Should what drivers I after a clean installation of Windows XP Edition family on basis of Compaq d530 CMT model?

Similar Questions

• No Audio - after a clean reinstall of Windows XP Edition family

  Had a network worm in my computer that McAfee didn't detect.

  Advised to do a clean reinstall of Windows, for many that lost all audio, my motherboard is made by Foxconn, any ideas how I can find the correct drivers for this problem?

  Completing all the windows updates since, but still no sound!

  Hello

  Just unzip the files, you should be able to right click on the file and select "extract here". Once the files are extracted, just locate the .exe file and double-click it to launch the installation program, from there just follow the guests to install the driver. You may need to restart the computer for the changes to be detected. :-)

• How can I perform a clean installation of Windows XP Edition family?

  How to do a clean install of xp with the drivers download and windows updates so no internet not downloaded

  Hello
   
  1. have you installed Windows 7 with Windows XP?
  2. is this a new installation?
  3. What is the blue screen of death error code number?
   
   
  Method 1:
  Step 1:
  
  Check if the problem persists in safe mode, to start the computer in safe mode follow the article mentioned below:
  
  Link, please refer to: start your computer in safe mode:
    
   http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  
  Step 2:
   
  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
  Method 2:
  
  Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly
  See the link: http://windows.microsoft.com/en-US/windows7/Startup-Repair-frequently-asked-questions
   
  Reference:
   
  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

• I will back up everything that I want to keep and do a custom (clean) installation for windows 7 Edition home premium.

  Amount of external hard disk space is required for installation files?   I have a 10 gig and a ceiling of 5 gig on my wireless devices, or am I better off buying the staples or office depot installation disc?

  Hello

  "do a custom (clean) installation for windows 7 home premium.

  You say you want to install Windows 7, NOT Vista.

  It is a better idea if you buy you the Windows 7 DVD and then install it from the media.

  You then save model the work of making a Bootable DVD from the download and you also then have a reliable way to reinstall Windows 7 and repair work on this, if you have the need to.

  Before purchasing Windows 7, make sure that your hardware and software will work properly with him.

  Take some time and these checks:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

• Clean install of Windows Vista Edition family

  Due to a Virus, I had to perform a cold install of Windows Vista Edition family.  After completion and activation of the software, I received a message that my product is already in use.  It was a clean install on the same computer that has more than 3 years.

  Hello Steveowe,

  It's normal. To activate it, you use telephone activation. It's free in most countries. See this link from my Web site: http://vistasupport.mvps.org/product_key_already_in_use.htm

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Should what drivers I for any new installation

  Hi all:

  I have X 220

  I want to clean install windows 7 pro

  During installation, I am asked to insert a CD/DVD driver

  and I don't have it.

  I intend to download the drivers from lenovo Web site.

  But there are so many pilots, that one would be sufficient?

  Thanks in advance

  osager wrote:
  Sorry, I edited my original post.
  I want to say that I have X 220
  I WANT TO clean install Windows 7

  Currently, I have a linux system on it.
  So I do not have the ThinkVantage.

  So I bought the DVD of Windows 7 from the store
  and all by installing the DVD of windows 7
  the system prompted me drivers.

  You can make it complicated for help us to you. In this post , you wrote that you have downloaded an ISO file that you found on the net. Here you say you bought a DVD.

  You will need an official Win7 disk (or ISO real) that corresponds to the type of product key of Windows you have. A legitimate Win 7 disc will not ask for drivers.

  Start Win 7 installation disc

  Follow the prompts

  Enjoy

  If you do something else than that, then you don't have a record of Win 7.

• After the installation of Windows XP Edition family, it won't connect to the internet via Ethernet or wireless. I am also unable to activate Windows.

  just installed windows xp home edition on my laptop but it does not connect to the internet (both with a cable and wireless) and it also won't let me activate windows (cant conect to the Server Setup)

  original title: windows xp is a pain

  What is the manufacturer and model of your laptop?

  Visit their web page (the manufacturer) and find their drivers and help section and get the drivers for your model laptop for Windows XP 32-bit.

  You, of course, this done from another machine and using some external media to get it back to the laptop.  You can get * just * wired or wireless network drivers if you wish - you can then use the Internet on the laptop again to get the rest.

• restoration of old files after the clean installation of Vista Windows__

  How can I restore old files after you perform a clean installation of Windows Vista

  If you have an installation clean back to factory settings, you normally wiped your hard drive clean during the process.

  You can try this program:

  http://www.SnapFiles.com/get/Recuva.html

  Recuva is a file undeletion tool that allows you to analyze your hard drives or media cards for files that have been deleted or formatted. It presents you a list of files that have been found, as well as an assessment of their potential for recovery, a preview option, and a hex viewer to inspect the content. You can limit your search to files of a certain type (e.g. images, audio etc.) and choose between a quick and a thorough analysis approach. The program also includes a secure deletion option that allows you to permanently delete files that were found while parsing, to avoid any future recoveries.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Find a windows.old folder, because we don't know exactly how you have installed.

  http://support.Microsoft.com/kb/933209

  How to recover files from an earlier version of Windows in Windows Vista

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If none of the above solves your problem, try data recovery companies.

  Be warned: they are $$$

  See you soon. Mick Murphy - Microsoft partner

• Should what drivers I anyway?

  To start, I have a HP Pavilion11 x 360 PC touch screen running a 64-bit Windows 8 operating system.  I recently had its hard drive corrupted, swapped with another hard drive reformatted, but now there are a few things wrong.

  Keys of light, F2, and F3, change any brightness.

  * USB port to the left is not working / recognize USB drives.

  Touch screen is idle; Stylus and touchscreen reads as follows: No. Pen or press enter is available for this view.

  * In devices and printers, the "Devices" column has the image of a laptop with a triangle of yellow danger with the statutes: troubleshooting needs and the driver is not available. Whenever I try to solve the problems, the program simply said peripheral unknown and unknown driver.

  So, what in the world happened to my old computer? Should what drivers I?

  HP gives you assistance with the drivers.

  http://support.HP.com/us-en/document/bph07165#AbT0

  See you soon.

• HP Pavilion - 15-p264na: audio beats does not open after a clean install of windows 8.1

  Hello

  After a clean install of windows 8.1 the audio beats does not open.

  It appears in the control, but when I click on it nothing happens.

  I have sound, and everything seems to work ok, but I'm curious to know what happened.

  When I go to Device Manager and select audio, video controllers and game, there are 2 features 1 is AMD high definition audio and the other just says high definition audio device.both drivers are up-to-date.

  I look through the forums CIHI and I tried some of the links for the drivers of the itd, but they will not install.

  Any help would be appreciated

  Hello

  Download and reinstall the Realtek HD Audio software at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69164.exe

  When the installation is complete, restart the laptop.

  Kind regards

  DP - K

• After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

  * Original title: hard drive

  I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

  Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

  If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

• Speaker PC under 'Tab speakers properties-levels' option are gone after the new installation of windows 7 Professional.

  2 days ago, I did a clean installation of Windows 7 Professional x 64 on my laptop Packard Bell EasyNote TX86. Since then my laptop makes a beep every time I plug / unplug the power supply.

  Before the fresh install, I was able to disable the cut-off function of the PC "Tab speakers properties-levels" speaker sound but now the PC speaker settings are no longer there (I tried disabling it in the BIOS but no option is also available). What can I do to turn off the beeps?

  I found the problem.

  Audio drivers that installs with windows 7 was incorrect. I downloaded the audio drivers from Packard Bell site, after their installation parameters PC speaker were back and I was able to disable the PC speaker.

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• No volume screen after a clean install of Windows 7 Ultimate

  Recently, I started College, my program gave me a free upgrade to Windows 7 Ultimate. Not having a clean installation since the purchase of this PC, I thought it was the right time to do it. I realize that when clean installation of windows, you will lose a few pilots, after a lot of research I was unable to find anything to display on for volume orders. If someone is able to find something that could solve my problem, it would be much appreciated.

  Thank you, Jason.

  I have a HP G62 225DX

  64 bit

  Windows 7 Ultimate

  Hello

  Download and install the latest version of HP OSD on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55152.exe

  Once done, restart the laptop.

  Kind regards

  DP - K

• came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

  original title: lack of games
  I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

  I have no games. No solitaire, Minesweeper, no nothing.
  How can I, without seeking to erase and reinstall again?

  To activate the built-in Windows 7 games:

  1. click on Start (lower-left) and then on Control Panel.

  2. click on programs and features.

  3. on the left side of the screen, click on 'Windows turn features on or off".

  4. find the entry called games & check the box next to it.

  5. click on OK.

  6 reset.

  If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.