shortcut screen locking with 3rd party keyboard

Similar Questions

• 10.11.3 mission Control "Show Desktop" does not work with 3rd party keyboard

  I use a KENIMBENI Multi sync Bluetooth keyboard as seems to be the best solution when you want a wireless keyboard with a numeric keypad on a Mac.

  The KENIMBENI keyboard has its own combination of keys rather than Apple-command 'Mission Control' 'Show desktop '. It was working fine until 10.11.2. But now, after upgrading to 10.11.3, I find no way to make this button (or any other combination of the command 'Show desktop') works. Some key or combination of keys I enter the keyboard and/or the Mission Control preferences pane, will be shown on the screen, but the system does not react to it. I also tried switching to use several spaces to use a single space extending on my two monitors, assuming that it could have to do with behavior change - but none of this helps.

  I have an another Mac Apple original wired keyboard, and here the command-'Mission Control' combo works fine as expected.

  Can any that confirm - and perhaps know no work around? I'm a little old school management Finder and file and so use orders 'Show desktop' several times a day. Thanks in advance for your suggestions!

  You should discuss with the developer of the material. If it works for your OS with material Mac the fault lies with the proponent to provide a usable instance of this device with a newer OS, if they wish. In addition, we use a Logitech wireless keyboard solution full size and they are solar powered so no battery and no problems so far.

  http://www.KANEX.com/contact/TechSupport

• Premiere Pro CC 2015 ripple Edit Major Lag with 3rd-party Audio effects

  Greetings,

  I upgraded to CC 2015 from 2014 CC yesterday. Opens the project I had worked on to discover that when I realize a montage by waving there is a gap of 7 to 10 seconds before I can resume playback. When I edit by ripple the program monitor past from the view of the only program to place 2 view that shows you the exit point of the previous element and point to the next clip. At least that is what I think it does. It is difficult to say because as soon as I ripple the program monitor hangs for several seconds.

  It seems that it is a problem with the audio effects part that I loaded in the Audio Mixer of the track. I use a Native Instruments compressor and limiter vladg/sound. I use some effects audio stocks like left fill with law, right to complete with the left, equalizer and multiband compressor. I think I saw somewhere else on these forums that there are other issues associated with the allowed effects of iZotope in first. If I create a new sequence in the same project without audio effects, ripple edit works very well. This is a major issue because I have been using these audio effects in the Panel mixer Audio track for many months.

  I have no problems with these 3rd party in 2014 CC Prem audio effects.

  This is a recording of the program screen. https://Vimeo.com/131549297

  Here are my system specs:

  First Pro CC 2015

  Win 7 64 bit (up to date)

  I7 970

  24 GB Ram

  NVIDIA 970GTX (driver)

  500 GB SSD

  Internal 2 TB

  2 x internal 4TB

  3 TB internal

  12 to RAID 5 via USB 3.0

  USB 2.0 and 3.0 readers

  Audio device FireWire (M-AUDIO FireWire1814)... even if I'm not using it for reading. It is connected.

  Images East of C100 H.264. MTS, JPEG. MOV EI, JPG still images, simple titles in Premiere Pro and color mattes.

  Multiband compressor is certainly a problem with PP 2015 and trimming.  Try to delete this one and see how it goes.  Report results.

• Calibration Toolkit with 3rd party ECU measurement and CAN interface

  I would use the NI ECU Measurement and Calibration Toolkit with an NI CAN interface.  The interface devices supporting J2534 are very common.  The NI ECU Meas and Cal Toolkit allow this? If so, how does one time on another interface CAN interface to the Toolbox?

  The NI ECU Measurement and Calibration Toolkit National Instruments Hardware only supports.

  If you want to discuss the possibility of using any 3rd party hardware, please contact your representative local.

• Overlapping address space question - how to NAT inside the traffic to one address different range on SAA for comms with 3rd party VPN?

  We already have a connectivity of IPSEC VPN site to site with a 3rd party.

  They must be able to access a couple of servers on our internal network but the problem, it's the subnet these servers are hosted on clashes with the address space they already used elsewhere. Thus, they asked if we can put in place a new subnet and have our firewall (running v7.2) ASA NAT the traffic to and from our servers ' real' internal addresses.

  for example

  • 3rd party 10.10.10.0/24 subnet
  • Our subnet 10.20.20.0/24 (but this clashes with the 3rd part of the address elsewhwere space)
  • Our 'real' internal server addresses are 10.20.20.1 and 10.20.20.2

  How do we setup NAT on our ASA translating internal addresses 'real' of these servers for some other addresses that don't clash?

  that is that the 3rd party is concerned, they would simply have to communicate with this 'new' subnet, say, 192.168.20.0/24 and our ASA firewall NAT traffic accordingly to allow some comms unfold?

  (And it should affect only comms on these servers for the 3rd party - NOT for one of our other multiple VPN connections! "And should not affect the other comms from the servers themselves!).

  That's what I've tried so far, for one of the servers, without success:

  On ASA:

  !

  access-list 1 permit line 3rdpartysite extended ip host 192.168.20.1 10.10.10.0 255.255.255.0
  !
  access-list SERVER-NAT line 1 permit extended ip host 10.20.20.1 10.10.10.0 255.255.255.0
  !
  static (inside, outside) 192.168.20.1 public - access NAT SERVER list

  "sh xlate" indicates:

  192.168.20.1 global local 10.20.20.1

  Can someone help with the necessary NAT configurations on the ASA?

  Thank you!

  'Clear xlate' after you have configured NAT statements?

  When you try to ping from the 10.20.20.1, get it to the ASA? You have an ACL on this interface that would block the ping? Also, can you run capture packets on the ASA to see if the ASA receives even the traffic?

  What is the subnet mask of the 10.20.20.1 host? I guess it's 255.255.255.0?

  You don't need something specific on the ASA with regard to the delivery of the 192.168.20.1.

• Integration with 3rd Party App

  We currently use a 3rd party called media 1 channel to carry out the investigation or to submit and Enter to Win forms.  Now, that exist outside of the Eloqua platform.  Is there a way to integrate this information?  Have send their form, survey, etc. flow directly in Eloqua.  I talk about them using a form Eloqua and here are their concerns:

  "Eloqua had an open API, we could use to send data in the database? This would probably include a function we call that sends to your server of an object that contains the data that is appropriate; probably json or other type that when received them by your server would be analyzed and added to the critical database.

  If I'm wrong and that you do not have this form of API; in the txt file you provided the submission form called a file, we could potentially call it directly within our applications and Web sites and pass it the correct information, but we need to coordinate the information exactly. In addition we are a validation uncompressed js file so we can ensure that the validation is rewritten correctly to our projects. »

  Hi Megan,

  Eloqua has many options with regard to sending data to the Eloqua system. You can get all data from any system for contacts and send it to Eloqua. Look at the platform of the building on The Eloqua - A Resource Guide to get started. Indeed, if nothing else, you can transfer the form submiited from your site or application data directly in Eloqua and perform various other process forms: overview of processing &.

  I hope this helps.

  Thank you

  Amit

• PDF Conversion files do not install with 3rd party software.

  I used the software and data base of third party software (field office) and Realfast forms of contract.  The ability to PDF coverter will not install during the installation of the software.  (I installed AgentOffice allowing installation to move on to the pdf section.)  With Realfast, it seems to install, but does not work.)  I had to communicate with these two software vendors and have spent a lot of time remove and reinstall the software without success.  Support think it's something in my system.

  I even installed PrimoPDF, a free PDF conversion tool, to work around the problem.  However, even after a successful installation, the printer is not with my printers.  Therefore, I have no way to convert files to PDF format.    Help, please.

  Hello caryrealestate,

  ·         What is the exact error that you get while trying to install this component?

  ·         Have you checked whether the software is compatible with Windows 7?

  You can follow the link below to check if the contact PDF database you are tying to install is compatible with Vista.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  Alternatively, you can try to install the database in XP compatibility mode and check if it works.

  Here is an article that will give you more information about this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  In any case, if you do not all work programmes for conversion to PDF, you can consider converting by using Office (in case if you want to convert word files to PDF).

  See the links below:

  Office 2003:

  http://Office.Microsoft.com/en-us/Word/HA011683331033.aspx

  Office 2007:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=4d951911-3e7e-4AE6-B059-a2e79ed87041&displaylang=en

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• 3rd part Solutions Dr. available with 3rd party DR Solutions available

  Dear Experts,

  We have Oracle standard Edition 12 c

  With Oracle standard Edition there is no guardian of data available.

  Now, what are the 3 rd party Solutions DR available?

  How about dbvisit eve? Did someone used before?

  These solutions can provide Solution DR? :

  • SAN replication.
  • MQ disaster recovery solution

  You please have some of your ideas in the present.

  Thanks in advance.

  Kind regards

  IVW

  Hello;

  There is a review of it here:

  https://Oracle-base.com/blog/2012/01/10/dbvisit-standby/

  and

  DBVisit watch review | Dead-Simple solutions

  I doubt, that they stayed in the business, if it did not work.

  Best regards

  mseberg

• Management Opt Outs with 3rd party

  Our company works with several partners who offer our services to their clients. We work with a partner who now wants to send an email to their list of customers to promote our service. My question is with respect to the CAN-SPAM. We need to provide our partners with OUR list of derogations to delete their email? My instinct is to say no because the e-mail comes from the partner and not us. Any help on this is greatly appreciated!

  Hi Krista,

  So if I understand, another company will send an email to promote your service... in general we end up making such a case is double... provide our clients with a third party opt out link to us so that contacts can tell us that they do not want us to parties third most and then a direct link for people to not receive emails in the future.  Now, for us, it is a rule of confidentiality of company.  In regards to your opt-out/remove list, whenever we are promoting to a third party, we need to their dismantling as well file because if one of the people who may have given up your email get this email, they can complain... better prevent

• Log Insight integration with 3rd party Franken

  Anyone who sets up journal Insight to integrate with a third party like QRadar SIEM so that your VMware assigned priority to the Insight Journal events get passed to your SIEM?  The caveats with this?

  http://KB.VMware.com/kb/2053382

• WRT160Nv3 problem with 3rd party applications of internet Apple & Dropbox

  Here's my situation, had a WRT54G Router for several years, he kept dropping my internet connection and after several updates of the firmware, I decided to move to the WRT160N. These two works of apple computers at lightning fast speed, same xbox 360 which is appoximatly 40 ft, in a basement works fast, netflix streaming that is built into my blu ray player works as well. The problem I have with Itunes and Dropbox, both use the internet to connect, but every time that I try to connect I get internet connection errors. My macbook pro supports a/b/g/n wireless, so I'm not sure of what could be the issue. I have the latest version of Itunes as dropbox.

  Also, I checked my router settings, he is currently in mixed mode. Do you think I would need to change to mixed mode B - G, it seems kind of silly to have a N Router and only being able to use G.  Other experiences with this problem?

  Thanks, I was able to solve this problem by configuring the proxies on my internal airport. It turns out that I had information specific web proxies, once I removed them and not the box of proxie, everything was back to normal. Now, without doubt, I realized that my old router probably would have worked very well, I didn't realize this in the first place.

• How Oracle Clusterware Oracle RAC and 3rd-party Clustering with them

  I have some questions on how Oracle, Oracle RAC and 3^rd party clustering CLusterware fit between them.

  Q1. My understanding is that the Infrastructure Grid Oracle Clusterware is Oracle's Clustering solution that allows applications to cluster? that is, it is a general clusterware solution to compete with those already on the market. Is this correct?

  Q2. So why CARS is necessary for the Oracle cluster databases? An Oracle database is not just considered one application like any other? So why can not just use you GI / Clusterware to gather what you would do for any other application? Why so you need RAC to the Clusterware Summit?

  Q3. Is it is possible to combine an Oracle database using 3^rd party of clustering and not use Oracle Clusterware and CARS at all that is can you say cluster, an Oracle database using say Sun Clusters, Clustering AIX or Linux native same clustering?

  Q4. If the RAC is purely for Oracle Cluster databases - what is with the title "Real Application Clusters"? What's real on this subject?, what to ask?

  Q5. I also read that RAC can use 3^rd party of clustering. However if you decide that this is the case, then you need to install Oracle Clusterware when even (I think for interconnection must be created to allow the merger with Cache between Instances of node?).

  Is this the case?  If yes why never bore you with 3^rd party clusters? -Since you will have to install Oracle Clustering anyway - and I probably have to license (all I can think about is the scenario that you already have a cluster of 3^rd party in place and you decide that you need to use the same material for a database cluster)?

  All wisdom greatly appreciated,

  Jim

  Yes, with 10g, you had to use the CRS, and with 11g, to use the GI.  For 9i RAC, you would use Verits Cluster and Sun Cluster or anything else.

  11g RAC to GI.  As above, you can use clusterware extra if needed.  I gave the example above where to a 10g RAC we used the CRS to the cluster database/listener/vip and allowing groups of volume and filesystem in HACMP cluster.  File systems were not shared, but could switch to another node failure node, who has been treated by HACMP.  The volume of the groups containing the raw devices were shared volume groups.  For 11g, I never used extra clusterware on top of CRS and have always used ASM which is part of the GI.

  The application provider only certified database to run on 10g on AIX with raw devices.  What is strange about that?  It would be unusual that you probably expect to use ASM instead of raw devices, but it is what it is.

  See the following Note of Oracle for more information: using Oracle Clusterware with vendor Clusterware FAQ (Doc ID 332257.1)

  It is perhaps easier to explain if you can explain what problem you are trying to solve?

• 3rd party apps stock tv turns off

  I bought an Apple TV 4 and I really like it.

  I have a receiver with speakers, and a TV connected to the HDMI port out of the receiver. Apple TV is connected to the receiver with HDMI.

  The only problem I have is that I installed two applications of radio to listen to my local radio station, but two of them stutter (IE as the app refresh of the stream after every 5 seconds) when I turn off the TV and the receiver stays on (audio only then hollow speakers connected to the receiver).  All stock apps work well (music, Podcast, sharing of computers/Home). There is also no problem with these two apps as long as the TV.

  There is a general problem with 3rd party applications or is it just bad luck so I downloaded have the same problem?

  It is not apps, it is because you do not have your on TV.

  Users have experienced different results when you try to use the Apple TV for audio only. Some have found it works well, others have found that they need to have the TV on get audio and others have found that they need the TV to start with, but may turn off when the audio starts to play.

  I suspect these variations result from the type of connection that the TV offers and therefore may vary depending on the make and model of TV.

• SX20 with third party camera

  Hi team,

  Can we connect Cisco SX20 with 3rd party camera?

  Since the SX20 12 X comes with a HDMI + power & control cable.

  Only requirement is for the video. Third party camera has a HDMI output.

  Camera controls & Device Control will be by Crestron.

  Someone Pls help on this...

  Thanks & best regards,

  Bharath

   
   
   

  As long as it is a supported resolution, it should work. Personally, I used my camcorder as an EX90 entry and it worked fine.

• 3rd party such as san replication solution: strategy

  Dear Experts,

  Can you please share some of your ideas.

  Oracle DataGuard comes free with Oracle Enterprise Edition (EE). The only reason why a company could NOT use Oracle DataGuard is because they are not on the ERA and the cost of upgrading to EE just to use DataGuard does not justify the price.

  With 3rd party such as san replication solution. (for example hp3par)

  It is obvious that the all-flash backup can be quick.

  What should be the strategy to have DR site get a few seconds, if the primary site failed for some reason any

  1. daily incremental backup with RMAN. And archive backup runs for every 1 minutes

  2. so that the DR site facing up and running within 60 seconds, it still requires too much time to restore the database on remote site and have archive APPLIED setpoint

  What could be the solution with san replication? RTO = 60 seconds

  Thanks ivw

  Hello

  Great topic, I'll try to summarize all this in a post.

  I have worked with HP EVA for a few years and I must say that I have used many of the features of replication - HP EVA Business Copy (local replication) and HP EVA continues access (remote replication) as well - for the oracle database and other applications as well. Most storage systems use copy-on-write to create two points in time of the LUN (snapshot) image or clone LUN using cow again.

  Of course, like other people, said earlier the replication SAN is block based, in the same way with Dataguard, you have synchronous and asynchronous replication. When your data is written to the data files it usually goes in storage cache and then is pushed down the disc as soon as it will be more efficient, at the same point, replication is pushing data to the Dominican Republic. The same way with Dataguard if you use synchronous replication that you won't get you "speedy return" until the blocks of primary storage has been written for DR storage system.

  I never had problems with replication to be honest. I used a lot of copy of databases of production using local replication. For example if you want to quickly test a patch on the production system, you can create a snapshot that will only increase with the amount of changes you have made. The only concern is nowadays though we use ASM so if your diskgroup names are the same in DEV that the PROD does not work the approach that I mention.

  Regarding remote replication - because you do not have Dataguard more every time you failover to the Dominican Republic to your database will pass by instance recovery!

  Regardless of the type of replication is not the speed but the latency of the network - SAN or Dataguard, you will always have a penalty of a long replication distance. The biggest typical WAN latency factor is the speed of light, via fiber optic cable, which is about 124 miles per millisecond. Based on that you can calculate what would be the round-trip latency time.

  Indeed for many people SE installation choose DBvisit Standby to manage their databases on hold. I did the installation of the couple and it is really simple and works out of the box. However, your RPO depends on how often you switch your redologs and how many times you ship them to the backup site. You must configure dbvisit to spend with each log file (all the 5,10,15 minutes) OR configure archive_lag_target to configure OR use both at the same time. Also, you can store a copy of the archivelogs on a separate location just in case, for example, an NFS share.

  And finally my five cents on RAC on Clusters of extended - be careful with this one. Each of the nodes in the extended database cluster need access to both storage (primary and DR) systems. You must also third location to store a voting quorum disk, usually an NFS share. It is also very important to note that the latency between the nodes is of crucial importance due to global cache activity.

  Kind regards

  EVS