Sharing of variable in window 7
I have a project to Labview 8.6.1 with a lvlib of 9 shared variable, which are some of the simple basic variables (String, Boolean), but some are of type complex def.
Project works to the original design of LV 8.6.1.
I opened in LV 11 SP1f1 and shared variables were not recognized. I added the again. I had bad time see variables for the project and when I had to add the last one everything is ok no problem, I save screws and project project then when I opened to new and high level vi and then complain that the last variable is not part of the project. I added it again, I save again once all the screws are ok, but next time, when I open the project I got the error of the variable not being not part of the project.
Is something that I'm missing or what I'm doing wrong? See attached my variable in project.
Thank you
Virginia
I again, it's a bug on the top of my head, but after a search, I found a reference here(see 40906). It was a bug reported in LV8.5. I'll inform R & D on this event because it was supposed to be fixed a long time ago.
Tags: NI Software
Similar Questions
-
DSC - event trigger for single shared process Variables
Hello
I understand how to set up a Notification of change of value for published network Variables shared so that an event fires when this particular shared Variable changes. However, I can't understand how to do the same for the single shared process Variables. Is it still possible? Can someone shed light on this point, please?
Thanks in advance.
-James Pham
VRspace4,
Hello! It is not possible to activate alarming for unique shared process Variables. A workaround to set up a Notification of change of value would be to create a network shared variable that reads in your Variable single process, but at this point in time, it could be useful that replace your variable with a variable that is shared on a network.
-
Sharing of Variable crashing LabVIEW
It's just one of those projects that has a wall of brick in each round so far. Two computers running LV2009. Computer A hosted data write sharing Variable. Computer B shared reading Variable data hosts. Reading data is linked to write data. Everything worked fine, and then yesterday afternoon, I don't think I changed anything on the shared variable, I start my VI on the computer B and LV crashes. The VI begins to run before the first performance for reading data, and then poof, everything open in LV disappears. Since then the problem is reproducible 100 percent.
Here's what I know:
1. an error indicator hooked to reading data watch-1950679034 (shared Variable has no value) for about a second before the accident. Everything stops execution as soon as the warning.
2. writing of data is a single editor, but it is also sometimes read in VI it is written in. It is not read when the accident occurred. I can however perform playback on computer A without incident.
3. don't know if this is related, but if I open the VI on computer B and then open the project, I am not able to drag data reading of the project on the block diagram. I also cannot perform operations on the shared Variable (as right-clicking, ignore the timestamp). I have to close the VI and reopen the project. In retrospect, this problem might have started when I opened the VI without opening the project.
I'm torn between abandoning the shared Variables and try to understand it. I would definetely prefer to use the Variable shared, mainly because I need a buffering. I guess I can put other things buffer. Don't know if I can remote access to a queue, or...?
I was able to reproduce the crash that you see with extreme simplicity VI in LabVIEW 2009. This looks like a bug in LabVIEW, so I'll check if there is any of this behavior already.
-
I can access shared folders from a Windows Server 2008, but I am not able to access the shared drives (C$, D$). After entering my credentials, the system guard invites me for my credentials again and again. Any idea what can cause this?
Appreciate the help
Thanks.l
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/
-
I'm not able to add a shared printer on a Windows XP client computer.
original title: network printers
I'm not able to add a shared printer on a Windows XP client. One, printers
Canon MP830 and an Okidata 320 are installed locally on a Windows 2003 Print
Server. Both are on the same domain. I also have Windows XP, 7, Vista and Linux
machines on the same network. They are all able to print. The only one who does
not working is a Windows XP client. This machine has also win 7, Vista installed
on different hard drives. they are able to print to shared printers. I have
cammot access to a printer by using the UNC path. I can see the shared
printers in Favorites network but I can not connect. If I use the add printer
Wizard to add a network printer, the printer appear in the book: but
Yet once, they will not connect the error message I get is:
"Unable to add the printer connection. Either the typed wsa printer name
incorrctly, or the specified printer has lost its connection to the server. »
I checked the permissions for the priners and I am logged in as one
administrator when I try to add the printer. I also checked the group policy and
everything seems to be oK. I also deleted and added the printer to the
Server, that I managed to install them as local printers on the affected XP machine
using the \\server_name\printer_share_name port. The priner name and the
share name are the same for each printer. They have all worked last week that
network printers. I'm curious to know what is causing this weird behavior. Any
help would be greatly appreciated.
Thank you
John
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
Hope that helps.
-
reconnect the stall network of shared network variables
I have a cRIO unit communicates with a laptop using shared network Variables, one of them being a table of 21 index which is buffered.
The system connects and communicates very well, but sometimes the wireless laptop card is to lose the signal from the WAP, attached to the cRIO.
In this case the network never shared Variables "reconnect" and start to receive values still once the wireless link is restored. Is this expected behavior?
When I tried to use other WAP industry instead of the card laptop wireless, I get no abandonment.
Hello Ryan,
Please contact National Instruments! I looked into the problem you are having and I wanted to ask you a few questions more. First of all, you have a period of time which allows the reconnection? I believe that the Shared Variables should find the connection after a short period, but it may not be a very quick process. It may take a few minutes to the Variables shared to reconnect.
The other thing that could happen is if you have error son being passed by shared Variables, it is possible that the error is not be deleted, and so he will always see the error and not a so never reconnect. In this case, you will need to filter this error and then clear the error in order to use again shared variables.
If you have more specific information about your program that can help us to determine the reason for this behavior. As a screenshot of your code would be useful. Please let me know if you have any other questions and I'll be happy to help you. I hope this helps!
-
can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing network not found path.
After restarting pc for awhile, we can access shared folder & printer but after 30 minutes (more or less) again cannot access. In the printer folder connected printer displays status as long as it is impossible to connect to the win-2003 server. Please help me out of this problem because I support banking sector.
Hello
You can find the Server forums on TechNet support, please create a new post at the following link:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
Hello
I have two Windows machines on a private working group, old stamp. A XP 32-bit, and a 64-bit Windows 7. The Windows 7 machine has a Canon printer attached. The problem is how to give the ability to print to the shared printer on the Windows 7 machine to a user on the XP machine.
After a day of p____g about, I managed to get the feel of XP machine for the shared printer when I'm logged on two machines. But there is a problem.
When my wife connects to the XP computer (instead of me), it can not print. His account apparently can 'See' the printer and everything seems to be in order when I discover the properties of the printer, but when it prints, it fails silently. There is no error; printing seems fine, but nothing happens. This happens if I print from Word, Notepad, or even simply the test page in the printer properties.
I have another printer shared from the Windows 7 machine, and it can print on it without problem.
The big problem is that I can't follow the 'normal' procedure to add a printer to the XP computer because it tries to install the drivers and then machine claims Windows 7 is not the correct drivers. This is true because the Canon Setup is fully automated and does not provide an option to install the 32-bit drivers alongside 64-bit drivers, so that customers can download.
Sorry for the length of this post, but I am here in desperation. I lost count of the number of Web sites, I've been to, who claims to have an answer to this problem, to see any of the steps fail. Many solutions rely on the use of residential groups, which I can't do because XP does not know these (I don't think).
Any help would be much appreciated.
Kind wishes, Patrick
Check permissions to print on the XP machine (Fortunately, you have XP Pro):
- Disable Simple file so sharing is not off (in Windows Explorer > tools > Folder Options > view tab > uncheck "Use Simple file sharing" - low point in the list--> OK your way out)
- Start > printers and faxes
- Right click on the printer icon and select Properties
- Select the Security tab
You can see who has permissions to the printer. By default, the "Everyone" group has 'print' permission but none of the other permissions related to printing. If you want to add a group or an individual user, click the ' Add ' button. See the following for more information: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/print_limit_accessw.mspx?mfr=true and the topics listed at the bottom of this page.
To determine if a user is in a group (for example, is the user who cannot print a member of the "Everyone" group), click Start, right-click my computer and select manage.
In the management console of the computer that opens, select "Local users and groups." By double-clicking a user, you can select the "Member" tab and see what groups that user is a member. Similarly, by double-clicking a group, you can see the members of this group.
-
Apple TV home sharing does not (10 Windows, iTunes 12.4.1.6)
I have two 3rd generation Apple TV in my house and home sharing used to work perfectly on it when the contents of the copy of iTunes on my desktop Windows 10 streaming. But since than do a clean install of Windows 10 that has not worked.
I search online for the solution and have tried everything... but nothing works.
It is not the firewall on the computer or the router by turning off both makes no difference
Running iTunes in mode of different compatibility does not help
Change the name of computers do not do...
Someone at - it any other ideas?
AirPlay works perfectly, it's just the sharing House that doesn't.
Thanks in advance
For home sharing work, ATV and iTunes must be on the same Apple ID This does affect airtime. Check the ID on your iTunes. You can find information here for help with home - sharing Apple support. Moreover, the firewall of the router, which focuses on internet traffic has nothing to do with it. The Windows Firewall must open certain ports to allow communication between different machines.
-
Sharing network Variable not in Distributed System Manager
I have experience with LocalHost. I have 2 computers A, B. A, I can read a created/static SNV of B. However, I need to use a SNV on A to A (I don't know why, I inherited this project and it is not at all commented). So I create and I see it on my drive D:\\. However, when I go to NI DIstributed System Manager, there are no library under localhost. So I write in a VI and call it in another, and I get "DataSocketRead in VI" with the code 56. Don't know why I can't have it is the Manager.
I have attached ahev the library in case something wrong here.
Have you deployed and right click the shared variable library?
If it's an executable in the bulder properties you should check to deploy shared variables.
-
Sharing of Variable error-1950679023 in LabVIEW 8.6.1
Hello
Is anyone else having problems with this error after installing LabVIEW 8.6.1?
Programs using variables shared that I wrote (and worked), just in older versions don't seem to work.
Kind regards
Sarah
Hi Sarah,.
Good afternoon and I hope that your well today.
Sorry for the delay...
I've did some more research and found that there is a patch for LabVIEW 8.6.1 and variable - could this be the cause of your faceing...
Link: http://joule.ni.com/nidu/cds/view/p/lang/en/id/1255
"This is an update to only LabVIEW 8.6.1 solve a problem when the variable path related is incorrect after variable deployment."
You don't seem to have proved the issue about outside of your code - I go to the update being installed and not the goal of the solution to reproduce your problem.
Finally, please run - but do not uninstall! the attached MSIBlast tool. It will list all the packages OR (Packages MSI) installed on the machine. Please note that the list should include,
Client Variable nor to RT + versions Supprt
Support for versions + OR motor Variable
Variable Manager OR
... to name a few.
I would be interested to know if they appear in the list,
Hope this helps,
-
Shared speed variable notification - separation of GUI
Hello
I am developing a LabView application that relies heavily on shared variables to separate the logic of basic software graphic user interface. Some variables are used as triggers, which means they are Boolean values that are controlled by the side Server (core application) for the 'true '. If located, they are reset to false and some actions are executed (as queue a message to a queue internal).
The attached picture shows a situation where the Boolean trigger control is carried out in a loop. Now, what I've found, is that the same message gets queued several times. The OAS 'Save thermal Calibration' is read in the loop, to false and read in the next iteration of the loop. But apparently, the OAS server is too slow to notify the accessor on the value changed before the next iteration of the loop.
I met similar behavior on some other posts in the code and until now solved by adding a 'Wait (ms)' for about 200 m, but this feels pretty ugly and I wonder if it could break if at some point the load on the app and the SV server becomes even slower.
Also, I wonder if there is a way to speed up communication server SV, especially when writing values and inform other accessors of OAS on the changes.
Published static Variables in the network are slow. There is no real way around it. And, Yes, when you enter a value, this value is really in the variable until the NSV Server manages it. And when the value actually gets sent to the server can be on the order of 100 ms.
If you talk to another computer, I recommend that you change using a network flow or TCP/IP. This way you have actual messages, ordering the server what to do.
-
Sharing of Variables does not not under an FPGA interface?
Hi all
I have a controller 9074 cRIO 9074 chassis.
I defined a number of variables shared under my RIO controller and writing a UI VI in my host PC, where I feed some variables of network shared in RIO and get another return to RIO on the front panel of my host. Naturally, the VI which deals with read/write variable network data to IO channels real is under my RIO controller.
The problem is that, although everything seems to work fine when my RIO is set to the interface of the Scan Engine, the same screws give the following error message when I pass my RIO FPGA interface dependent.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Possible reasons:
CompactRIO: (Hex 0xFFFF0000) unable to communicate with the module. Re-insert the module and check the connections. If the chassis is in Interface FPGA programming mode, make sure that you have opened a FPGA reference bitfile or VI FPGA with the load of the Interface of scanning for the module you are trying to access using the scanning Interface.
This error or warning occurred when writing the following shared Variable:
\\AMR-cRIO9074\B1-DO\JCV1_C1_B1
\\160.40.15.231\B1-DO\JCV1_C1_B1-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note that I get this error message for each channel of e/s that I call my RIO. Also note that it is there still no reference FPGA currently in any of the screws... I want to solve the problem is because later, I'll have to add some FPGA in my code, so I can not just impersonating my RIO scan interface...
Any help would be appreciated,
Harry
When you disable scanning on the cRIO platform engine, you must have some runing FPGA code.
There is noway that knows your controller on any module, and he can't read anything from any module.
If you do not have an FPGA vi, which sends the values of a port of the module on your controller, you need to do active Scan Engine.
The error message clearly indicate that you must have an open reference FPGA vi or analytical engine to be able to read the values of and to a module.
You are able to have custom analysis engine and a footstool of FPGA code at the same time on an FPGA.
Is there a reason you do not run with the scanning engine?
-
Hello all, I have two projects (one is 64 bit LV, the other is in 32 bit LV) I run by-side on the same machine. The 64-bit project control a camera, and the 32-bit calls code to perform processing. I would like to send a trigger to make the 64-bit program wait until some of the raw data buffers are processed before sending more data for the 32-bit project. Unfortuantely cannot recomplie the code for 64-bit processing.
Is there a good examplse to do? I was thinking about using some kind of shared variable configuration, but I don't really like shared variables.
Thank you
You can send commands via tcp/ip for different processes, e.g.
Shared variable network is probably a little easier, but not much.
/Y
-
Why is there no media sharing tab in my windows media player Library tab
When I select the Library tab, it there is no media sharing tab and when I go to the library options tab confi.sharing is black gray not why is this and how to fix this
Hello
Click Start, in run type services.msc, and then press ENTER. Check whether the Windows Media Player Network Sharing service is activated. Also, try to disable the firewall temporarily and check.
Good luck..!
Maybe you are looking for
-
Why am I not able to change my numbers spreadsheet.
I have a spreadsheet of numbers that I want to update. When I click on a cell, to change its content, nothing happens. No cursor appears and nothing that I won't allow me to change it. It is not locked, so no one knows what could happen?
-
HP deskjet 3630: HP Deskjet 3630 works only with MS word or excel
I bought an HP deskjet printer 3630 recently, I followed the online instructions to download the latest drivers. It can print stuff with chrome, but not with word, excel and ppt. I connected the USB printer. There is no error message. I see the print
-
I have professional window XP and I said that my product key is not good.
original title: I have window XP Professional And it keeps telling me that I can't use my product key its not good. Please I need help the code is * removed product key * I just got this new of ebay thanks
-
Received a promotional copy of Vista Ultimate at the launch of 'Heroes' 2007. Want to install it on the new PC, but the url for retrieving product key no longer works. How can I get the key?
-
Original title - Vista sp2 64-bit windows program update is not running When I open the program "Windows Update", it has an "X" in a red shield symbol. When I click on the tab "Check for updates", I instantly get a message that says: "the Windows Up