Shortcut problem Windows
We have a problem of unusual shortcut. There are 3 PCs. Two workstations run WIN Professional 7.0. WIN Server 2008 running the server (where the files are located). When you create a shortcut on a desktop, everything works fine. When you open the shortcut on a different workstation, the file is not found (shortcut returns has been changed, moved, so this shortcut will work more properly). For example, the shortcut is specific to the computer in which the shortcut was created. How do we create shortcuts on a PC that can be used on another PC?
Hi Mitch,
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
Tags: Windows
Similar Questions
-
No puedo instalar hardware device Epson Stylus Photo T50 y el problemas windows solucionador no lo can reparar una respuesta por favor Necesito UN
Hello
See this page to select your language:
http://support.Microsoft.com/common/international.aspx
====================================
Or sorry that it is area English.
On the top of this page for answers click v (English) in the United States and set on your tongue.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
When you try to see if my firewall is on his telling me because of an unidentified problem windows can not display the firewall settings
HelloIf you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042cI hope this helps you.Brian -
I opened the firewall windows on windows server 2003 R2 and also installed a quick heal antivirus total security 2009 valid until April 2, 2012
display error on the screen due to an unidentified problem, Windows cannot display Windows Firewall settings
thanx
Hello
The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
due to an unidentified problem, windows cannot display windows firewall settings
I am running win xp home edition SP3, cant acess windows firewall. I get the following error message: due to an unidentified problem, windows cannot display windows firewall settings
Any ideas on how to solve this problem?
"Due to a problem not identified, Windows cannot display Windows Firewall settings" error, try:
Start > run regsvr32 hnetcfg.dll [Enter]
MS - MVP - Elephant Boy computers - don't panic! -
Original title: how to enable the Windows Firewall?
How can I activate the Windows Firewall?
When I click on it in the Control Panel, I get a message that says "Due to an unidentified problem, Windows cannot display WIndows firewall settings".
I use Microsoft Essentials antivirus.
Hi Tom,
A firewall is software or hardware that checks information coming from the Internet or a network. The firewall blocks the information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP SP2 and Windows XP SP3 includes firewall software.
Perform the steps from the link below and see if it helps.
How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
Hope this information helps.
-
I can't turn on my or even access my firewall settings. When I try I get the following message, "Due to an unidentified problem windows cannot display windows firewall settings" help?
HelloFollow these instructions to fix the Windows Firewall:Download and install repair Windows:When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:-Reset the registry permissions-Reset the permissions of files-WMI repair-Repair Windows FirewallThen click Start. Once it is finished, restart your computer. Let me know if this helps you.Brian -
Original title: windows cannot display HELP fire wall settings
I go to the control panel and click on firewall and I get this message "due to unidentiferd problem windows can not view fire wall settings.
I want to check that it is on. Any suggestions?
I can't also on the wall of fire to the security settings in the control panel.
Help
Hi TomFlow,
1. which edition of Windows XP you are using?
2 did you a recent software or hardware changes to the system?
Method 1:
You can try to start the Fixit from link and check if it helps:
Diagnose and automatically fix problems of Windows Firewall service
Method 2:
We can refer to the article and try the steps.
You cannot start the Windows Firewall service in Windows XP SP2
Important: The above article tells you how to edit the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up and restore the registry, follow the steps from the link below:
How to back up and restore the registry in Windows XP
Method 3:
You can also try the steps in the following article:
You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2
-
Original title:
Windows firewall error desabaled
I have windows xp - help mechanic iolo - my firewall is deactivated automatically - when I click on activate up to a mistake pop [there was a firewall of windows activation error] and then I click on the top of the pop - windows firewall - Open button error [due to an undentified problem, windows cannot display the firewall settings].
my firewall won't come to help me.
Hello- You did changes to the computer before the show?
- What service pack is installed on the computer?
Method 1:You can run the fixit from following link and check the issue:Diagnose and automatically fix problems of Windows Firewall serviceMethod 2:Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.For more information about how to back up the registry, see the link:
Back up the registry
http://support.Microsoft.com/kb/322756See the article and check if that helps:
You cannot start the Windows Firewall service in Windows XP SP2
Let us know if it helps!
-
I am trying to install a new printer, and to do that I know I have to disable firewall settings. I try, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?
I tried to go into Windows and change the settings of the firewall, but I get the same message.
I also tried to run an update of the Windows security updates, but same message.
I use Windows XP Professional Service Pack 3
Any help would be greatly appreciated?
Thank you
M
HI Maria/Winston.Not, trying to be coy but. I've never had close the firewall to load anything. It will be, or at least should invite you to make a choice to leave the program to run or not? Nevertheless.If you have windows activation hurt you firewall can reactivate manually without going through the bugs that you can not. If you click Start and choose the runtime application. Type cmd, and then press ENTER. When the command prompt box appears type "netsh winsock reset" without the quotes. He'll say firewall reactivated and ask for a reboot. Restart the computer and it will be active again. Just trying to help.
Hi Winston/Hewlit,
Thank you both for your advice.While waiting for your answers, I pushed all sorts of buttons and downloaded all kinds of programs in the hope that I could break the firewall (Hewlit the printer I tried to install says to disable the firewall to install the printer, and then turn it back on?).After a reboot, the message 'corrupt windows\system32 etc' file came and asked me to put in the original disc of Windows XP, I did not.Cut a long story short, I have now booked for a technician to come out as I'm totally lost.Thanks again for your help,M -
"Due to an unidentified problem Windows cannot display Windows Firewall settings" on Windows XP
Operating system: XP w/SP3. MS Security Essentials installed. Problem: Cannot enable or disable the Windows Firewall; When you try to do, following statement appears; "Due to an unidentified problem Windows cannot display Windows Firewall settings.l
I've seen this before when I try to make appear the firewall configuration panel before that my computer has started completely. Wait a few minutes and try again has always worked for me... But in this sense, it is possible that a piece of the network process which depends on the firewall is not started on your system. Try to examine your system and Application logs:
(Start-> Run-> "eventvwr.msc") or
Start-> programs-> administration-> event viewer tools
and look for errors in the process that may not have begun.HTH,
JW -
Whenever I try to open the Windows Firewall is suite error, "due to an unspecified problem, Windows cannot display windows firewall settings. I tried to reset the firewall from the prompt with instructions, I found online but ask me who fails. When restarting I also get "error during loading of a file in the Temp,"algmd.dll"folder. I have Windows XP with SP3. This problem started after I installed antivirus software, ran scan, found 5 Trojan horses, and deleted files. Help, please.
Thank youYou're still infected:
Download, install, update and scan with these full free malware detection programs:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner
http://www.eset.com/us/online-scanner/ eset online scanner
Answer the following questions on your next post: brand and model of the pc, what is your antivirus?
Run all the analyses above, complete, such restart required.
-
Are there ways to create keyboard shortcuts in Windows Explorer?
Hello
My OS features:
Windows XP
Professional
Version 2002
Service Pack 3
So I do not know when Microsoft has implemented it (maybe?), but I was looking for a way to create a combination of shortcut keys which would act as the 'Alt + arrow up' in the newer versions of Windows...
If your are unsure what I mean (explanation below):
In more recent versions of Windows, for example, when you use Windows Explorer or when you're on IE and that you want to save a file using the "Save AS" function to 'Browse' to a place, you can use the combination of 'Alt + arrow up' key to go back one level in the current window/folder.
I know, in Windows XP Explorer, there is a button on the "Standard toolbar" makes this exact function, but it's so much more convenient to use the keyboard shortcut to do this.
Does anyone know if a way that I could implement this in Windows XP?
Thanks in advance,
Matt
Hi Matt,
Here are the keyboard shortcuts which works for Windows XP. You cannot customize the shortcut, as is the design of the operating system.
-
I get messages that support and problems Windows has stopped working. I told myself that I will advise if a solution is found, I get another box saying that I have to close becausse that Windows does not work. I also get messages that I have not more memory on line 2. What can I do to fix this?
Hello
1. could you give us the exact error message?
2. Once you get this error message? This is when using Internet Explorer?In the meantime, check out the articles below and check. Try to increase the size of pagefile.sys and check.
http://support.Microsoft.com/kb/2267427I hope this helps.
-
Use windows 8.1 keyboard shortcuts in windows 7
I use the ' Windows logo key + SPACEBAR "keyboard shortcut in Windows 8.1 to switch the input method. (Greek/English keyboard input language)
I want to use the same keyboard shortcut in Windows 7, but I can't find where to register the combination. Is it possible to use it, or is - this simple is not available in Windows 7?
And if it is not available there at - it a direct assignment of the possible registry for this shortcut?
Thanks in advance for any help. :)
Hello
Shortcuts to the Windows key and how to create your own, in Windows 8 | 7
http://www.thewindowsclub.com/create-Winkey-shortcuts-Windows
Create keyboard shortcuts to open programs
http://Windows.Microsoft.com/en-us/Windows/create-keyboard-shortcuts-open-programs#1TC=Windows-7
There is an app Windows key to create shortcuts
http://www.howtogeek.com/HOWTO/14249/create-custom-Windows-key-keyboard-shortcuts-in-Windows/
Maybe you are looking for
-
Wandering SQL Native Client Datasource - apparently, it's a pretty common problem and I see several resolutions to it. This problem started for our long company until I started working here. We do not allow remote connections. JDE Enterprise Serve
-
Display only work in safe mode
My name is Ben and yesterday I tried to install the latest driver for my NVIDIA 6600 and it failed. When I rebooted the screen is black when you go to the login screen, but I can hear the sound and the computer responds. I can boot into safe mode fin
-
Error message: "user profile Error - connected with a temporary profile.
folder lock... now cant get nothing in return. photos are important... I know that there is a way, as has happened before... but do not remember...
-
Storage of settings App, which is deleted when uninstalling
Hello I was wondering who will be the right way to implement a storage of locale for an app? Of course, if I use a shared file as a storage device, when the application is uninstalled, the data will not be erased. I need data parameters to delete whe
-
Updates to blackBerry Smartphones
I had 3 updates today one of them being blackberry app world and when I went to update my phone froze and since then, it takes about 10 seconds to get what it is and I can't even access the app universe at all on my phone now... Help please