Shortcut - right click - Properties-'Target' - I can not type in "target".
I just bought a dell with Windows 7 netbook. I want to install a game called Guild Wars. Like most fans of the knowledge in game, you can download the full game client and updates, by adding the command - image at the end of the "target" under properties after right click on the shortcut of Guild Wars. I managed to install the game but I can not type in the box 'target' to type - image at the end of the directory (C: / /... - imag) if anyone can help me with this problem I would really appreciate it. Once more, the question is, how can I do if I can actually type in the box "target"?
It is compatible with Windows 7 (at least Windows 7 64-bit).
In any case, this happens because of the way Guild Wars creates a shortcut on your desktop. What you can try to do, is make a new shortcut on the desktop and add the parameters you need in this way. Good luck.
Tags: Windows
Similar Questions
-
I have it has not enabled during installation because I had not noticed it. Now I can't find where to enter it. I tried in my computer, right click-> properties but there is no option that I had before I reinstall 'change product key '. I tried Control Panel-> system, but it's always the same window.
Thank youThe key in the report is the default key - which can be activated in any procedure.
If you managed to 'activate by the normal procedure', then you have an installation of counterfeiting.
MGADiag may actually have fixed the minor problems with your operating system - which then allowed you to change the key and activate this one.
-
"Right click on the mouse do not work"
Mouse: OP:
The right click on the mouse does not work. How should I do?Hello
You can view the configuration in the Control Panel, mouse.
However, if the rest of the mouse does not work, it is probably time for a new mouse. For example, right-click switch does no more work.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Tecra A9 - sometimes I can not type - click using the touch pad
There are times that I can not type - click using the touch pad or other keys (all of a sudden without any reason)
I can move the cursor in this case but not tap - click here to be able to click once again, I have to restart (this happens on both windows and linux)
On windows, I press alt + ctrl + del and when the Task Manager window I can tap it and after I do I can tap - Select something else and so on.
Click on the Task Manager click on anything else until I reboot and the problem goes away just to appear suddenly unexpectadly at the same time.I have the newest bios and driver accupoint
Any tips?
This happens only with touchpad, or when you use an external USB mouse?
For me it looks more like the Windows operating system freezes for a short period. Is this good? -
Cannot create a new folder, right-click and the option is not there
Cannot create a new folder, right-click and the option is not there
Hi Walt,.
Please follow the procedure described here: http://www.sevenforums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
I hope this helps.
See you soon
Julia -
original title: quick search
When I enter an apostrophe when online, it still shows the quick search box, and then I can not type more
Hello
1. it occurs when you use a particular application or all applications?
2 have you tried to use a different keyboard?
Method 1.
Check what happens when you use the on-screen keyboard. If it works fine here so you can check using another keyboard.Method 2.
If the problem persists using a keyboard screen ion then run the sfc scan and check.
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
To do this, follow these steps:
a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
b. type the following command and press ENTER:
sfc/scannow
The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
More information on SFC scan found in this document:
http://support.Microsoft.com/kb/929833I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Firefox 4 for Mac after upgrade I can not type in the comments of several web sites area
I've upgraded to Firefox 4 (beta very well executed) and now I can't type in the text boxes on a number of websites and surveys etc. For example on the Gigaom site I can not type comments (the name is fine, but the comments box does not work). But this is just one example. I ran across it on three other sites. Any ideas appreciated. (OSX 10.6.7, works fine on safari)
I had a problem like this, and it is thanks to fonts that were corrupted in Snow Leopard 10.6.7. Apple has a fix on its support page.
-
Most of the icons that appear on my desk I have download the new application files can be removed without uninstall or remove related files. But when I right click on the icons that appeared after reinstalling Panda Internet Security and download of Adobe Reader software to date there is no option to remove the icon, there is rather a prompt asking you if I'm sure I want to move the file to the trash - which I did not. When I look at 'properties', I see that the location for the two is my office. I'm trying to reduce the visual clutter, is it possible to do?
Hello
Click right icon - properties - general tab - Type of file - if it is a LNK then it's only a
Shortcut and if you DELETE it then only it is removed and the underlying program is not
affected. To see where the program check the tab shortcut - target:.If she is not a LNK and is a. EXE, com, bat and others so if if you delete the file
(which is not a shortcut) and then the program will not work. Shortcuts usually have ARROWS
on them in the lower left corner.For programs that are stand-a-lone (were copied on the desktop and not installed) you
can make files elsewhere and copy them (and other parts such as.) DLL or. CFG
only as examples and some will have no other room) to then remove them from the
Desktop computer. If you have any programs that were installed on the desktop, you need to uninstall
them and their re - install elsewhere.I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
"right click" on my mouse does not work
When I right click on an image and the "different alternativs" box comes upp that I left click on "Open in another tab" nothing happens! Today avast told me I had a bad add on that should be taken, so I did. What is the reason? How can I get the return function?
Take a look at your installed extensions, there are a number of extensions "Community Toolbar" which can result in Firefox 30, too.
If you cannot identify the cause...
Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).
If Firefox is open, you can restart Firefox Safe mode in the Help menu:
- In Firefox 29,0 and above, click on the menu button
click Help
then select restart with disabled modules.
If Firefox is not running, you can start Firefox in Mode safe mode as follows:
- On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
When the Firefox Safe Mode window appears, select "start mode safe."
If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. This might help others with the same problem.
- In Firefox 29,0 and above, click on the menu button
-
Why can I no longer send links to Web sites? By clicking on file > Send link does not work or right clicking on the mouse. Both worked before Firefox 6. I can also send emails to sites that don't specify their address, but to say "send an e-mail, click here. Everything works well in Chrome and Safari, but not in Firefox.
Could you check if your setting for mailto links has been deleted or become associated with an e-mail client that does not exist? Here's how:
Firefox > Preferences > Applications
In the search box at the top of the list, type or paste mailto and make a pause so that the list is filtered.
If change the dropdown to the right column does not improve things (sometimes go to another provider, which, to return and put back OKing won't work), you may need to reset your application preferences. This article has more information on how to delete a file, Firefox will return to the default settings: https://support.mozilla.org/en-US/kb/cant-download-or-save-files#w_reset-download-actions-for-all-file-types
-
NB100 - right click on the button does not
Bought a new NB100 which was pre installed with XP Home SP3 - 6 weeks ago. Excellent machine for it's size although a little slow.
Recently I used it in flight and had to shut it down before landing, and I let go to Hibernate by closing the form. When I opened the screen the next day the battery was flat, but otherwise was ok but now I find the click right no longer works. On the opening the left click login screen now does not work so I need to use CTRL-ALT-DEL twice to get into windows.
I reinstalled the mouse driver, but that didn't fix it.
If I plug a Microsoft USB mouse that works fine with the two clicks left and right to work, but not touchpad.
In desperation I even rebooted the complete software system 'install system' that is on the hard drive.
All ideas
Looks like the touchpad can be defective, or something has come loose.
You must send the system to a Service Center for repair. There is a list of ASP on the Toshiba site.
-
Re: The right click of the mouse does not work on the Satellite L450 - 18 d
My laptop is about 2-3 months and today just as the right click button stopped working completely.
I did a system restore with still no luck.Any ideas?
> the right click button completely stopped working. I did a system restore with still no luck. Any ideas?
It can be hardware junk... Perform a recovery with a recovery disk procedure to make sure that is not os/driver associated. Otherwise, contact the service centre in your country, it will fix it for free under warranty
-
MAKE A RIGHT CLICK DOESN'T WORK IS NOT ON MY DESK AND FOLDERS___
WHEN I CLICK ON MY DESK RIGHT NOTHING HAPPENED. THERE WAS NO POP UP MENU. IT IS THE SAME WITH THE FOLDERS AND DRIVES GOOD NOTHING IS PAST. WELL IT WORKS PERFECTLY ON MY BAR OF TASKS AND IN MY BROWSER.Help! Help! PLEASE I M IN TROUBLE!Hello
Please do not type in capital letters as it is difficult to read and considered to be shouting.
------------------------------------------------------------------------------------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------------------------
After the foregoing:
Troubleshooting problems of contextual Menu (right click) are a process of eliminating exercise.
Right-click accidents are usually caused by left 3rd, shell extensions which you can refine
with ShellExView. See "Method 2" in this article for more detailsMake a right-click is slow or weird behavior caused by context menus managers
http://WindowsXP.MVPs.org/slowrightclick.htm
and here:Manage the entries in the context menu for files, folders, disks, and objects in the Namespace
http://WindowsXP.MVPs.org/context_folders.htmThe ShellExView utility displays the details of shell extensions installed on your computer, and
allows you to enable and disable easily each shell extension.
http://www.NirSoft.NET/utils/shexview.htmlShellMenuView is a small utility that displays the list of menu items which appeared in the
context menu when you right click on a file/folder in Explorer Windows and allows you to easily
disable unwanted menu items.
http://www.NirSoft.NET/utils/shell_menu_view.htmlHow to change or remove items from the right click Menu.
http://www.WinVistaClub.com/E11.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Choose the program by default, open with context menu right-click on a program does not!
When I right click on an application such as a text document and try to change its default program (right click, open with, choose the program by default) I get an error says: "this file has no program associated with it for performing this action. Please install a program or, if such is already installed, create an association in the default programs control panel. »
There is no problem to open the application, but the problem is the button ONLY!
Fix association .exe, .txt, etc. did nothing!
You can see my thread on SevenForums here: http://www.sevenforums.com/performance-maintenance/221020-choose-default-program-button-right-click-not-working.html
and this problem as my problem: http://superuser.com/questions/69193/choose-default-program-does-not-work-is-broken-on-windowsThank you!
Problem solved by a person post in the Forums of Vista, that what he said in this thread (Thread link: http://www.vistax64.com/general-discussion/202928-open-choose-default-program-error-vista-2.html#post939031 ):
"PROBLEM SOLVED!"
HOO HOO!I want to thank you once again BRINK for ideas on how to solve this problem.
The next step below, this is how I solved this annoying problem:First of all, I came across this article on the Microsoft Web site by changing my google search to solve the problem. I started the google search with the following:
'open with' lack of context menu
Who brought results with the first being a microsoft link:
Command 'Open with' missing from the context Menu
Now the article didn't tell me exactly how to solve this problem, but it gave me an idea.
He said look at the following reg key:HKEY_CLASSES_ROOT\Unknown\shell\openas\command
And he said to watch the following default value:
C:\%windir%\rundll32.exe shell32.dll, OpenAs_RunDLL %1
After that, I noticed that the value was different, but then I noticed in watching the article says that this applies to Windows 95 and 98.
I then looked at the same key on my laptop that is running Vista Ultimate 32 bit also and I noticed there are subfolders on my laptop that my office did not have.
It should look like the following:HKEY_CLASSES_ROOT\Unknown
\DefaultIcon
\+Shell
\+openas
\COMMAND
\+opendlg
\COMMANDMy office was only the DefaultIcon folder.
Well I just copied the key from my laptop and voila... it worked.
I thank the gods of the computer. This has really been bugging me. I know that some people would have just reconfigured or installed a new but I knew it was an easy fix. I thought it was a reg key or windows dll file, but I just need to find the location where he resided in. Luckily I came across this article which pointed me in the right direction. Now I feel like I accomplished something.Sorry if this is a bit long but I HATE it when I'm looking for answers in the forums and I see someone say they have solved their problem, but they either don't say anything about how they fixed or that they are so vague that they could didn't say anything.
I hope this helps others if they have this problem.Thank you once again on BOARD! "
That's all!
-
Do a right click send to drive DVD not working not
When I right click on a file, the menu will appear including "send to", but when I click on my DVD player, nothing happens. If I put a CD or DVD in it will work, but I have to format a CD - R first. Until very recently, I could right click and send to the DVD player and it would ask me to insert a CD and then he would burn faster then the method I use now. Any who have all suggested fixes? I use Windows 7 Pro. Thank you.
Hello
Thanks for posting in the Microsoft Community Forum. According the description, I understand that the right click and send to DVD player option does not work as expected, rest assured that we will do our best to help you with this question:
Try these steps and check:
Method 1:
I also suggest to run the auditor of file system (CFS), parse and check if this solves the problem:
http://support.Microsoft.com/kb/929833
Method 2:
You can also create a new account from safe mode and check the issue:
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
If the problem persists no new user account, I suggest you follow the link below to screw the damaged user profile.
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.
Maybe you are looking for
-
FireFox does not allow this. Please advise on how to fix!Much Appreicated! Note: I have already followed and repeated the instructions as to the time the problem fixed, but obviously it is not allow me access to the home page of my choice!
-
Numbers 2.0 OS. Mavericks
I use only 1 worksheet. How do you get the numbers opens automatically without having to open newest. When I starts it opens the numbers in white and I have to have to file, open more recent. My old numbers open exactly there where I left.
-
Hotmail hacked and do not want to write information in case
Account Hotmail does not accept the password, reset password link is an unknown address in China, personal question is written in Chinese and don't want to give personal details forgotten password screen. Help? Asked to reset to go to this account, b
-
BlackBerry Smartphones No. sincronizan los contacts
Hello that tal. Desde approximately 60 dias no will is the sincronización inalámbrica los contacts in BB Curve 9300 e. Me release con mi operator inalambrico y me informed that el Blackberry solorte me daria the respond a mi problema. ¿Alguien me pod
-
For Inspiron 1526 base system device drivers
I recently installed Windows 7 on my Inspiron 1526. All the drivers have been installed correctly, but the 'Base system device' driver could not be installed. I tried the option "Search automatically for updated driver software", but no driver could