Sharing network of Windows 7 64-bit problem: other machines may very well write, but the readings are extremely slow.

I tried to access to the shared both directory a Vista and XP machine via cable connections and wireless to my Win 7 64 bit machine on the part and it is extremely slow to read, but not written.  Not only the directory never takes show all thumbnails, and then open a file that is a couple mb in size as a photo takes more than a minute.  However, if I try to write the same file sharing, it takes only 5 seconds.  This fine all worked until I went from the version release candidate for the final version a few weeks ago.  Shared directories exist on another partition for the relocation does not have their effect.

Maybe it helps diagnose the problem... I just make a copy of a picture of 4 MB on the part of win 7 on my win xp desktop and it took about 1 minute.  I renamed the file on my desktop and tried to write to the share and it took 5 seconds .  Now, it's strange.  So, this is the bed that would take forever.  The Scriptures are fine, which also explains why my nightly backups on the part of win7 are very good.

I have a machine to hit the share by using the name of the computer and the other using the ip address.  Both show the same problem...

I also tried to access files using a mapped network drive.

I can take a 4 MB file and just copy it on my local desktop and it takes about a full minute.  However, written the same file or even another file of the same size as the part only takes about 5 seconds.

I ran the Windows 7 network troublshooter last night and used the troubleshooter for incoming connections and he says that it found a problem but that he could not fix and he really had nothing to help me.  But I think he sent the information in Microsoft... not sure.  Next time, I'm at home, I'll run again and try to put all the gross results that I could not understand in this thread.

I've also updated my driver for the network card and redone permissions and actions several times.  The only thing that I can also say that something can highlight, it is that when I was using the RC of windows 7, I don't have this problem at all.  It was my first installation of Windows 7.  I reinstalled from the final version and all of these files already exist on another partition on the same drive.  I just had to move my public and directories user space on the D: partition and share everything.  Maybe the new facility with something on the existing structures of the file works well with the new facility of the former?  But this does not explain why a new directory and file that create displays the same behavior.  I'm thinking out loud a bit to see if it helps that anyone think that anything...

I thought about it!

At least for me, it was a setting in the Advanced tab of the network adapter.  I have a Realtek Gigabit network card and one of the places must have been missed incorrectly.

I changed the 2 following settings to "disabled", and he immediately started working very well.

Disabled IPv4 Checksum Offload
People with disabilities large send Offload (IPv4)

I have a suspicion that among recent updates of Microsoft for this driver he missed bad... but it was this or the latest driver from Realtek.

Update:

In other research I have narrowed it down to make it just the Large Send Offload value.  Is located on "activated" whenever I update the driver Realtek to the latest version.  If I then go and set it to "Disabled", everything works fine.

Tags: Windows

Similar Questions

  • Installed Windows updates, very well. But the small text size button '100% ' in the bottom right of the status bar disappeared. Text is too small. Change on 'View' does nothing but change the size of the icons.

    No matter where I go - to Internet Explorer new; to my address e-mail. to Web sites - print is too small and I want my little back button so that I can do text 125% or 150%. I am 67 and it is simply too fine print. When the updates of Windows 7 - Home Edition installed automatically, he took my button for print size and I want to. By clicking on 'medium' or 'big' on the screen do absolutely nothing.  Thanks for any help.

    N ° EC was not helpful.  Finally, I did a 'system restore' and got back my '%' button and all my favorites on my browser.  (I hadn't lost my favorites but had to go through the 'Owner' or 'Computer' to access.

  • Activation with Adobe 8 Proffessional Windows 7 64 bit problem

    I installed Adobe Proffesional 8 on Windows 7 64 bit.

    I have a serial number, but I'm not able to activate the program.

    I get the error that the server could not be contacted. Internet is available and working.

    I tried activating by phone, but after inserting the serial number and the key I got Information, that telephone activation is not available.

    How can I activate my software, because the duration of the trial are only 30 days.

    Acrobat 8 is not compatible with Windows 7. This could cause the problem you encountered. I doubt that Adobe TS will be willing to offer you any support on that.

  • A single hard drive will not be shared on network. All other players share very well.

    A single hard drive will not be shared on network.  All other players share very well.  Don't have a homegroup installation because I also have XP machines.  The drive is on a windows machine 7.   I checked all the settings.  Of course, all the machines are on the same workgroup.  It's just 1 road.  The other 5 on this computer share very well.

    Hey Timmy,

    Welcome to the Microsoft Community and thanks for posting the question.

    According to the description, player does not network share.

    The problem may occur due to some network settings.

    Perform the steps from the link below and see if it helps.

    http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Hope this information helps.

    Answer to us if you are experiencing problems with the sharing network or any Windows problem, and we would be happy to help you.

    Good day!

  • In Windows 8, all my video files (is a mod and.) MOD) show a generic icon of MPEG and NOT a preview of the image. does anyone know a fix? All my photos preview very well but the videos are not.

    In Windows 8, all my video files (is a mod and.) MOD) show a generic icon of MPEG and NOT a preview of the image. does anyone know a fix? All my photos preview very well but the videos are not.

    I have the same problem with. Recording with my camera JVC Everio MOD files.

    The problem is that. MOD files. All thumbnails of film appears correctly.

    I have not had the problem on Windows 7, but my new 8.1 Windows based PC does not display thumbnails for previews. MOD files... but the other movie previews shows correctly. 'Show thumbnails instead of icons' is checked.

    Can anyone help?

  • I use developer preview windows in my acer aspire one netbook... a job well done, but the winstore apps don't work... and I do not see my bios settings also... helpme

    I use developer preview windows in my acer aspire one netbook... a job well done, but the winstore apps don't work... and I do not see my bios settings also... helpme

    Windows Developer Preview: OS General Questions:

    http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral/threads

    The Developer Preview of Windows is a pre-beta version of Windows 8 for developers. These downloads include beta software that may change without notice. The software is provided as is, and bear you the risk of using it. It may not be stable, work properly or work the way that the final version of the software will be. It should not be used in a production environment.

    Netbook screen

    If you have a netbook with a screen 1024 x 600 Metro applications will not work. 1024 x 768 is the minimum for Metro applications.

    Several people have reported that Metro apps can be run if you connect an external display that is 1024 x 768 or more.

    You can try this modification to allow higher resolutions:

    http://www.netbooklive.com/how-to-get-better-resolution-on-your-standard-10-inch-NetBook-2772/

    BIOS - disable hybrid startup:
    http://www.sizzledcore.com/2011/04/21/enable-disable-hybrid-boot-in-Windows-8-for-faster-startup-time/

  • When I select a sequence of five frame to render HDR in Lightroom it merges files in a preview very well. But when I click on the Merge option, the progress bar is obstruction of about 42% complete. I suspect a memory problem, so I spent a few hours Unite

    When I select a sequence of five frame to render HDR in Lightroom it merges files in a preview very well. But when I click on the Merge option, the progress bar is obstruction of about 42% complete. I suspect a memory problem, so I spent a few hours uninstalling a bunch of useless software on my laptop and still photography will not merge the HDR sequence. It worked once before, but now it does not work. Help!

    I just 8 GB of RAM and have been able to put together five separate images HDR images. I compared these files 5-image HDR with files - 2 and 3-image and see improvement very few (if any) using all five. Your results may vary, but you can try to reduce the number of images until you get your new laptop.

  • pattern buffer problem: "no ground has been set" alert but the layer is active. Please... What do I do?

    pattern buffer problem: "no ground has been set" alert but the layer is active. Please... What do I do?

    Try to reset the preferences keyboard or the manual way by reading this: to the area from the bottom.

    http://www.creativepro.com/article/Photoshop-tips-trashing-the-preferences-file

    Can bookmark this link too.

  • Satellite A200 (PSAE6E) - the performance of the network driver Windows 7 64 bit

    Hi all

    First of all, I wanted to make sure that the A200 is capable of running with windows 7 64 bit. It seems to me, if we can find the right drivers, it can be done.

    If anyone has the same A200 running with Windows 7 64 bit. Please do not hasitate to tell us what drivers you use, and where we can find them!

    I tried and tried, some drivers, but one more matter, driver LAN well it works, you can get internet and Yes YOA can address another pc on your network, BUT not the speed aspect cause you get about 200 to 800 KB/s with file transfer (copy a dvd takes forever). Who can tell me where to find the TOSHIBA 64 Bit drivers that will work without problem. Of course, I know some 64 bit Vista drivers (not all) work with Windows 7 64 bit!
    I use rather pure 64-bit Windows drivers especially the chipset drivers and Lan drivers as these are the most important.

    I discovered:
    Bluetooth works (exclamation mark in device just after freshly installed Windows 7 Manager)
    Infrared driver works
    Touchpad will work (but should be mentioned to install the touchpad drivers synaptics and Alyps)
    His work (by default, Windows 7)
    Driver Broadcom decoder (required = for the exclamation mark in the Device Manager, does not know that one), I don't know if it works in 64-bit!
    TI Flashmedia (for SD card reader) will work, but I don't specifically know what driver it was.
    LAN, well there are pilots, but Don't work correctly (speed issues, even with Windows 7 32 bit) someone at - it suggestions?

    I probbably have forgotten something, but change all the info as soon as everything works as it should on Windows 64.

    English is not my mother tongue so my choice of words and their spelling ;-) can be totally wrong! Be gentle with this Dutch ;-)

    friend Niels

    Hope that this subject led to info A200 can therefore be fully functional with every oft Windows 7 anyone having trouble with him!

    Hello

    Therefore, it seems that you have problems with the LAN driver... So have you ever tried the 64 bit Vista driver? And Yes, I read your ad and especially to get your opinion on the drivers from Vista to Windows 7 but that s not an explanation. That s only your personal feeling but I guess you never tried right? ;)
    So try it and post your result.

    An alternative, you can visit the Realtek page. There you can download the latest LAN driver you should be working.

    Check this box!

  • Print for Laserjet 1020 hosted by XP 32 bits over the network to Windows 7 64 bit

    I have a Laserjet 1020 USB, connected to a system running XP SP3. I need to print to it from a laptop running Windows 7 64-bit via my home network. Only driver Win 7 64 bit that I could find was for USB direct connect.

    Is there another combination of software that allow the ability to print network that I need?

    Follow these steps: on the machine Windows 7, download and run the Laserjet 1020 driver from here HP site.  When the installer comes to point of asking to connect through the USB port, and then click Cancel.

    Now go to the folder, devices and printers, add printer, a local printer, create a port, port Local, next, \\xpcomputer\printername (with the names of appropriate to share the printer and the computer XP sharing), then choose the Laserjet 1020.

  • OfficeJet Pro L7590 fails to install as a network under Windows 7 64-bit device

    I install the full feature software and driver for my Officejet Pro L7590.  I am running Windows 7 64 bit.  The printer is connected by ethernet through my network.  When I get to the step to add the printer as a device, I select it's a wire to it with an Ethernet network connection.  It is my printer and it's thanks to a wired connection.  He then began running diagnostics that appear successful.  It starts to install and is about 50% and fails with no explanation.  My choices are again (which produces the same result) or continuous (just out).

    I rebooted several times, turned the printer off and then under tension, but nothing seems to help.

    I can navigate to the administration page web printer and it seems fine.  I also have other computers on my network that do not have a problem, but they only use the base, not the full features software print driver.

    Have solved it with the HP chat service.  Try to add the device from the shortcut that was installed from the first unknown failure has not worked.  Had to use the full software download and add the device from there.  He acknowledged some conflict that he was able to fix.

  • Button Portege A600 - 133 Windows 7 64 bit problem

    After installing windows 7 64 bit on Portege A600-133, Toshiba or Toshiba Assist button a presenter button work. All other keys are working properly. How can I solve this problem?

    Hello

    Have you installed the latest VAP (value added package)?
    Toshiba page provides the last Win 7 VAP for A600 which is v1.2.40

    You use the latest version of the BIOS?
    Check it!

  • Toshiba Satelite a300 Windows 7 32 bit problem with music keys

    Hi, I just installed Windows 7 (32 bit) and I have a problem with the music keys. I can't find driver for it even on the toshiba official site. I had been looking in this and many other forums, but no answers have been good enough to solve my problem. "I've been to the installation of several ' for sure the work drivers" and nothing. It is with my Web camera - no driver. After I installed my touchpad began to be brighten up, but I still can't use the music BIOS update keys. I hope someone can help. Please :)

    Sorry for my English

    Install the Toshiba value added for the A300 (use the PVAT Win7, not the PVAT Vista).

    This site of Toshiba: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download

  • ram Windows 7 64 bit problems

    I have windows 7 64 bit with a PNY Nvidia GT630, Intel Pentuim D 3.2 Ghz I recently upgraded from 32 bits that I had the same problem on. I have 2 x 4 GB ram sticks and 1x2gb 1x1gb. I've been running the 1x1gb and 1x2gb ram sticks very well for the last year or two. I bought the 2 x 4 GB ram sticks online and they have the same specifications as the ones I installed. When I installed the RAM sticks 4 gb bobbin fans up faster that normal and the motherboard beeps for a second to two seconds. No matter what I always did beep with the 4 GB installed ram sticks. Record: Operating System Windows 7 Home Premium 64 - bit SP1, processor Intel Pentium D 940 Presler 65nm technology, RAM 3.00 GB Single - Channel DDR2 at 266 MHz (4-4-4-12), motherboard ASUSTek Computer Inc. EMERY2 (Socket 775), graphics HF207 (1600x900@60Hz) 2047 MB NVIDIA GeForce GT 630 (PNY), 232 GB Seagate ST3250824AS (SATA) 232 GB Seagate ST3250824A storage

    Motherboard
    Reference of the manufacturer ASUSTek Computer Inc.
    Model EMERY2 (Socket 775)
    Version 0ny1114RE101EMER200
    Intel chipset provider
    Model of i945P chipset
    Chipset revision A1
    Southbridge Intel supplier
    Southbridge 82801GB (ICH7/R) model
    Southbridge revision A1
    System of temperature 40 ° C
    BIOS
    Mark Phoenix Technologies, LTD
    Version 3.19
    Day 08/12/2006

    Obviously, the 4 Gig sticks are somewhat different.  RAM is VERY picky.  Even if they have the same latency but another manufacturer they can cause problems as you see

  • Driver HP Business Inkjet 2800 Windows 7 64 bit problem

    Hello

    I've recently updated my PC to windows 7 (64-bit). After that I have a face issue, I don't get running windows 7 64 bit HP Business Inkjet 2800 printer driver. Please help me if anyone with complete operational driver.

    Black only option is off in my printer. I need to activate this option. Please help me anyone know of any solution.

    Hello

    You get the drivers for your printer directly from HP

    Uninstall and reinstall your printer using the right drivers and installation on the HP Web site information.

    And there are some troubleshooting steps for her there too.

    Or you can also ask in the Forums of HP's Support.

    http://h30434.www3.HP.com/PSG/

    @@@@@@@@@@@@@@@@@@@@@@@

    This can also help you:

    "Solve printer problems.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    "Solve printer problems.

    In the upper right corner, select your operating system from the menu drop-down.

    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    See you soon.

Maybe you are looking for