Shift caps lock flashing but the computer usually turn on g6

Just my computer stopped working. I turn it on and it acts like it will start but then nothing. The Caps light is on but nothing else, not to mention that the power button.  All of the suggestions. I took out the battery and you just plug it in and the same thing.

Hi McGlen,

The caps lock and power button flashing is a way for your computer to tell you that something is from bad material, most likely serious.

Please find below the link to the description of the meaning for these blink error codes:

http://support.HP.com/us-en/document/c01443366

Please let me know what you find.

Tags: Notebooks

Similar Questions

  • Pavilion G6 Caps lock flashes constantly but the laptop work.

    Hello!

    I've owned my HP Pavilion g6-2292sa Notebook PC (running Windows 8) for about 4 months now and tonight, so I was watching just the net that I noticed that my Caps Lock led flashing continuously, a flash every second. My laptop works fine, and I rebooted to try to stop the flashing, but with no luck. I checked Flash and positions that average hot flashes but mine does not fit in all of this. It is starting, it is not beep just the caps lock flashes constantly. I checked my other lights and see no other spazzing out like that. I'm rather worried because I had to have a new motherboard and HARD drive in a month of purchase. I googled not materialized. Can someone help me please?

    Definitley weird!

    Can you check the UEFI environment in F2? Let's see if it happens there inside and outside to win 8.

    If it happens again, we can try a hard reset - remove the battery and AC and hold the market for 30 seconds, then plug back in. We can also try a BIOS flash - checks whether there is a newer version or re flash.

    If the problem does not occur in BIOS - then you can try a Virus scan / update or restore possible system

  • G6 caps lock flashes continuously, nothing on the screen

    Hi, I have a HP g6-1325sa had a problem which had to replace the fan.

    However since then nothing appears on the screen F12 has an orange light and the caps lock continuously flashes every 2-3 seconds. This isn't a blinking code it does this constantly.
    So far, I have tried blocking the vents and leaving the laptop that works for more than an hour, as I've heard can be caused by dry solder joints. I have also tried to replace the motherboard and twice managed to get a cursor blinking on the screen but niether of those moments a normal startup is possible that the HARD drive has been disconnected on both of these occasions, the first time that it happened, I had just disconnected power and battery and power and hold for 30 seconds I'm guessing it's a cmos reset.

    the only cause I can think is that the processor is cooked when the fan has been replaced, but who had already paid for another motherboard I would like someone to confirm what it means when the caps lock flashes constantly and if there is another way to fix it.

    Thank you very much in advance for any help

    Solved this problem where everyone sees the same behavior.

    CPU replaced and he started to ask right now, it seems that my predecessor Cook the processor when they changed it is fan.

  • Laptop is not starting and CAPS LOCK flashing.

    Hello.

    I use a laptop HP Pavilion 1125sw g6. The laptop is around the age of 5 months and 2 days ago something strange happened. Let me start from the beginning; I changed the graphic properties of a game and when I pressed 'Make changes', the screen went blank, but the computer still worked. So I turned off (until the battery) and started again, and he went as far as my wallpaper and I have been able to view my wallpaper and all for a minute about and then deleted again screen. I tried to use HP advanced diagnostic tools that arise only when you start, but even with that the screen went white.

    The next day, that the laptop has no start, fans were still whirring, but not the BIOS screen came. The CAPS LOCK button flashes at intervals of two, the wireless button is orange, and that's all. Its been like that since. Any suggestions? Please, I beg you! T

    Thanks in advance.

    Product number: QA598EA #AKD

    Product name: HP Pavilion 1125sw g6

    OS: Windows 7 Home Premium

    Codes flashing on this page

    .

  • Caps lock flashing light

    I have a laptop hp pavilion 2237nr PC g6, and recently the caps light lock began to blink continuously. It stops for awhile but then it starts up again. my laptop seems to work fine but I am very concerned about the blinking light. Please help I am panicking!

    The problem with your computer is just a little different from the next thread that yours always seems to be start the system and work while the caps lock flashes.  Just not sure what that means, but I think that if go you to sift through this post,

    http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/laptop-won-t-boot-caps-lock-button-light-blinking/TD-p/1300161/page/2

    you might get a few suggestions.  In the post is a link to a document "traffic lights" which may also be useful.

    Good luck

  • HP envy 15 t-j100: screen went white and caps lock flashing after update bios!

    Update my bios to the latest version via app HP support and after it restarted the screen are empty and the caps lock flashing! What can I do about it?

    Thank you for visiting @omidmiri.

    Here on the Forums of HP's Support, you have access to many members of the community with solutions and suggestions to help. I understand that you have a problem with a black screen and the Caps Lock LED flashes after a BIOS update.

    The led near the caps lock shift keys and numlock blinks if a fault is detected during the boot process. The LEDs flash multiple times in a sequence and then stops.

    Please try to manually perform a BIOS recovery, as follows:

    1. Turn off the computer.

    2. Plug the laptop using the power adapter.

    3. When the computer is always off:

      1. Press on and hold the Windows key and the B key at the same time and then press in and hold the power button on the laptop for a second.

      2. Release the power button and the keys.

    By following these steps, the BIOS will reach the EFI partition in order to recover the BIOS to the latest known version of the BIOS from the hard drive.

    Source: Documentation computer won't start not and Emits a LED or beep Code .

    If this does not work, please use the above original document to calculate the number of flashes and troubleshoot accordingly.

    If you think this post has helped you, would help others joining and looking for a solution or you just want to say well done, please click the button accept as Solution or Thumbs Up.

    I would like to know how this happens. If you need assistance, I would be more than happy to continue to help!

    Have a great day!

  • Pavilion 15n208tx: caps lock flashes

    I use a computer hp laptop pavilion 15 n208tx of 1 and a half, it was perfect pc hp for me until this problem arised. When I press the laptop power button displays the wifi for the f12 screen white button on and caps starts blinking, caps lock flashes for about 12 times, exactly 12 times and then restarts again. and the laptop remains in this state until it starts itself after about 1-2 hours. I'm having this problem for about 2 months. Earlier, it was not so bad but now there has become a headache.

    Guys please help me, what should I do...

    I googled a lot, but it was in vain. My bios version is f.67

    Some have said that it is a bios problem so I tried to downgrade my bios but f.67 is not downgradable.

    Please someone help me. I'm really messed up man.

    This should help:

    http://support.HP.com/us-en/document/c01732674

    also

    http://support.HP.com/us-en/document/c02222922

  • Want to reinstall XP but the computer does not recognize the cd drive and does not allow for any installation.

    Accidentally deleted some system files and now the computer won't allow me to install anything. Tried to install a new cd player to replace a corrupt, but it does not recognize drive. All the driver and OS install CD. Help.

    Fix missing files:

    Try to run the checker system (CFS) files.  Press start, select run, type: SFC/scannow

    SFC will ask your installation disc (which you must have if you are going to re - install), put it in the drive when requested.  Leave the SFC to replace all missing or corrupt files.

    To resolve the startup problem:

    Check your BIOS Setup and make sure the optical drive is enabled and listed before the hard drive in the boot order.  When you start, there will be a message, "type any key to boot from the CD-ROM."  Type any key (execpt shift, shift caps lock, NumLock, etc) will cause the CD to be initialized in the installation program.  (I use the space bar, it's an easy target.)

    In addition, it would be useful to know a few more things: 1) what edition and service pack level of Windows XP you are running?  (2) what is the model and manufacturer of the optical drive, please?

  • Satellite L505 - 14 d: my screen is black, but the computer is still running

    I bought this computer in September and it worked fine except this time I had to reload the whole system because of two anti-virus programs, but I think that this has nothing to do with my problem. I've been on the PC, the other day, and all of a sudden it turned black. I wasn't doing anything unusual. When I looked at him the screen was all black, but the computer was working as he has always done. I also saw that the market and stop switch on the digital/lock pad would not react. (a green light appears when the caps lock/num pad is activated). What should I do to get this computer running again WITHOUT permanent black screen?

    Hello

    What happens if you press the power button / stop 4 sec long?
    You see the Red Toshiba home screen?
    Have you tried the external monitor or FN + F5 option?

    I think you should also try the common workaround;
    Remove the battery and unplug the AC adapter. Wait a few hours and reconnect the two parts. Then try to turn on the unit.

  • sleekbook envy 6: laptop won't start, caps lock flashing 3 times

    I want to 6 sleekbook and all of a sudden that it does not start and the caps lock flashes three times I already saw the code flashing and tried to rest the memory but it still doesn't work, I ran in problems with the laptop before the blue screen, but it was fixed its own I think

    Dear customer,

    Welcome and thanks for posting your question on the Forum of Support HP

    It seems that your laptop has a blank screen and a blinking/flashing CAPSLOCK all the time

    If the Capslock LED flashes 3 times this means "Non-functional memory error", in order to solve the problem, replace the card memory

    Note: If you are comfortable open Notepad, you can check how much you have memory module. If you have 2 sticks of memory, you can test one at a time on the two slots individually to check if the fault is with the module module slot or memory memory your laptop [repeat the same steps to test another memory module]

    If you find the above steps difficult and that it is a hardware problem and I recommend you contact HP Support by phone for further assistance immediately to get your diagnostic Notebook and repaired by an authorized HP Certified Engineer

    You can also check your warranty here to check the status of the guarantee

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    GBL84

    Although I am an employee of HP, I speak for myself and not for HP

  • Compaq Presario CQ62-412NR does not start. Caps lock flashes.

    The LED caps lock flashes repidadly with long breaks between each blink, the wireless light and constant and the adapter LED is steady. I read blink codes and determined, he was the processor, but the problem persists after him substituting a known good. I finished the resets power to clear the bios before and after the change of the CPU. I also tried to replace the RAM. Anyone here have a clue whats going on?

    This looks like a problem with the motherboard if you already replaced the CPU and RAM.

    It would be probably cheaper to replace the unit at this time only so, fix it or replace the motherboard.

  • Caps lock flashing, will not start

    Hello!!

    I have a hp pavilion dv6. last night it worked great, sa I closed my laptop, it went to sleep mode with the adapter plugged but without battery. today when I tried to boot up my laptop, I opened and it started only now I get a black screen with caps lock flashing light, I read on the site on an error that the plugs lock this blink, how many times it flashes before, but, my flashes more than 50 times, according to me, strange worm. What can I do about it?

    Thank you!!

    Hi Steve,

    Unfortunately, there are many possible causes for this problem, I mentioned the video chip as possible example given the symptoms you describe - you need get the machine examined to ensure.  Failure of a component is often extremely fast, insofar as it works one minute then is not the other.

    Kind regards

    DP - K

  • Shift caps lock for keyboard Razr?

    I just bought a Razr Maxx and tried to type something in all caps, but hitting the SHIFT key twice he brought back to lowercase. I noticed that it is using the keypad of Motorola... and is remarkably absent from the default keyboard Ice Cream Sandwich (I don't like Swype). Is it possible to return to caps lock shift, or do I have to download one of the Ice Cream Sandwich keyboards on the market?

    Its here again, from no caps lock shift, hold down the shift caps lock and it will have a blue light on the subject. This means that its on.

    If you start in caps lock, shift, or on the first letter he will not enter lock hope this helps boyfriend.

  • Tecra Z50 - A - 11 c: without capital letters when shift caps lock is enabled

    Hello

    I have a laptop Toshiba Tecra Z50 - A - 11 c with 3.70 BIOS...

    I noticed a strange problem with my laptop. Occasionally, when the CAPS LOCK is turned on, I can not write in capital letters when it is off, I can write in capital letters. I couldn't find the thing to replicate.

    Is there someone with a similar problem?
    What could be the problem?

    Thank you.

    The keyboard should work as follows:

    SHIFT CAPS LOCK is enabled-> uppercase
    SHIFT CAPS LOCK is on and down SHIFT-> small initial letters
    SHIFT key-> uppercase

    If this isn't the case, test the external USB keyboard.
    The use of the external USB keyboard can be useful to find out if the internal keyboard is malfunctioning.

  • How can I configure numerical Lock ON when the computer starts?

    I have a new laptop HP G70.  In the User Guide HP G70 on keyboards - C01540939.pdf, paragraph 3 using keyboards & pointing devices, Page 8 there is a note "the function of the keyboard that is active when the computer is turned off is restored when the computer turns on.   This does not work on my computer HP G70.  It always starts up the number Lock OFF.   How can I configure my computer to set the digit Lock ON when the computer starts?  I always use the number keypad and never use page up/down - button on top/bottom/right/lelt arrow.

    Also, how can I configure my computer to set the touch mouse on the computer OFF for the start.  I always use an external mouse.

    Any help would be appreciated.  It is a simple thing, but the present operation HP G70 is most annoying.

    PLEASE DO NOT CONTINUE TO MEET THIS PROBLEM!

    THE HP G70 WAS FAULTY!   EACH HP G70 HAS THIS PROBLEM!

    HP REPLACED MY HP G70 WITH a HPdv7.  THE HPdv7 PERFORMED THE DESCRIBER NERMAU LOCK FUNCTION AS IN THE HP INCTRUCTIONS.

    .

    Bob_in_PGI

    I'm surprised that nobody knows how to set the Num Lock at startup before you connect.  Where is the help of HP?

    I now have Windows 7 64 bit.

    There must be someone who knows how to do this.

    Bob in PGI

Maybe you are looking for