should I framewrk net 4.0?

Similar Questions

• Where should I install Net Framework V2.50727

  I need to contact an application Publisher for instructions about obtaining the appropriate Net Framework version. V2.50727

  Where and who is a publisher of the app for V2.50727

  This isn't my area of expertise, so my help is limited.

  Download the .NET Framework version 2.0 here.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=19

  After installation, restart your machine and check Windows updates and see if there are any new updates. Updates, it will bring to V2.50727

• Satelliite Pro A210 and Win7 - things do not work!

  Okay, don't know if this should be a net of windows 7 or a net 210...
  I did a fresh install on my Satellite Pro A210.

  Since that time - my broadband speed was terrible! Less than 0, 5Mbps on a 10 Mbps line. My XP wireless device gets very close the 10 Mbps... so I know that the issue is not the mobile device. The satellite pro was working fine with vista.

  I followed the guides of Toshiba on the 'how' and used their tool (which did not work as he said my bios was not windows 7 or the pc is not a Toshiba machine!).
  I have 3 elements in the device manager that have no drivers and I have no idea what they are.

  Can anyone please help me or direct me to a reliable source for the drivers so I can get the machine running at full capacity again?...

  Hello

  Can you please tell us more about installing Win7?

  Did you do makes Vista Win7 upgrade or clean install Win7 using Microsoft installation disc?
  Use of the 32-bit or 64-bit version of the OS?
  Have you checked Toshiba support page to see if your mobile phone is supported for some version of Win7?
  Have you installed all the drivers available, tools and utilities?

• H/P 5610: printer problem

  Printing text on the internet is so light that it unreadable. Printing from the computer and using the copy is ok. I can e-mail prnt, it's a bit darker and more readable.  Are there any settings that I have czn amendment to correct the problem.

  Hey @jimcack,

  I'm sorry to hear that resettlement was no difference to the internet print quality.

  Because each document prints correctly, with the exception of web pages there is no chance that it's your hardware printers affecting this quality. Just to check the hardware on your printer one last time, I'll have to print you a diagnostic quality report.

  1. Press the left arrow and right arrow at the same time on the front of your printer, and then release the two buttons.
  2. Press 1, 2, and 3. The Service menu appears.
  3. Press the right arrow button twice. The special reports menu opens.
  4. Press OK.
  5. Press the right arrow once. Opens the menu of the print cartridge .
  6. Press OK. The diagnostic page prints.

  

  1. printed by the right cartridge

  2 printed by the left cartridge

  This report should print with net and black colors that there are no problems with your printer. Therefore, we can try another driver on your computer to see if that fixes the problem with printing from the internet. If this report is printed with quality problems, don't spend troubleshooting at the moment.

  How to add another driver:

  1. Open your screen Startup by clicking the Windows button in the lower left corner of your computer screen or by selecting the Windows key on the lower left of your keyboard to the right of the Ctrl key.
  2. In the screen type start "devices and printers
  3. In the devices and printers folder right click on your printer all-in-one HP Officejet 5610 and left click on printer properties
  4. Left click on the Advanced tab
  5. Left-click on new driver
  6. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  7. Select HP as the manufacturer on the left
  8. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  9. After selecting Deskjet 9800 hit Next to complete the wizard driver new
  10. Under the printer properties window, select "Apply", but don't hit not OK
  11. Select the general tab
  12. Rename your all-in-one printer, HP Officejet 5610 printer
  13. Click OK
  14. Finally, right click on your printer all-in-one HP Officejet 5610 one more time and left click on Printing Preferences
  15. Left click on the paper/quality tab
  16. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
  17. Press apply and OK

  Now that the other driver has been added, please test printing from a Web site again.

  Please let me know if these steps don't resolve your problem. Good luck!

• Satellite P30-109 works to power when the AC adapter is plugged

  When I unplug the plug charger, it automatically goes to the battery: so far nothing wrong with it;
  The point is that when I have the rear the charger plug into the socket on the battery until when, after about 20 minutes remaining with the high performance plan, begins to 'pip' (less then 10% battery) and goes into 'coma '.

  Normal discussion it should go on net power and automatically fill the battery

  Just after I stopped it, I disconnect the battery and reconnect it, then it starts to load again.

  The battery is not new, according to Everest 65% usage level; It takes 20 minutes at this time for me more than enough. I just need to move the pc from one room to another for a presentation.

  Although I wouldn't use the battery I still have a question: the cap on the back of the laptop is not really tight: sometimes he loses contact: without battery, it would be abruptlly pass.

  Hello

  Looks a bit like an electronic power supply problem
  I put t think she s adapter connection an AC loose. It looks more like a motherboard problem

  One question; What version of BIOS that you use?
  Please check if the latest version of BIOS is available and if necessary to update.

  Hope it helps, if not then a few portable tests are required.

• When trying to install XP sp3 receive error message "access denied."

  @meisj0n: to avoid confusion, please start a new thread about your specific problem and your computer.  Indicate your IE version and the full version of Windows (for example, WinXP SP1;) Windows XP 64 - bit SP2) in your first post.  Thank you. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  Sorry about that: P I see that you are in a large number of forums. has been through a lot of things yesterday. nothing has really worked. Yes, info on the comp IE 8.0.6001.18702, since a recent updated Version. Works fine now after using default automatic updated the first couple times. CPU: Intel (r) Pentium (r) 4 CPU 2 .80GHz motherboard: Dell (0F5949) RAM: 510 mb Hard Drive: 74 GB (ST380011A) graphics card: NVIDIA GeForce FX 5200 XP: Microsoft Windows XP (2600) Service Pack 2 32-bit

  Hi Robear,

  I'm having a problem with the installation of SP3 for XP Edition family. I have no updated two years ago because all updates have been making my computer lag (and I have them turned off).

  Now, I tried to be diligent and save my computer died. Latest things I've done included installation COMODO System Cleaner and the task of the clean computer. In regards to SP3, I get an error saying: access denied. I tried following this thread: http://support.microsoft.com/kb/949377/. Did not work. I hope that http://support.microsoft.com/kb/950718/en-us will work:

  In addition to this problem with SP3, update in C:\Windows\SoftwareDistribution log shows that I was not able to install Microsoft .NET Framework 3.5 Service Pack 1. I read everywhere, but still don't really know if I should update the .NET framework. currently have versions 1.0.3705, 1.1.4322 and 2.0.50727. Thank you very much

  (And Norton) McAfee applications are known to not uninstall (or upgraded) themselves.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool:http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. If IE7 or IE8 installed, reset IE by http://support.microsoft.com/kb/923737.

  6 reset Windows Update by...

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer (32-bit) only; Run the difficulty in DEFAULT and AGGRESSIVE mode]
  http://support.Microsoft.com/kb/971058

  7. restart & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If still no joy, there is a good chance that you see the effects of a hijackware infection!

  NB: If you had no installed anti-virus application or subscription has expired * when the machine was first infected * and/or your subscription has expired since and/or the machine is not kept fully corrected in Windows Update, don't waste your time with any of the following: Format & reinstall Windows.  A repair install won't help!

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

  2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

  2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

  3. now post the logs required in a forum appropriate for support by an expert in the field. DON'T SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update KB951847 moved

  I have vista basic and have tried and tried to get this update to install - I get error 80070BC9
  I tried to restart the computer, and install it without other updates, but it does not work
  Any ideas appreciated, thank you

  Hello Reb1313,

  Method 1:

  There are a few things that could cause this problem, try the following steps in the first place.

  1 open Administrative Tools by clicking the Start button, click Control Panel, and then clicking Administrative Tools.

  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3 right-click the Windows Update service, and then click on stop.

  4. click on Start, then click all programs, then click Accessories, and then right-click on command prompt and choose run as administrator.

  Type:
  net stop wuauserv
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 c:\windows\system32\wucltux.dll/s
  regsvr32 c:\windows\system32\wudriver.dll/s
  regsvr32 wups2.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 c:\windows\system32\wuwebv.dll/s
  net start wuauserv
  output

  Restart the system and see if it can be updated now.
  If this does not resolve the issue you can also try to repair the BITS service by following the below article:
  http://support.Microsoft.com/kb/940520

  Method 2:

  Download the .net Framework removal tools "dotnetfx_cleanup_tool.zip" from the link below
  http://blogs.msdn.com/astebner/attachment/8904493.ashx

  Run the tool and you should only remove this version for which you receive error code. (i.e. you should only remove .NET Framework 3.5 & its application solutions packs)

  Then, restart your computer and manually install the following updates in the order
  (1) package Microsoft .NET Framework 3.5 from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4e35-B531-508D977D32A6&displaylang=en

  (2) Microsoft .NET Framework 3.5 Service Pack 1 from the following link:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ab99342f-5d1a-413D-8319-81da479ab0d7&displaylang=en

• Microsoft update error 3701

  Hello
  I am running vista 32 bit, I tried to update, but I got the error 3701. You have any suggestion to solve the problem please?

  Thank you

  Hello kar Natassa,.

  Method 1:

  There are a few things that could cause this problem, try the following steps in the first place.

  1 open Administrative Tools by clicking the Start button, click Control Panel, and then clicking Administrative Tools.

  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3 right-click the Windows Update service, and then click on stop.

  4. click on Start, then click all programs, then click Accessories, and then right-click on command prompt and choose run as administrator.

  Type:
  net stop wuauserv
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 c:\windows\system32\wucltux.dll/s
  regsvr32 c:\windows\system32\wudriver.dll/s
  regsvr32 wups2.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 c:\windows\system32\wuwebv.dll/s
  net start wuauserv
  output

  Restart the system and see if it can be updated now.
  If this does not resolve the issue you can also try to repair the BITS service by following the below article:
  http://support.Microsoft.com/kb/940520.

  Method 2:

  Download the .net Framework removal tools "dotnetfx_cleanup_tool.zip" from the link below
  http://blogs.msdn.com/astebner/attachment/8904493.ashx

  Run the tool and you should only remove this version for which you receive error code. (i.e. you should only remove .NET Framework 3.5 & its application solutions packs)

  Then, restart your computer and manually install the following updates in the order
  (1) package Microsoft .NET Framework 3.5 from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4e35-B531-508D977D32A6&displaylang=en

  (2) Microsoft .NET Framework 3.5 Service Pack 1 from the following link:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ab99342f-5d1a-413D-8319-81da479ab0d7&displaylang=en

  (3) now, download & install .NET Framework 3.5 Family Update (KB951847) x 64

  I hope this helps.

  [If this post can help solve your problem, click on the button 'mark as answer' or 'useful' at the top of this message. [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  --

• Update for Windows XP and Office 2000 Premium question

  Original title: issue of the update for Office 2000 Premium and Windows XO

  If I have Office 2000 Premiun and Windows XP should update Microsoft .NET Framework 4 Client Profile for Windows XP x 86 (KB982670)?

  Hello

  -Are you facing problems with the installation of the update of Windows?
  -If so, what error you get?

  Microsoft .NET Framework are very essential for the programs to run efficiently on your computer. I suggest you keep your computer up-to-date with the latest Windows updates.

  If you have problems with the installation of Windows updates, follow the steps in these articles.

  http://support.Microsoft.com/kb/822798
  http://support.Microsoft.com/kb/943144

• I get the error code 8007005 when downloading updated 951847

  I get the error code 8007005 when downloading update 951847. It produces about 60-70% of fact. I tried a few times and still nothing. I have an Acer Aspire M5620 running Windows Vista hope first Edition, SP1. I use the automatic updates. I tried following the instructions on changing permissions, but I do not have the same path as in the answers here. He said that this is an important security update. Any help appreciated.
  I tried to use Mr. FixIt and he could not run the error code giving 2838

  Hello Redbiker_co,

  Method 1: -.
  Please download Windows Installer CleanUp utility from the link, below
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  After installation, run the tools by clicking Start--> Programs--> Windows Clean up.
  On the inside of the window, you will see different installed versions of the .NET Framework. You should choose & Remove only that versions of the .NET Framework, that fails to deploy every time-for which you receive error code. (i.e. you should only remove .NET Framework 3.5 & its application solutions packs)

  Then, restart your computer and manually install the following updates in the order
  (1) package Microsoft .NET Framework 3.5 from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4e35-B531-508D977D32A6&displaylang=en

  (2) Microsoft .NET Framework 3.5 Service Pack 1 from the following link:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ab99342f-5d1a-413D-8319-81da479ab0d7&displaylang=en

  (3) now, download the KB951847 patch manually.

  Method 2: -.
  Error code: 8007005 means of problems with permissions. Please perform the procedure below

  Run cmd.exe with administrative previlliges (right click on this file as an administrator)
  and type: secedit/configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose

  Now restart your computer & try to visit the Web site updated Microsoft or try to download the file manually from the link below

  If no help verify the steps using the link below
  http://update.Microsoft.com/microsoftupdate/v6/showarticle.aspx?articleid=13&ln=en

  [If this post can help solve your problem, click on the button 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  --

• MMC could not create the snap.

  Whenever I am trying to change some local security policies I get this message, "MMC could not create the snap" and I can't navigate any further. How can I fix?

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        What is the exact error that you are experiencing?

  I suggest you to check in the event viewer for error logs and let us know the error. Follow the steps mentioned in the article below.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  For the snap to work properly on the system, you should have the .net framework is installed correctly on the system. Check in the installed updates, what version of the .net framework is installed on the system and whether it is installed correctly.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  I suggest you follow the steps mentioned in the article below.

  http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/dbd9c44d-629C-4188-9d77-7a9a7e5c6244

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Boots of Vista up - completely unresponsive apps/accessories

  Laptop computer Lenovo Vista boots / restarts correctly and shows apps and accessories.  but none of the apps or accessories react when clicked.

  virus?  or another somethiing?

  laptop is in Lexington KY with my daughter.  should what course of action I take to find a qualified expert to work on it?

  You should always update the Malwarebytes program on YOUR device.

  Try this;

  Do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  Unless you have a wireless connection to the Internet, you should have the Net.

  See you soon.

  Mick Murphy - Microsoft partner

• Microsoft Network Framework 3.5 SP1 vs 1.1 and deleting damaged file ActiveX problem

  Hello.  I am running Windows XP, SP2.  Until today, I had MS Network Framework 3.5 SP1 and 1.1 is installed, but due to problems with the download of update 1.1, I deleted 1.1 to reinstall a working version but I wonder if I still need 1.1, since I'm already running 3.5 SP 1?

  Also, I have a damaged ActiveX file in my Windows/Downloaded Programs directory named, {E2883E8F-472F-4FB0-9522-AC9BF37916A7} files that it references seem to be missing and it is damaged, but I can't remove it from my laptop, using all the utilities to Delete, cut or cleaning included with Vista.  What can I do about it?

  Hi Dean Erickson,

  You can install .net Framework 1.1 only if prompted by windows updates. Windows updates will decide if your computer requires 1.1. You should not install .net 1.1, unless you are invited to.

  You cannot delete ActiveX controls that you have downloaded and installed. You cannot delete ActiveX controls were pre-installed or modules of any kind, but you can disable the. To delete an ActiveX control that you have installed, use the add-on Manager. If the add-on cannot be removed in Add-on Manager, you might be able to uninstall it through the control panel.

  To delete ActiveX controls you have installed Internet Explorer 7

  1. Open Internet Explorer by clicking on the Start button and then about Internet Explorer.
  2. Click Tools , point to Manage Add-ons, and then click enable or disable add-ons.
  3. In the Show list, click downloaded ActiveX controls to display all ActiveX controls.
  4. Click the ActiveX control, you want to disable, and then click Remove.
  5. Repeat step 4 for each module you want to disable. When you are finished, click OK.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-Add-ons-frequently-asked-questions

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows Update fails, "returning changes" hangs forever

  I seem to have bricked just computer from a friend, unless someone has an idea what to do.  This morning, I got it innocently install 108 updates.  Towards the end of this afternoon she called me to say that the computer had asked to be restarted to complete the update, and it did.  When it restarted, he began the configuration, and then failed.  He said it was back of changes, only not to turn it off and then just hung there for 5 hours.  I came to watch once again, rebooted, it (Yes, I thought was not any returning at this point), I tried booting in safe mode, but it's always the same thing - try to install an update, fails and says that this recovery changes everything as before and then it just hangs.

  I tried the system restore on three different restore points, which always goes down with a 0x800700b7 error code.  I can reboot into safe mode command prompt, but then what to do?  The computer does not restart normally.  I looked at a few threads here, but everything seems to be doing an update failed to succeed - in Windows.  I can't get into Windows.  I can't do anything but try the safe mode or watch the blue screen that says that it is.  Please - what can I do?  Other than reinstall Windows and start over (and she needs to be able to save about 400 GB of files before I can do it - so I don't want to do).  Thanks for any help you can provide

  Software don't not brick a PC.  At worst, you need to back up files, run of the mill recovery or make the superior Clean reinstall Windows 7 that if it has not been done before would be a big improvement since it seems that the OS is corrupt anyway.

  In Safe Mode, type services.msc in start search, disable the Windows Update agent.  Make it work for a while with a few reboots, then turn it back on and set to Windows Update "Check for Updates but let me decide which install."  Install the updates in small groups and if necessary use the Restore Point it creates.

  I think due to problems with the restoration of the system which should be the net of security here, I would first run the scans of the infection, SFC and if necessary a repair of steps in troubleshooting for Windows 7 installation to check during the installation.

• 3DES with BB?

  Hi all

  I hope that it was a great weekend!

  Currently, I am implementing the triple encryption on blackberry. Please is there all the API calls or anything like that which could be useful for me? Everything I need to know? Any random same information would be appreciated.

  Thank you

  Dan

  http://www.BlackBerry.com/developers/docs/4.5.0api/index.html

  All classes of encryption should be here: net.rim.device.api.crypto. *.

  If she's not here, it is not available. You can see the last API (5.X) too.