Should card pci wireless antenna? -L10 SP

Hi all

I just installed a pci wireless card in my L10 Pro Sat. No probems, he found and installed normally, but I wonder if I need antenna? I thought they'd already inside my unit, but I didn't know everything. Please tell me if I need to buy and connect these as well.
Thank you

Hello

Yes. All WiFi ready units have a wireless antenna.
Near the location for pci wireless card you can find antenna cable (black and white cable with small connector).

Tags: Toshiba

Similar Questions

  • Satellite P300-23F-mini-PCI Wireless card Replace?

    Question: would it be possible to replace the card of wireless mini-PCI Intel 5100AGN with version 4965AGN or 5300AGN?

    The thing is, recently I bought the Satellite P300-23F. Great laptop. Apart from one thing. I use the Intel 5100AGN wireless. Type of damage, the rest of the components used to build this laptop are high-end. I would have liked to see the 5300AGN of even the old 4965AGN adapter instead. These are both a bit more expensive, but still on the market for the price difference is a simple slice of $20. The 5100AGN TX is only 150 Mbit, which is half as fast as the two other Intel wireless modules. In general, a lot of people seem to have problems with the 5100AGN, seems to be a troublesome product altogether.

    Performance of the real world of the 5100AGN on a Linksys WRT54G is around 15 Mbps (1, 8 MB/s). My other computer laptop, equipped with a 4965AGN will be double that in the same circumstances. Tried all the drivers I could find, but the above values are the best I can get.

    Hello

    I think that this should be possible, but you must use Mini-PCI cards.
    The antenna WLan that is placed behind the screen provides two sons; black & white.
    A white cable normally goes to the HAND and a black to the auxiliary voltage

    Greetings

  • My emachine is a model of 1810. Can I add a PCI Wireless card to it?

    My emachine is a model of 1810. Can I add a PCI Wireless card to it?

    The ET1810 has options for adding hardware below. As long as you install the driver and the material below matches care, you should be ok.

    PCI1 ~ 2 32-bit card add-on slots

    PCIE1 PCI Express x 1 slot

    PCIE16X PCI Express x 16 slot for GUI

  • I have a Mid-2010 Mac Pro Tower running OS Yosemite to which I would like to connect a Tower (G-Technology) G-Speed Q RAID via eSATA connection.  What type of card PCIe eSATA should I install in my Mac Pro tower to enable such a connection?

    I have a Mid-2010 Mac Pro Tower running OS Yosemite to which I would like to connect a Tower (G-Technology) G-Speed Q RAID via eSATA connection.  What type of card PCIe eSATA should I install in my Mac Pro tower to enable such a connection?

    https://eShop.MacSales.com/item/NewerTech/MXPCIE2E2U3/

    https://eShop.MacSales.com/item/NewerTech/MXPCIE6G2S2/

    https://eShop.MacSales.com/item/NewerTech/MXPCIE6GRS4E/

    https://eShop.MacSales.com/item/sonnet%20Technologies/TSATA6PROE2/

  • Install the Mini PCI wireless network card. Need help!

    Hello
    I have laptop Toshiba 5200-701 which is upgradble of wireless network, so I bought the mini PCI card Philips wireless brand. The reference is PH12127-E/PH11107-E and support 802.11a/b/g network address MAC 00 4F 05 43 88 F4.
    When I inserted the card in the laptop it shows new hardware found and then I downloaded website IBM software since I was told that this card is basically designed for laptop IBM, however, my laptop is unable to install the software and still facing problem... so please could someone help.
    Thank you very much.

    Moral salvation

    Well, in my opinion, you bought a bad wireless card. I don t think that your game can works with your device. Before you buy some hardware components, you need to check the compatibility of these parts. Toshiba service partners always have information about the units on the right. However, I found a wireless card that is compatible with your laptop. It's a PA3212U-1MPC.

    Good bye

  • Satellite Pro 2100: PCI Wireless card

    Install a PCI card Broadcom wireless and need to know where the overhead wires are routed (screen or base) so that I can try and extend one is short of 1 cm-oh and make black and white colors correspond to large and in the?

    Hello

    As far as I know white cable goes to the ESSENTIAL and a black to the power supply if you need some specifications or documents on how to disassemble the device it can be a problem because it's not in public.

  • Need advice for the purchase of a mini PCI Wireless

    Hello

    I have a laptop Toshiba I bought nearly two years ago. This laptop has an Intel 2200BG wireless chipset, which works, but the quality of connection is quite low. Sometimes, the connection speed climbs, sometimes it falls in total. I tried all the updates driver, power management tips and everything that could be found on the net. Some of these help, but there is always something that doesn't work as it should.

    Long story short, I decided to buy a mini pci wireless card. The problem is that these cards are nowhere to find. There is nothing on the Toshiba site, and apart from a few offers on eBay, there is almost nothing to choose. I know there are other options, but I prefer a mini pci card.

    Can someone help me on this issue?

    Thank you

    Peter.

    Hi Peter

    Can you please tell us which laptop model you have?

    In any case, the network without WIRE Intel 2200BG card is good enough and works very well on my Satellite M70 (with the latest driver). Download speed is very good and I do not need a wireless network card. I don't know what is the problem with WLAN connection in your case, but please try to test with another router WLAN (maybe your friends have all other routers). Also, install the latest WLAN driver for this card.

  • Advice of A20 103D Mini PCI Wireless Installation of satellite map

    Some basic tips on installing a Toshiba PA3300U-1MPC card can be appreciated. The manual States that the card must be installed by a qualified engineer. The main request is where can I connect the wires black and white to. will I need to download a driver or will the device automatically recognized? Are there other issues to be aware of?

    Thank you

    Hello Wally

    As far as I know there are two connectors that are marked with the HAND and to THE.
    In this case, please connect the white cable to the HAND and the black cable to the auxiliary voltage
    Additionally, you have the drivers and Utilities CD Utility & Tools, or you can download it on the Toshiba site. To my knowledge, the PA3300U-1MPC is an Atheros WiFi card.
    Therefore, you need Atheros AR5001X Mini PCI Wireless Network Adapter V2.1.2.16 and Atheros Client Utility V2.1.2.16

    Good bye

  • Satellite Pro L20 - what card PCI I need?

    I have a Sat Pro L20 (model PSL2YE-00J005EN). What card PCI I need a Wi - Fi connection? They all seem to be 32-bit cards but my manual says that I have a 16-bit location.

    Hello

    I visit the site Web of Toshiba accessories and I found information that a unit is always the wireless card. Have you checked in the Device Manager if there is a wireless card?
    Unfortunately, I don t have found a part exactly compatible wireless card number but if you want to order a so I recommend you contact Toshiba service partner. Here, you can order the miniPCI card that is 100% compatible with your device.

  • How to change the configuration of the BIOS with NO SIGNAL - to accept the new card PCI - ex

    Compaq Presario SR2030NX

    Product #RJ036AA

    S/N {removed privacy}

    MB: ASUS A8M2N - LA

    Bought: October 2006

    OS: Windows XP Media Center 05

    New graphics card: MSI N210-D512D2 graphics card GeForce 210-512 MB, DDR2, PCI-Express 2.0 (x 16), 1 x DVI, 1 x VGA, DirectX 10.1, mono-emplacement

    New: 480w PSU

    ERROR:  NO SIGNAL on monitor and can not reset the BIOS to accept the new video card in the PCI slot

    PROBLEM: The user reports the monitor suddenly became white with blue lines finally erased.   On start-up, the screen shows "No Signal" then turns off.

    Troubleshooting has included:

    Fixing monitor with its cable to another PC - monitor work

    Fixing working monitor and cable to the PC - No Signal

    There is no boot beeps, fans, lamps, not work cable defeated, no video.   I concluded the embedded video component failed.

    Installed the new video PCI - ex card and new power supply 480w and still get NO SIGNAL.   New video card specifications called for a minimum 350w power supply.  The fan on the new video card PCI - ex works.  Search on the HP Support pages indicates that the BIOS should be modified to change the type of PCI slot type in-flight video.  Makes perfect sense to me, sounds like it might work.

    How to reset the BIOS when you do not see what you are doing?

    I have moved the jumpers to reset the CMOS, but cannot tell if it worked or not.  I tried a couple blind BIOS resets, but I could do this for months.

    If I could determine the Version of the BIOS, I might be able to blindly to reset the BIOS.  The Compaq Options of Menu and "BIOS Setup Utility information" web page provides instructions for BIOS version 6 or less and version 7 and greater - menus and access steps are very different.

    QUESTIONS:   How to determine the version of the BIOS.  Which key I hit to access the BIOS (F1, F10, esc, Del)?  Which menu I followed to reset the type of video, so how can I save and exit?

    

    Thanks for any help

    GJB

    Thank you Paul,.

    I didn't know that it was just a function of Regedit - piece of cake.

  • card PCI-7332 performance is slow

    To using a card PCI-7332 in a Win7 pc and it runs slow.  By slow I mean what is specified in the 7330 OR and the Timing of 7340 NOR information sheet States that my while loop should run at a speed of 10 ms.  His race in a rate of 125ms.

    Please see the screenshot of the vi below.

    I don't think there would be a significant improvement by moving to a RT system.  It is true that there is less processing overhead compared to a pc, but the algorithms are the same.  A RT system would be more helpful if you were more interested in a more deterministic control.  You must use a RT system if you wanted the iterations to be ' one time ' not necessarily faster.

  • How to install card PCI-8431 in replacement of the card PCI-485/8?

    I have a computer with an old card PCI-485/8 I want to replace it with a new card PCI-8431.  SERIES OR in the computer is v.3.4 and v.3.5 came with the PCI-8431.  Of course I should put to date OR SERIAL.  However, my concern is what happens when the system detects the new card?  The replacement is as simple as changing the cards or will there be a problem with the ASRL how numbers which they are currently Setup?

    Please indicate the appropriate measures to update the computer.

    Thank you

    Dave

    Thank you Sara for your answer.  It will take some time before I can come back to this project. I'll let you know if I have other questions.

    Thank you

    Dave

  • New 5 Ghz PCI wireless adapter for dv9438ca?

    My new 5 GHz router creates a mismatch... can I buy a new 5 GHz Mini PCI wireless adapter for the following PC...?

    HP Pavilion dv 9000 CTO Entertainment notebook computer PC

    Model # dv9438ca

    Prod. # GL887UA #ABL

    [Personal information]

    It was delivered with... Part # 441090-001... Wireless 802. 11 b / g mini PCI card (Broadcom, Hoya) adapter - data rate of 54 Mbps, 2.4 GHz of bandwidth of operation...

    I want to install any compatible which will allow me to access 802. 11A or 802.11n at 5 GHz

    Please & Thanx

    Beauvaidos

    [Personal information]

    Maintenance and Service of Guide available on this link, I don't see a N Wireless internal that is compatible with the BIOS on this laptop... You will need to get a USB external, if you need to connect to Wireless N

  • WWAN card and wire antennas for E7440

    I bought a couple of computers Latitude E7440 and I need to install a Verizon 4 G WWAN card in one of them. In the past I have bought from 6430U and have bought and installed used DW5800 (Novatel E362) and they worked very well, even if I had to do some monkey business to get the drivers installed.

    Now, I try to install the DW5800 (Novatel E362) of cards in the E7440. The strange thing is that there is no antenna cable to connect the WWAN card, even if it doesn't seem to be a small channel in the chassis. Antenna drivers only I see go to the Wifi card.

    I called in parts of Dell and the associate said "the list of parts shows not all antenna son so he need not". I'm pretty skeptical of this.

    The map recommended for the E7440 is the DW5808 and he indeed ports antenna on this subject. I didn't found any E7440 to sell broadband installed with network cards. Either they are not available to the general public on the Dell Web site, or maybe they simply do not exist.

    So, I'm just trying to understand what card I use and how I am supposed to connect any wireless antenna.

    I opened a case of pension guaranteed with Dell and they came out to replace the backcovers by those who would have included WWAN antennas. It turned out that the backcovers were the same as those that I had (Dell part number F9Y55) and does not include the WWAN antenna. More research indicates that the backcover G3D2K is one that includes a WWAN antenna, but it also seems to be able of E7440 the high-resolution LCD and Wi - GIG, which mine does not.

    I called Dell sales department to see what happens if I tried to buy an E7440 with WWAN and they told me that currently none of their configurations would include WWAN option, but they gave no explanation for this.

    I think the obvious answer is that at the time now by using the WWAN in the E7440 probably is not an option. If you wanted to buy that with the support of Wi - GIG you might at least find some wire antennas and could try to install one of the DW580x cards and see what is happening at your own risk.

    (Why is this double publication?)

  • I am looking for a card PCI UMTS for Portege M700

    First of all Hi everyone, as above mentioned in the title is on the Portege M700, I am looking for a card PCI UMTS for this model have here an 8775 Sierra lying around, but unfortunately, it is not recognized in Win7, I can time can someone tell what card for this laptop is, or even something where I could get so...?

    Thank you apologize in advance

    Hello

    You need a module 3G Broadband?

    As far as I know that some of the Portege M700 series were equipped with the 3G module I think that it s of Novatel but I m not sure leave

    However, if you need a framework for the Toshiba notebook that would be consistent for sure, the best place for the purchase of these parts is your ASP.

    Guys could check what parts are compatible and could order from Toshiba if that would be really necessary

    Welcome them

Maybe you are looking for

  • Cannot add get on them to work

    I try to download my toolbar buttons because I think it lacks. I download add ons then just create a document and does not in the toolbar. I need more customization. I want to enlarge the font, response and pass upwards. I don't see anywhere to print

  • control the order of the locations

    When I draw several waveforms, or several tracks on a XY plot, the final track is "underneath" those who preceded him.  LV 12.x, can I change the order of tracing, other that by changing the order of the elements in the table used to manufacture the

  • How to use NIDAQmx to determine the number of lines correlated DIO?

    How can I used NIDAQmx to determine the number of correlated DIO lines that supports a device?  For example, the NI6225 supports 8 correlated digital of/s lines while the NI6229 supports 16 correlated digital of/s lines.  How can I used NIDAQmx to de

  • How to open a file with the extension .odg using Vista?

    How to open a file with the extension .odg using Vista?

  • My Brother MFC-7840W is taken offline.

    My Brother MFC-7840W is taken offline. I have a wireless network using windows 7 and a cisco wireless router. A few times just go offline.  How can I get online? or why it is happening?