Should I use Windows update for updates or download Toshiba bullet only?

Similar Questions

• 0 x 80070424: when I use Windows update to download and install hardware (MTP SAMSUNG Mobile device).

  Hi, I got error 0 x 80070424, when I use Windows update to download and install the hardware (SAMSUNG Mobile MTP Device), no matter what Advisor.

  Thank you

  Essam

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you receive the error 0 x 80070424 when you Windows update to download and install the equipment. I suggest you follow the troubleshooting steps to check if this may help.

  1. don't you make changes on the computer before the show?
  2 is the issue limited to Windows update?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  Try the procedure described in the article knowledge base and check if that helps:
  Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall
  http://support.Microsoft.com/kb/968002

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756

  Just reply with the results. I'd be happy to help you further.

• 646 error code and Error Code 643 continue to pop - up when I use Windows update to download updates.

  The program generally I encounter problems is Internet Explorer.

  Hey trouble_free,

  Please follow the instructions in NYintelligentinvestor from the link below.

  Error code 646

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/043e5807-575d-45e7-9320-1dc415b5ee20

  For 643 error, see this article for troubleshooting steps.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates

  http://support.Microsoft.com/kb/958052

  Hope that the information provided above are very useful.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error number: 0 x 80240036 when you try to use Windows Update on a "gross" SP2 system

  I just installed XP SP2 and Office and must now updates.

  Avast! antivirus is installed.

  Hello, John. Windows Update or automatic updates needs SP3 for work. Then please proceed as follows:

  Download the installation of SP3 and IE8 files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  1. physically disconnect from the Internet. Also unplug all unnecessary devices!

  2. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  Select "Turn off automatic updates" and click OK.

  3 IMPORTANT! Because antivirus often programs interfere with the installation of Service Packs, they must be disabled! Therefore:

  set up a clean boot environment:

  1. Click Start, click run, type msconfig and click OK.
  2. The System Configuration utility dialog box appears.
  3. Make sure the general tab is selected, and then click the circle to Start diagnosis .
  4. Click OK.
  5. Turn it back on.

  Note: once this process is completed, you will come back eventually on Normal startup.

  4. install the SP3. Restart TWICE.

  5 move to IE8. Restart TWICE. (Note: it is important to let IE at the level before the upgrade to SP3 IE6.) After you are in SP3, then you can switch IE6 to IE8).

  6 cancel the Diagnostic Mode:

  1. Click Start, click run, type msconfig and click OK.
  2. The System Configuration utility dialog box appears.
  3. Make sure the general tab is selected, and then click the Normal Startup circle.
  4. Click OK.
  5. Turn it back on.

  7. make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  (Now you can physically reconnect to the Internet.)

  8 visit Windows Update to download and install only critical security update (stay away the optional updates!). Restart each time you are prompted.

  9. reactivate the automatic updates.

• is it possible to update device drivers by using windows update 7?

  I have HP Dv6 3050, is it enough to develop software and update drivers using win7 or I need to manually download form download for HP?

  Hello:

  First of all, you can use Windows Update to download and install the latest drivers. If you still have missing drivers after doing this, you will need to manually download the drivers from the support page of your laptop.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=4230544&lang=en&

  Paul

• Code error 8024002d when you use Windows Update to install the update of security for Director 2.6 for windows vista

  I get the error code 8024002d message when you use Windows Update to install the update of security for Director 2.6 for windows vista. It try to install then a window pops up saying: he cannot locate a file called "MM26_ENU [1] .msi '. I have serached my PC and no such file exisits. Grateful for any help. This is supposed to be an update of important safety for Movie Maker.

  Alan McC
  Do you have other accounts of users on this PC?  If you install this update from the main account?

  You should get the number of the update of the updated history list and then download the file here: Microsoft downloads.
  If sure that nothing else is running, and then install the update manually.  Give it a try and let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever I try to use Windows Update for windows XP, I get the error message 0 x 80070424

  This happens when I try to do my updates for school work.

  Hi Benoit,.

  I suggest you to follow the steps in the article and check.

  Error 0 x 80070424 occurs when you use Windows Update, Microsoft Update, or Windows Firewall

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• try to use Windows Update with Windows Mobile 6.1 gets error code 80072ee7

  First of all, I don't know why it is not a category to select Windows Mobile as the "main product" this issue is about.  Microsoft should really put in place the best support for their mobile products.

  That being said, here's my problem.  On my AT & T Tilt, which operates under Windows Mobile 6.1 Professional, I can very well browse the web, use applications that require the transmission of data, connect to a wireless network in the region and can synchronize with my PC Vista very well... but try to use Windows Update to the operating system is up to date always fails each time with the same error code, no matter what I try to do.

  I saw something on the fixing of the same code error on Windows 7, but I don't think that it applies as Mobile 6.1 does not have a "Drivers" folder in the Windows system folder.  Solution Windows 7 involved by changing the "Hosts" file, but I can't seem to find where such a file may be under Mobile 6.1, or if Windows Mobile uses even a Hosts file at all.

  Anyone have any ideas on how to solve this problem?  Or am I pretty much just stuck, until I can afford to get one of the new 6.5 ridiculously expensive smartphones?

  Hi wbdes,

  Since it is a support forum for Windows Vista and 7 consumption, these BONES are for the laptop computer desk/computer system.  You should try to repost your question in the forum specific to Windows Phone for best results.

  http://social.Microsoft.com/forums/en-us/WindowsMobile/threads

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error codes when you use windows update 0 x 643

  Error codes when you use windows update

  Received error code 0 x 643 during the installation of update for Visual C ++ 2010 (KB2467173). What should I do?

  Hey Joe,

  You can check if this article helps.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update

• Error message "Files required to use Windows Update are longer registered or installed on your computer."

  "Files required to use Windows Update are longer registered or installed on your computer" is the message stop & updated. I owned the computer for more than 7 years & used XP all the time. Why does the update fail / stop now? What should I do to get it working?

  Hi B_Tan,

  Please take a look at the following information previously published by TaurArian:

  Some have reported that simply re-register the MSXML3. DLL seems to fix the problem.
  1. click on start.
  2. choose Execute.
  3. in the run box, type: regsvr32 MSXML3. DLL
  Press OK

  If this did not help, you may be re-recorded some files more:

  1. click on start.
  2. choose Execute.
  3. in the run box, type (pressing well after each one): -.

  net stop wuauserv

  Repeat the following:
  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 c:\windows\system32\wups.dll
  regsvr32 c:\windows\system32\wuaueng.dll
  regsvr32 wuaueng1.dll
  regsvr32 c:\windows\system32\dllcache\wucltui.dll
  regsvr32 wuweb.dll
  Regsvr32 MSXML3.dll
  regsvr32 qmgr.dll
  regsvr32 qmgrprxy.dll
  regsvr32 jscript.dll

  net start wuauserv

  FYI -.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  I hope this helps!

• Error message 0x8024400a every time I try to use Windows update.

  I reinstalled XP Home Edition on my laptop using a recovery disc included when I bought my computer. The re-install worked perfectly out I get the 0x8024400a error message everytime I try to use Windows update. In other words, that I can't install updates at all, which means that I can not install anything that uses .net framework, that is quite a lot of software.

  How can I fix this please?

  I don't want to pay for a new operating system when those supplied with the notebook 2004 should work, but doesn't.

  I reinstalled XP Home Edition on my laptop using a recovery disc included when I bought my computer. The re-install worked perfectly out I get the 0x8024400a error message everytime I try to use Windows update. In other words, that I can't install updates at all, which means that I can not install anything that uses .net framework, that is quite a lot of software.

  
  How can I fix this please?

  I don't want to pay for a new operating system when those supplied with the notebook 2004 should work, but doesn't.

  Well, you use an old laptop of 8 years with a 11 year old operating system - it takes a little go extra step to get things.

  I guess you all hardware from the manufacturer drivers so that everything works?  You can verify that you have the latest versions by visiting manually from the manufacturer web page, support and drivers section and go through at least the most important... chipset motherboard, video, audio, network, etc.

  After that...

  Have you installed the Service Packs again?

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now try to get updates.

• Restore to factory state out of the box. Can I install all updates from Microsoft using Windows update or can I install antivirus first before to connect to internet?

  Restore to factory state out of the box. Can I install all updates from Microsoft using Windows update or can I install antivirus first before to connect to internet?

  Currently Windows Vista Home Premium SP1 x 86 (no patches since 2008). Currently, it has no AV and has not been connected to the internet yet. It will be behind a router.

  I had to redo the factory already reset after be connected to the net for 20 minutes and then a bunch of programs kept crashing saying Data Execution Prevention had to close the program StackHash and BEX error when executing update for HP drivers.

  Maybe I installed Kaspersky first next time?

  What should I do?

  Thank you!

  No problem. Install the updates. You can install the anti-virus later.

  Just don't start browsing the inet by updating.

• Do a Windows Update 80070490 error when try to use windows update

  I get an error 80070490 when I try to install the following updates

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  Update for Windows Vista (KB979306)

  They are listed as important updates.  I installed the other updates for Windows Defender, but these do not seem to settle.  My history of update, it seems that the problem began around 12/03/2010.  Is when updates tried to install, but they have not and they tried to settle down since then.  I have to do a system restore.  What do you guys recommend.  I did a Norton Scan, scanned with malware, CC Cleaner Registry tool and run all that much good.  Nothing found.  Fixed all errors registry with CC Cleaner and they still do not work.  Even scanned with windows defender.  Doesn't seem to be a virus, would not exclude it.  Everything seems fine.  Help, please.  Thank you.

  As you say, that you have a "Dell" can also be interested in this:
  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&docid=347576&l=en&s=Gen

  ----------

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair installation (AKA In - Place Upgrade) will not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista updatehttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1/SP2 has been installed.

  Uninstalling SP1 or SP2

  The reason being that the original installation has been updated with SP1/SP2 and so the possibility of upgrade is not available because you have is newer that what you started with so Service Packs must go.

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• Updates fail to download using Windows Update

  I am running Windows XP Professional Sp3 and when you use Windows Update its identifies I need 88 critical updates. I confirm that I am reuqire to install but they constantly fail to download.

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application already installed on this machine?

  3. do you have a Norton or a trial of free McAfee come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  =======================

  You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0x8024402F] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  -Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
  http://support.Microsoft.com/kb/971058

  ~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 80070643 error code when you use Windows update

  I am running Windows 7 Home Premium - 32-bit. I get the error code 80070643 when you use Windows update - it fails on the Office Live add-in 1.5. I uninstalled .net Framework and reinstalled. Office Source Engine turned on, started work. Any ideas how I can fix it. I am running Office 2010 beta as well.

  Assuming that Office 2007 or 2003 is also installed, uninstall try Office 2010 Beta and once again. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft