in good and due form.
      • Make sure that there are no failures in your area.
      • Verify that your device is not blocked to receive cellular services and is set up with the right data plan.

    If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account, or your network, try to restore your device.

    If you cannot connect to a cellular network or cellular data - Apple Support

    See you soon!

  • Windows 7 Home Premium x 64: activation of the service Windows Update crashes my computer after upgrade RAM

    A few days ago I had two sticks of 2 GB GSkill RAM by mail. Here's the same brand, model and size as the pair currently installed (obviously). (Sticks alternate according to the specifications of the card from my mother)

    After you have installed the new RAM and the computer starts up, it freezes within about 30 seconds of connection. Before installing the new sticks, I had no problem whatsoever.

    My first thought is that I sit the RAM properly, then I go and reinstall it. I start, and the same thing happens.

    So obviously this RAM must be bad, right? When I take out news, not gel. Ah, but when I remove the OLD stuff and use new instead, I ALSO no gel. So maybe it is not the RAM.

    Then I reboot in safe mode. No gel. Interesting. I opened the window 'System' and it says "memory (RAM) installed: 4.00 GB ', which is correct." I opened CPU - Z, and it reports also 4 GB of memory. I run a few hours and have no problems whatsoever. So I say to myself, there must be either a Windows service or a 3rd party service is causing the issue and not the new RAM.

    I disable all services of 3rd parties and restart in normal mode. It freezes. OK, so maybe (though unlikely) I have a virus any (I say probably not because I have to) run the module additional firefox NoScript, and set to block all flash, javascript, xss, iframes, etc. - in other words, only allow to my whitelist and B) I have Windows Firewall and running McAffee and updated.). But I decided to first try Windows services for the hell of it.

    So I enable only the services that start in safe mode as my reference, disabling the rest via services.msc. I start normally and not gel. Great, then maybe it is a Windows service. I start which allows one service after another without any problem. I get to the bottom of the list and select the Windows Update service. Within literally 10 seconds my computer crashes. Large.

    As a validation test, I put all services back to the base line of safe mode and only allow Windows Update. I start normally, and again once it freezes.

    Another test of validation, I start with all normal, but disable Windows Update. Do not freeze. I'm going to start Windows Update. Yet once, it freezes for about 10 seconds. So clearly something is in place.

    As a third and final sanity check, I remove the new RAM and run a Windows Update. He finds a few optional updates, but not critical. My system is up2date.

    My only attempt to solve this problem so far was to backup all Windows Update DLLs (C:\windows\system32\wu*.dll, although I don't know if these are good) and do a scan sfc to replace them with copies of 'good '. It did not work.

    So my question is:

    Why cares Windows Update that I have 4 GB of memory installed?

    Thank you

    Jon

    1. I 'upgraded' from the RC of Windows 7 x 64 for Win 7 x 64 Home Premium.

    2. I use McAfee VirusScan Enterprise 8.7.0i, DAT version 6060, Scan Engine 5400.1158

    3 No.

    4. No, I put together this computer myself.

    ______________________

    To answer my previous posts:

    I think the USB storage is a separate issue. And.

    I think I * may * have solved the problem of origin with one or more of the following (don't know who):

    • Updated the software of the chipset of the card from my mother.
    • Updated HD Windows audio drivers to the recommended ASUS (Realtek) HD audio drivers
    • Updated since Windows installed NVIDIA display drivers for version NVIDIA WHQL.
    • Increased my tRFC (refresh time of line) to 70 52 clocks clocks. Set my GSKILL DRAM voltage recommended by 2.1V. Off the SPD DRAM configuration (I read that ASUS is not entirely based on the SPD and can affect things on its own).

    I had WU for 20 minutes from writing this post without a freeze, so we'll see. (Previously, it would freeze within 10 seconds of turning on WU)

  • Him find on page feature broke after upgrade to FF 37.0.2 on OSX. Known issue?

    After upgrading from 37.0.1 to 37.0.2 my cmd + F and edit > find the feature no longer works. I no longer get the search box in the lower left corner of my browser. Is this a known problem in 37.0.2? Is there a fix or a workaround? TIA

    Hello

    Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

    If Firefox is open, you can restart Firefox Safe mode in the Help menu:

    • Click the menu button

      click Help

      then select restart with disabled modules.

    If Firefox does not work, you can start Firefox in Mode safe as follows:

    • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • On Mac: Hold the option key during the startup of Firefox.
    • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
      (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

    When the Firefox Safe Mode window appears, select "start mode safe."

    If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    When find you what is causing your problems, please let us know. This might help others with the same problem.

  • Reader SuperDrive does not burn after upgrade of el capitan

    Almost immediately after upgrading a mac mini end of 2014 to el capitan (10.11.2), the superdrive has lost his ability to write DVD. It is recognized by the system and can read DVDs fine, but any attempt to burn files or an ISO image on a disc breaks down.

    The superdrive even happily burn on the same media on other macs in Yosemite (I checked several times), but he stubbornly refuses to do it on el capitan. The same mac mini was happily burn DVDs on the same media with the same superdrive on Yosemite, just before the upgrade to 10.11.2.

    Now, with el capitan, attempts to burn ISO images fail with the message:

    "Error burn image to disc: the disc can't be burned; It might be incompatible with this disc drive. Please, try a different brand of disc, or try burning at a slower speed. »

    Burn files fail with the message:

    "The disc can't be burned because the device failed to calibrate the power level of laser for this media."

    Any ideas on how to solve this problem would be appreciated.

    Reader SuperDrive material report:

    OPTIARC DVD RW AD - 5630 HAS:

    Firmware revision: 1CHQ

    Interconnection: USB

    Burn support: Yes (Apple shipping Drive)

    Cache: 2048 KB

    Read DVD: Yes

    Write: CD - R, - RW

    Write: DVD - R, -r DL, - RW, + R, + R DL, + RW

    Write strategies: CD - TAO, SAO - CD, CD - Raw, DVD - DAO

    Media:

    Type: DVD - R

    ID: CMC MAG AM3

    Vacuum: Yes

    Erasable: No.

    Replaceable: Yes

    Editable: Yes

    Write speed: 2 x, 4 x, 6 x, 8 x

    Try these in order to test your system after each see if it is back to normal:

    1. a. reset the PRAM and NVRAM on your Mac.

    b. Macs with Intel processors: reset of the controller (SMC) system management

    2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

    HD recovery start: restart the computer and after the buzzer, press on and press and hold the

    COMMAND and R keys until it appears the Utilities menu screen.

    3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

        When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

        back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

        ends, then quit disk utility and back to the main menu.

    4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

    Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.


  • HP ProBook 450 i5 - 4200M G1: SD card reader does not work after upgrade to Windows 10

    After upgrading my laptop HP ProBook 450 G1 i5 - 4200M Windows 7 Pro for Windows 10 Pro, Windows Explorer no longer displays the SD card reader.

    Also, if I connect the iPhone 6, it does not appear in Windows Explorer.

    On the other side, key USB perfect work.

    Please help me.

    Kind regards

    Guido

    Hi, Guido:

    The only suggestion I can offer on the card reader would be to try the driver W10 support page for your laptop if you have not already done so.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405424&swItemId=ob_150855_1&swEnvOid=4192

    As to why your phone is not appear, unfortunately I don't have any suggestions for this problem.

Maybe you are looking for

  • Slippage of Web site problem

    Hello We use EasyDNNsolutions Rotator for DotNetNuke. When the ratotor is horizontal sliding, the image on the right has half hight. After some time the image "plopp" at normal height. Works fine in the other browsers. Page Microsoft (XBOX.com) has t

  • Satellite A100 - battery life is increased from 100 min to 20 min after 1.5 years

    After 1.5 years, the battery life dropped about 100 minutes within 30 minutes. I thought that the battery was bad, but after that Windows automatically stopped because he thought that the battery was empty. I plugged the power cord for 10 seconds app

  • Menu question

    I have an application that presents a second context menu related when the user clicks on various points scroll wheel button. The code works perfectly on modern phones with one exception close. In a recent test, a user has complained that by clicking

  • How to manage a Windows 7 on a windows 2003 Server

    In windows 2003, I can right click computer who are eating and windows xp, the fines. It will not work on a windows 7. Any ideas?

  • AoE3 does not work on my Windows 7 computer

    AoE3 and the expansion of the WarCheifs used to work perfectly on my Windows 7 computer, but recently, when I try to run the game, it begins to run (Ocwa logo appears on the screen), but then Windows tells me that it was an error and the program must