She launched 'System Restore' now the computer will not complete the installation

Similar Questions

• You had to do a system restore, now my windows will not update

  I had problems with the 10 of Windows Update causing a blue error screen permanently.  I tried to do a "reboot of the PC" to correct the error and it would not be completed even when left for 2 days.  I finally had to restart my computer and press f8 to not get stuck in the Windows Update screen.  With no system and no other available option, it was suggested to me to do a restore of complete factory restore points.

  I did the restore and now I have even more questions.  My windows update does not work, I update of windows troubleshooting, but it does not work and my computer says always "looking for updates" and updates are never downloaded.

  My fan is running continuously since I did the restore to factory, and my CPU usage is 75 to 90%, even if I did not open any programs.  Norton told me that Microsoft is responsible for the high CPU usage, but I don't know what to do about it, because I obviously don't want to disable Microsoft.  I'm not sure how to upgrade my Windows at 10, or if I'm still able to now...  Which sucks since I had to do due to the problems caused by Windows 10 programming initially.

  Another update of the issues, I got zero problem with a feature of my computer before resetting.  Any help you could give me would be greatly appreciated.

  My computer is a HP Pavilion g7-1320dx laptop, and bought in 2011.  Please don't tell me to get a new computer... It's definitely a software problem.

  Windows 7 update problems? First read this.

  :)

• I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

  Help with my computer of dumping

  I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

  If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

• Problem trying to launch system restore error "the creation of a shadow copy has expired. Try this operation again. "

  The creation of a shadow copy has expired. Try this operation again.  That's what I get when you try to run the system restore.  What can I do?

  (Moved to programs)

  Solved my problem by running the restore of the system in safe mode.  This problem was caused by a Microsoft update that plays well with Windows 7 - it put an end to all parts of Windows troubleshooting and caused this problem of system restore.  I suspect that it also created some havoc with Silverlight too.  So, before launching system restore I changed the way I let Microsoft give me updates - now they can download, but not unless I let them.  Of course, I have absolutely no way of knowing what updates to install and which not to install, I think that I will not install anything unless I 'hear' some chitter-chatter on the net something.

• "System Restore" on my computer does not work. Also, I can't create a (error 0 x 80042308)

  I am not able to restore my computer to an earlier stage. The system responds that "no restore points created". Also, I am not able to create a (restore point) since the responses of the system "error 0 x 80042308).

  Thank you very much.

  Well, looks like we found the problem.

  The hard drive is a failure. You need to replace the hard drive and reinstall the operating system using HP recovery support.

  You can continue to use it as - is now, but it will continue to get slower and experience of mistakes random until it just don't dΘmarre yet.

  In any case, I recommend back you up important data (photos, documents, etc.) so that you don't lose.

• Installation: Windows Vista Service Pack 2... Now my computer will not boot

  After you install SP2, my computer starts is no longer.

  When I turn it on, it brings me to a black screen where I can choose to start windows normally or let windows search for a solution to the problem. I tried both - NOTHING WORKS.

  I tried to restore my computer to an earlier date, let windows search for a solution, everything you can possibly do on the options list. Whenever I have let windows start normally, it brings me to a black screen that says "!" 0 x 0000034! "177/76190 (_0000000000000000.cdf - ms).

  I am extremely frustrated. It seems that Microsoft has ruined my computer. Looks like I'm about to become a defender-apple... Unless this issue is resolved as soon as possible.

  Have you tried the system restore, without success.

  See if that will fix your problem:

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Above information shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve your problem:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help for your problem here.

  See you soon.

  Mick Murphy - Microsoft partner

• Update Service Pack 2 is not installed, now my computer will not boot

  Hello. I recently tried to install the service pack 2 update on my computer. It did not installed. My computer is slow, so I tried restarting. It came with the screen that shows the updates are being installed. I kept the computer until it stops. When I turned it back on it would go to this same screen but with a message saying that the service pack was not installed correctly and that the computer is reverting changes. It will turn on / off power permanently. In an attempt to fix it, I managed to get in the log on screen and put in my password, but the minute I hit enter my computer started and closed the loop on endless. Anyone know what I can do?

  http://support.Microsoft.com/kb/949358/en-AU

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  The above lists some options including restoration/repair of the etc system.

• My computer will not complete the update

  I've updated my computer tonight and after the reboot. Until I can connect the "configuration of updates: stage 3 of 3" came, as usual, but this time he remained at 0% for a few seconds and then the computer restarted again. It always restarted it self shot 10 times until I forced to close. Cannot start without failure or something.

  
  

  What should I do?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If above does not solve the problem:
  

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I accidentally hit start diagnosis when I was in msconfig and now my computer will not go back to a normal startup

  I tried to close some startup programs in msconfig and key to start diagnosis and now my computer don't return to normal startup,

  Try this:

  Start | Run | Msconfig | OK | Law tab

  Select Normal startup

  Click on apply and OK.

  Reset.

  For later use, there are methods generally better than using msconfig to prevent programs from running automatically at startup. Generally it is best to run the actual program and then enter the preferences to do this.

• When you try to install Windows XP I deleted some unwanted partitions on my hard drive and now my computer will not start.

  original title: file system

  Finally, I tried to install a new xp on my pc, I had to remove some unwanted parttions and trying so I deleted some system files and its caused me

  problems with my laptop will not start again.

  I try to boot from a cd, but it keep posting so tat files cannot be copied. to restart and boot from the system itself is not also possible.

  I got a copy of my xp on a USB but I can't get my laptop to boot from it

  I need help badly thanks

  pc files cannot copy

  Cannot copy the Office

  Win87.em

  Win_dos-chm

  Windows.hlp

  WinHelp.exe

  WinHelp.hlp

  wininstP.chm

  WMIC.chm

  wmifltrlW.chm

  wmiscmgr.dll

  windW.chm etc.

  Sonyvaio11, xp professional

  Hello

  not all motherboards were Boot from USB active

  Make sure to set the ot of CD/DVD drive USB key to be 1st in the boot order to boot from the XP disc

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to clean install XP

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  ___________________________________________________________

  Here is the vista forums

  Try the forums xp on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• I did a system restore to recover an uninstalled program and now my computer will not sleep.

  I tried to fix it when you restart the computer, and that doesn't seem to work. Running out of ideas! Help, please!

  Hello

  See if this information helps you:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• I downloaded service pack 3 Windows XP and now my computer will not start, what should I do?

  I have an old computer that I was not really to help and now I would use it for my son for doing homework, typing and some internet research.  I'm trying to update as much as possible.  I can only turn the computer in safe mode after I installled XP SP3.  Any suggestions?

  How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249

  then

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

• Delete a file system and now Windows XP will not boot.

  Original title: delete the file system
  
  I deleted a file in system 32 hal.dll and cannot start my PC

  Hi bibidennis,

  Perform a repair of Windows XP installation to fix the problem.

  For instructions, see the following article:

  Perform a repair Installation

  If you have installed Internet Explorer 7 or 8, see the following article for instructions on performing a repair of Windows XP installation:

  How to perform a repair of Windows XP installation, if a later version of Internet Explorer is installed

• Update just to install a version of that my computer will not work.

  I could not to update to the latest version of Firefox for several months that I'm still on OS 10.4, however at least previous update messages were smart enough to not make me download something that I could not run. Today, however, updated and then could not even open Firefox, indicating he could not run on my version of software. Now I have to try to find an old version of firefox, but I'm completely lost - I use an older version, think I had saved on my computer at the moment, but it is outdated compared to what I was using before your "update" undid all my previous updates that had updated me as I could be on my system , and now my modules will not race or anything like that. Now, I have to lose today try to undo what did your update. Any help would be appreciated, but update pricing as people know in advance what updated would be would be a better thing to do. My most important question - CAN any WHO TELL ME this HIGHEST UPDATED VERSION OF FIREFOX IS THAT I CAN'T INSTALL / USE WHILE RUNNING OSX 10.4.11, thank YOU.

  Firefox 3.6.28 is the highest which will run on 10.4 on PowerPC or Intel. The update to know that... http://www.Mozilla.org/en-us/Firefox/all-older

  Because Fx3.6 receives no security updates, you should probably consider an OS upgrade or a browser change at some point.

• My XP computer will not open any program or website without asking "open with", tried restoring the system

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/my-computer-will-not-open-any-program-or-website/420df6df-8cf3-48e6-810b-a00c3fd04c69

  I have the same problem and when I click on system restore I am invited again to choose a program to open it with... now what?

  I have the same problem and when I click on system restore I am invited again to choose a program to open it with... now what?

  the windows system restore feature is a very important system.

  and if it is defective or failed in some way, then this may be a sign that your whole system could be damaged or unstable.

  what you can try is execution of the system via safe mode restore.

  If this does not work yet, so the next step is to move your personal files, documents, photos and send boxes out of the system because the following methods that will help restore your system can put your personal files safe.

  so after trying safe mode stage and or copy your personal files from the system, we can take the next steps.

  Incidentally, if your computer came pre-installed with windows, or you halographic disc of microsoft for the operating system?