Should I replace logic board or cable hard drive? MacBook Pro 13 mid 2012

Similar Questions

• I reformatted my Macbook Pro (13', mid-2012). I want to use Boot Camp to create a partition for use Win 7 I had previously and have drives. Then go to Win 10. Where should I start?

  I reformatted my Macbook Pro (13', mid-2012). I want to use Boot Camp to create a partition for the use of Win 7, I had previously, and have records. Then go to Win 10. Where should I start?

  You can start here

  Use Bootcamp to install Windows

• Question of replacement for the hard drive MacBook Pro Late 2008

  Hello

  My MBP HD headed to the exit so I'll take the plunge and get a replacement SSD to install it.  Being not too tech savvie I'm trying to cover all the bases before starting the replacement so I think I'm OK to get to the old and a new one outside.

  I read that a clean install of Mac OS X is recommended.  The plan is to install the new SSD and connect the old HD the MBP for a speaker for the migration of files once the SSD has been formatted and installed operating system.  One of my questions is what OS can / should I install in the first place on the new SSD.  I have the Leopard installation disc that came with the MBP, I also have a Snow Leopard install disc I bought (this is the version 10.6.3).  Start with the Snow Leopard disc or do I have to install Leopard first?  I would get the new OS SSD up to version I'm currently on (10.7.5).

  My other question is around RAM.  As part of the upgrade, I plan to replace and max of RAM, I've seen is now 8 GB between the two slots.  I read what the maximum capacity to 8 as part of an update of the firmware.  So the question is: should I do all updates of OS before installing the RAM?  The MBP would difficult treat 8GB if the firmware update is not installed through the different software updates that will be needed once the OS is installed on the SSD?

  Advice/suggestions appreciated.

  See you soon

  J

  Replace the RAM can be done at any time. If you have already downloaded the firmware required, it has already updated your material and will not be lost when you replace the hard drive. However, according to Apple, your computer can manage only a 4 GB. I could be missing something...

  See here: MacBook Pro (15-inch, Late 2008) - technical data sheet

  As far as your OS issue, the best thing to do is get the updated software to match the information that you are migrating back (to make sure no problem with migration). The best way to do it, is to download recovery disk wizard and install it on an extra USB key. This allows you to install Lion without having to install Leopard or Snow Leopard first. This will also use disk utility to format the new SSD correctly.

  DOWNLOAD: OS X Recovery Disk Wizard v1.0

  How to: OS X: on Recovery Disk Wizard - Apple Support

• Pass water damaged hard drive Macbook Pro (mid-2010) to another Macbook Pro (mid-2010)?

  Someone accidentally spilled water on my MacBook Pro 'Core i7' 2.66 GHz 15 "mid-2010 and after trying to dry out for a few days, I'm sure that the keyboard is in ruins, and it may be worse (I suspect the logic board like most people), but I need to (would really) keep my documents etc. However, we happen to have an another i7 2.66 GHz 15 "mid 2010 Macbook Pro lying around not being used. I'm a student in computer engineering and I'm pretty good with electronics and figure, that I can use the practice, so I was planning on trying to replace the keyboard myself, but I plan on getting a new MBP in the next few months, so I'd rather do less work if possible. MY MAIN QUESTION IS: since I'm very lucky and I have two little nearly exact same model MBP can put the hard drive of the damaged water MBP (also long the HDD no is not damaged by water) in the MBP running? And if so, what would be my challenges and if it works well enough to use for a month or two? Thank you!

  TLDR: I can take a HDD on a MBP and put it in a similar model without too much difficulty?

  Yes, but you're probably better to put in an envelope instead. If you start another Mac, or in an enclosure closed or internally, a very small number of parameters will not be postponed, and some commercial programs may refuse to run.

  (142891)

• Which hard drive MacBook Pro 2012

  Hello

  I have Non - Retana MacBook Pro 2012, it has its default 500 GB hard drive, it is too small and too slow.

  I have found that I can put a 2 TB in current housing and a second in the SuperDrive slot should I want to.

  But my Question, above all, the it restrictions on the brand that I can use?

  If I wanted a SSD I know not all readers of work with her because of the TRIM settings, but I still don't know what to do if I went to SSD.

  Could I ask for some advice please on this please.

  I have £100 to spend so I was counting on a HARD drive not SSD for the more size.

  Any HDD SATA with a 2.5 form factor "will be compatible with your MBP.  Here are some examples:

  https://eShop.MacSales.com/shop/hard-drives/2.5-notebook/

  If you are considering an SSD, I recommend OWC and Crucial as the best sources.

  Ciao.

• Can't erase hard drive MacBook Pro - "could not disassemble the drive.

  I lost my original install discs Mountain Lion. Spin a MacBook Pro (2011 model).

  I found some articles that show you how to remove & reinstall everything without use of the physical disks. It is to restart my MacBook, pressing command-R, will using this toerase my hard drive and disk utilities

  However, when I try to wipe my drive, this error message appears: "erase disc failed with the error: failed to unmount disk.»

  I have attached a picture of the error that is displayed.

  On the left side of the utility window of disc (see attachment), there where hard disks are displayed, it shows the drive of 500 GB Toshiba MK. Directly below is the option "Macintosh HD."

  This error ONLY appears when I try to erase the disc from Toshiba. But this allowed me to erase the hard drive Macintosh option. Why is this? My drive was nonetheless erased? Or I still have to do something else?

  Thanks in advance for any help on this matter.

  

  Please check this thread: Erase disc failed with the error: failed to unmount the drive. Mavericks running

• Hard drive MacBook Pro broken?

  Hi all

  Last night my Macbook hung - spinning wheel and non-sponsive so difficult to hold down the power button and I think I have hard disk problems:

  I get the grey folder flashing when I start.

  Boot in safe mode does not work.

  Boot in Apple Hardware test does not work

  I can boot to OS X Utilities (cmd + r) and have tried to restore from a backup and it does not find a local disk to restore. I have a backup stored on the time machine.

  I also tried to restore Mac OS X from the same menu - and even when it does not find a local disk to restore.

  I ran disk in the same menu utility and I do not get an option to check the disk (in gray) or erase disc (also grey).

  Can anyone advise on the next steps before I take it down to the Apple store? Far from being a guru on this stuff! MacBook is 13 "and 5 years with 512 MB hard drive. Ran the Mavericks.

  Thanks in advance!

  Common symptoms of a dead hard drive

  Hard drive makes a clicking, whirring, grinding noise ball ping pong or any other type of unusual noises.

  Hard drive does not spin.

  Computer does not recognize the hard drive.

  Slow loading of applications.

  The system freezes and crashes.

  An interesting site - sounds of hard disk by the manufacturer of the drive.

  

• Hard drive has been corrupted and replaced it with the new hard drive but couldn't get the windows genuine back 8

  Original title: recovery of original windows 8

  When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.

  Please help me to get my windows genuine 8 back so I could get additional updates downloaded.

  Hello Vishal,

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.

  See the suggestions posted by Andre Da Costa replied on March 7, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/how-to-get-Windows-8-product-key-in-preloaded/ea0e53ae-3506-4ba2-a092-f266ece7072f?auth=1

  In addition to this, see:

  Product key lost or misplaced (certificate of authenticity) for Windows

  If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.

  Hope this information was useful.

• Can someone please tell me exactly what spec, I need to buy a unit of optical disc (DVD) to replace my MacBook Pro 15 "mid-2009?

  Can someone please tell me exactly what spec, I need to buy a unit of optical disc (DVD) to replace my MacBook Pro 15 "mid-2009? When I try to insert a disc, there is a solid block in the slot.

  I guess that you may have about a Superdrive replacement for your MacBook Pro 2009.

  This link will show you are the specific item and its requirements:

  -040 https://www.iFixit.com/Store/Mac/MacBook-MacBook-Pro-15-inch-8x-SuperDrive/IF185-1? gclid = Cj0KEQjw3ZS-BRD1xu3qw8uS2s4...

• MacBook Pro 13 "mid-2009 - hard disk of cloth before selling it for parts

  I'm selling my MacBook Pro 13 "mid-2009 for parts.  The motherboard crashed.  The laptop is no longer active.  I have all the data of the hard disk (made for me by the repair store), but I still need to remove the hard drive and erase all that it contains.  I can understand how to remove it, but the advice to clean the hard drive would be very appreciated.  Thank you!

  Here are some steps provided by Apple: disk utility (El Capitan): delete a volume

• Replaced logic board

  December 2015 new display iMac with the retina 5 k, 4 GHz Intel Core i7, 16 GB 1867 MHz DDR3. The problem started when I opened a photo in preview or Photoshop. The screen was decided in 2 different colors and have to restart. I couldn't open a pic in the preview and work in Photoshop.

  During this time, my camera was working fine and I used video Skype without problem. Then in January, I sent the new iMac to an Apple dealer to solve this problem, and they changed the logic board. It took 4 months to be repaired, he I just for 2 weeks now, preview works fine and photoshop as well BUT I realize that the camera to the iMac does not and the microphone internal as well.

  I have 2 questions.

  1 - How the camera and the internal microphone can be fix

  2. when they replaced the logic board, I lost my serial number not available.

  Really need help.

  Where are you from?

  You do not have a real Apple Store to take your iMac to any type of repairs?

  You take your iMac to a new Center Apple authorised dealers/repairers and it took them almost 5 months to repair/replace a logic board in your new iMac?

  If a new iMac, your statements read as if they were NOT in the very competent repair center for me.

  I would have set up an adjustment NOT seen my iMac nine 5 months and fry it with, however, other problems.

  Why, no real Apple don't Store to take your iMac to.

  Is this repair center labeled as an authorized Apple dealer/service center or is it some computer shop electronics/generic, simply stating that they can fix Macs. Doesn't seem to be a very competent repair center, at all! IMO.

  I think you need to, once more, it bring for repair as the repair center has not done something right (AFTER 5 MONTHS!).

  If you have any actual Apple store, you can drive to, I bring in for repair and explain what has happened with this new iMac, so far.

  Better yet, you can call Apple directly at 1-800-MYAPPLE and speak with the service the customer of what happened with your new iMac purchase and see what they can do for you.

  Your iMac should NOT have this kind of questions after a month and still problems after waiting 5 MONTHS for the logic of BIG boxes replaecment after just a MONTH of USE?

  Contact Apple directly, first.

  This iMac should NOT have all these difficulties.

  See if they would replace your iMac and the plug by another new unit model.

  If this does not happen, and they offer to continue to fix, then make sure that very soon that you pay and save extended AppleCare that gives your new iMac two additional years of warranty repair.

  Good luck!

• How can I replace a compaq presario C762NR hard drive and reinstall windows?

  My friend brought me his computer and said that he would not start. I tried to boot into safe mode and normal mode and it would not work. It would simply flash a blue screen and restart. After you run a test it is determined that the hard drive has failed. A new laptop is not an option at this point.

  I bought a new hard drive and I ordered the HP recovery disk. What are the appropriate steps to complete this replacement?

  The computer is out of warranty and so is the hard drive. The computer has Windows Vista on it. The failed hard drive was 160 gb, 2.5 ", SATA 1.5 gb/s, 8 MB cache. The news is the same except that it is SATA 3 gb/s.

  This is my first time, replacing a hard drive. I'm confident about it, but I want to just make sure I do it correctly.

  Hello

  All you have to do after replacing the HARD drive is the following.

  Start Notepad and open the CD/DVD drive.  Insert the first disc of recovery.  Hold the power button until the laptop stops.  Press the power button to start the laptop that should now boot from the recovery disk and start the recovery process.

  Kind regards

  DP - K

• Dv7 HP Envy notebook: replacement doesn't have a hard drive from 750 GB to 1 TB

  The hard drive failed on my laptop and needs to be replaced. I have a system on a USB flash drive recovery.  The failed drive is Samsung model ST750LM022. Can I substitute 1 compatible drive to or do I have to use the same size as the original drive? After the physical installation, what is the process of re - install the system recovery USB disk? Any detailed help will be very appreciated.

  A drive of 1 TB replacement inherited or a 500 GB SSD will work fine.

  I highly recommend the SSD because it will boost the performance of your laptop.

  To reinstall the operating syustem is a matter of plug in the USB first, by pressing the button of power and then immediately pressing the ESC key. Who will call the start menu. In the start menu, choose F9 to boot options. Choose the flash drive to boot from, and who should call the HP Recovery Manager. Watch the video below for more details.

• Satellite U840W - replacement SSD with current hybrid HARD drive

  I have this model U840W with a hybrid HARD drive (500 GB + 32 GB SSD cache), I would like to replace it with an mSATA SSD. My warranty is left about 2 months... I understand that if I open the bottom cover, the guarantee may be cancelled.

  Read the following thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=68779

  What I don't understand is the "live in the mid under foot rubber", what is the best way to remove it? This seems to be the real challenge. A directive (preferably with photos)?

  Thanks in adv!

  Hello

  I wouldn't recommend allows you to replace the hybrid HARD drive on your own even if hand warranty isn't valid anymore.
  Why?
  Because the after replacing a drive HARD or SSD, RAID and TSRI (quick start of Intel technology) mode will not be available.

  To rebuild the factory RAID mode and allow the TSRI, special tools are needed and this can be done by the authorized Toshiba maintainer.

  So even if you would be able to remove the bottom cover and hybrids of HARD drive, the new inserted SSD would not be able to achieve the best performance.

• HP Pavilion dv6-6140tx: HP Pavilion dv6-6140tx cable hard drive (the one that connects HD on motherboard)

  Dear members,

  Asking for your help to find the cable from hard drive HP Pavilion dv6-6140tx (the one that connects the hard drive to the motherboard).

  It seems that the cable must have 7 + 15 pins.

  Please help find the right site to buy this cable. I tried ebay, amazon, etc. to no avail.

  Please consider this as an urgent request and help out me. Thank you

  Kind regards

  Vinciane

  Hello

  You need a good part number otherwise very difficult to find/search. If please use part number for drive on the following link and search. This can help

  http://PartSurfer.HP.com/search.aspx?SearchText=QC339PA

  Kind regards.