Should I be defragmentation PQ Service and system reserved?

Similar Questions

• An empty Partition and system reserved Partition

  Currently I have windows 7 and wanted to do a multi boot with Linux. I was looking at my system partitions and I drive C: and partition 16 GB vague and empty, a system reserved partition. What do these and I have to do something with them before attempting to create the multiboot?

  Hello

  Scores of recovery to reinstall the operating system to a new State are normally between 5-19GBs.

  The system reserved partition, you touch not;

  http://www.howtogeek.com/192772/what-is-the-system-reserved-partition-and-can-you-delete-it/

  This partition contains two important things:

  • The Boot Manager and Boot Configuration data : when your computer starts, the Windows Boot Manager starts and reads data from the start of the Boot Configuration database (BCD). Your computer starts the bootstrapper on the system reserved partition, and it starts Windows on your system drive.
  • Start-up files used for BitLocker Drive Encryption: if ever you decide to encrypt your hard drive with BitLocker Drive Encryption, the system reserved partition contains the files needed to start your computer. Your computer starts the system reserved partition unencrypted, and it will decrypt the main encrypted drive and start the system encrypted in Windows.

  See you soon.

• Disk Defragmenter could not start the service task scheduler is not running. Start the Task Scheduler service, and then try again.

  im getting this message if I want to run Disk Defragmenter... "Disk Defragmenter cannot start the Task Scheduler service is not running. Start the Task Scheduler service and try again. "tried to start the Task Scheduler on services.msc, but it gives me the message" windows could not start the Task Scheduler on the computer local error 2: the system cannot find the file specified. '. »

  Hello

  See if run the checker (SFC.exe) system files using the parameter/scannow help.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:
  http://support.Microsoft.com/default.aspx/KB/929833
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• use of iPhone time data system Services and location

  Since last month, data use under Services system-> time and place has increased "substantially." It's pretty evenly half my data use, whatever I do. I have not added new applications or use the phone differently I have in the previous months.

  I use a tracking, human application, but even if I turn off mobile data for her and use of data in the time and the place continues to be half of my mobile data.

  How can I start troubleshooting? I have read the discussions here and off mobile data and background update and synchronization for most things. This has reduced the use of the data, of course, but the time and the place continues to be half of my data.

  I'm on a 1 GB plan, that was a lot, now I close out maxxing when I don't care.

  Hi branches,

  Thanks for checking out the Apple Support and communities for the detailed information of what is happening with your data in time and place. I can understand wanting to make sure that you are able to easily manage your usage data and wanting to know which application is causing this additional use.

  Since you have already completed these steps, I recommend you to disable the location Services for all of your applications, and then turning them back on one or two at a time, as needed, to help determine what applications likely to use your location. You can disable the location for applications and services system with these steps.

  Enable or disable location Services. Go to settings > privacy > location Services. You can turn it off for some or for all applications and services. If you disable location Services, you are prompted to activate again the next time, that a service or application attempts to use it.

  Disable the location Services for system services. Several system services, such as the calibration of the compass with geolocation of ads, using location Services. To see their status, activate them or disable, or display the location Services icon in the status bar when these services use your location, go to settings > privacy > location Services > System Services.

  You can find the steps listed above in the iPhone user guide.

  Privacy - iPhone

  You can also find additional information about the parameters of your privacy and location in this article.

  On privacy and location-based Services - Apple Support

  See you soon!

• Shared services and the workspace URL do not work in the EPM 11.1.2.2 system

  Hello
  Shared services and the workspace URL do not work in the EPM 11.1.2.2 system
  I installed the EPM V11.1.2.2 system in the single server environment (MS 2008 Server R2) with the following components:
  * Foundation Services
  * HFM
  * FDM
  
  Have used embedded Weblogic server as a web application server and Oracle HTTP server as a web server. The installation was successful.
  During configuration.
  (1) I selected the option to deploy applications web SSP and workspace to a single managed server. Applications deployed successfully at EPMServer0.
  (2) in addition, I have selected to configure Oracle HTTP server as a web server.
  These two steps were successful.
  
  But shared services and the workspace URL do not work. We get a 404 error.
  Shared services: http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
  Workspace: http://inmum01hyp05.internal.vodafone.com:19000 / workspace /.
  
  When I checked the EPMServer0, Weblogic administration console is in SHUTDOWN State, tried to start it but it goes by State ADMIN instead of RACING.
  Checked the newspaper EPMServer0 to 'D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs' and found the error at the end of this message.
  
  Can someone please suggest a solution for this.
  
  # < 6 June 2013 11:43:20 IST > < emergency > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200246 > < BEA-149259 > < server 'EPMServer0' 'EPMServer' is high in the State of the administration due to the failure of the deployments. >
  # < 6 June 2013 11:43:20 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200902 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceHttps for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceJms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseService for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201106 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Jms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12 for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Https for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebLogicServer > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201137 > < BEA-000256 > < Invoking weblogic.transaction.internal.StartupClass.main (null) >
  # < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149059 > < dms.war request DMS Module [Version = 11.1.1.1.0] changes from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149060 > < dms.war DMS [Version = 11.1.1.1.0] request Module successfully go from STATE_PREPARED to STATE_ADMIN on server EPMServer0. >
  # < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149059 > < inspection.wsil STATE_PREPARED request Module, wsil-wls is transition to the STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149060 > < inspection.wsil request Module wsil-wls successfully moved from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:44:13 IST > < Info > < Diagnostics > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1370499253433 > < BEA-320000 > < Diagnostics of the subsystem initializes on the server EPMServer0. >
  
  Thanks in advance.
  TEJ

  Hi all.

  Thanks for all your useful contributions.

  Finally, the reconfiguration is successful.

  Yes John, the problem was with the deployment, but was not able to understand what goes wrong with the deployment.

  Tried to uninstall clean twice with the deletion of registry. Last updated variable of path by removing all entries related to Hyperion during the uninstall.

  Installation and configuration was successful after that. In addition, I did not compact deployment this time and used separate web servers to the deployment.

  Finally, Shared Services and the workspace URL work correctly.

  http://servername:28080/Interop/index.jsp

  http://servername:28080 / workspace /.

  Kind regards

  TEJ B

• What should I really in my services/processes in Task Manager under/Auto/stopped running?

  Is there a list published somewhere that tell what should be executed, auto or at the stop in the services or processes. Mine for some reason the other day came out and I had to go through all of them and quess what should be on and why since I have never really used another account on my Pavilion 9700 vista 32 bit when I check the see all users, it triple the size of the services and processes? Can someone help me with this, as I've lost all my system tools in my programs/accessories/tools system and a few other things in my programs I read could be of a registry cleaner. I had system mechanix for about a year but I didn't notice the tools gone until after it expires some time? Can anyone help please? Thank you.

  Hello

  There may be no problem that many Services start and stop on request so everything can be normal.

  Start - type in the search box-> control of the superior and right click on - RUN AS ADMIN.

  Or Control Panel - Administrative Tools - Control Services.

  To check the default settings for Windows Services:

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Critical errors dealing with MRT.exe and error messages "Services and controller app has stopped working".

  I get two error codes... "Services and controller app has stopped working" and "Windows has encountered a critical problem and will restart in a min. Please save your work." The only time where it does it but when I plug my cable network. Already ran sfc and found nothing. Ran malwarebytes and removed a lot of viruses, I picked up, but I think that something in my registry can be screwed up after trying to remove the said virus. I was getting some kind of error MRT.exe and I tired looking for things to the top on this but I think I can have messed up a registry that was loaded entry of this and it has damaged something.

  Someone at - it answers that do not involve me having to reformat and install a new OS. I bought the computer off of a friend and it's a custom-made computer, so I don't have Vista Disc... while hoping a good solution.

  Help me please! :)

  Thank you
  Bishop

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you do not have a DVD of Microsoft Vista, borrow one from a friend.

  Read this tutorial on how to do a repair installation:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Regarding the relocation:

  You can borrow a suitable Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

  See you soon.

  Mick Murphy - Microsoft partner

• Error 17-Windows will not load past the splash screen, and system repair has no effect...

  Hi all, my problem is the following. Off my laptop the night before, an upgrade has been installed as usual. However, when I tried to start my computer the next day, I was meeting with a choice of operating systems, one was vista and one was something called "openSUSE 11.2 installer (NET).» Of course I wanted to choose vista, but when selected has been sent to a screen that read (sorry for the amount of the entry).

  Start "openSUSE 11.2 installer (NET)".

  (hd, 1)

  Specifien type is ntfs, partition type 0 x 7

  /openSUSe/ kernel linux devfs = mount, dall ramdisk_size = 65536 = ftp install: //ftp4.g wdg.de/pub/opensuse/distribution/SL-OSS-factory/inst-source/ server = ftp4.gwdg.de lang = en splash silent vga = 0x31A

  Error 17: File not found

  I don't know much about this sort of thing, so he thought better to include everything I could. At first, I tried to reload Vista, but it just opened the same screen, so found the vista disc that came with the laptop and it is stuck in. I ran sytem repair and system restore and both have had no effect.

  I'd appreciate any help is sorting this point, but if I have to reinstall vista (what I hear the hard disk wipes), is it possible to backup all my files to be reintergrated later.

  Thanks for any help!

  "Off my laptop the night before, an upgrade has been installed as usual."

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, please include Error Codes, including what you have already posted, andexactly what happens after you tried to update.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• My weather Gadget, Disk Defrag and system restore ALL stopped working... Help!

  My weather Gadget on my desktop has stopped functioning completely... How can I fix?

  I also noticed a big 'slow down' in my recent persormance system and decided that I could

  you will need to run my Disk Defragmenter.  He worked 8 hours and barely made

  any progress... While they inspected the date last run Disk Defragmenter, he showed

  Almost 6 months ago, but I don't know I was manually run once a month, MORE, check

  my task manager, it shows that I automatically have it configured to run EVERY week at some point.

  So, I renounced the defragmentation and decided I had to try to perform a system restore, BUT when I

  Open the system restore... He said, ALL my Restore Points have been removed or deleted.

  It's crazy!   Help, please! What can I do to solve all these problems?

  Hi Barbara,

  Thanks for choosing Microsoft Community Forums.

  According to the description, it seems that you are facing problems with the Gadget, calendar, disk to defragment and system restore. I will certainly help you in this matter.

  (1) did you do changes on the computer before this problem?

  For Windows Gadgets:

  I suggest you to follow the steps from the link and check if the problem persists.

  Gadgets Windows 7 can not work or be displayed properly

  http://support.Microsoft.com/kb/2515657

  For the slow performance:

  The resolution of performance problems check issues that could slow down the performance of your computer, such as how many users is currently connected to the computer and if multiple programs are running at the same time.

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  If the problem persists, I suggest that you put the computer in clean boot mode and check if the disk defragmentation and system restoration.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual.

  Windows Vista and Windows 7

  1. Click Start, type msconfig.exe in the Start Search box and press ENTER.
     If you are prompted for an administrator password or for confirmation, you must type the password or click continue.
  2. On the general tab, click the Normal startup option, and then click OK.
  3. When you are prompted to restart the computer, click restart.

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• I found this in my log files 26 July 2016, 22:55:18 com.apple.xpc.launchd [1]: the appellant attempted to divert the service: path = System/Library/LaunchAgents/com.apple.pluginkit.pkd.plist, calling = loginwindow.6205 what that means?

  I found this in my log files 26 July 2016, 22:55:18 com.apple.xpc.launchd [1]: the appellant attempted to divert the service: path = System/Library/LaunchAgents/com.apple.pluginkit.pkd.plist, calling = loginwindow.6205 what that means?

  Just a log message system that does not mean nothing, except an engineer. If you don't know what mean the entries in log file, and then save your time and forget about unless you have serious problems.

• How to enable web services and search for printer email address

  I am trying to sign up for the monthly INK from HP.  As part of the application, they ask me a CODE.  However, I can't CODE because I am advised that my Web services are not enabled.  How to enable Web services so that I can complete my application?  Thanks for any help you can offer me.

  Hello

  What model of printer you have?

  Assuming your eprint-enabled printer, please follow the steps below to connect to web services and get your email from the printer.

  To find printers e-mail you need to enable web services from the front panel of the printer. It is normally a button on the front panel or an option in a menu.

  The printer will be connected to your WiFI network, and once the device is activated, it should display a page with a code composed of letters and numbers. It is the e-mail address of printers (when you add a @hpeprint.com to it).

  Once you have this, go ahead and configure a connected HP account and register the printer to your account. This will allow you to manage settings of the ePrint printer but also to track the history of the work.

• Update the BIOS and system health report question

  I have two questions to ask you.

  1. I just bought a Quad DV6T-7000 a month ago. I'm unable to create a report of health system through the control panel > performance & information > advanced tools > generate system health report.  I get an error saying "cannot run" with no other information. It apparently came from HP in this way. Something has been corrupted? I have configured my laptop the way I like it and have installed all programs and applications of my previous laptop, so I hope that I don't need to do an installation of windows 7 to fix this. It is not really important. But it should work.

  2 HP Support Assistant automatically installs updates to bios, or is it something that has to be done manually? I am currently set to auto critical or important updates. There is an update of the bios (f.22 I think) available for my Pavilion DV6T - 7000 Quad Edition, however, I am wary to update my bios given the many problems that people have after doing an update their bios.  So far, HP support Assistant has not notified me of the update and I have problems with the problems it addresses. Should I be worried?

  Thank you, appreciate your making this feature expert day!

  CRS says:
  

  I have two questions to ask you.

  1. I just bought a Quad DV6T-7000 a month ago. I'm unable to create a report of health system through the control panel > performance & information > advanced tools > generate system health report.  I get an error saying "cannot run" with no other information. It apparently came from HP in this way. Something has been corrupted? I have configured my laptop the way I like it and have installed all programs and applications of my previous laptop, so I hope that I don't need to do an installation of windows 7 to fix this. It is not really important. But it should work. , You can run the System File Checker to see if there are problems of file system.  Open a command prompt with admin permissions and type sfc/scannow, and then on enter. The files of your operating system will be inspected and the files that are supposed to be corrupted or damaged will be replaced with fresh copies of the repository own Windows file.  If this does not resolve the problem, then I suggest that you run Windows update. There may be an update that resolves this problem

  2 HP Support Assistant automatically installs updates to bios, or is it something that has to be done manually? I am currently set to auto critical or important updates. There is an update of the bios (f.22 I think) available for my Pavilion DV6T - 7000 Quad Edition, however, I am wary to update my bios given the many problems that people have after doing an update their bios.  So far, HP support Assistant has not notified me of the update and I have problems with the problems it addresses. Should I be worried? I recommend not updating the BIOS if everything works. Updated the BIOS, just because you can, this is certainly an adventure risky for most people.

  Does your laptop have a UEFI environment.  This in fact safe update the BIOS if you decide to do.

   

  You can set the HP Support Assistant to install updates or to notify you when updates are available.

  I recommend that you do not set automatically update anything. My preference is that the Windows operating system and the laptop / desktop only doing what I want to do and when I want them to... That way I don't get surprises not unexpected and mysterious death blue screens or black screens.

     

  Thank you, appreciate your making this feature expert day!

  Greetings from nest,

  ERICO

• error 1321: NTauthority or Services and controller app sez he has a problem and the computer shuts down

  sez no authority trying to run AVG or Malwarebytes - every 1/2 hour or if some "prog system? NTauthority or Services and controller app sez he has a problem and the computer shuts down

  Hello

  • What is the full error message?
  • What were the changes made to nfore this question?
  • What exactly do you mean by "no authority running avg or malwar bytes?
  It's a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.

• driver and system restore problems.

  When I turn on my computer it say the perimeter is incorrect. the black screen appears and flashes at the top saying c: Windows system32i need help because I can not restore the system have already tried. more I want to know if the "lodge" and other protection against the virus is the cause. I had the i had the mcafee and someone had to work on my computer and they took off my mcafee and put their own on. now I cnt download my mcafee it will not read it. does nothing. so I dnt want to take protection I cuz I dnt want to liquidate without any. Finally, I can't even install or open any cd rom I have cuz of this problem on my computer. Help, please

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. what anti-virus software is installed on the computer now?
  4. What is the accurate and complete error message that you receive at startup?

  Step 1: Search for the issue in the clean boot state.

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Step 2: Try the fix tool from the article below to fix the CD drive question.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• Disconnect a session from the Terminal Server Services causes system hiccups.

  Dear reader,

  We noticed some undesirable in MSTSC behavior when a network connection drops during a session-MSTSC to a server. What happens is that when the user is disconnect from the remote session due to network connection dropping, the entire system freezes for a few seconds, making the communication on other physical cards within this same remote device which are not affected by a network connection cannot fall.

  In order to reproduce that we run several tests on the following versions of windows using various equipment:

  • Windows 2003 Server Standard Edition
  • Windows 2008 Server R2
  • Windows XP

  Tests were performed on both physical and VMWare virtual servers. All systems are equipped with at least two physical ethernet adapters on different IP networks.

  During the test, we put a MSTSC connection to windows server during the first card (A) on this server. On the other (B) ethernet card we have implemented an application to communicate to a client on another machine, sending simple messages every second and receiving responses.

  When we pulled the ethernet adapter cable has and in doing so, disconnected the MSTSC, the communication on the ethernet B card connection would fail aswell for a few seconds.

  Is this a known issue? And in such a solution?

  RayZ001,

  Thank you for visiting Microsoft Answers!

  The question you have posted is related to Terminal Server services and would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:
  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.