sharing of the locks between different sequences

The way my main seq is set up is does nothing by itself, just calls to other sequences (call them seq1, seq2, etc.).  I now want to have two DUT using the parallel model but, given that I only have a multimeter, wanted to use the locks.   A DUT in seq2, for example, will recognize a lock that has been implemented in seq1?

All sequences use the DMM in a way or another. The reason why I want to use locks on the main sequence is that there are things inside the individual calls (writing series, expectations, etc.) that I have no problem to do in parallel, because in these cases, I have more than one piece of hardware.

Thus, for example, when UUT1 is measuring the current in seq2, UUT2 is read/write diagnostic through its own serial port in seq 1. After that UUT1 frees the dmm, UUT2 gets access.

In addition, the calls must be in order (end the seq1 seq2) for each object to be measured.

If you start a name of lock with an asterisk (*), then it is going global at the station.  For example "* DMM" as the name of your lock will be shared throughout the station.

Tags: NI Software

Similar Questions

  • How to put the lock in parallel sequences?

    Hi all

    I'm writing a testseq, which has two parallel sequences. In the two sequences (threads) a same LabVIEW program (Vi) as an Action step will be called. Since the Vi uses an IP address, so it cannot be run more than once at the same time. So I want to make a setting (Lock) like to Teststand.

    is it possible to use the setting lock (How) to allow the as step Vi, which runs once at a time.

    Any response will be appreciated!

    The easiest way, if you want to lock on a per stage basis, is to use the lock on stage settings. See the sync section of the settings on the step step settings panel. You can use the same name of locking with several steps in to do use the same lock. If you want to lock around several steps, use the type of synchronization lock step.

    Hope this helps,


  • How to disable the synchronization between different computers of Favorites?

    Original title: break the link of the Favorites between computers

    Can someone explain how to break the automatic update of my favorites on two computers that I want not linked?  There is no reason to have my office appear favorite on my computer at home, but they have to do, since I shared the same Microsoft account.  I guess I could have created an extra account when I signed up at home - simple then, but it begs the question why we should not have control over this kind of options and burglary in the bond measure.  Can anyone help?

    Hi Mark,

    You may have to activate for the synchronization of the Favorites. See the following link, which allows you to disable the synchronization of favourites. You can disable/turn off the Favorites of synchronization.

    Sync between multiple PCs with OneDrive settings.

    Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  • How to share data in the applications between different accounts of microsoft on the same PC

    Hi, I had been using windows 8 for over a month and that you have installed a * a lot of apps on the store. Now, I have to create a separate account from microsoft on the same PC. After having created, I find no way to use apps from windows of the older account store. And, certainly, I don't want to re-download applications for use on the new account. Is there a way to share data between different accounts on the same PC selected app? Thanks in advance, Praveen.

    Hi Samuel,.

    This is a free support. However, let me provide you with assistance on the issue of not being able to use the MS Office product on different user accounts. See the articles that describe how an application installed as MS Office can be used on another user account:

    Find and start Office applications in Windows 8 or Windows RT

    Also, for your further reference:

    Application does not appear on the start screen after the passage to another user

    I hope this helps. If you need additional help, then just reply back. Also, if you are faced with other problems related to Windows, it would be better to start a new thread of your own instead of posting in the thread on the other so that the new thread is no longer visible to the community.

  • change the space between different paragraphs. but not between para even. Tags

    I wonder if there is some sort of growing space between a bullet tag and tag bodytext, keeping the space between the 2 balls unaltered. Other programs have been a long time but I can not understand how do in CS4.

    Thank you


    N ° for the space around lists, make three models: bulletbegin, bulletmiddle, bulletend. The first style must have extra space above, the last style must have extra space below.

    I've always wanted a characteristic of the interaction style like the one you describe, and I used to love the spacing to Ventura, who collapsed additional space contiguous to the highest number (if a paragraph has 6 points after the next paragraph has 3 pts before, Ventura gives you 6 points after), but I've never seen a program that would allow the space with some style interactions. What are the programs "have done this for years?

    Ken Benson

  • Composer is the sharing of the replicas between pools?

    We have a customer who has two pools of office.

    Each pool is based on the same VM and the snapshot even.  The office pool settings are different.

    We noticed that vCenter has only 1 line.  The second pool is using the replica of the first pool.  Is this normal?  I've never seen this problem before.

    I always saw a line separated by the pool of office by the data store.

    The problem is that when the re-composition of the second pool, it will fail with 'a digest operation failed.  Which would make since the digest acceleration enabled.

    Simply by reactivating provision allows him to continue but its weird.  Deletion and recreation of the pool did not help either.

    This view 6.2 and vCenter/ESXi 6.0


    This is normal behavior if the pools use the same store of replica data and snapshot.   It has been like that for a while.

  • What is the differeaces between .wav, .mp3

    I would like to know the difference between different extensions in the forms of music. I want more songs to people by e-mail. The mp3 seems quick email as .wav. How can I send faster songs by e-mail? I don't have a compression software.

    I would like to know the difference between different extensions in the forms of music. I want more songs to people by e-mail. The mp3 seems quick email as .wav. How can I send faster songs by e-mail? I don't have a compression software.

    MP3 files would probably be your best bet and they have already been compressed
    If compression (compression) would not make much difference.

    The following items may be worth a trip to compare formats.

    What is the difference between the Types of Audio files?

    Popular Digital Audio formats

    John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Sharing typedefs and screws between two different targets in the same project


    I am writing a distributed application that runs on a PC and a CompactRIO. There are a few data structures and functions of comfort (typedefs and screws) I want to share between them. What is the best way to do? A LVLIB is suited for this purpose?

    I currently somewhat anime items shared on the 'My Computer' target. However, when I change my code, I sometimes click on "synchronize with other instances of the application. In addition, the shared items appear on my cRIO target dependencies list. I prefer not to have this happen. is it possible to avoid these?

    Thank you!

    Actually, I just discovered I can "include explicitly" the same control/VI in different targets, and LabVIEW will not see it as a conflict.

  • What is the difference between sharing and family home page?

    Yesterday I bought a new iMac. I discovered that I had 5 authorized computers when I tried to configure it. I found myself meet my MacBook Pro, which I will give my child once I'm done transferring data, in order to allow the new Mac.

    How can I find out what other Mac my ID Apple is on? Is there another way out remove all to clear the computers I no longer use? What is the difference between the home sharing and family shares anyway?

    Thank you


    Home sharing allows another iTunes (on another computer) to access your library.  If we could watch a movie from your desk at home on your laptop at home.

    All devices must be signed on the same identifier Apple to use the function.

    Family sharing allows different apple ID (family members) to share purchased content.

  • I followed the instructions to set up the home between my Mac and iPhone sharing 6, but I don't understand all the music on my iPhone

    I followed the instructions to set up the home between my Mac and iPhone sharing 6, but I don't understand all the music on my iPhone

    I have confirmed:

    (1) devices are on the same network

    (2) I am connected to my AppleID with the same account

    3) are my OS up to date (Mac 10.11.2) (9.2 iPhone)
    (3) I closed iTunes and the App has reopened

    (4) I turned my iPhone off and rebooted (and confirms the foregoing)

    On my iPhone, I see in my music library, different ' kind' listed (e.g., classic, recently added, music of the 1990s, etc.) but they are all empty.

    Im hoping to see the music I have in iTunes on my Mac and play these songs on my iPhone.

    IM thinking, music that would be shared from my computer to my phone will be on the cloud?

    (I did not all default to add my music in the cloud at the moment).

    Post edited by: abbeyinor

    Did you go into settings > music on your phone and sign in home sharing?

    See you soon,.


  • Difference between different models (sold in different regions) of the iPhone 7

    I'm traveling to the Japan, and it turns out that my phone broke. So, I plan to buy iPhone 7. But I noticed that there are different models according to the countries or regions. According to Apple customer service, it has to do with different bands of LTE in different regions. But exactly the same bands that WE supported the Japanese model (which is completely separate from all other) / version of the EU with the exception of it's CDMA.  She would work very well after my return to Europe (Germany)? Where can I buy non-CDMA, GSM version for the Japan as well.

    Here is the link showing the differences between the various models of iPhone 7.

    You have a question?

  • How do I sync and import/export bookmarks between different users on the same computer and two using the Firefox browser?

    All the help instructions are to import and export bookmarks bookmarks between different brands of browsers.

    Assuming that each of these different users use a different profile of Firefox. You can use the built in Fx4 Sync feature. Click on Setup Sync in the menu selections, create an account and then have each user created their profile to use this new account synchronization. It syncs more bookmarks; things like history, passwords, etc. So if it's only the bookmarks you are concerned with that, use customize only synchronize bookmarks when you set up each user. Good luck and have fun in sync.

  • sequence Analyzer: data transfer between the Analyzer rule one sequence to another

    Is there a way by which I can send data to the Analyzer rule a sequence to another.

    I've created rules to count the number of SCOPE, step REQUIREMENT TEXT step, step in the PROCESS

    Now, I want to create another regulation that reads the values of each of these rules


    One of my colleagues brought a different, probably better idea to my attention this morning:

    Use the AnalysisContext.GetRuleAnalysisData method to access the data of other rule analysis:


  • What is the difference between files? examples; PDF, http, wps. Why is there a manyand then why do you need different programs to open?

    Original title: files

    What is the difference between files? examples; PDF, http, wps. Why is there a manyand then why do you need different programs to open?

    On Tuesday, February 7, 2012 16:28:19 + 0000, RonaldMatte wrote:

    What is the difference between files? examples; PDF, http, wps. Why is there a manyand then why do you need different programs to open?

    Each file type is in a different format.  The formats are different
    essentially for two reasons:

    1. the files contain any other type of information. For
    example, an mp3 file contains a music and a xls file contains a
    worksheet. The music and spreadsheets are very different things and one
    a unique type of guy would not work for both.

    2. There is also the example of the types of files that are very different, even
    Although basically they both contain the same type of data. For example,.
    a doc file is a file created by Microsoft Word processor (or
    some compatible programs) and a wpd file is a text file
    created by WordPerfect. This is because Word and WordPerfect are two
    very different programs, with very different characteristics. Designers
    and authors of each of the programs designed for a type of file that would be
    works very well with their program.

    Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
    Please reply to the newsgroup

  • How can disable switch between different input languages (= keyboard languages) by pressing the Alt + Shift keys? __

    Although I can now perform steps

    1. On the start menu, choose Control Panel.

    2. In Control Panel, select regional and Language Options.

    3. In the Regional And Language Options dialog box tab, under Text Services and input languages, click details.

    4. In the text Services and input, in the Preferences section languages, dialog box click on the key parameters.

    5. In the dialog box advanced key settings, click Change Key Sequence.

    6. In the change Key Sequence dialog box, clear the switch input languages check box, and click OK.

    7. In the advanced key settings dialog box, click OK.

    8. In the text Services and input languages dialog box, click OK.

    9. In the Regional And Language Options dialog box, click OK.

      But I need some settings registry keys to do the trick above to me, because it is difficult to do it on the number of PCs that requires users to restrict the swith between input languages.
      No idea or help is greatly appreciated.

      Thank you in advance.

    I found the place where exactly this may be small :).

    [HKEY_CURRENT_USER\Keyboard Layout\Toggle]
    "Hotkey" = "1".
    'Language Hotkey' = '3 '.
    'Shortcut page layout' = '2 '.

    Change the value of "Language Hotkey" accordingly.

    1 sequence of button enabled; Use Left ALT + SHIFT to switch between locales.
    2 key activated sequence; Use CTRL + SHIFT to switch between locales.
    3 invalid key sequences.
    4 If the default locale is Thai, the grave accent key activates / deactivates the input locale. otherwise the keystrokes are disabled.

    Another problem is that it sits under HKCU as well, same as if I pack this setting with MSI, it won't have a any use to me. Since then, installation is done using MSI localadmin account and HKCU is associated with the current session. If a new user who connects to this settting does not apply, and even if it rises "access denied" :(

    Hope this helps anyone with the same problem.
    Thank you.

Maybe you are looking for

  • Adware? And how to get rid of?

    Since last week when I'm redirected to a game at random navigation site. First of all, I thought it was just something to do with Firefox (the browser I used), but then the same thing happened with other browsers too. I then installed Opera to judge

  • "Add a family member" option grayed out

    I want my husband to have its own apple - ID we always shared one, but it becomes very problematic. Initially, I had all 5 of our children on the sharing of the family.  When I discovered that I couldn't add my husband because of the limit of six peo

  • problems with internal links Amazon... Safari not responding

    I installed El Capitan... Safari opens fine but when I go to Amazon and go to a link, it goes to this page and it freezes... I have reloaded the OS and still have questions... java script to audit of the United Nations security without success... UN-

  • How to reset the password forgotten on external HARD drive

    Hello I forgot the password of my external hard drive.How can I reset this? It has all my photos out there I want to come back.

  • How to reinstall 3.6.3?

    I uninstalled 3.6.4 when all my favorites and links come up with page cannot be found, even though even the URL are correct. I want 3.6.3 back! This has happened Each time Firefox opened Auto upgrade 3.6.4 User Agent Mozilla/4.0 (compatible; MSIE 7.0