Should firmware upgrade on EA3500 - I do it?

Similar Questions

• 200 d IOmega IX4 Firmware upgrade failure

  Hello

  I have an IX4 - 200 d which I inherited. Initially, it wouldn't boot and display only the symbols of USB stick/network after about 60 seconds.

  With some searching on Google, I created a boot disk USB with the firmware updated on this issue. All goes well until the Firmware upgrade begins. I go to the step of (what I assume is) the upgrade of the firmware and it gets 75%, hold for 5 seconds and then the machine stops.

  I tried to repeat the update of the firmware with all the drives present, with every other drive in the first slot and with all the disconnected drives. But it seems to behave in the same way.

  Is this a known issue? Or could it be a hardware failure?

  I'm pretty eager to find a solution - it takes a long time for me to accept defeat.

  The only other suggestion that suggested Dr. Google is to start linux and reformat the hard drive?

  Any help is appreciated.

  Kind regards

  Pete

  Hi André,.

  This case can be closed.

  After the above mentioned procedure eventually work, I didn't know that - ALL readers should be present and formatted during an attempt of USB firmware update / install.

  The link again on the forum - http://forum.nas-central.org/viewtopic.php?f=14&t=4401

  This seems to be the only solution.

  Kind regards

  Pete

• The Linksys BEFSR41 V2 Firmware upgrade help

  I can't open the MacBinary (.bin) files that I downloaded from linksys, in order to update my firmware. I used my utility to archive, Stuffit Expander Mac and BetterZip, and so far none of them opens the file. Anyone have the firmware upgrade in a different format or advice on how to solve my problem.

  Do not touch the file you downloaded. The only software that uses it is your browser.

  You must open the web interface of the router at http://192.168.1.1/ and then use the upgrade of the firmware here.

  I don't know if the demo user interface is always up to date, but if it is as you should find it on the help page. See here. Click Update Firmware. Then, press the Browse button and select the .bin file that you downloaded. Then press upgrade and the browser will download the file on the router.

• WRT 160NL firmware upgrade ever end!

  Hello

  I am trying to upgrade the firmware version 1.00.01 B15 to 1.00.01 17 (the only one available on the linksys Web site). It is not allowed to turn it off or reset it. However, the upgrade progress stopped at 98% and never ending so far. Should I wait longer (another day)? Or I can just reset/power off of the it?

  Attached is a snapshot of the screen for reference.

  Thank you.

  

  The firmware upgrade process must be complete...

  Try the following steps... Press and hold the button of reset for 60 seconds... Release the reset button and unplug
  the power cable from your router, after only 30 seconds reconnect the power cable...

  Now, as do the settings of the browser on the computer... Open an IE, click Tools > Internet Options, and then delete all files, cookies, history, forms... GoTo 'Connections', make sure never Dial
  a connection is checked, click on network settings and make sure that all the options are unchecked... Once you are finished, click OK... Close IE and reopen...

  Now, try to upgrade your router firmware... it should work!

• WRT610N firmware upgrade question

  I have a simple question about the firmware upgrade.  I want to know if it's OK when the upgrade of the firmware on a wireless router for rather than press reset and rest for 30 seconds, that I connect with my browser and 'load Factory Deaults?

  I read, where they are supposed to do the thing of the SME and the method of web browser is much easier worth me.

  Can anyone confirm this or should I press the button to reset for 30 seconds?

  see you soon

  It is advisable to reset the router after the upgrade of the firmware. For once you upgrade the firmware on the router... Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now, you can re - configure your router.

• After restart of the firmware upgrade

  Hi, I need to update the firmware on my controllers PS6100 EqualLogic.

  I found the instructions on how to do it and everything seems straight forward to do so via the GUI.

  I noticed there is a necessary restart after the firmware has been applied. Does this mean I have to gracefully shutdown the virtual machines running on my SAN LUNS? My iSCSI connections will be closed/broken during the restart of the post firmware upgrade?

  Thank you, Oliver.

  Hello Oliver,.

  In the same area download notes firmware and release is another PDF, entitled ' iSCSI initiator and optimize your SAN environment for high availability operating system considerations ", which includes some key parameters that will allow your computers virtual and servers through the failover time.  It is important that not only the Firmware update, but in the case of an unexpected failure due to a failure of CM.

  More if you use VMware ESXi, there is a best practices PDF for that as well.  In addition to better manage the failover, these changes have shown to improve performance as well.

  The Tech report TR1091 is available here:

  http://en.community.Dell.com/TechCenter/Extras/m/white_papers/20434601/download

  Changes for Windows and the knots of ESXi virtual machines will require a reboot to take effect.

  What version of firmware you are at, and what version you are migrating towards?

  Other things I always propose updates is to ensure that both controllers are plugged in your switch and in the VLAN correct.  Since assets CM are failed over to the passive, support gets much advertising is unable to access the storage after firmware update.  Or ports of the day before were not in the VLAN correct, or individuals with disabilities, etc...

  It is for these reasons that personally I prefer to do the updates via the serial port CLI.   The process is more talkative, and if something should go wrong, you need the serial port of some sort.   Since the installation and tested in advance is a huge time saver.   Here, we use serial mux so that all array controllers are easily accessible.

  Kind regards

  Don

• SGE2010 - Firmware upgrade and config does not save

  Hi all

  I have a few questions, but ill start with what im trying to achieve.

  With the help of the EMS 2010 for Microsoft NAP with 802.1 x auth for access to the switch, which has led to some questions

  What I have: an EMS 2010 48 port switch firmware 3.0.0.17

  Firmware update: to ensure im not having not problems due to the old firmware, I tried to upgrade using ros_ls1_bp_ge_bx - 3020.ros to 3.0.2, by downloading the file through TFTP, the transfer is complete and that's all, nothing happens.

  Restarting the device: as part of the upgrade process, I thought I might restart, so I rebooted and found that all my settings were cleaned, as if a reset occurred... and add further pain, the backup of the settings I had taken do not appear to introduce themselves with a new request.

  NAP support: so I tested my server NPS (RADIUS) with NTRadping.exe and everything is good, however I can't the SGE2010 to talk to it... the authenticator State in the web interface is still listed as initializing... I'm not sure if it is a simple mismatch (where the attempt of a firmware upgrade), a tag that should be on the side of RADIUS or switch misconfig.

  So, in summary:

  (1) how the hell you upgrade the firmware?

  (2) why are none of my saved settings to restart the device?

  (3) if anyone one of them puts up with PAN and has all wisdom of bone beads, let me know.

  Hi Ben, once you update the firmware, you need to go to the active image, apply the second image. Restart the unit. Regarding the configuration of switch, you must save the configuration running at startup configuration

  Admin-> file management-> copy files (running at startup)

  -Tom
  Please evaluate the useful messages

• I am running Yosemite. Should I upgrade to El Capitan before moving on to the Sierra?

  I am running Yosemite. Should I upgrade to El Capitan before moving on to the Sierra?

  No you do not.  Lion 10.7.5 or higher, you're in the clear.

  MacOS Sierra - technical specifications

• BDX4350KB Wifi adapter and firmware upgrade doesn't work do not

  It is a sequel to my earlier question about if the WLM-20U2 Wifi adapter will work in my blu - ray player.

  After buying the adapter I plugged it and a message 'not supported', if I tried to connect wireless it says there was no an adapter connected.

  So I assumed that this necessary upgrade, so I formatted a 1 Gb USB drive with the FAT file system, downloaded the file level (version 39 http://www.dl.toshiba.com/player/NA/GB/EN/BDX4350KB.html) and copied the file .bin on the USB.

  When I plugged into the player and said to check the disk for a file to update it tells me that "frontend file is not found"... There was only one file to download, and it wasn't in a folder so I guess I'm supposed to just copy that file on the USB drive.

  I checked the USB port with a memory stick with photos on and it works fine.

  How to get the upgrade to work in the hope that it will enable the wifi adapter to work?

  Thank you

  Have you checked the guide in PDF firmware update?
  [Update firmware BDX4350KB | http://fget.dl.toshiba.com/manual/install/10009/Installation_Instruction.pdf?fromPid=%2Fplayer%2FN A%2FGB%2FEN%2FBDX4350KB.html&f=Installation_Instru ction.pdf]

  _ * How to upgrade the F/W * _

  (1) update firmware requires the USB of size max.2GB. Please make sure you format the Flash DRIVE to FAT/FAT32 before you start the upgrade procedure.
  ? Create a new folder on the USB drive and name it UPG_ALL
  ? Unzip the firmware file and copy it in the folder UPG_ALL.

  2) turn on the BD? Drive and make sure that you can see the player's on-screen Menu.
  ? Insert the USB key containing the Firmware upgrade file in the USB of the Blu slot? ray player

  3) press the "SETUP" button on the remote control.

  ? Select keys on the remote control UP/DOWN
  ? Symptom
  ? Upgrade
  ? USB storage device

  4) press the OK button on the remote control depending on the USB storage device.
  ? Now the upgrade file is under research. Please wait massage will appear

• A1396 iPad2 very slow 64 GB with 9.1 - should I upgrade to 9.3.1?

  Hey guys, I have an ipad 2 A1396 64 GB. I have almost 30 GB of free space, however lately my ipad is really slow.

  Should I upgrade to 9.3.1? This will make it faster? Is there anything I can do for my lucky ipad? a program to set or change?

  Thanks in advance...

  Each update, apple publishes intends to improve performance and efficiency to provide a better experience for their consumers, so in my opinion the upgrade would be better now to improve the performance my advice would be to close the applications that you do not use and restart from time to time to clear the immediate memory.

• HP Pavilion m9200t... What should I upgrade?

  Should I upgrade to Windows Vista 64-bit of Windows 7?

  Summer wrote: where can I get a DVD of Windows 7 upgrade?

  Hello summer, DVD of Windows 7 x 64 upgrade usually can be found in your local computer supply store.

  Here is the link for the specifications of your system and it shows the system is delivered with Microsoft Windows Vista Home Premium 64 - bit SP1.

  Here a link to Newegg where the operating system Windows 7 x 64 Home Premium Upgrade can be found for USD $109.00 with free shipping. Free shipping usually takes about 7-10 days. You can choose faster shipping for an extra cost options.

  This Windows 7 x 64 Home Premium Upgrade is a commercial version and comes with a free gift of Kaspersky Lab Internet Security 2012 1 user license.

  When you insert the DVD into the optical drive and boot the system, you would be presented with the option in a few screens to perform an upgrade installation. You would select just a upgrade and installation will continue and complete.

  You should then have Windows 7 Home Premium x 64 installed. If you want or need a more robust version, such as Windows 7 x 64 Pro or Ultimate, you can find these institutions, but they cost a bit more, and if you do not need the features of these versions, it would not be the extra cost.

  Whatever version you decide, you must put the enclosed certificate of authenticity (COA) on the system case and remove the Vista COA of the case. This could ensure that you are legal.

  You should also go to the Windows Update site after the upgrade and see if there are new updates for your system.

  I think it would be.

• WHEN SHOULD I UPGRADE MY SAFARI

  When should I upgrade my safari?

  Safari is automatically upgraded when you upgrade OS X.

• Should I upgrade my macbook pro at el capitan 2015? How is the performance on elcapitan? give your opinion! Thank you :D

  Should I upgrade my macbook pro at el capitan 2015? How is the performance on elcapitan? give your opinion! Thank you

  My iMac with 8 GB or RAM 2011 works very well with the 10.11.2 was last updated. It is up to you to decide. It should work perfectly on almost any new machine of 2015.

• HP pavilion g6: should I upgrade to windows 10

  Hello

  I wanted to know if I should upgrade to windows 10 or not.

  I checked my pc with the windows 10 application and he said that your computer meets all the requirements. But I wanted to know whether or not windows 10 is a stable operating system.

  When I bought my pc it ran Windows 8 and I have upgraded to windows 8.1. My pc has a few small problems since then.

  Most of them slipped, but there is a little. I have not found windows 8.1 as a stable OS, it has flaws and is not fluid.

  And if windows 10 is good, then tell me how should I update. I saw there are two types of upgrade. One is to you

  move all your files and software for windows a 10 and the other is that you start over completely. So what I should how and

  should I upgrade?

  D5GR wrote:

  @AA7,

  Hello and thanks for the display on the HP support forums.  At this point I would like to wait a few months for all the bugs to settle with the operating system and compatibility with the software and drivers.

  It normally takes a few months for an operating system to take the ist wake when dealing with hardware and software.

  Keep an eye on the support page for your laptop.  Then pass the drivers and software for windows 10 becomes listed.

  Thanks for the post and have a great day.

  You know it's a real shame that HP didn't advise people to do it before we upgraded. Now you admit that your drivers do not work with Windows 10. Bunch of idiots.

• HP 250 g4: should I upgrade the BIOS?

  HP support assistant informs: BIOS should be upgraded, but nothing has been done during the night.

  I tried to update manually, but in vain.

  Can I still update or whatever? )

  If Yes, give me ftp link, pls.

  PS. HP support assistant does not recognize Bluetooth and Intel MEI: I had to manually install.

  You must install an update to the BIOS if it provides a fix for a specific problem, you may have or if it adds a feature that you need. None of these cases, it is best not to install the update.

  HP 250 G4 Notebook System BIOS Update (Intel processors)

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation